dnl --------------------------------------------------------------------------- dnl Author: wxWidgets development team, dnl Francesco Montorsi, dnl Bob McCown (Mac-testing) dnl Creation date: 24/11/2001 dnl --------------------------------------------------------------------------- dnl =========================================================================== dnl Table of Contents of this macro file: dnl ------------------------------------- dnl dnl SECTION A: wxWidgets main macros dnl - WX_CONFIG_OPTIONS dnl - WX_CONFIG_CHECK dnl - WXRC_CHECK dnl - WX_STANDARD_OPTIONS dnl - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS dnl - WX_DETECT_STANDARD_OPTION_VALUES dnl dnl SECTION B: wxWidgets-related utilities dnl - WX_LIKE_LIBNAME dnl - WX_ARG_ENABLE_YESNOAUTO dnl - WX_ARG_WITH_YESNOAUTO dnl dnl SECTION C: messages to the user dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_END dnl - WX_BOOLOPT_SUMMARY dnl dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra dnl debug output on stdout from these macros. dnl =========================================================================== dnl --------------------------------------------------------------------------- dnl Macros for wxWidgets detection. Typically used in configure.in as: dnl dnl AC_ARG_ENABLE(...) dnl AC_ARG_WITH(...) dnl ... dnl WX_CONFIG_OPTIONS dnl ... dnl ... dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1]) dnl if test "$wxWin" != 1; then dnl AC_MSG_ERROR([ dnl wxWidgets must be installed on your system dnl but wx-config script couldn't be found. dnl dnl Please check that wx-config is in path, the directory dnl where wxWidgets libraries are installed (returned by dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or dnl equivalent variable and wxWidgets version is 2.3.4 or above. dnl ]) dnl fi dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS" dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY" dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY" dnl dnl LIBS="$LIBS $WX_LIBS" dnl dnl If you want to support standard --enable-debug/unicode/shared options, you dnl may do the following: dnl dnl ... dnl AC_CANONICAL_TARGET dnl dnl # define configure options dnl WX_CONFIG_OPTIONS dnl WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared]) dnl dnl # basic configure checks dnl ... dnl dnl # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE dnl WX_DEBUG=$DEBUG dnl WX_UNICODE=$UNICODE dnl dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS dnl WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS]) dnl WX_DETECT_STANDARD_OPTION_VALUES dnl dnl # write the output files dnl AC_CONFIG_FILES([Makefile ...]) dnl AC_OUTPUT dnl dnl # optional: just to show a message to the user dnl WX_STANDARD_OPTIONS_SUMMARY_MSG dnl dnl --------------------------------------------------------------------------- dnl --------------------------------------------------------------------------- dnl WX_CONFIG_OPTIONS dnl dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and dnl --wx-config command line options dnl --------------------------------------------------------------------------- AC_DEFUN([WX_CONFIG_OPTIONS], [ AC_ARG_WITH(wxdir, [ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH], [ wx_config_name="$withval/wx-config" wx_config_args="--inplace"]) AC_ARG_WITH(wx-config, [ --with-wx-config=CONFIG wx-config script to use (optional)], wx_config_name="$withval" ) AC_ARG_WITH(wx-prefix, [ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)], wx_config_prefix="$withval", wx_config_prefix="") AC_ARG_WITH(wx-exec-prefix, [ --with-wx-exec-prefix=PREFIX Exec prefix where wxWidgets is installed (optional)], wx_config_exec_prefix="$withval", wx_config_exec_prefix="") ]) dnl Helper macro for checking if wx version is at least $1.$2.$3, set's dnl wx_ver_ok=yes if it is: AC_DEFUN([_WX_PRIVATE_CHECK_VERSION], [ wx_ver_ok="" if test "x$WX_VERSION" != x ; then if test $wx_config_major_version -gt $1; then wx_ver_ok=yes else if test $wx_config_major_version -eq $1; then if test $wx_config_minor_version -gt $2; then wx_ver_ok=yes else if test $wx_config_minor_version -eq $2; then if test $wx_config_micro_version -ge $3; then wx_ver_ok=yes fi fi fi fi fi fi ]) dnl --------------------------------------------------------------------------- dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS dnl [, WX-OPTIONAL-LIBS]]]]]) dnl dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME dnl environment variable to override the default name of the wx-config script dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this dnl case the macro won't even waste time on tests for its existence. dnl dnl Optional WX-LIBS argument contains comma- or space-separated list of dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS dnl and WX_LIBS_STATIC will contain flags to link with all of the core dnl wxWidgets libraries. dnl dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config dnl invocation command in present. It can be used to fine-tune lookup of dnl best wxWidgets build available. dnl dnl Optional WX-OPTIONAL-LIBS argument contains comma- or space-separated list dnl of wxWidgets libraries to link against if they are available. dnl WX-OPTIONAL-LIBS is supported on version 2.9.0 and later. dnl dnl Example use: dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net] dnl [--unicode --debug]) dnl --------------------------------------------------------------------------- dnl dnl Get the cflags and libraries from the wx-config script dnl AC_DEFUN([WX_CONFIG_CHECK], [ dnl do we have wx-config name: it can be wx-config or wxd-config or ... if test x${WX_CONFIG_NAME+set} != xset ; then WX_CONFIG_NAME=wx-config fi if test "x$wx_config_name" != x ; then WX_CONFIG_NAME="$wx_config_name" fi dnl deal with optional prefixes if test x$wx_config_exec_prefix != x ; then wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix" WX_LOOKUP_PATH="$wx_config_exec_prefix/bin" fi if test x$wx_config_prefix != x ; then wx_config_args="$wx_config_args --prefix=$wx_config_prefix" WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin" fi if test "$cross_compiling" = "yes"; then wx_config_args="$wx_config_args --host=$host_alias" fi dnl don't search the PATH if WX_CONFIG_NAME is absolute filename if test -x "$WX_CONFIG_NAME" ; then AC_MSG_CHECKING(for wx-config) WX_CONFIG_PATH="$WX_CONFIG_NAME" AC_MSG_RESULT($WX_CONFIG_PATH) else AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH") fi if test "$WX_CONFIG_PATH" != "no" ; then WX_VERSION="" min_wx_version=ifelse([$1], ,2.2.1,$1) if test -z "$5" ; then AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version]) else AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)]) fi dnl don't add the libraries (4th argument) to this variable as this would dnl result in an error when it's used with --version below WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5" WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null` wx_config_major_version=`echo $WX_VERSION | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` wx_config_minor_version=`echo $WX_VERSION | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` wx_config_micro_version=`echo $WX_VERSION | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` wx_requested_major_version=`echo $min_wx_version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` wx_requested_minor_version=`echo $min_wx_version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` wx_requested_micro_version=`echo $min_wx_version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version], [$wx_requested_minor_version], [$wx_requested_micro_version]) if test -n "$wx_ver_ok"; then AC_MSG_RESULT(yes (version $WX_VERSION)) wx_optional_libs="" _WX_PRIVATE_CHECK_VERSION(2,9,0) if test -n "$wx_ver_ok" -a -n "$6"; then wx_optional_libs="--optional-libs $6" fi WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4 $wx_optional_libs` dnl is this even still appropriate? --static is a real option now dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is dnl what the user actually wants, making this redundant at best. dnl For now keep it in case anyone actually used it in the past. AC_MSG_CHECKING([for wxWidgets static library]) WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 $wx_optional_libs 2>/dev/null` if test "x$WX_LIBS_STATIC" = "x"; then AC_MSG_RESULT(no) else AC_MSG_RESULT(yes) fi dnl starting with version 2.2.6 wx-config has --cppflags argument wx_has_cppflags="" if test $wx_config_major_version -gt 2; then wx_has_cppflags=yes else if test $wx_config_major_version -eq 2; then if test $wx_config_minor_version -gt 2; then wx_has_cppflags=yes else if test $wx_config_minor_version -eq 2; then if test $wx_config_micro_version -ge 6; then wx_has_cppflags=yes fi fi fi fi fi dnl starting with version 2.7.0 wx-config has --rescomp option wx_has_rescomp="" if test $wx_config_major_version -gt 2; then wx_has_rescomp=yes else if test $wx_config_major_version -eq 2; then if test $wx_config_minor_version -ge 7; then wx_has_rescomp=yes fi fi fi if test "x$wx_has_rescomp" = x ; then dnl cannot give any useful info for resource compiler WX_RESCOMP= else WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp` fi if test "x$wx_has_cppflags" = x ; then dnl no choice but to define all flags like CFLAGS WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4` WX_CPPFLAGS=$WX_CFLAGS WX_CXXFLAGS=$WX_CFLAGS WX_CFLAGS_ONLY=$WX_CFLAGS WX_CXXFLAGS_ONLY=$WX_CFLAGS else dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4` WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4` WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4` WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"` WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"` fi ifelse([$2], , :, [$2]) else if test "x$WX_VERSION" = x; then dnl no wx-config at all AC_MSG_RESULT(no) else AC_MSG_RESULT(no (version $WX_VERSION is not new enough)) fi WX_CFLAGS="" WX_CPPFLAGS="" WX_CXXFLAGS="" WX_LIBS="" WX_LIBS_STATIC="" WX_RESCOMP="" if test ! -z "$5"; then wx_error_message=" The configuration you asked for $PACKAGE_NAME requires a wxWidgets build with the following settings: $5 but such build is not available. To see the wxWidgets builds available on this system, please use 'wx-config --list' command. To use the default build, returned by 'wx-config --selected-config', use the options with their 'auto' default values." fi wx_error_message=" The requested wxWidgets build couldn't be found. $wx_error_message If you still get this error, then check that 'wx-config' is in path, the directory where wxWidgets libraries are installed (returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH or equivalent variable and wxWidgets version is $1 or above." ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3]) fi else WX_CFLAGS="" WX_CPPFLAGS="" WX_CXXFLAGS="" WX_LIBS="" WX_LIBS_STATIC="" WX_RESCOMP="" ifelse([$3], , :, [$3]) fi AC_SUBST(WX_CPPFLAGS) AC_SUBST(WX_CFLAGS) AC_SUBST(WX_CXXFLAGS) AC_SUBST(WX_CFLAGS_ONLY) AC_SUBST(WX_CXXFLAGS_ONLY) AC_SUBST(WX_LIBS) AC_SUBST(WX_LIBS_STATIC) AC_SUBST(WX_VERSION) AC_SUBST(WX_RESCOMP) dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness): WX_VERSION_MAJOR="$wx_config_major_version" WX_VERSION_MINOR="$wx_config_minor_version" WX_VERSION_MICRO="$wx_config_micro_version" AC_SUBST(WX_VERSION_MAJOR) AC_SUBST(WX_VERSION_MINOR) AC_SUBST(WX_VERSION_MICRO) ]) dnl --------------------------------------------------------------------------- dnl Get information on the wxrc program for making C++, Python and xrs dnl resource files. dnl dnl AC_ARG_ENABLE(...) dnl AC_ARG_WITH(...) dnl ... dnl WX_CONFIG_OPTIONS dnl ... dnl WX_CONFIG_CHECK(2.6.0, wxWin=1) dnl if test "$wxWin" != 1; then dnl AC_MSG_ERROR([ dnl wxWidgets must be installed on your system dnl but wx-config script couldn't be found. dnl dnl Please check that wx-config is in path, the directory dnl where wxWidgets libraries are installed (returned by dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or dnl equivalent variable and wxWidgets version is 2.6.0 or above. dnl ]) dnl fi dnl dnl WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0]) dnl if test "x$HAVE_WXRC" != x1; then dnl AC_MSG_ERROR([ dnl The wxrc program was not installed or not found. dnl dnl Please check the wxWidgets installation. dnl ]) dnl fi dnl dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS" dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY" dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY" dnl dnl LDFLAGS="$LDFLAGS $WX_LIBS" dnl --------------------------------------------------------------------------- dnl --------------------------------------------------------------------------- dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) dnl dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS dnl resources. The variable WXRC will be set and substituted in the configure dnl script and Makefiles. dnl dnl Example use: dnl WXRC_CHECK([wxrc=1], [wxrc=0]) dnl --------------------------------------------------------------------------- dnl dnl wxrc program from the wx-config script dnl AC_DEFUN([WXRC_CHECK], [ AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler]) if test "x$WX_CONFIG_NAME" = x; then AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.]) else AC_MSG_CHECKING([for wxrc]) if test "x$WXRC" = x ; then dnl wx-config --utility is a new addition to wxWidgets: _WX_PRIVATE_CHECK_VERSION(2,5,3) if test -n "$wx_ver_ok"; then WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc` fi fi if test "x$WXRC" = x ; then AC_MSG_RESULT([not found]) ifelse([$2], , :, [$2]) else AC_MSG_RESULT([$WXRC]) ifelse([$1], , :, [$1]) fi AC_SUBST(WXRC) fi ]) dnl --------------------------------------------------------------------------- dnl WX_LIKE_LIBNAME([output-var] [prefix], [name]) dnl dnl Sets the "output-var" variable to the name of a library named with same dnl wxWidgets rule. dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets dnl the $lib variable to: dnl 'mine_gtk2ud_test-2.8' dnl if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28 dnl --------------------------------------------------------------------------- AC_DEFUN([WX_LIKE_LIBNAME], [ wx_temp="$2""_""$WX_PORT" dnl add the [u][d] string if test "$WX_UNICODE" = "1"; then wx_temp="$wx_temp""u" fi if test "$WX_DEBUG" = "1"; then wx_temp="$wx_temp""d" fi dnl complete the name of the lib wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR" dnl save it in the user's variable $1=$wx_temp ]) dnl --------------------------------------------------------------------------- dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO dnl dnl Two little custom macros which define the ENABLE/WITH configure arguments. dnl Macro arguments: dnl $1 = the name of the --enable / --with feature dnl $2 = the name of the variable associated dnl $3 = the description of that feature dnl $4 = the default value for that feature dnl $5 = additional action to do in case option is given with "yes" value dnl --------------------------------------------------------------------------- AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO], [AC_ARG_ENABLE($1, AS_HELP_STRING([--enable-$1],[$3 (default is $4)]), [], [enableval="$4"]) dnl Show a message to the user about this option AC_MSG_CHECKING([for the --enable-$1 option]) if test "$enableval" = "yes" ; then AC_MSG_RESULT([yes]) $2=1 $5 elif test "$enableval" = "no" ; then AC_MSG_RESULT([no]) $2=0 elif test "$enableval" = "auto" ; then AC_MSG_RESULT([will be automatically detected]) $2="" else AC_MSG_ERROR([ Unrecognized option value (allowed values: yes, no, auto) ]) fi ]) AC_DEFUN([WX_ARG_WITH_YESNOAUTO], [AC_ARG_WITH($1, AS_HELP_STRING([--with-$1],[$3 (default is $4)]), [], [withval="$4"]) dnl Show a message to the user about this option AC_MSG_CHECKING([for the --with-$1 option]) if test "$withval" = "yes" ; then AC_MSG_RESULT([yes]) $2=1 $5 dnl NB: by default we don't allow --with-$1=no option dnl since it does not make much sense ! elif test "$6" = "1" -a "$withval" = "no" ; then AC_MSG_RESULT([no]) $2=0 elif test "$withval" = "auto" ; then AC_MSG_RESULT([will be automatically detected]) $2="" else AC_MSG_ERROR([ Unrecognized option value (allowed values: yes, auto) ]) fi ]) dnl --------------------------------------------------------------------------- dnl WX_STANDARD_OPTIONS([options-to-add]) dnl dnl Adds to the configure script one or more of the following options: dnl --enable-[debug|unicode|shared|wxshared|wxdebug] dnl --with-[gtk|msw|motif|x11|mac|dfb] dnl --with-wxversion dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED, dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values. dnl dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the dnl --enable-unicode option (in boolean format) while the second indicates dnl if wxWidgets was built in Unicode mode (and still is in boolean format). dnl --------------------------------------------------------------------------- AC_DEFUN([WX_STANDARD_OPTIONS], [ dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if dnl the $1 argument contains respectively the debug,unicode or shared options. dnl be careful here not to set debug flag if only "wxdebug" was specified ifelse(regexp([$1], [\bdebug]), [-1],, [WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])]) ifelse(index([$1], [unicode]), [-1],, [WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])]) ifelse(regexp([$1], [\bshared]), [-1],, [WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])]) dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option dnl which must be able to accept the auto|gtk1|gtk2|msw|... values ifelse(index([$1], [toolkit]), [-1],, [ AC_ARG_WITH([toolkit], AS_HELP_STRING([--with-toolkit],[Build against a specific wxWidgets toolkit (default is auto)]), [], [withval="auto"]) dnl Show a message to the user about this option AC_MSG_CHECKING([for the --with-toolkit option]) if test "$withval" = "auto" ; then AC_MSG_RESULT([will be automatically detected]) TOOLKIT="" else TOOLKIT="$withval" dnl PORT must be one of the allowed values if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a "$TOOLKIT" != "gtk3" -a \ "$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \ "$TOOLKIT" != "osx_carbon" -a "$TOOLKIT" != "osx_cocoa" -a \ "$TOOLKIT" != "dfb" -a "$TOOLKIT" != "x11" -a "$TOOLKIT" != "base"; then AC_MSG_ERROR([ Unrecognized option value (allowed values: auto, gtk1, gtk2, gtk3, msw, motif, osx_carbon, osx_cocoa, dfb, x11, base) ]) fi AC_MSG_RESULT([$TOOLKIT]) fi ]) dnl ****** IMPORTANT ******* dnl Unlike for the UNICODE setting, you can build your program in dnl shared mode against a static build of wxWidgets. Thus we have the dnl following option which allows these mixtures. E.g. dnl dnl ./configure --disable-shared --with-wxshared dnl dnl will build your library in static mode against the first available dnl shared build of wxWidgets. dnl dnl Note that's not possible to do the viceversa: dnl dnl ./configure --enable-shared --without-wxshared dnl dnl Doing so you would try to build your library in shared mode against a static dnl build of wxWidgets. This is not possible (you would mix PIC and non PIC code) ! dnl A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES dnl (where we know what 'auto' should be expanded to). dnl dnl If you try to build something in ANSI mode against a UNICODE build dnl of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets, dnl then at best you'll get ton of linking errors ! dnl ************************ ifelse(index([$1], [wxshared]), [-1],, [ WX_ARG_WITH_YESNOAUTO( [wxshared], [WX_SHARED], [Force building against a shared build of wxWidgets, even if --disable-shared is given], [auto], [], [1]) ]) dnl Just like for SHARED and WX_SHARED it may happen that some adventurous dnl peoples will want to mix a wxWidgets release build with a debug build of dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables. ifelse(index([$1], [wxdebug]), [-1],, [ WX_ARG_WITH_YESNOAUTO( [wxdebug], [WX_DEBUG], [Force building against a debug build of wxWidgets, even if --disable-debug is given], [auto], [], [1]) ]) dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values ifelse(index([$1], [wxversion]), [-1],, [ AC_ARG_WITH([wxversion], AS_HELP_STRING([--with-wxversion],[Build against a specific version of wxWidgets (default is auto)]), [], [withval="auto"]) dnl Show a message to the user about this option AC_MSG_CHECKING([for the --with-wxversion option]) if test "$withval" = "auto" ; then AC_MSG_RESULT([will be automatically detected]) WX_RELEASE="" else wx_requested_major_version=`echo $withval | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'` wx_requested_minor_version=`echo $withval | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'` dnl both vars above must be exactly 1 digit if test "${#wx_requested_major_version}" != "1" -o \ "${#wx_requested_minor_version}" != "1" ; then AC_MSG_ERROR([ Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0) ]) fi WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version" AC_MSG_RESULT([$WX_RELEASE]) fi ]) if test "$WX_DEBUG_CONFIGURE" = "1"; then echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG" echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE" echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED" echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT" echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE" fi ]) dnl --------------------------------------------------------------------------- dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS dnl dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values dnl which were specified. dnl Thus this macro needs to be called only once all options have been set. dnl --------------------------------------------------------------------------- AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS], [ if test "$WX_SHARED" = "1" ; then WXCONFIG_FLAGS="--static=no " elif test "$WX_SHARED" = "0" ; then WXCONFIG_FLAGS="--static=yes " fi if test "$WX_DEBUG" = "1" ; then WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes " elif test "$WX_DEBUG" = "0" ; then WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no " fi dnl The user should have set WX_UNICODE=UNICODE if test "$WX_UNICODE" = "1" ; then WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes " elif test "$WX_UNICODE" = "0" ; then WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no " fi if test -n "$TOOLKIT" ; then WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT " fi if test -n "$WX_RELEASE" ; then WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE " fi dnl strip out the last space of the string WXCONFIG_FLAGS=${WXCONFIG_FLAGS% } if test "$WX_DEBUG_CONFIGURE" = "1"; then echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS" fi ]) dnl --------------------------------------------------------------------------- dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG]) dnl dnl Sets WX_$RESULTVAR to the value of $RESULTVAR if it's defined. Otherwise, dnl auto-detect the value by checking for the presence of STRING in dnl $WX_SELECTEDCONFIG (which is supposed to be set by caller) and set dnl WX_$RESULTVAR to either 0 or 1, also outputting "yes" or "no" after MSG. dnl --------------------------------------------------------------------------- AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR], [ if test -z "$$1" ; then dnl The user does not have particular preferences for this option; dnl so we will detect the wxWidgets relative build setting and use it AC_MSG_CHECKING([$3]) dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2 dnl string or to 0 otherwise. dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it dnl doesn't work; we use 'expr STRING : REGEXP' instead WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*") if test "$WX_$1" != "0"; then WX_$1=1 AC_MSG_RESULT([yes]) else WX_$1=0 AC_MSG_RESULT([no]) fi else dnl Use the setting given by the user WX_$1=$$1 fi ]) dnl --------------------------------------------------------------------------- dnl WX_DETECT_STANDARD_OPTION_VALUES dnl dnl Detects the values of the following variables: dnl 1) WX_RELEASE dnl 2) WX_UNICODE dnl 3) WX_DEBUG dnl 4) WX_SHARED (and also WX_STATIC) dnl 5) WX_PORT dnl from the previously selected wxWidgets build; this macro in fact must be dnl called *after* calling the WX_CONFIG_CHECK macro. dnl dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set dnl by WX_CONFIG_CHECK macro dnl --------------------------------------------------------------------------- AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES], [ dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits, dnl while WX_RELEASE only the major.minor ones. WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR" if test $WX_RELEASE -lt 26 ; then AC_MSG_ERROR([ Cannot detect the wxWidgets configuration for the selected wxWidgets build since its version is $WX_VERSION < 2.6.0; please install a newer version of wxWidgets. ]) fi dnl The wx-config we are using understands the "--selected_config" dnl option which returns an easy-parseable string ! WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config) if test "$WX_DEBUG_CONFIGURE" = "1"; then echo "[[dbg]] Using wx-config --selected-config" echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG" fi dnl we could test directly for WX_SHARED with a line like: dnl _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared], dnl [if wxWidgets was built in SHARED mode]) dnl but wx-config --selected-config DOES NOT outputs the 'shared' dnl word when wx was built in shared mode; it rather outputs the dnl 'static' word when built in static mode. if test "$WX_SHARED" = "1"; then STATIC=0 elif test "$WX_SHARED" = "0"; then STATIC=1 fi dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables _WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode], [if wxWidgets was built with UNICODE enabled]) _WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug], [if wxWidgets was built in DEBUG mode]) _WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static], [if wxWidgets was built in STATIC mode]) dnl init WX_SHARED from WX_STATIC if test "$WX_STATIC" != "0"; then WX_SHARED=0 else WX_SHARED=1 fi AC_SUBST(WX_UNICODE) AC_SUBST(WX_DEBUG) AC_SUBST(WX_SHARED) dnl detect the WX_PORT to use if test -z "$TOOLKIT" ; then dnl The user does not have particular preferences for this option; dnl so we will detect the wxWidgets relative build setting and use it AC_MSG_CHECKING([which wxWidgets toolkit was selected]) WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*") WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*") WX_GTKPORT3=$(expr "$WX_SELECTEDCONFIG" : ".*gtk3.*") WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*") WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*") WX_OSXCOCOAPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_cocoa.*") WX_OSXCARBONPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_carbon.*") WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*") WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*") WX_BASEPORT=$(expr "$WX_SELECTEDCONFIG" : ".*base.*") WX_PORT="unknown" if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi if test "$WX_GTKPORT3" != "0"; then WX_PORT="gtk3"; fi if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi if test "$WX_OSXCOCOAPORT" != "0"; then WX_PORT="osx_cocoa"; fi if test "$WX_OSXCARBONPORT" != "0"; then WX_PORT="osx_carbon"; fi if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi if test "$WX_BASEPORT" != "0"; then WX_PORT="base"; fi dnl NOTE: backward-compatible check for wx2.8; in wx2.9 the mac dnl ports are called 'osx_cocoa' and 'osx_carbon' (see above) WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*") if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi dnl check at least one of the WX_*PORT has been set ! if test "$WX_PORT" = "unknown" ; then AC_MSG_ERROR([ Cannot detect the currently installed wxWidgets port ! Please check your 'wx-config --cxxflags'... ]) fi AC_MSG_RESULT([$WX_PORT]) else dnl Use the setting given by the user WX_PORT=$TOOLKIT fi AC_SUBST(WX_PORT) if test "$WX_DEBUG_CONFIGURE" = "1"; then echo "[[dbg]] Values of all WX_* options after final detection:" echo "[[dbg]] WX_DEBUG: $WX_DEBUG" echo "[[dbg]] WX_UNICODE: $WX_UNICODE" echo "[[dbg]] WX_SHARED: $WX_SHARED" echo "[[dbg]] WX_RELEASE: $WX_RELEASE" echo "[[dbg]] WX_PORT: $WX_PORT" fi dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when dnl the user gives the options: dnl ./configure --enable-shared --without-wxshared dnl or just do dnl ./configure --enable-shared dnl but there is only a static build of wxWidgets available. if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then AC_MSG_ERROR([ Cannot build shared library against a static build of wxWidgets ! This error happens because the wxWidgets build which was selected has been detected as static while you asked to build $PACKAGE_NAME as shared library and this is not possible. Use the '--disable-shared' option to build $PACKAGE_NAME as static library or '--with-wxshared' to use wxWidgets as shared library. ]) fi dnl now we can finally update the options to their final values if they dnl were not already set if test -z "$UNICODE" ; then UNICODE=$WX_UNICODE fi if test -z "$SHARED" ; then SHARED=$WX_SHARED fi if test -z "$TOOLKIT" ; then TOOLKIT=$WX_PORT fi dnl respect the DEBUG variable adding the optimize/debug flags and also dnl define a BUILD variable in case the user wants to use it dnl dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we dnl don't need to set them, too if test "$DEBUG" = "1"; then BUILD="debug" CXXFLAGS="$CXXFLAGS -g -O0" CFLAGS="$CFLAGS -g -O0" elif test "$DEBUG" = "0"; then BUILD="release" CXXFLAGS="$CXXFLAGS -O2" CFLAGS="$CFLAGS -O2" fi ]) dnl --------------------------------------------------------------------------- dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for], dnl [what to print when var is 1], dnl [what to print when var is 0]) dnl dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0. dnl This macro mainly exists just to make configure.ac scripts more readable. dnl dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments dnl if you want that m4 avoid to throw away the spaces prefixed to the dnl argument value. dnl --------------------------------------------------------------------------- AC_DEFUN([WX_BOOLOPT_SUMMARY], [ if test "x$$1" = "x1" ; then echo $2 elif test "x$$1" = "x0" ; then echo $3 else echo "$1 is $$1" fi ]) dnl --------------------------------------------------------------------------- dnl WX_STANDARD_OPTIONS_SUMMARY_MSG dnl dnl Shows a summary message to the user about the WX_* variable contents. dnl This macro is used typically at the end of the configure script. dnl --------------------------------------------------------------------------- AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG], [ echo echo " The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION" echo " has the following settings:" WX_BOOLOPT_SUMMARY([WX_DEBUG], [" - DEBUG build"], [" - RELEASE build"]) WX_BOOLOPT_SUMMARY([WX_UNICODE], [" - UNICODE mode"], [" - ANSI mode"]) WX_BOOLOPT_SUMMARY([WX_SHARED], [" - SHARED mode"], [" - STATIC mode"]) echo " - VERSION: $WX_VERSION" echo " - PORT: $WX_PORT" ]) dnl --------------------------------------------------------------------------- dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END dnl dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info dnl about the configuration of the package which used the wxpresets. dnl dnl Typical usage: dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN dnl echo " - Package setting 1: $SETTING1" dnl echo " - Package setting 2: $SETTING1" dnl ... dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_END dnl dnl --------------------------------------------------------------------------- AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN], [ echo echo " ----------------------------------------------------------------" echo " Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed." echo " Summary of main configuration settings for $PACKAGE_NAME:" WX_BOOLOPT_SUMMARY([DEBUG], [" - DEBUG build"], [" - RELEASE build"]) WX_BOOLOPT_SUMMARY([UNICODE], [" - UNICODE mode"], [" - ANSI mode"]) WX_BOOLOPT_SUMMARY([SHARED], [" - SHARED mode"], [" - STATIC mode"]) ]) AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END], [ WX_STANDARD_OPTIONS_SUMMARY_MSG echo echo " Now, just run make." echo " ----------------------------------------------------------------" echo ]) dnl --------------------------------------------------------------------------- dnl Deprecated macro wrappers dnl --------------------------------------------------------------------------- AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS]) AC_DEFUN([AM_PATH_WXCONFIG], [ WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5]) ]) AC_DEFUN([AM_PATH_WXRC], [WXRC_CHECK([$1],[$2])])