///////////////////////////////////////////////////////////////////////////// // Name: stream.h // Purpose: interface of wxStreamBase and its derived classes // Author: wxWidgets team // RCS-ID: $Id$ // Licence: wxWindows license ///////////////////////////////////////////////////////////////////////////// /** @class wxCountingOutputStream wxCountingOutputStream is a specialized output stream which does not write any data anywhere, instead it counts how many bytes would get written if this were a normal stream. This can sometimes be useful or required if some data gets serialized to a stream or compressed by using stream compression and thus the final size of the stream cannot be known other than pretending to write the stream. One case where the resulting size would have to be known is if the data has to be written to a piece of memory and the memory has to be allocated before writing to it (which is probably always the case when writing to a memory stream). @library{wxbase} @category{streams} */ class wxCountingOutputStream : public wxOutputStream { public: /** Creates a wxCountingOutputStream object. */ wxCountingOutputStream(); /** Destructor. */ virtual ~wxCountingOutputStream(); /** Returns the current size of the stream. */ size_t GetSize() const; }; /** @class wxBufferedInputStream This stream acts as a cache. It caches the bytes read from the specified input stream (see wxFilterInputStream). It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes. This class may not be used without some other stream to read the data from (such as a file stream or a memory stream). @library{wxbase} @category{streams} @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream */ class wxBufferedInputStream : public wxFilterInputStream { public: /** Constructor using the provided buffer or default. @param stream The associated low-level stream. @param buffer The buffer to use if non-@NULL. Notice that the ownership of this buffer is taken by the stream, i.e. it will delete it. If this parameter is @NULL a default 1KB buffer is used. */ wxBufferedInputStream(wxInputStream& stream, wxStreamBuffer *buffer = NULL); /** Constructor allowing to specify the size of the buffer. This is just a more convenient alternative to creating a wxStreamBuffer of the given size and using the other overloaded constructor of this class. @param stream The associated low-level stream. @param bufsize The size of the buffer, in bytes. @since 2.9.0 */ wxBufferedInputStream(wxInputStream& stream, size_t bufsize); /** Destructor. */ virtual ~wxBufferedInputStream(); }; /** @class wxStreamBuffer @todo WRITE A DESCRIPTION @library{wxbase} @category{streams} @see wxStreamBase */ class wxStreamBuffer { public: /** Constructor, creates a new stream buffer using @a stream as a parent stream and mode as the IO mode. @param stream The parent stream. @param mode Can be: wxStreamBuffer::read, wxStreamBuffer::write, wxStreamBuffer::read_write. One stream can have many stream buffers but only one is used internally to pass IO call (e.g. wxInputStream::Read() -> wxStreamBuffer::Read()), but you can call directly wxStreamBuffer::Read without any problems. Note that all errors and messages linked to the stream are stored in the stream, not the stream buffers: @code streambuffer.Read(...); streambuffer2.Read(...); // This call erases previous error messages set by 'streambuffer' @endcode @see SetBufferIO() */ wxStreamBuffer(wxStreamBase& stream, BufMode mode); /** Constructor for an input buffer of the specified size. Using it is equivalent to using the constructor above with read mode and calling SetBufferIO() but is more convenient. @since 2.9.0 */ wxStreamBuffer(wxInputStream& stream, size_t bufsize); /** Constructor for an output buffer of the specified size. Using it is equivalent to using the constructor above with write mode and calling SetBufferIO() but is more convenient. @since 2.9.0 */ wxStreamBuffer(wxOutputStream& stream, size_t bufsize); /** Constructor; creates a new empty stream buffer which won't flush any data to a stream. mode specifies the type of the buffer (read, write, read_write). This stream buffer has the advantage to be stream independent and to work only on memory buffers but it is still compatible with the rest of the wxStream classes. You can write, read to this special stream and it will grow (if it is allowed by the user) its internal buffer. Briefly, it has all functionality of a "normal" stream. @warning The "read_write" mode doesn't currently work for standalone stream buffers. @see SetBufferIO() */ wxStreamBuffer(BufMode mode); /** Copy constructor. This method initializes the stream buffer with the data of the specified stream buffer. The new stream buffer has the same attributes, size, position and they share the same buffer. This will cause problems if the stream to which the stream buffer belong is destroyed and the newly cloned stream buffer continues to be used, trying to call functions in the (destroyed) stream. It is advised to use this feature only in very local area of the program. */ wxStreamBuffer(const wxStreamBuffer& buffer); /** Destructor. It finalizes all IO calls and frees all internal buffers if necessary. */ wxStreamBuffer(); /** Fill the IO buffer. */ bool FillBuffer(); /** Toggles the fixed flag. Usually this flag is toggled at the same time as @e flushable. This flag allows (when it has the @false value) or forbids (when it has the @true value) the stream buffer to resize dynamically the IO buffer. @see SetBufferIO() */ void Fixed(bool fixed); /** Flushes the IO buffer. */ bool FlushBuffer(); /** Toggles the flushable flag. If @a flushable is disabled, no data are sent to the parent stream. */ void Flushable(bool flushable); /** Returns a pointer on the end of the stream buffer. */ void* GetBufferEnd() const; /** Returns a pointer on the current position of the stream buffer. */ void* GetBufferPos() const; /** Returns the size of the buffer. */ size_t GetBufferSize() const; /** Returns a pointer on the start of the stream buffer. */ void* GetBufferStart() const; /** Gets a single char from the stream buffer. It acts like the Read() call. @warning You aren't directly notified if an error occurred during the IO call. @see Read() */ virtual char GetChar(); /** Returns the amount of available data in the buffer. */ size_t GetDataLeft(); /** Returns the current position (counted in bytes) in the stream buffer. */ size_t GetIntPosition() const; /** Returns the amount of bytes read during the last IO call to the parent stream. */ size_t GetLastAccess() const; /** Puts a single char to the stream buffer. @warning You aren't directly notified if an error occurred during the IO call. @see Read() */ virtual void PutChar(char c); /** Reads a block of the specified size and stores the data in buffer. This function tries to read from the buffer first and if more data has been requested, reads more data from the associated stream and updates the buffer accordingly until all requested data is read. @return It returns the size of the data read. If the returned size is different of the specified size, an error has occurred and should be tested using GetLastError(). */ virtual size_t Read(void* buffer, size_t size); /** Copies data to @a buffer. The function returns when @a buffer is full or when there isn't any more data in the current buffer. @see Write() */ Return value size_t Read(wxStreamBuffer* buffer); /** Resets to the initial state variables concerning the buffer. */ void ResetBuffer(); /** Changes the current position. Parameter @a mode may be one of the following: - @b wxFromStart: The position is counted from the start of the stream. - @b wxFromCurrent: The position is counted from the current position of the stream. - @b wxFromEnd: The position is counted from the end of the stream. @return Upon successful completion, it returns the new offset as measured in bytes from the beginning of the stream. Otherwise, it returns wxInvalidOffset. */ virtual wxFileOffset Seek(wxFileOffset pos, wxSeekMode mode); /** Specifies which pointers to use for stream buffering. You need to pass a pointer on the start of the buffer end and another on the end. The object will use this buffer to cache stream data. It may be used also as a source/destination buffer when you create an empty stream buffer (See wxStreamBuffer::wxStreamBuffer). @remarks When you use this function, you will have to destroy the IO buffers yourself after the stream buffer is destroyed or don't use it anymore. In the case you use it with an empty buffer, the stream buffer will not resize it when it is full. @see wxStreamBuffer(), Fixed(), Flushable() */ void SetBufferIO(char* buffer_start, char* buffer_end); /** Destroys or invalidates the previous IO buffer and allocates a new one of the specified size. @warning All previous pointers aren't valid anymore. @remarks The created IO buffer is growable by the object. @see Fixed(), Flushable() */ void SetBufferIO(size_t bufsize); /** Sets the current position (in bytes) in the stream buffer. @warning Since it is a very low-level function, there is no check on the position: specifying an invalid position can induce unexpected results. */ void SetIntPosition(size_t pos); /** Returns the parent stream of the stream buffer. */ wxStreamBase* Stream(); /** Gets the current position in the stream. This position is calculated from the @e real position in the stream and from the internal buffer position: so it gives you the position in the @e real stream counted from the start of the stream. @return Returns the current position in the stream if possible, wxInvalidOffset in the other case. */ virtual wxFileOffset Tell() const; /** Truncates the buffer to the current position. @note Truncate() cannot be used to enlarge the buffer. This is usually not needed since the buffer expands automatically. */ void Truncate(); /** Writes a block of the specified size using data of buffer. The data are cached in a buffer before being sent in one block to the stream. */ virtual size_t Write(const void* buffer, size_t size); /** See Read(). */ size_t Write(wxStreamBuffer* buffer); }; /** @class wxOutputStream wxOutputStream is an abstract base class which may not be used directly. @library{wxbase} @category{streams} */ class wxOutputStream : public wxStreamBase { public: /** Creates a dummy wxOutputStream object. */ wxOutputStream(); /** Destructor. */ virtual ~wxOutputStream(); /** Closes the stream, returning @false if an error occurs. The stream is closed implicitly in the destructor if Close() is not called explicitly. If this stream wraps another stream or some other resource such as a file, then the underlying resource is closed too if it is owned by this stream, or left open otherwise. */ virtual bool Close(); /** Returns the number of bytes written during the last Write(). It may return 0 even if there is no error on the stream if it is only temporarily impossible to write to it. */ virtual size_t LastWrite() const; /** Puts the specified character in the output queue and increments the stream position. */ void PutC(char c); /** Changes the stream current position. @param pos Offset to seek to. @param mode One of wxFromStart, wxFromEnd, wxFromCurrent. @return The new stream position or wxInvalidOffset on error. */ virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart); /** Returns the current stream position. */ virtual wxFileOffset TellO() const; /** Writes up to the specified amount of bytes using the data of buffer. Note that not all data can always be written so you must check the number of bytes really written to the stream using LastWrite() when this function returns. In some cases (for example a write end of a pipe which is currently full) it is even possible that there is no errors and zero bytes have been written. This function returns a reference on the current object, so the user can test any states of the stream right away. */ wxOutputStream Write(const void* buffer, size_t size); /** Reads data from the specified input stream and stores them in the current stream. The data is read until an error is raised by one of the two streams. */ wxOutputStream Write(wxInputStream& stream_in); }; /** Enumeration values used by wxFilterClassFactory. */ enum wxStreamProtocolType { wxSTREAM_PROTOCOL, //!< wxFileSystem protocol (should be only one). wxSTREAM_MIMETYPE, //!< MIME types the stream handles. wxSTREAM_ENCODING, //!< The HTTP Content-Encodings the stream handles. wxSTREAM_FILEEXT //!< File extensions the stream handles. }; /** @class wxFilterClassFactory Allows the creation of filter streams to handle compression formats such as gzip and bzip2. For example, given a filename you can search for a factory that will handle it and create a stream to decompress it: @code factory = wxFilterClassFactory::Find(filename, wxSTREAM_FILEEXT); if (factory) stream = factory-NewStream(new wxFFileInputStream(filename)); @endcode wxFilterClassFactory::Find can also search for a factory by MIME type, HTTP encoding or by wxFileSystem protocol. The available factories can be enumerated using wxFilterClassFactory::GetFirst() and wxFilterClassFactory::GetNext(). @library{wxbase} @category{streams} @see wxFilterInputStream, wxFilterOutputStream, wxArchiveClassFactory, @ref overview_archive */ class wxFilterClassFactory : public wxObject { public: /** Returns @true if this factory can handle the given protocol, MIME type, HTTP encoding or file extension. When using @c wxSTREAM_FILEEXT for the second parameter, the first parameter can be a complete filename rather than just an extension. */ bool CanHandle(const wxString& protocol, wxStreamProtocolType type = wxSTREAM_PROTOCOL) const; /** A static member that finds a factory that can handle a given protocol, MIME type, HTTP encoding or file extension. Returns a pointer to the class factory if found, or @NULL otherwise. It does not give away ownership of the factory. When using @c wxSTREAM_FILEEXT for the second parameter, the first parameter can be a complete filename rather than just an extension. */ static const wxFilterClassFactory* Find(const wxString& protocol, wxStreamProtocolType type = wxSTREAM_PROTOCOL); //@{ /** GetFirst and GetNext can be used to enumerate the available factories. For example, to list them: @code wxString list; const wxFilterClassFactory *factory = wxFilterClassFactory::GetFirst(); while (factory) { list << factory->GetProtocol() << _T("\n"); factory = factory->GetNext(); } @endcode GetFirst()/GetNext() return a pointer to a factory or @NULL if no more are available. They do not give away ownership of the factory. */ static const wxFilterClassFactory* GetFirst() const; const wxFilterClassFactory* GetNext() const; //@} /** Returns the wxFileSystem protocol supported by this factory. Equivalent to @code wxString(*GetProtocols()) @endcode. */ wxString GetProtocol() const; /** Returns the protocols, MIME types, HTTP encodings or file extensions supported by this factory, as an array of null terminated strings. It does not give away ownership of the array or strings. For example, to list the file extensions a factory supports: @code wxString list; const wxChar *const *p; for (p = factory->GetProtocols(wxSTREAM_FILEEXT); *p; p++) list << *p << _T("\n"); @endcode */ virtual const wxChar * const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const = 0; //@{ /** Create a new input or output stream to decompress or compress a given stream. If the parent stream is passed as a pointer then the new filter stream takes ownership of it. If it is passed by reference then it does not. */ wxFilterInputStream* NewStream(wxInputStream& stream) const; wxFilterOutputStream* NewStream(wxOutputStream& stream) const; wxFilterInputStream* NewStream(wxInputStream* stream) const; wxFilterOutputStream* NewStream(wxOutputStream* stream) const; //@} /** Remove the file extension of @a location if it is one of the file extensions handled by this factory. */ wxString PopExtension(const wxString& location) const; /** Adds this class factory to the list returned by GetFirst()/GetNext(). It is not necessary to do this to use the filter streams. It is usually used when implementing streams, typically the implementation will add a static instance of its factory class. It can also be used to change the order of a factory already in the list, bringing it to the front. This isn't a thread safe operation so can't be done when other threads are running that will be using the list. The list does not take ownership of the factory. */ void PushFront(); /** Removes this class factory from the list returned by GetFirst()/GetNext(). Removing from the list isn't a thread safe operation so can't be done when other threads are running that will be using the list. The list does not own the factories, so removing a factory does not delete it. */ void Remove(); }; /** @class wxFilterOutputStream A filter stream has the capability of a normal stream but it can be placed on top of another stream. So, for example, it can compress, encrypt the data which are passed to it and write them to another stream. @note The use of this class is exactly the same as of wxOutputStream. Only a constructor differs and it is documented below. @library{wxbase} @category{streams} @see wxFilterClassFactory, wxFilterInputStream */ class wxFilterOutputStream : public wxOutputStream { public: //@{ /** Initializes a "filter" stream. If the parent stream is passed as a pointer then the new filter stream takes ownership of it. If it is passed by reference then it does not. */ wxFilterOutputStream(wxOutputStream& stream); wxFilterOutputStream(wxOutputStream* stream); //@} }; /** @class wxFilterInputStream A filter stream has the capability of a normal stream but it can be placed on top of another stream. So, for example, it can uncompress or decrypt the data which are read from another stream and pass it to the requester. @note The interface of this class is the same as that of wxInputStream. Only a constructor differs and it is documented below. @library{wxbase} @category{streams} @see wxFilterClassFactory, wxFilterOutputStream */ class wxFilterInputStream : public wxInputStream { public: //@{ /** Initializes a "filter" stream. If the parent stream is passed as a pointer then the new filter stream takes ownership of it. If it is passed by reference then it does not. */ wxFilterInputStream(wxInputStream& stream); wxFilterInputStream(wxInputStream* stream); //@} }; /** @class wxBufferedOutputStream This stream acts as a cache. It caches the bytes to be written to the specified output stream (See wxFilterOutputStream). The data is only written when the cache is full, when the buffered stream is destroyed or when calling SeekO(). This class may not be used without some other stream to write the data to (such as a file stream or a memory stream). @library{wxbase} @category{streams} @see wxStreamBuffer, wxOutputStream */ class wxBufferedOutputStream : public wxFilterOutputStream { public: /** Constructor using the provided buffer or default. @param stream The associated low-level stream. @param buffer The buffer to use if non-@NULL. Notice that the ownership of this buffer is taken by the stream, i.e. it will delete it. If this parameter is @NULL a default 1KB buffer is used. */ wxBufferedOutputStream(wxOutputStream& stream, wxStreamBuffer *buffer = NULL); /** Constructor allowing to specify the size of the buffer. This is just a more convenient alternative to creating a wxStreamBuffer of the given size and using the other overloaded constructor of this class. @param stream The associated low-level stream. @param bufsize The size of the buffer, in bytes. @since 2.9.0 */ wxBufferedOutputStream(wxOutputStream& stream, size_t bufsize); /** Destructor. Calls Sync() and destroys the internal buffer. */ virtual ~wxBufferedOutputStream(); /** Calls Sync() and changes the stream position. */ virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart); /** Flushes the buffer and calls Sync() on the parent stream. */ virtual void Sync(); }; /** @class wxInputStream wxInputStream is an abstract base class which may not be used directly. @library{wxbase} @category{streams} */ class wxInputStream : public wxStreamBase { public: /** Creates a dummy input stream. */ wxInputStream(); /** Destructor. */ virtual ~wxInputStream(); /** Returns @true if some data is available in the stream right now, so that calling Read() wouldn't block. */ virtual bool CanRead() const; /** Returns @true after an attempt has been made to read past the end of the stream. */ virtual bool Eof() const; /** Returns the first character in the input queue and removes it, blocking until it appears if necessary. */ int GetC(); /** Returns the last number of bytes read. */ virtual size_t LastRead() const; /** Returns the first character in the input queue without removing it. */ virtual char Peek(); /** Reads the specified amount of bytes and stores the data in buffer. @warning The buffer absolutely needs to have at least the specified size. @return This function returns a reference on the current object, so the user can test any states of the stream right away. */ wxInputStream Read(void* buffer, size_t size); /** Reads data from the input queue and stores it in the specified output stream. The data is read until an error is raised by one of the two streams. @return This function returns a reference on the current object, so the user can test any states of the stream right away. */ wxInputStream& Read(wxOutputStream& stream_out); /** Changes the stream current position. @param pos Offset to seek to. @param mode One of wxFromStart, wxFromEnd, wxFromCurrent. @return The new stream position or wxInvalidOffset on error. */ virtual wxFileOffset SeekI(wxFileOffset pos, wxSeekMode mode = wxFromStart); /** Returns the current stream position. */ virtual wxFileOffset TellI() const; /** This function is only useful in read mode. It is the manager of the "Write-Back" buffer. This buffer acts like a temporary buffer where data which has to be read during the next read IO call are put. This is useful when you get a big block of data which you didn't want to read: you can replace them at the top of the input queue by this way. Be very careful about this call in connection with calling SeekI() on the same stream. Any call to SeekI() will invalidate any previous call to this method (otherwise you could SeekI() to one position, "unread" a few bytes there, SeekI() to another position and data would be either lost or corrupted). @return Returns the amount of bytes saved in the Write-Back buffer. */ size_t Ungetch(const char* buffer, size_t size); /** This function acts like the previous one except that it takes only one character: it is sometimes shorter to use than the generic function. */ Return value bool Ungetch(char c); }; /** These enumeration values are returned by various functions in the context of wxStream classes. */ enum wxStreamError { wxSTREAM_NO_ERROR = 0, //!< No error occurred. wxSTREAM_EOF, //!< EOF reached in Read() or similar. wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call. wxSTREAM_READ_ERROR //!< generic read error on the last read call. }; /** @class wxStreamBase This class is the base class of most stream related classes in wxWidgets. It must not be used directly. @library{wxbase} @category{streams} @see wxStreamBuffer */ class wxStreamBase { public: /** Creates a dummy stream object. It doesn't do anything. */ wxStreamBase(); /** Destructor. */ virtual ~wxStreamBase(); /** This function returns the last error. */ wxStreamError GetLastError() const; /** Returns the length of the stream in bytes. If the length cannot be determined (this is always the case for socket streams for example), returns @c wxInvalidOffset. @since 2.5.4 */ virtual wxFileOffset GetLength() const; /** This function returns the size of the stream. For example, for a file it is the size of the file. @warning There are streams which do not have size by definition, such as socket streams. In that cases, GetSize returns 0 so you should always test its return value. */ virtual size_t GetSize() const; /** Returns @true if no error occurred on the stream. @see GetLastError() */ virtual bool IsOk() const; /** Returns @true if the streams supports seeking to arbitrary offsets. */ virtual bool IsSeekable() const; /** Internal function. It is called when the stream wants to read data of the specified size. It should return the size that was actually read. */ size_t OnSysRead(void* buffer, size_t bufsize); /** See OnSysRead(). */ size_t OnSysWrite(const void* buffer, size_t bufsize); protected: /** Internal function. It is called when the stream needs to change the current position. */ virtual wxFileOffset OnSysSeek(wxFileOffset pos, wxSeekMode mode); /** Internal function. It is called when the stream needs to know the real position. */ virtual wxFileOffset OnSysTell() const; };