cheng/zlib
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a6c8900ecb
zlib/zconf.h.cmakein

610 lines
20 KiB
Plaintext
Raw Normal View History

zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/* zconf.h -- configuration of the zlib compression library
zlib 1.2.9
2016-12-31 14:41:31 -05:00
* Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#ifndef ZCONF_H
#define ZCONF_H
#cmakedefine Z_PREFIX
#cmakedefine Z_HAVE_UNISTD_H
update zconf for wxwidgets prefix
2022-02-01 12:33:47 -05:00
#ifdef __APPLE__
/* use wxWidgets' configure */
#include "wx/setup.h"
#endif
/* wxWidgets always uses custom prefix to avoid conflicts. */
#define Z_PREFIX_ wx_zlib_
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
/*
* Defining custom Z_PREFIX_ implies using Z_PREFIX.
*/
#if defined(Z_PREFIX_) && !defined(Z_PREFIX)
# define Z_PREFIX 1
#endif
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/*
* If you *really* need a unique prefix for all types and library functions,
* compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
* Even better than compiling with -DZ_PREFIX would be to use configure to set
* this permanently in zconf.h using "./configure --zprefix".
*/
#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
zlib 1.2.5.1
2011-09-11 14:04:49 -04:00
# define Z_PREFIX_SET
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
#define ZLIB_CONCAT2(x, y) x ## y
#define ZLIB_CONCAT(x, y) ZLIB_CONCAT2(x, y)
/*
* If a custom prefix is defined, use it. Otherwise use the default "z_".
*/
#ifdef Z_PREFIX_
# define Z_ADD_PREFIX(name) ZLIB_CONCAT(Z_PREFIX_, name)
#else
# define Z_ADD_PREFIX(name) ZLIB_CONCAT(z_, name)
#endif
/*
* For macros the standard prefix is always used, as we can't define them
* using names constructed using arbitrary Z_PREFIX_ value -- but luckily this
* doesn't matter anyhow, because we can't have link-time conflicts for macros.
*/
#define Z_ADD_PREFIX_STD(name) ZLIB_CONCAT(z_, name)
Fix init macros to use z_ prefix when requested.
2016-12-30 21:18:48 -05:00
/* all linked symbols and init macros */
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define _dist_code Z_ADD_PREFIX(_dist_code)
# define _length_code Z_ADD_PREFIX(_length_code)
# define _tr_align Z_ADD_PREFIX(_tr_align)
# define _tr_flush_bits Z_ADD_PREFIX(_tr_flush_bits)
# define _tr_flush_block Z_ADD_PREFIX(_tr_flush_block)
# define _tr_init Z_ADD_PREFIX(_tr_init)
# define _tr_stored_block Z_ADD_PREFIX(_tr_stored_block)
# define _tr_tally Z_ADD_PREFIX(_tr_tally)
# define adler32 Z_ADD_PREFIX(adler32)
# define adler32_combine Z_ADD_PREFIX(adler32_combine)
# define adler32_combine64 Z_ADD_PREFIX(adler32_combine64)
# define adler32_z Z_ADD_PREFIX(adler32_z)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# ifndef Z_SOLO
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define compress Z_ADD_PREFIX(compress)
# define compress2 Z_ADD_PREFIX(compress2)
# define compressBound Z_ADD_PREFIX(compressBound)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define crc32 Z_ADD_PREFIX(crc32)
# define crc32_combine Z_ADD_PREFIX(crc32_combine)
# define crc32_combine64 Z_ADD_PREFIX(crc32_combine64)
Merge remote-tracking branch 'upstream/develop' into wx Update to zlib 1.2.13.1 which fixes CVE-2022-37434.
2023-01-26 17:36:50 -05:00
# define crc32_combine_gen Z_ADD_PREFIX(crc32_combine_gen)
# define crc32_combine_gen64 Z_ADD_PREFIX(crc32_combine_gen64)
# define crc32_combine_op Z_ADD_PREFIX(crc32_combine_op)
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define crc32_z Z_ADD_PREFIX(crc32_z)
# define deflate Z_ADD_PREFIX(deflate)
# define deflateBound Z_ADD_PREFIX(deflateBound)
# define deflateCopy Z_ADD_PREFIX(deflateCopy)
# define deflateEnd Z_ADD_PREFIX(deflateEnd)
# define deflateGetDictionary Z_ADD_PREFIX(deflateGetDictionary)
# define deflateInit Z_ADD_PREFIX_STD(deflateInit)
# define deflateInit2 Z_ADD_PREFIX_STD(deflateInit2)
# define deflateInit2_ Z_ADD_PREFIX(deflateInit2_)
# define deflateInit_ Z_ADD_PREFIX(deflateInit_)
# define deflateParams Z_ADD_PREFIX(deflateParams)
# define deflatePending Z_ADD_PREFIX(deflatePending)
# define deflatePrime Z_ADD_PREFIX(deflatePrime)
# define deflateReset Z_ADD_PREFIX(deflateReset)
# define deflateResetKeep Z_ADD_PREFIX(deflateResetKeep)
# define deflateSetDictionary Z_ADD_PREFIX(deflateSetDictionary)
# define deflateSetHeader Z_ADD_PREFIX(deflateSetHeader)
# define deflateTune Z_ADD_PREFIX(deflateTune)
# define deflate_copyright Z_ADD_PREFIX(deflate_copyright)
# define get_crc_table Z_ADD_PREFIX(get_crc_table)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# ifndef Z_SOLO
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define gz_error Z_ADD_PREFIX(gz_error)
# define gz_intmax Z_ADD_PREFIX(gz_intmax)
# define gz_strwinerror Z_ADD_PREFIX(gz_strwinerror)
# define gzbuffer Z_ADD_PREFIX(gzbuffer)
# define gzclearerr Z_ADD_PREFIX(gzclearerr)
# define gzclose Z_ADD_PREFIX(gzclose)
# define gzclose_r Z_ADD_PREFIX(gzclose_r)
# define gzclose_w Z_ADD_PREFIX(gzclose_w)
# define gzdirect Z_ADD_PREFIX(gzdirect)
# define gzdopen Z_ADD_PREFIX(gzdopen)
# define gzeof Z_ADD_PREFIX(gzeof)
# define gzerror Z_ADD_PREFIX(gzerror)
# define gzflush Z_ADD_PREFIX(gzflush)
# define gzfread Z_ADD_PREFIX(gzfread)
# define gzfwrite Z_ADD_PREFIX(gzfwrite)
# define gzgetc Z_ADD_PREFIX(gzgetc)
# define gzgetc_ Z_ADD_PREFIX(gzgetc_)
# define gzgets Z_ADD_PREFIX(gzgets)
# define gzoffset Z_ADD_PREFIX(gzoffset)
# define gzoffset64 Z_ADD_PREFIX(gzoffset64)
# define gzopen Z_ADD_PREFIX(gzopen)
# define gzopen64 Z_ADD_PREFIX(gzopen64)
Add gzopen_w() in Windows for wide character path names.
2012-03-16 23:53:09 -04:00
# ifdef _WIN32
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define gzopen_w Z_ADD_PREFIX(gzopen_w)
Add gzopen_w() in Windows for wide character path names.
2012-03-16 23:53:09 -04:00
# endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define gzprintf Z_ADD_PREFIX(gzprintf)
# define gzputc Z_ADD_PREFIX(gzputc)
# define gzputs Z_ADD_PREFIX(gzputs)
# define gzread Z_ADD_PREFIX(gzread)
# define gzrewind Z_ADD_PREFIX(gzrewind)
# define gzseek Z_ADD_PREFIX(gzseek)
# define gzseek64 Z_ADD_PREFIX(gzseek64)
# define gzsetparams Z_ADD_PREFIX(gzsetparams)
# define gztell Z_ADD_PREFIX(gztell)
# define gztell64 Z_ADD_PREFIX(gztell64)
# define gzungetc Z_ADD_PREFIX(gzungetc)
# define gzvprintf Z_ADD_PREFIX(gzvprintf)
# define gzwrite Z_ADD_PREFIX(gzwrite)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define inflate Z_ADD_PREFIX(inflate)
# define inflateBack Z_ADD_PREFIX(inflateBack)
# define inflateBackEnd Z_ADD_PREFIX(inflateBackEnd)
# define inflateBackInit Z_ADD_PREFIX_STD(inflateBackInit)
# define inflateBackInit_ Z_ADD_PREFIX(inflateBackInit_)
# define inflateCodesUsed Z_ADD_PREFIX(inflateCodesUsed)
# define inflateCopy Z_ADD_PREFIX(inflateCopy)
# define inflateEnd Z_ADD_PREFIX(inflateEnd)
# define inflateGetDictionary Z_ADD_PREFIX(inflateGetDictionary)
# define inflateGetHeader Z_ADD_PREFIX(inflateGetHeader)
# define inflateInit Z_ADD_PREFIX_STD(inflateInit)
# define inflateInit2 Z_ADD_PREFIX_STD(inflateInit2)
# define inflateInit2_ Z_ADD_PREFIX(inflateInit2_)
# define inflateInit_ Z_ADD_PREFIX(inflateInit_)
# define inflateMark Z_ADD_PREFIX(inflateMark)
# define inflatePrime Z_ADD_PREFIX(inflatePrime)
# define inflateReset Z_ADD_PREFIX(inflateReset)
# define inflateReset2 Z_ADD_PREFIX(inflateReset2)
# define inflateResetKeep Z_ADD_PREFIX(inflateResetKeep)
# define inflateSetDictionary Z_ADD_PREFIX(inflateSetDictionary)
# define inflateSync Z_ADD_PREFIX(inflateSync)
# define inflateSyncPoint Z_ADD_PREFIX(inflateSyncPoint)
# define inflateUndermine Z_ADD_PREFIX(inflateUndermine)
# define inflateValidate Z_ADD_PREFIX(inflateValidate)
# define inflate_copyright Z_ADD_PREFIX(inflate_copyright)
# define inflate_fast Z_ADD_PREFIX(inflate_fast)
# define inflate_table Z_ADD_PREFIX(inflate_table)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# ifndef Z_SOLO
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define uncompress Z_ADD_PREFIX(uncompress)
# define uncompress2 Z_ADD_PREFIX(uncompress2)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define zError Z_ADD_PREFIX(zError)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# ifndef Z_SOLO
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define zcalloc Z_ADD_PREFIX(zcalloc)
# define zcfree Z_ADD_PREFIX(zcfree)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define zlibCompileFlags Z_ADD_PREFIX(zlibCompileFlags)
# define zlibVersion Z_ADD_PREFIX(zlibVersion)
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/* all zlib typedefs in zlib.h and zconf.h */
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define Byte Z_ADD_PREFIX(Byte)
# define Bytef Z_ADD_PREFIX(Bytef)
# define alloc_func Z_ADD_PREFIX(alloc_func)
# define charf Z_ADD_PREFIX(charf)
# define free_func Z_ADD_PREFIX(free_func)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# ifndef Z_SOLO
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define gzFile Z_ADD_PREFIX(gzFile)
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define gz_header Z_ADD_PREFIX(gz_header)
# define gz_headerp Z_ADD_PREFIX(gz_headerp)
# define in_func Z_ADD_PREFIX(in_func)
# define intf Z_ADD_PREFIX(intf)
# define out_func Z_ADD_PREFIX(out_func)
# define uInt Z_ADD_PREFIX(uInt)
# define uIntf Z_ADD_PREFIX(uIntf)
# define uLong Z_ADD_PREFIX(uLong)
# define uLongf Z_ADD_PREFIX(uLongf)
# define voidp Z_ADD_PREFIX(voidp)
# define voidpc Z_ADD_PREFIX(voidpc)
# define voidpf Z_ADD_PREFIX(voidpf)
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/* all zlib structs in zlib.h and zconf.h */
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define gz_header_s Z_ADD_PREFIX(gz_header_s)
# define internal_state Z_ADD_PREFIX(internal_state)
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
Use prefix when Z_PREFIX is defined for z_errmsg too Even though this variable does already have a "z_" prefix, it still needs to be renamed when Z_PREFIX is defined to avoid name conflicts between the standard build of zlib, not using the prefix, and custom ones, if both happen to be linked into the same executable.
2017-12-07 17:29:46 -05:00
/* variable from zutil.h */
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
# define z_errmsg Z_ADD_PREFIX(z_errmsg)
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
#endif
#if defined(__MSDOS__) && !defined(MSDOS)
# define MSDOS
#endif
#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
# define OS2
#endif
#if defined(_WINDOWS) && !defined(WINDOWS)
# define WINDOWS
#endif
#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
# ifndef WIN32
# define WIN32
# endif
#endif
#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
# ifndef SYS16BIT
# define SYS16BIT
# endif
# endif
#endif
/*
* Compile with -DMAXSEG_64K if the alloc function cannot allocate more
* than 64k bytes at a time (needed on systems with 16-bit int).
*/
#ifdef SYS16BIT
# define MAXSEG_64K
#endif
#ifdef MSDOS
# define UNALIGNED_OK
#endif
#ifdef __STDC_VERSION__
# ifndef STDC
# define STDC
# endif
# if __STDC_VERSION__ >= 199901L
# ifndef STDC99
# define STDC99
# endif
# endif
#endif
#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
# define STDC
#endif
#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
# define STDC
#endif
#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
# define STDC
#endif
#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
# define STDC
#endif
#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
# define STDC
#endif
#ifndef STDC
# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
# define const /* note: need a more gentle solution here */
# endif
#endif
Do not force Z_CONST for C++. Forcing Z_CONST resulted in an issue when compiling Firefox. Now if someone wants to compile zlib as C++ code (which it isn't), now they will need to #define Z_CONST themselves.
2013-04-14 13:31:31 -04:00
#if defined(ZLIB_CONST) && !defined(z_const)
Add #define ZLIB_CONST option to use const in the z_stream interface. This permits compilers to check for the proper treatment of next_in and msg in the z_stream structure. This is an option instead of the default in order to preserve backward compatibility. Some applications make use of the z_stream structure outside of zlib, and perform operations such as free(strm->next_in), which would not be permitted when next_in is const. The #define ZLIB_CONST needs to precede the #include "zlib.h">, in order to make next_in and msg const pointers in the z_stream type.
2011-10-19 02:05:37 -04:00
# define z_const const
#else
# define z_const
#endif
Make z_size_t unsigned long for non-standard C. Also declare z_size_t when compiling solo.
2016-12-31 19:41:36 -05:00
#ifdef Z_SOLO
typedef unsigned long z_size_t;
#else
Fix compile option for when z_size_t needs to be a long long.
2016-12-04 19:50:49 -05:00
# define z_longlong long long
Make z_size_t unsigned long for non-standard C. Also declare z_size_t when compiling solo.
2016-12-31 19:41:36 -05:00
# if defined(NO_SIZE_T)
Create z_size_t and z_ssize_t types. Normally these are set to size_t and ssize_t. But if they do not exist, then they are set to the smallest integer type that can contain a pointer. size_t is unsigned and ssize_t is signed.
2016-12-03 13:27:14 -05:00
typedef unsigned NO_SIZE_T z_size_t;
Make z_size_t unsigned long for non-standard C. Also declare z_size_t when compiling solo.
2016-12-31 19:41:36 -05:00
# elif defined(STDC)
Create z_size_t and z_ssize_t types. Normally these are set to size_t and ssize_t. But if they do not exist, then they are set to the smallest integer type that can contain a pointer. size_t is unsigned and ssize_t is signed.
2016-12-03 13:27:14 -05:00
# include <stddef.h>
typedef size_t z_size_t;
Make z_size_t unsigned long for non-standard C. Also declare z_size_t when compiling solo.
2016-12-31 19:41:36 -05:00
# else
typedef unsigned long z_size_t;
Create z_size_t and z_ssize_t types. Normally these are set to size_t and ssize_t. But if they do not exist, then they are set to the smallest integer type that can contain a pointer. size_t is unsigned and ssize_t is signed.
2016-12-03 13:27:14 -05:00
# endif
Fix compile option for when z_size_t needs to be a long long.
2016-12-04 19:50:49 -05:00
# undef z_longlong
Create z_size_t and z_ssize_t types. Normally these are set to size_t and ssize_t. But if they do not exist, then they are set to the smallest integer type that can contain a pointer. size_t is unsigned and ssize_t is signed.
2016-12-03 13:27:14 -05:00
#endif
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/* Maximum value for memLevel in deflateInit2 */
#ifndef MAX_MEM_LEVEL
# ifdef MAXSEG_64K
# define MAX_MEM_LEVEL 8
# else
# define MAX_MEM_LEVEL 9
# endif
#endif
/* Maximum value for windowBits in deflateInit2 and inflateInit2.
* WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
* created by gzip. (Files created by minigzip can still be extracted by
* gzip.)
*/
#ifndef MAX_WBITS
# define MAX_WBITS 15 /* 32K LZ77 window */
#endif
/* The memory requirements for deflate are (in bytes):
(1 << (windowBits+2)) + (1 << (memLevel+9))
that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
plus a few kilobytes for small objects. For example, if you want to reduce
the default memory requirements from 256K to 128K, compile with
make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
Of course this will generally degrade compression (there's no free lunch).
The memory requirements for inflate are (in bytes) 1 << windowBits
Minor edits to the documentation in source file contents.
2016-11-14 12:19:25 -05:00
that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
for small objects.
*/
/* Type declarations */
#ifndef OF /* function prototypes */
# ifdef STDC
# define OF(args) args
# else
# define OF(args) ()
# endif
#endif
Change ON macro to Z_ARG to avoid application conflicts. Using "ON" was a dumb idea, since it is common to have macros with names like ON and OFF. In fact, defining the OF macro back in 1995 was a bad idea, but now we're stuck with it. Attempts to rename OF to something else breaks many applications.
2011-11-13 16:35:02 -05:00
#ifndef Z_ARG /* function prototypes for stdarg */
zlib 1.2.5.1
2011-09-11 14:04:49 -04:00
# if defined(STDC) || defined(Z_HAVE_STDARG_H)
Change ON macro to Z_ARG to avoid application conflicts. Using "ON" was a dumb idea, since it is common to have macros with names like ON and OFF. In fact, defining the OF macro back in 1995 was a bad idea, but now we're stuck with it. Attempts to rename OF to something else breaks many applications.
2011-11-13 16:35:02 -05:00
# define Z_ARG(args) args
zlib 1.2.5.1
2011-09-11 14:04:49 -04:00
# else
Change ON macro to Z_ARG to avoid application conflicts. Using "ON" was a dumb idea, since it is common to have macros with names like ON and OFF. In fact, defining the OF macro back in 1995 was a bad idea, but now we're stuck with it. Attempts to rename OF to something else breaks many applications.
2011-11-13 16:35:02 -05:00
# define Z_ARG(args) ()
zlib 1.2.5.1
2011-09-11 14:04:49 -04:00
# endif
#endif
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
* to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
* just define FAR to be empty.
*/
#ifdef SYS16BIT
# if defined(M_I86SM) || defined(M_I86MM)
/* MSC small or medium model */
# define SMALL_MEDIUM
# ifdef _MSC_VER
# define FAR _far
# else
# define FAR far
# endif
# endif
# if (defined(__SMALL__) || defined(__MEDIUM__))
/* Turbo C small or medium model */
# define SMALL_MEDIUM
# ifdef __BORLANDC__
# define FAR _far
# else
# define FAR far
# endif
# endif
#endif
#if defined(WINDOWS) || defined(WIN32)
/* If building or using zlib as a DLL, define ZLIB_DLL.
* This is not mandatory, but it offers a little performance increase.
*/
# ifdef ZLIB_DLL
# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
# ifdef ZLIB_INTERNAL
# define ZEXTERN extern __declspec(dllexport)
# else
# define ZEXTERN extern __declspec(dllimport)
# endif
# endif
# endif /* ZLIB_DLL */
/* If building or using zlib with the WINAPI/WINAPIV calling convention,
* define ZLIB_WINAPI.
* Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
*/
# ifdef ZLIB_WINAPI
# ifdef FAR
# undef FAR
# endif
Add WIN32_LEAN_AND_MEAN for windows.h include.
2022-10-03 11:47:03 -04:00
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
# include <windows.h>
/* No need for _export, use ZLIB.DEF instead. */
/* For complete Windows compatibility, use WINAPI, not __stdcall. */
# define ZEXPORT WINAPI
# ifdef WIN32
# define ZEXPORTVA WINAPIV
# else
# define ZEXPORTVA FAR CDECL
# endif
# endif
#endif
#if defined (__BEOS__)
# ifdef ZLIB_DLL
# ifdef ZLIB_INTERNAL
# define ZEXPORT __declspec(dllexport)
# define ZEXPORTVA __declspec(dllexport)
# else
# define ZEXPORT __declspec(dllimport)
# define ZEXPORTVA __declspec(dllimport)
# endif
# endif
#endif
#ifndef ZEXTERN
# define ZEXTERN extern
#endif
#ifndef ZEXPORT
# define ZEXPORT
#endif
#ifndef ZEXPORTVA
# define ZEXPORTVA
#endif
#ifndef FAR
# define FAR
#endif
#if !defined(__MACTYPES__)
typedef unsigned char Byte; /* 8 bits */
#endif
typedef unsigned int uInt; /* 16 bits or more */
typedef unsigned long uLong; /* 32 bits or more */
#ifdef SMALL_MEDIUM
/* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
# define Bytef Byte FAR
#else
typedef Byte FAR Bytef;
#endif
typedef char FAR charf;
typedef int FAR intf;
typedef uInt FAR uIntf;
typedef uLong FAR uLongf;
#ifdef STDC
typedef void const *voidpc;
typedef void FAR *voidpf;
typedef void *voidp;
#else
typedef Byte const *voidpc;
typedef Byte FAR *voidpf;
typedef Byte *voidp;
#endif
Fix type mismatch between get_crc_table() and crc_table. crc_table is made using a four-byte integer (when that can be determined). However get_crc_table() returned a pointer to an unsigned long, which could be eight bytes. This fixes that by creating a new z_crc_t type for the crc_table. This type is also used for the BYFOUR crc calculations that depend on a four-byte type. The four-byte type can now be determined by ./configure, which also solves a problem where ./configure --solo would never use BYFOUR. No the Z_U4 #define indicates that four- byte integer was found either by ./configure or by zconf.h.
2012-04-29 19:18:12 -04:00
#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
# include <limits.h>
Change check for a four-byte type back to hexadecimal.
2013-04-13 18:54:03 -04:00
# if (UINT_MAX == 0xffffffffUL)
Fix type mismatch between get_crc_table() and crc_table. crc_table is made using a four-byte integer (when that can be determined). However get_crc_table() returned a pointer to an unsigned long, which could be eight bytes. This fixes that by creating a new z_crc_t type for the crc_table. This type is also used for the BYFOUR crc calculations that depend on a four-byte type. The four-byte type can now be determined by ./configure, which also solves a problem where ./configure --solo would never use BYFOUR. No the Z_U4 #define indicates that four- byte integer was found either by ./configure or by zconf.h.
2012-04-29 19:18:12 -04:00
# define Z_U4 unsigned
Change check for a four-byte type back to hexadecimal.
2013-04-13 18:54:03 -04:00
# elif (ULONG_MAX == 0xffffffffUL)
Remove runtime check in configure for four-byte integer type. That didn't work when cross-compiling. Simply rely on limits.h. If a compiler does not have limits.h, then zconf.h.in should be modified to define Z_U4 as an unsiged four-byte integer type in order for crc32() to be fast. This also simplifies and makes more portable to check for a four- byte type using limits.h.
2013-03-24 01:27:43 -04:00
# define Z_U4 unsigned long
Change check for a four-byte type back to hexadecimal.
2013-04-13 18:54:03 -04:00
# elif (USHRT_MAX == 0xffffffffUL)
Remove runtime check in configure for four-byte integer type. That didn't work when cross-compiling. Simply rely on limits.h. If a compiler does not have limits.h, then zconf.h.in should be modified to define Z_U4 as an unsiged four-byte integer type in order for crc32() to be fast. This also simplifies and makes more portable to check for a four- byte type using limits.h.
2013-03-24 01:27:43 -04:00
# define Z_U4 unsigned short
Fix type mismatch between get_crc_table() and crc_table. crc_table is made using a four-byte integer (when that can be determined). However get_crc_table() returned a pointer to an unsigned long, which could be eight bytes. This fixes that by creating a new z_crc_t type for the crc_table. This type is also used for the BYFOUR crc calculations that depend on a four-byte type. The four-byte type can now be determined by ./configure, which also solves a problem where ./configure --solo would never use BYFOUR. No the Z_U4 #define indicates that four- byte integer was found either by ./configure or by zconf.h.
2012-04-29 19:18:12 -04:00
# endif
#endif
#ifdef Z_U4
typedef Z_U4 z_crc_t;
#else
typedef unsigned long z_crc_t;
#endif
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_UNISTD_H
#endif
zlib 1.2.5.1
2011-09-11 14:04:49 -04:00
#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_STDARG_H
#endif
zlib 1.2.4.2
2011-09-10 02:34:30 -04:00
#ifdef STDC
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
# ifndef Z_SOLO
# include <sys/types.h> /* for off_t */
# endif
zlib 1.2.4.2
2011-09-10 02:34:30 -04:00
#endif
Add gzvprintf() as an undocumented function in zlib. The function is only available if stdarg.h is available.
2013-03-22 21:32:37 -04:00
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifndef Z_SOLO
# include <stdarg.h> /* for va_list */
# endif
#endif
More fixes for gzopen_w(). Also need to #include <stddef.h> for zlib.h, and need to workaround the inability to use wide characters in constructed error messages with zlib's interface.
2012-03-18 12:29:44 -04:00
#ifdef _WIN32
Avoid including stddef.h on Windows for Z_SOLO compile [Niessink].
2012-05-04 00:23:45 -04:00
# ifndef Z_SOLO
# include <stddef.h> /* for wchar_t */
# endif
More fixes for gzopen_w(). Also need to #include <stddef.h> for zlib.h, and need to workaround the inability to use wide characters in constructed error messages with zlib's interface.
2012-03-18 12:29:44 -04:00
#endif
Repair some damage caused by -Wundef allowance.
2012-03-14 12:18:15 -04:00
/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
zlib 1.2.4.4
2011-09-10 02:34:45 -04:00
* "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
Repair some damage caused by -Wundef allowance.
2012-03-14 12:18:15 -04:00
* though the former does not conform to the LFS document), but considering
zlib 1.2.4.4
2011-09-10 02:34:45 -04:00
* both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
* equivalently requesting no 64-bit operations
*/
Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h.
2013-02-24 03:16:24 -05:00
#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
zlib 1.2.4.4
2011-09-10 02:34:45 -04:00
# undef _LARGEFILE64_SOURCE
#endif
Don't try to include unistd.h on Windows with LLVM.
2022-10-09 20:32:50 -04:00
#ifndef Z_HAVE_UNISTD_H
# ifdef __WATCOMC__
# define Z_HAVE_UNISTD_H
# endif
#endif
#ifndef Z_HAVE_UNISTD_H
# if defined(_LARGEFILE64_SOURCE) && !defined(_WIN32)
# define Z_HAVE_UNISTD_H
# endif
Make sure that unistd.h is included before using _LFS64_LARGEFILE.
2012-03-14 13:30:41 -04:00
#endif
#ifndef Z_SOLO
Don't try to include unistd.h on Windows with LLVM.
2022-10-09 20:32:50 -04:00
# if defined(Z_HAVE_UNISTD_H)
Make sure that unistd.h is included before using _LFS64_LARGEFILE.
2012-03-14 13:30:41 -04:00
# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
# ifdef VMS
# include <unixio.h> /* for off_t */
# endif
# ifndef z_off_t
# define z_off_t off_t
# endif
# endif
#endif
Repair some damage caused by -Wundef allowance.
2012-03-14 12:18:15 -04:00
#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
Allow the use of -Wundef when compiling or using zlib.
2012-03-14 02:19:38 -04:00
# define Z_LFS64
#endif
#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
# define Z_LARGE64
#endif
Repair some damage caused by -Wundef allowance.
2012-03-14 12:18:15 -04:00
#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
Allow the use of -Wundef when compiling or using zlib.
2012-03-14 02:19:38 -04:00
# define Z_WANT64
zlib 1.2.5.1
2011-09-11 14:04:49 -04:00
#endif
Allow specifying custom Z_PREFIX_ instead of "z_" Instead of allowing building 2 versions of the library, one without any prefix and another one with "z_" prefix, make it possible to build as many of variants as needed to allow creating really unique zlib builds not clashing with anything else. Do this by using Z_PREFIX_ macro as the prefix if it is defined. The intended usage is to pass -DZ_PREIFX_=mylib_embedding_zlib_ when building zlib embedded into some other library, so that linking with this library later doesn't conflict with using any other builds of zlib (whether standalone or embedded by a third library).
2017-12-07 17:37:28 -05:00
#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) && defined(Z_PREFIX_)
/*
* It turns out that some of the functions defined above using custom prefix
* will actually be macros in this library build, so they must use standard
* prefix instead. Ugly, but we need to redefine them as we couldn't define
* them correctly from the beginning as Z_WANT64 wasn't available then yet.
*/
# undef adler32_combine
# define adler32_combine Z_ADD_PREFIX_STD(adler32_combine)
# undef crc32_combine
# define crc32_combine Z_ADD_PREFIX_STD(crc32_combine)
# ifndef Z_SOLO
# undef gzoffset
# define gzoffset Z_ADD_PREFIX_STD(gzoffset)
# undef gzopen
# define gzopen Z_ADD_PREFIX_STD(gzopen)
# undef gzseek
# define gzseek Z_ADD_PREFIX_STD(gzseek)
# undef gztell
# define gztell Z_ADD_PREFIX_STD(gztell)
# endif
#endif
Add a ./config --solo option to make zlib subset with no libary use A common request has been the ability to compile zlib to require no other libraries. This --solo option provides that ability. The price is that the gz*, compress*, and uncompress functions are eliminated, and that the user must provide memory allocation and free routines to deflate and inflate when initializing.
2011-10-07 04:57:07 -04:00
#if !defined(SEEK_SET) && !defined(Z_SOLO)
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
# define SEEK_SET 0 /* Seek from beginning of file. */
# define SEEK_CUR 1 /* Seek from current position. */
# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
#endif
zlib 1.2.4.1
2011-09-10 02:34:22 -04:00
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
#ifndef z_off_t
# define z_off_t long
#endif
Make sure that unistd.h is included before using _LFS64_LARGEFILE.
2012-03-14 13:30:41 -04:00
#if !defined(_WIN32) && defined(Z_LARGE64)
zlib 1.2.4.3
2011-09-10 02:34:38 -04:00
# define z_off64_t off64_t
#else
Avoid using __int64 for gcc or solo compilation.
2012-02-20 12:24:30 -05:00
# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
Include zconf.h.cmakein for windows large file support.
2011-10-01 13:19:36 -04:00
# define z_off64_t __int64
# else
Avoid using __int64 for gcc or solo compilation.
2012-02-20 12:24:30 -05:00
# define z_off64_t z_off_t
# endif
Include zconf.h.cmakein for windows large file support.
2011-10-01 13:19:36 -04:00
#endif
zlib 1.2.4.3
2011-09-10 02:34:38 -04:00
zlib 1.2.4-pre1
2011-09-10 02:32:36 -04:00
/* MVS linker does not support external names larger than 8 bytes */
#if defined(__MVS__)
#pragma map(deflateInit_,"DEIN")
#pragma map(deflateInit2_,"DEIN2")
#pragma map(deflateEnd,"DEEND")
#pragma map(deflateBound,"DEBND")
#pragma map(inflateInit_,"ININ")
#pragma map(inflateInit2_,"ININ2")
#pragma map(inflateEnd,"INEND")
#pragma map(inflateSync,"INSY")
#pragma map(inflateSetDictionary,"INSEDI")
#pragma map(compressBound,"CMBND")
#pragma map(inflate_table,"INTABL")
#pragma map(inflate_fast,"INFA")
#pragma map(inflate_copyright,"INCOPY")
#endif
#endif /* ZCONF_H */
Reference in New Issue Copy Permalink