cheng/wxWidgets
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
583d32f6ba
wxWidgets/wxPython/distrib/wxPythonFull.spec.in
Robin Dunn ff006095c2 new configure flags 
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@33645 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
2005-04-16 06:29:37 +00:00

425 lines
12 KiB
RPMSpec
Raw Blame History

#----------------------------------------------------------------------
# Name: wxPython.spec
# Purpose: RPM Build and packaging instructions
#
# Author: Robin Dunn
#
# RCS-ID: $Id$
# Copyright: (c) 2004 by Total Control Software
# Licence: wxWindows license
#----------------------------------------------------------------------
# The following values can be set on the rpmbuild command line with
# --define 'name VALUE' If no value is set on the command line then
# the default value set here will be used instead.
# Which version of Python to build with. Used to assemble python
# binary name so use '2.2', '2.3', etc.
%if %{?pyver:0}%{!?pyver:1}
%define pyver 2.3
%endif
# Which wxWidgets port to build and use. Current acceptable values
# are 'gtk' and 'gtk2'.
%if %{?port:0}%{!?port:1}
%define port gtk2
%endif
# Build in unicode mode? Can only be used if port is gtk2, acceptable
# values are '0' and '1'
%if %{?unicode:0}%{!?unicode:1}
%define unicode 1
%endif
# Should the builtin image and etc. libs be used, or system libs?
# Distro specific RPMs should probably set this to 0, generic ones
# should use 1.
# NOTE: I'm trying 0 for this next release to see if I can get rid of
# this...
%if %{?builtin_libs:0}%{!?builtin_libs:1}
%define builtin_libs 0
%endif
# Should --enable-debug_flag be used in release builds? Using it
# defines __WXDEBUG__ and gives us runtime diagnostics that are turned
# into Python exceptions. (So turning it on is a very helpful thing
# IMO and is recommended.) The code is still compiled with
# optimization flags and and without debug info and such when this
# option is used, it simply turns on some extra code.
%if %{?debug_flag:0}%{!?debug_flag:1}
%define debug_flag 1
%endif
# Used to set the Release tag below. I normally use it to define what
# distro the RPM was build on and also include the version of Python
# it was built with.
%if %{?release:0}%{!?release:1}
%define release 1_py%{pyver}
%endif
#----------------------------------------------------------------------
# Other variables used below
%define pref %{_prefix}
%define python /usr/bin/python%{pyver}
%define tarname @TARNAME@
%define version @VERSION@
%define ver2 @VER2@
%define chartype %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
%define gtktype %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
%define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
%define wxprefbase %{pref}/lib/wxPython
%define wxpref %{wxprefbase}-%{version}-%{port}-%{chartype}
%define pkgname wxPython
# turn off the generation of debuginfo rpm (RH9) ??
%define debug_package %{nil}
#----------------------------------------------------------------------
# Package definition
#----------------------------------------------------------------------
Name: %{pkgname}%{ver2}
Summary: Cross platform GUI toolkit for Python
Version: %{version}
Release: %{release}
Source0: %{tarname}-%{version}.tar.gz
License: wx Library Licence, Version 3
URL: http://wxPython.org/
Packager: Robin Dunn <robin@alldunn.com>
Group: Development/Python
BuildRoot: %{_tmppath}/%{pkgname}-buildroot
Prefix: %{pref}
%description
Cross platform GUI toolkit for Python
%package -n %{pkgname}%{ver2}-%{port}-%{chartype}
Summary: Cross platform GUI toolkit for Python
Group: Development/Python
Requires: %{pkgname}-common
Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}
Provides: wxPython
%description -n %{pkgname}%{ver2}-%{port}-%{chartype}
wxPython is a GUI toolkit for the Python programming language. It
allows Python programmers to create programs with a robust, highly
functional graphical user interface, simply and easily. It is
implemented as a Python extension module (native code) that wraps the
popular wxWidgets cross platform GUI library, which is written in C++.
wxPython is a cross-platform toolkit. The same program will usually
run on multiple platforms without modification. Currently supported
platforms are 32-bit Microsoft Windows, most Unix or unix-like
systems, and Macintosh OS X.
This package contains the wxPython runtime files built for the
wxWidgets %{port} port with %{chartype} character type.
%package -n %{pkgname}-common-%{port}-%{chartype}
Summary: Common files for needed by all wxPython runtimes
Group: Development/Python
Provides: %{pkgname}-common
# They obsolete each other so any of them can be installed over another
# without conflicts
Obsoletes: %{pkgname}-common-gtk-ansi
Obsoletes: %{pkgname}-common-gtk2-ansi
Obsoletes: %{pkgname}-common-gtk2-unicode
%description -n %{pkgname}-common-%{port}-%{chartype}
This package contains the common files needed by any version of the
wxPython runtime. This pacakge also installs a wx.pth file which will
determine which of the installed runtimes is the default version of
wxPython that is imported automatically with a bare "import wx".
%package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
Summary: wxPython development files
Group: Development/Libraries
Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
%description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
This packages contains the headers and etc. for building apps or
Python extension modules that use the same wxWidgets shared libraries
that wxPython uses.
#----------------------------------------------------------------------
%prep
%setup -q -n %{tarname}-%{version}
#----------------------------------------------------------------------
%build
WXDIR=`pwd`
# Configure and build wxWidgets
mkdir bld
cd bld
../configure \
%if %{using_gtk1}
--with-gtk=1 \
%else
--with-gtk=2 \
%endif
--prefix=%{wxpref} \
--enable-monolithic \
--disable-rpath \
--with-opengl \
--enable-geometry \
--enable-optimise \
--enable-sound --with-sdl \
--enable-display \
%if %{unicode}
--enable-unicode \
%else
--disable-unicode \
%endif
%if %{debug_flag}
--enable-debug_flag \
%endif
--disable-debugreport \
%if %{builtin_libs}
--with-libjpeg=builtin \
--with-libpng=builtin \
--with-libtiff=builtin \
--with-zlib=builtin \
%endif
make
make -C contrib/src/animate
make -C contrib/src/gizmos
make -C contrib/src/stc
# Build wxPython
cd $WXDIR/wxPython
%{python} setup.py \
WXPORT=%{port} \
UNICODE=%{unicode} \
EP_ADD_OPTS=1 \
NO_SCRIPTS=1 \
WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
build_ext --rpath=%{wxpref}/lib \
build
#----------------------------------------------------------------------
%install
WXDIR=`pwd`
# Install wxGTK and contribs
cd bld
make prefix=$RPM_BUILD_ROOT%{wxpref} install
make -C contrib/src/animate prefix=$RPM_BUILD_ROOT%{wxpref} install
make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
# Install wxPython for wxGTK
cd $WXDIR/wxPython
%{python} setup.py \
WXPORT=%{port} \
UNICODE=%{unicode} \
EP_ADD_OPTS=1 \
NO_SCRIPTS=1 \
WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
build_ext --rpath=%{wxpref}/lib \
install \
--root=$RPM_BUILD_ROOT
# remove the wx-config symlink, we'll redo it when installing the -devel package
rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
# make sure that debug info is stripped
strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
# Since I want this RPM to be as generic as possible I won't let
# distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
# the #! line to use the real python pathname. Since some distros
# install python 2.2 as python2 and others as python I can't let
# distutils do that otherwise the dependencies will be fouled up.
# Copy them manually instead, leaving the #!/usr/bin/env line intact.
cd $WXDIR/wxPython
mkdir -p $RPM_BUILD_ROOT%{pref}/bin
for s in \
helpviewer \
img2png \
img2py \
img2xpm \
pyalacarte \
pyalamode \
pycrust \
pywrap \
pyshell \
pywxrc \
xrced; do
cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
done
# install KDE & GNOME menu items
mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
for d in distrib/*.desktop; do
install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
done
# install KDE icons
mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
# install Mandrake menu items
mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
?package(%{pkgname}): \\
command="%{_bindir}/pyshell" \\
needs="X11" \\
icon="PyCrust.png" \\
section="Applications/Development/Tools" \\
title="PyShell" \\
longtitle="GUI Python Shell"
?package(%{pkgname}): \\
command="%{_bindir}/pycrust" \\
needs="X11" \\
icon="PyCrust.png" \\
section="Applications/Development/Tools" \\
title="PyCrust" \\
longtitle="GUI Python Shell with Filling"
?package(%{pkgname}): \\
command="%{_bindir}/pyalamode" \\
needs="X11" \\
icon="PyCrust.png" \\
section="Applications/Development/Tools" \\
title="PyAlaMode" \\
longtitle="GUI Python Shell with Filling and editor windows"
?package(%{pkgname}): \\
command="%{_bindir}/xrced" \\
needs="X11" \\
icon="XRCed.png" \\
section="Applications/Development/Tools" \\
title="XRCed" \\
longtitle="wxPython XRC resource editor"
EOF
#----------------------------------------------------------------------
%post -n %{pkgname}%{ver2}-%{port}-%{chartype}
if [ ! -e %{wxprefbase} ]; then
ln -s %{pkgname}-%{version}-%{port}-%{chartype} %{wxprefbase}
fi
%preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
if [ -L %{wxprefbase} ]; then
if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
rm -f %{wxprefbase}
fi
fi
%post -n %{pkgname}-common-%{port}-%{chartype}
# This is done on Mandrake to update its menus:
if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
%postun -n %{pkgname}-common-%{port}-%{chartype}
# This is done on Mandrake to update its menus:
if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
%post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
cd %{wxpref}/bin
ln -s ../lib/wx/config/%{port}-%{chartype}* wx-config
%preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
rm %{wxpref}/bin/wx-config
#----------------------------------------------------------------------
%clean
[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
#----------------------------------------------------------------------
%files -n %{pkgname}%{ver2}-%{port}-%{chartype}
%defattr(-,root,root)
%doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
%doc wxPython/docs/*
%dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
%dir %{wxpref}
%dir %{wxpref}/lib
%{wxpref}/lib/libwx_gtk*
%{wxpref}/share
%files -n %{pkgname}-common-%{port}-%{chartype}
%defattr(-,root,root)
%{pref}/lib*/python%{pyver}/site-packages/wxversion.*
%{pref}/lib*/python%{pyver}/site-packages/wx.pth
%{_bindir}/*
%{_datadir}/applnk/Development/*
%{_datadir}/applications/*
%{_datadir}/icons/hicolor/*/apps/*
%{_datadir}/pixmaps/*
%{_libdir}/menu/*
%files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
%defattr(-,root,root)
%{wxpref}/include
%{wxpref}/lib/wx
%dir %{wxpref}/bin
#----------------------------------------------------------------------
# end of file
Reference in New Issue View Git Blame Copy Permalink