wxWidgets for X11 installation ------------------------------ IMPORTANT NOTE: If you experience problems installing, please re-read these instructions and other related files (todo.txt, bugs.txt and osname.txt for your platform if it exists) carefully before mailing wxwin-users or the author. Preferably, try to fix the problem first and then send a patch to the author. When sending bug reports tell us what version of wxWidgets you are using (including the beta) and what compiler on what system. One example: wxX11 2.8.0, gcc 2.95.4, Redhat 6.2 First steps ----------- - Download wxX11-x.y.z.tgz, where x.y.z is the version number. Download documentation in a preferred format, such as wxWidgets-HTML.zip or wxWidgets-PDF.zip. - Make a directory such as ~/wx and unarchive the files into this directory. - It is recommended that you install bison and flex; using yacc and lex may require tweaking of the makefiles. You also need libXpm if you want to have XPM support in wxWidgets (recommended). - You can now use configure to build wxWidgets and the samples. Using configure is the recommended way to build the library. If it doesn't work for you for whatever reason, please report it (together with detailed information about your platform and the (relevant part of) contents of config.log file). COMPILING USING CONFIGURE ========================= * The simplest case ------------------- If you compile wxWidgets on Linux for the first time and don't like to read install instructions just do (in the base dir): > ./configure --with-x11 > make > su > make install > ldconfig > exit Afterwards you can continue with > make > su > make install > ldconfig > exit If you want to remove wxWidgets on Unix you can do this: > su > make uninstall > ldconfig > exit * The expert case ----------------- If you want to do some more serious cross-platform programming with wxWidgets, such as for GTK and X11, you can now build two complete libraries and use them concurrently. For this end, you have to create a directory for each build of wxWidgets - you may also want to create different versions of wxWidgets and test them concurrently. Most typically, this would be a version configured with --enable-debug_flag and one without. Note, that only one build can currently be installed, so you'd have to use local version of the library for that purpose. For building three versions (one GTK, one X11 and a debug version of the GTK source) you'd do this: md buildx11 cd buildx11 ../configure --with-x11 make cd .. md buildgtk cd buildgtk ../configure --with-gtk make cd .. md buildgtkd cd buildgtkd ../configure --with-gtk --enable-debug_flag make cd .. * The simplest errors --------------------- You get errors during compilation: The reason is that you probably have a broken compiler. GCC 2.8 and earlier versions and egcs are likely to cause problems due to incomplete support for C++ and optimisation bugs. Best to use GCC 2.95 or later. You get immediate segfault when starting any sample or application: This is either due to having compiled the library with different flags or options than your program - typically you might have the __WXDEBUG__ option set for the library but not for your program - or due to using a compiler with optimisation bugs. * The simplest program ---------------------- Now create your super-application myfoo.cpp and compile anywhere with g++ myfoo.cpp `wx-config --libs --cxxflags` -o myfoo * General --------- The Unix variants of wxWidgets use GNU configure. If you have problems with your make use GNU make instead. If you have general problems with installation, see the wxWidgets website at https://www.wxwidgets.org/ for newest information. If you still don't have any success, please send a bug report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF X, WHAT DISTRIBUTION YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect, but I tried... * GUI libraries --------------- wxWidgets/X11 requires the X11 library to be installed on your system. * Additional libraries ---------------------- wxWidgets/X11 requires a thread library and X libraries known to work with threads. This is the case on all commercial Unix-Variants and all Linux-Versions that are based on glibc 2 except RedHat 5.0 which is broken in many aspects. As of writing this, virtually all Linux distributions have +correct glibc 2 support. You can disable thread support by running ./configure --disable-threads make su make install ldconfig exit * Building wxX11 on OS/2 ------------------------ Please send comments and question about the OS/2 installation to Stefan Neis and patches to the wxWidgets mailing list. In the following list, the version numbers indicate the configuration that was actually used by myself, newer version should cause no problems and even older ones are expected to work most of the time. You'll need OS/2 Warp (4.51) or eCS(1.0), X-Free86/2 (3.3.6 or newer), emx (0.9d fix 4), flex (2.5.4), yacc (1.8) or bison (1.25), a Unix like shell (pdksh-5.2.14 or ash), Autoconf (2.57), GNU file utilities (3.13), GNU text utilities (1.19), GNU shell utilites (1.12), m4 (1.4), sed (2.05), grep (2.0), Awk (3.0.3), GNU Make (3.75). Preferably, you should have Posix/2 installed and C(PLUS)_INCLUDE_PATH and LIBRARY_PATH set up accordingly, however, wxGTK will even work without it. Presence of Posix/2 will be auto-detected. Open an OS/2 prompt and switch to the directory above. Set MAKESHELL (and depending on your installation also INSTALL, for me it tends to try to use the system's tcpip\pcomos\install.exe which causes problems...) to a Unix like shell, e.g. SET MAKESHELL=ash Be warned that depending on the precise version of your make, the variable that needs to be set might be MAKE_SHELL instead of MAKESHELL. If you have a really deficient version of GNU make, it might even be necessary to set SHELL or even COMSPEC to a unix like shell as well. Notice that the delivered configure scripts are fully OS/2 aware, so you can simply run ash -c "configure --with-x11" and make and possibly make install as described above. To verify X11 installation, configure will try to compile a sample program that requires X headers/libraries to be either available via C_INCLUDE_PATH and LIBRARY_PATH or you need to explicitly set CFLAGS prior to running configure. * Building wxX11 on SGI ----------------------- Using the SGI native compilers, it is recommended that you also set CFLAGS and CXXFLAGS before running configure. These should be set to : CFLAGS="-mips3 -n32" CXXFLAGS="-mips3 -n32" This is essential if you want to use the resultant binaries on any other machine than the one it was compiled on. If you have a 64bit machine (Octane) you should also do this to ensure you don't accidently build the libraries as 64bit (which is untested). The SGI native compiler support has only been tested on Irix 6.5. * Building wxX11 on Cygwin -------------------------- The normal build instructions should work fine on Cygwin. The one difference with Cygwin is that when using the "--enable-shared" configure option (which is the default) the API is exported explicitly using __declspec(dllexport) rather than all global symbols being available. This shouldn't make a difference using the library and should be a little more efficient. However if an export attribute has been missed somewhere you will see linking errors. If this happens then you can work around the problem by setting LDFLAGS=-Wl,--export-all-symbols. Please also let us know about it on the wx-dev mailing list. * Create your configuration --------------------------- Usage: ./configure [options] If you want to use system's C and C++ compiler, set environment variables CXX and CC as % setenv CC cc % setenv CXX CC % ./configure [options] to see all the options please use: ./configure --help The basic philosophy is that if you want to use different configurations, like a debug and a release version, or use the same source tree on different systems, you have only to change the environment variable OSTYPE. (Sadly this variable is not set by default on some systems in some shells - on SGI's for example). So you will have to set it there. This variable HAS to be set before starting configure, so that it knows which system it tries to configure for. Configure will complain if the system variable OSTYPE has not been defined. And Make in some circumstances as well... * General options ----------------- Given below are the commands to change the default behaviour, i.e. if it says "--disable-threads" it means that threads are enabled by default. You have to add --with-x11 on platforms, where X11 is not the default (on Linux, configure will default to GTK). --with-x11 Use X11. The following options handle the kind of library you want to build. --disable-threads Compile without thread support. Threads support is also required for the socket code to work. --disable-shared Do not create shared libraries. --enable-monolithic Build wxWidgets as single library instead of as several smaller libraries (which is the default since wxWidgets 2.5.0). --disable-optimise Do not optimise the code. Can sometimes be useful for debugging and is required on some architectures such as Sun with gcc 2.8.X which would otherwise produce segvs. --enable-profile Add profiling info to the object files. Currently broken, I think. --enable-no_rtti Enable compilation without creation of C++ RTTI information in object files. This will speed-up compilation and reduce binary size. --enable-no_exceptions Enable compilation without creation of C++ exception information in object files. This will speed-up compilation and reduce binary size. Also fewer crashes during the actual compilation... --enable-no_deps Enable compilation without creation of dependency information. --enable-permissive Enable compilation without checking for strict ANSI conformance. Useful to prevent the build dying with errors as soon as you compile with Solaris' ANSI-defying headers. --enable-mem_tracing Add built-in memory tracing. --enable-dmalloc Use the dmalloc memory debugger. Read more at www.letters.com/dmalloc/ --enable-debug_info Add debug info to object files and executables for use with debuggers such as gdb (or its many frontends). --enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when compiling. This enable wxWidgets' very useful internal debugging tricks (such as automatically reporting illegal calls) to work. Note that program and library must be compiled with the same debug options. * Feature Options ----------------- Many of the configure options have been thoroughly tested in wxWidgets snapshot 6, but not yet all (ODBC not). When producing an executable that is linked statically with wxX11 you'll be surprised at its immense size. This can sometimes be drastically reduced by removing features from wxWidgets that are not used in your program. The most relevant such features are --without-libpng Disables PNG image format code. --without-libjpeg Disables JPEG image format code. { --without-odbc Disables ODBC code. Not yet. } --without-expat Disable XML classes based on Expat parser. --disable-resources Disables the use of *.wxr type resources. --disable-threads Disables threads. Will also disable sockets. --disable-sockets Disables sockets. --disable-dnd Disables Drag'n'Drop. --disable-clipboard Disables Clipboard. --disable-serial Disables object instance serialisation. --disable-streams Disables the wxStream classes. --disable-file Disables the wxFile class. --disable-textfile Disables the wxTextFile class. --disable-intl Disables the internationalisation. --disable-validators Disables validators. --disable-accel Disables accel. Apart from disabling certain features you can very often "strip" the program of its debugging information resulting in a significant reduction in size. Please see the output of "./configure --help" for comprehensive list of all configurable options. * Compiling ----------- The following must be done in the base directory (e.g. ~/wxX11 or whatever) Now the makefiles are created (by configure) and you can compile the library by typing: make make yourself some coffee, as it will take some time. On an old 386SX possibly two weeks. During compilation, you'll get a few warning messages depending in your compiler. If you want to be more selective, you can change into a specific directory and type "make" there. Then you may install the library and its header files under /usr/local/include/wx and /usr/local/lib respectively. You have to log in as root (i.e. run "su" and enter the root password) and type make install You can remove any traces of wxWidgets by typing make uninstall If you want to save disk space by removing unnecessary object-files: make clean in the various directories will do the work for you. * Creating a new Project ------------------------ 1) The first way uses the installed libraries and header files automatically using wx-config g++ myfoo.cpp `wx-config --libs` `wx-config --cxxflags` -o myfoo Using this way, a make file for the minimal sample would look like this CXX = g++ minimal: minimal.o $(CXX) -o minimal minimal.o `wx-config --libs` minimal.o: minimal.cpp $(CXX) `wx-config --cxxflags` -c minimal.cpp -o minimal.o clean: rm -f *.o minimal This is certain to become the standard way unless we decide to stick to tmake. If your application uses only some of wxWidgets libraries, you can specify required libraries when running wx-config. For example, `wx-config --libs=html,core` will only output link command to link with libraries required by core GUI classes and wxHTML classes. See the manual for more information on the libraries. 2) The other way creates a project within the source code directories of wxWidgets. For this endeavour, you'll need GNU autoconf version 2.14 and add an entry to your Makefile.in to the bottom of the configure.in script and run autoconf and configure before you can type make. * Further notes by Julian Smart ------------------------------- - You may find the following script useful for compiling wxX11, especially if installing from zips (which don't preserve file permissions). Make this script executable with the command chmod a+x makewxx11. -------:x-----Cut here-----:x----- # makewxx11 # Sets permissions (in case we extracted wxX11 from zip files) # and makes wxX11. # Call from top-level wxWidgets directory. # Note that this uses standard (but commonly-used) configure options; # if you're feeling brave, you may wish to compile with threads: # if they're not supported by the target platform, they will be disabled # anyhow # -- Julian Smart chmod a+x configure config.sub config.guess ./configure --with-x11 --with-shared --with-debug_flag --with-debug_info --enable-debug --without-threads --without-sockets --without-odbc make -------:x-----Cut here-----:x----- This script will build wxX11 using shared libraries. If you want to build a static wxWidgets library, use --disable-shared. Troubleshooting --------------- - Solaris compilation with gcc: if the compiler has problems with the variable argument functions, try putting the gcc fixinclude file paths early in the include path. - If you operator-related compile errors or strange memory problems (for example in deletion of string arrays), set wxUSE_GLOBAL_MEMORY_OPERATORS and wxUSE_MEMORY_TRACING to 0 in setup.h, and recompile. - If you get an internal compiler error in gcc, turn off optimisations. - Some compilers, such as Sun C++, may give a lot of warnings about virtual functions being hidden. Please ignore these, it's correct C++ syntax. If you find any incorrect instances, though, such as a missing 'const' in an overridden function, please let us know. Other Notes ----------- - Debugging mode is switched on by default in the makefiles, but using configure will create a release build of the library by default: it's recommended to use --with-debug_info and --with-debug_flag configure switches while developing your application. To compile in non-debug mode, remove the -D__WXDEBUG__ switch in make.env (or if using the configure system, change --with-debug_flag to --without-debug_flag and --with-debug_info to --without-debug_info in the makewxx11 script). Bug reports ----------- Please send bug reports with a description of your environment, compiler and the error message(s) to the developers mailing list at: https://www.wxwidgets.org/support/mailing-lists/