///////////////////////////////////////////////////////////////////////////// // Name: dataview.h // Purpose: interface of wxDataView* classes // Author: wxWidgets team // RCS-ID: $Id$ // Licence: wxWindows license ///////////////////////////////////////////////////////////////////////////// /** @class wxDataViewModel wxDataViewModel is the base class for all data model to be displayed by a wxDataViewCtrl. All other models derive from it and must implement its pure virtual functions in order to define a complete data model. In detail, you need to override wxDataViewModel::IsContainer, wxDataViewModel::GetParent, wxDataViewModel::GetChildren, wxDataViewModel::GetColumnCount, wxDataViewModel::GetColumnType and wxDataViewModel::GetValue in order to define the data model which acts as an interface between your actual data and the wxDataViewCtrl. Since you will usually also allow the wxDataViewCtrl to change your data through its graphical interface, you will also have to override wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change to some data has been committed. wxDataViewModel (as indeed the entire wxDataViewCtrl code) is using wxVariant to store data and its type in a generic way. wxVariant can be extended to contain almost any data without changes to the original class. The data that is presented through this data model is expected to change at run-time. You need to inform the data model when a change happened. Depending on what happened you need to call one of the following methods: - wxDataViewModel::ValueChanged, - wxDataViewModel::ItemAdded, - wxDataViewModel::ItemDeleted, - wxDataViewModel::ItemChanged, - wxDataViewModel::Cleared. There are plural forms for notification of addition, change or removal of several item at once. See: - wxDataViewModel::ItemsAdded, - wxDataViewModel::ItemsDeleted, - wxDataViewModel::ItemsChanged. Note that wxDataViewModel does not define the position or index of any item in the control because different controls might display the same data differently. wxDataViewModel does provide a wxDataViewModel::Compare method which the wxDataViewCtrl may use to sort the data either in conjunction with a column header or without (see wxDataViewModel::HasDefaultCompare). This class maintains a list of wxDataViewModelNotifier which link this class to the specific implementations on the supported platforms so that e.g. calling wxDataViewModel::ValueChanged on this model will just call wxDataViewModelNotifier::ValueChanged for each notifier that has been added. You can also add your own notifier in order to get informed about any changes to the data in the list model. Currently wxWidgets provides the following models apart from the base model: wxDataViewIndexListModel, wxDataViewVirtualListModel, wxDataViewTreeStore, wxDataViewListStore. Note that wxDataViewModel is reference counted, derives from wxRefCounter and cannot be deleted directly as it can be shared by several wxDataViewCtrls. This implies that you need to decrease the reference count after associating the model with a control like this: @code wxDataViewCtrl *musicCtrl = new wxDataViewCtrl( this, wxID_ANY ); wxDataViewModel *musicModel = new MyMusicModel; m_musicCtrl->AssociateModel( musicModel ); musicModel->DecRef(); // avoid memory leak !! // add columns now @endcode @library{wxadv} @category{dvc} */ class wxDataViewModel : public wxRefCounter { public: /** Constructor. */ wxDataViewModel(); /** Adds a wxDataViewModelNotifier to the model. */ void AddNotifier(wxDataViewModelNotifier* notifier); /** Change the value of the given item and update the control to reflect it. This function simply calls SetValue() and, if it succeeded, ValueChanged(). @since 2.9.1 @param variant The new value. @param item The item (row) to update. @param col The column to update. @return @true if both SetValue() and ValueChanged() returned @true. */ bool ChangeValue(const wxVariant& variant, const wxDataViewItem& item, unsigned int col); /** Called to inform the model that all data has been cleared. The control will reread the data from the model again. */ virtual bool Cleared(); /** The compare function to be used by control. The default compare function sorts by container and other items separately and in ascending order. Override this for a different sorting behaviour. @see HasDefaultCompare(). */ virtual int Compare(const wxDataViewItem& item1, const wxDataViewItem& item2, unsigned int column, bool ascending) const; /** Override this to indicate that the item has special font attributes. This only affects the wxDataViewTextRendererText renderer. The base class version always simply returns @false. @see wxDataViewItemAttr. @param item The item for which the attribute is requested. @param col The column of the item for which the attribute is requested. @param attr The attribute to be filled in if the function returns @true. @return @true if this item has an attribute or @false otherwise. */ virtual bool GetAttr(const wxDataViewItem& item, unsigned int col, wxDataViewItemAttr& attr) const; /** Override this so the control can query the child items of an item. Returns the number of items. */ virtual unsigned int GetChildren(const wxDataViewItem& item, wxDataViewItemArray& children) const = 0; /** Override this to indicate the number of columns in the model. */ virtual unsigned int GetColumnCount() const = 0; /** Override this to indicate what type of data is stored in the column specified by @a col. This should return a string indicating the type of data as reported by wxVariant. */ virtual wxString GetColumnType(unsigned int col) const = 0; /** Override this to indicate which wxDataViewItem representing the parent of @a item or an invalid wxDataViewItem if the the root item is the parent item. */ virtual wxDataViewItem GetParent(const wxDataViewItem& item) const = 0; /** Override this to indicate the value of @a item. A wxVariant is used to store the data. */ virtual void GetValue(wxVariant& variant, const wxDataViewItem& item, unsigned int col) const = 0; /** Override this method to indicate if a container item merely acts as a headline (or for categorisation) or if it also acts a normal item with entries for futher columns. By default returns @false. */ virtual bool HasContainerColumns(const wxDataViewItem& item) const; /** Override this to indicate that the model provides a default compare function that the control should use if no wxDataViewColumn has been chosen for sorting. Usually, the user clicks on a column header for sorting, the data will be sorted alphanumerically. If any other order (e.g. by index or order of appearance) is required, then this should be used. See wxDataViewIndexListModel for a model which makes use of this. */ virtual bool HasDefaultCompare() const; /** Return true if there is a value in the given column of this item. All normal items have values in all columns but the container items only show their label in the first column (@a col == 0) by default (but see HasContainerColumns()). So this function always returns true for the first column while for the other ones it returns true only if the item is not a container or HasContainerColumns() was overridden to return true for it. @since 2.9.1 */ bool HasValue(const wxDataViewItem& item, unsigned col) const; /** Override this to indicate of @a item is a container, i.e. if it can have child items. */ virtual bool IsContainer(const wxDataViewItem& item) const = 0; /** Call this to inform the model that an item has been added to the data. */ virtual bool ItemAdded(const wxDataViewItem& parent, const wxDataViewItem& item); /** Call this to inform the model that an item has changed. This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED event (in which the column fields will not be set) to the user. */ virtual bool ItemChanged(const wxDataViewItem& item); /** Call this to inform the model that an item has been deleted from the data. */ virtual bool ItemDeleted(const wxDataViewItem& parent, const wxDataViewItem& item); /** Call this to inform the model that several items have been added to the data. */ virtual bool ItemsAdded(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** Call this to inform the model that several items have changed. This will eventually emit wxEVT_DATAVIEW_ITEM_VALUE_CHANGED events (in which the column fields will not be set) to the user. */ virtual bool ItemsChanged(const wxDataViewItemArray& items); /** Call this to inform the model that several items have been deleted. */ virtual bool ItemsDeleted(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** Remove the @a notifier from the list of notifiers. */ void RemoveNotifier(wxDataViewModelNotifier* notifier); /** Call this to initiate a resort after the sort function has been changed. */ virtual void Resort(); /** This gets called in order to set a value in the data model. The most common scenario is that the wxDataViewCtrl calls this method after the user changed some data in the view. This is the function you need to override in your derived class but if you want to call it, ChangeValue() is usually more convenient as otherwise you need to manually call ValueChanged() to update the control itself. */ virtual bool SetValue(const wxVariant& variant, const wxDataViewItem& item, unsigned int col) = 0; /** Call this to inform this model that a value in the model has been changed. This is also called from wxDataViewCtrl's internal editing code, e.g. when editing a text field in the control. This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED event to the user. */ virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col); protected: /** Destructor. This should not be called directly. Use DecRef() instead. */ virtual ~wxDataViewModel(); }; /** @class wxDataViewIndexListModel wxDataViewIndexListModel is a specialized data model which lets you address an item by its position (row) rather than its wxDataViewItem (which you can obtain from this class). This model also provides its own wxDataViewIndexListModel::Compare method which sorts the model's data by the index. This model is not a virtual model since the control stores each wxDataViewItem. Use wxDataViewVirtualListModel if you need to display millions of items or have other reason to use a virtual control. @library{wxadv} @category{dvc} */ class wxDataViewIndexListModel : public wxDataViewModel { public: /** Constructor. */ wxDataViewIndexListModel(unsigned int initial_size = 0); /** Destructor. */ virtual ~wxDataViewIndexListModel(); /** Compare method that sorts the items by their index. */ int Compare(const wxDataViewItem& item1, const wxDataViewItem& item2, unsigned int column, bool ascending); /** Override this to indicate that the row has special font attributes. This only affects the wxDataViewTextRendererText() renderer. The base class version always simply returns @false. @see wxDataViewItemAttr. @param row The row for which the attribute is requested. @param col The column for which the attribute is requested. @param attr The attribute to be filled in if the function returns @true. @return @true if this item has an attribute or @false otherwise. */ virtual bool GetAttrByRow(unsigned int row, unsigned int col, wxDataViewItemAttr& attr) const; /** Returns the number of items (i.e. rows) in the list. */ unsigned int GetCount() const; /** Returns the wxDataViewItem at the given @e row. */ wxDataViewItem GetItem(unsigned int row) const; /** Returns the position of given @e item. */ unsigned int GetRow(const wxDataViewItem& item) const; /** Override this to allow getting values from the model. */ virtual void GetValueByRow(wxVariant& variant, unsigned int row, unsigned int col) const = 0; /** Call this after if the data has to be read again from the model. This is useful after major changes when calling the methods below (possibly thousands of times) doesn't make sense. */ void Reset(unsigned int new_size); /** Call this after a row has been appended to the model. */ void RowAppended(); /** Call this after a row has been changed. */ void RowChanged(unsigned int row); /** Call this after a row has been deleted. */ void RowDeleted(unsigned int row); /** Call this after a row has been inserted at the given position. */ void RowInserted(unsigned int before); /** Call this after a row has been prepended to the model. */ void RowPrepended(); /** Call this after a value has been changed. */ void RowValueChanged(unsigned int row, unsigned int col); /** Call this after rows have been deleted. The array will internally get copied and sorted in descending order so that the rows with the highest position will be deleted first. */ void RowsDeleted(const wxArrayInt& rows); /** Called in order to set a value in the model. */ virtual bool SetValueByRow(const wxVariant& variant, unsigned int row, unsigned int col) = 0; }; /** @class wxDataViewVirtualListModel wxDataViewVirtualListModel is a specialized data model which lets you address an item by its position (row) rather than its wxDataViewItem and as such offers the exact same interface as wxDataViewIndexListModel. The important difference is that under platforms other than OS X, using this model will result in a truly virtual control able to handle millions of items as the control doesn't store any item (a feature not supported by the Carbon API under OS X). @see wxDataViewIndexListModel for the API. @library{wxadv} @category{dvc} */ class wxDataViewVirtualListModel : public wxDataViewModel { public: /** Constructor. */ wxDataViewVirtualListModel(unsigned int initial_size = 0); /** Returns the number of virtual items (i.e. rows) in the list. */ unsigned int GetCount() const; }; /** @class wxDataViewItemAttr This class is used to indicate to a wxDataViewCtrl that a certain item (see wxDataViewItem) has extra font attributes for its renderer. For this, it is required to override wxDataViewModel::GetAttr. Attributes are currently only supported by wxDataViewTextRendererText. @library{wxadv} @category{dvc} */ class wxDataViewItemAttr { public: /** Constructor. */ wxDataViewItemAttr(); /** Call this to indicate that the item shall be displayed in bold text. */ void SetBold(bool set); /** Call this to indicate that the item shall be displayed with that colour. */ void SetColour(const wxColour& colour); /** Call this to indicate that the item shall be displayed in italic text. */ void SetItalic(bool set); }; /** @class wxDataViewItem wxDataViewItem is a small opaque class that represents an item in a wxDataViewCtrl in a persistent way, i.e. independent of the position of the item in the control or changes to its contents. It must hold a unique ID of type @e void* in its only field and can be converted to and from it. If the ID is @NULL the wxDataViewItem is invalid and wxDataViewItem::IsOk will return @false which used in many places in the API of wxDataViewCtrl to indicate that e.g. no item was found. An ID of @NULL is also used to indicate the invisible root. Examples for this are wxDataViewModel::GetParent and wxDataViewModel::GetChildren. @library{wxadv} @category{dvc} */ class wxDataViewItem { public: //@{ /** Constructor. */ wxDataViewItem(void* id = NULL); wxDataViewItem(const wxDataViewItem& item); //@} /** Returns the ID. */ void* GetID() const; /** Returns @true if the ID is not @NULL. */ bool IsOk() const; }; /** @class wxDataViewCtrl wxDataViewCtrl is a control to display data either in a tree like fashion or in a tabular form or both. If you only need to display a simple tree structure with an API more like the older wxTreeCtrl class, then the specialized wxDataViewTreeCtrl can be used. Likewise, if you only want to display simple table structure you can use the specialized wxDataViewListCtrl class. Both wxDataViewTreeCtrl and wxDataViewListCtrl can be used without defining your own wxDataViewModel. A wxDataViewItem is used to represent a (visible) item in the control. Unlike wxListCtrl, wxDataViewCtrl doesn't get its data from the user through virtual functions or by setting it directly. Instead you need to write your own wxDataViewModel and associate it with this control. Then you need to add a number of wxDataViewColumn to this control to define what each column shall display. Each wxDataViewColumn in turn owns 1 instance of a wxDataViewRenderer to render its cells. A number of standard renderers for rendering text, dates, images, toggle, a progress bar etc. are provided. Additionally, the user can write custom renderers deriving from wxDataViewCustomRenderer for displaying anything. All data transfer from the control to the model and the user code is done through wxVariant which can be extended to support more data formats as necessary. Accordingly, all type information uses the strings returned from wxVariant::GetType. @beginStyleTable @style{wxDV_SINGLE} Single selection mode. This is the default. @style{wxDV_MULTIPLE} Multiple selection mode. @style{wxDV_ROW_LINES} Use alternating colours for rows if supported by platform and theme. @style{wxDV_HORIZ_RULES} Display fine rules between row if supported. @style{wxDV_VERT_RULES} Display fine rules between columns is supported. @style{wxDV_VARIABLE_LINE_HEIGHT} Allow variable line heights. This can be inefficient when displaying large number of items. @style{wxDV_NO_HEADER} Do not show column headers (which are shown by default). @endStyleTable @beginEventEmissionTable{wxDataViewEvent} @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED event. @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. @event{EVT_DATAVIEW_ITEM_START_EDITING(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. This event can be vetoed in order to prevent editing on an item by item basis. Still experimental. @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event. @event{EVT_DATAVIEW_ITEM_COLLAPSING(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING event. @event{EVT_DATAVIEW_ITEM_COLLAPSED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED event. @event{EVT_DATAVIEW_ITEM_EXPANDING(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING event. @event{EVT_DATAVIEW_ITEM_EXPANDED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED event. @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event. @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event. @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event. @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event. @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED event. @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED event. @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG event. @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE event. @event{EVT_DATAVIEW_ITEM_DROP(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event. @endEventTable @library{wxadv} @category{ctrl,dvc} @appearance{dataviewctrl.png} */ class wxDataViewCtrl : public wxControl { public: /** Default Constructor. */ wxDataViewCtrl(); /** Constructor. Calls Create(). */ wxDataViewCtrl(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = 0, const wxValidator& validator = wxDefaultValidator); /** Destructor. */ virtual ~wxDataViewCtrl(); /** Appends a wxDataViewColumn to the control. Returns @true on success. Note that there is a number of short cut methods which implicitly create a wxDataViewColumn and a wxDataViewRenderer for it (see below). */ virtual bool AppendColumn(wxDataViewColumn* col); /** Prepends a wxDataViewColumn to the control. Returns @true on success. Note that there is a number of short cut methods which implicitly create a wxDataViewColumn and a wxDataViewRenderer for it. */ virtual bool PrependColumn(wxDataViewColumn* col); /** Inserts a wxDataViewColumn to the control. Returns @true on success. */ virtual bool InsertColumn(unsigned int pos, wxDataViewColumn* col); //@{ /** Appends a column for rendering a bitmap. Returns the wxDataViewColumn created in the function or @NULL on failure. */ wxDataViewColumn* AppendBitmapColumn(const wxString& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); wxDataViewColumn* AppendBitmapColumn(const wxBitmap& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); //@} //@{ /** Appends a column for rendering a date. Returns the wxDataViewColumn created in the function or @NULL on failure. @note The @a align parameter is applied to both the column header and the column renderer. */ wxDataViewColumn* AppendDateColumn(const wxString& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE, int width = -1, wxAlignment align = wxALIGN_NOT, int flags = wxDATAVIEW_COL_RESIZABLE); wxDataViewColumn* AppendDateColumn(const wxBitmap& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE, int width = -1, wxAlignment align = wxALIGN_NOT, int flags = wxDATAVIEW_COL_RESIZABLE); //@} //@{ /** Appends a column for rendering text with an icon. Returns the wxDataViewColumn created in the function or @NULL on failure. This method uses the wxDataViewIconTextRenderer class. @note The @a align parameter is applied to both the column header and the column renderer. */ wxDataViewColumn* AppendIconTextColumn(const wxString& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_NOT, int flags = wxDATAVIEW_COL_RESIZABLE); wxDataViewColumn* AppendIconTextColumn(const wxBitmap& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_NOT, int flags = wxDATAVIEW_COL_RESIZABLE); //@} //@{ /** Appends a column for rendering a progress indicator. Returns the wxDataViewColumn created in the function or @NULL on failure. @note The @a align parameter is applied to both the column header and the column renderer. */ wxDataViewColumn* AppendProgressColumn(const wxString& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = 80, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); wxDataViewColumn* AppendProgressColumn(const wxBitmap& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = 80, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); //@} //@{ /** Appends a column for rendering text. Returns the wxDataViewColumn created in the function or @NULL on failure. @note The @a align parameter is applied to both the column header and the column renderer. */ wxDataViewColumn* AppendTextColumn(const wxString& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_NOT, int flags = wxDATAVIEW_COL_RESIZABLE); wxDataViewColumn* AppendTextColumn(const wxBitmap& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_NOT, int flags = wxDATAVIEW_COL_RESIZABLE); //@} //@{ /** Appends a column for rendering a toggle. Returns the wxDataViewColumn created in the function or @NULL on failure. @note The @a align parameter is applied to both the column header and the column renderer. */ wxDataViewColumn* AppendToggleColumn(const wxString& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = 30, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); wxDataViewColumn* AppendToggleColumn(const wxBitmap& label, unsigned int model_column, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = 30, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); //@} /** Associates a wxDataViewModel with the control. This increases the reference count of the model by 1. */ virtual bool AssociateModel(wxDataViewModel* model); /** Removes all columns. */ virtual bool ClearColumns(); /** Collapses the item. */ virtual void Collapse(const wxDataViewItem& item); /** Create the control. Useful for two step creation. */ bool Create(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = 0, const wxValidator& validator = wxDefaultValidator); /** Deletes given column. */ virtual bool DeleteColumn(wxDataViewColumn* column); /** Enable drag operations using the given @a format. */ virtual bool EnableDragSource( const wxDataFormat &format ); /** Enable drop operations using the given @a format. */ virtual bool EnableDropTarget( const wxDataFormat &format ); /** Call this to ensure that the given item is visible. */ virtual void EnsureVisible(const wxDataViewItem& item, const wxDataViewColumn* column = NULL); /** Expands the item. */ virtual void Expand(const wxDataViewItem& item); /** Expands all ancestors of the @a item. This method also ensures that the item itself as well as all ancestor items have been read from the model by the control. */ virtual void ExpandAncestors( const wxDataViewItem & item ); /** Returns pointer to the column. @a pos refers to the position in the control which may change after reordering columns by the user. */ virtual wxDataViewColumn* GetColumn(unsigned int pos) const; /** Returns the number of columns. */ virtual unsigned int GetColumnCount() const; /** Returns the position of the column or -1 if not found in the control. */ virtual int GetColumnPosition(const wxDataViewColumn* column) const; /** Returns column containing the expanders. */ wxDataViewColumn* GetExpanderColumn() const; /** Returns indentation. */ int GetIndent() const; /** Returns item rect. */ virtual wxRect GetItemRect(const wxDataViewItem& item, const wxDataViewColumn* col = NULL) const; /** Returns pointer to the data model associated with the control (if any). */ wxDataViewModel* GetModel(); /** Returns first selected item or an invalid item if none is selected. */ virtual wxDataViewItem GetSelection() const; /** Fills @a sel with currently selected items and returns their number. */ virtual int GetSelections(wxDataViewItemArray& sel) const; /** Returns the wxDataViewColumn currently responsible for sorting or @NULL if none has been selected. */ virtual wxDataViewColumn* GetSortingColumn() const; /** Hittest. */ virtual void HitTest(const wxPoint& point, wxDataViewItem& item, wxDataViewColumn*& col) const; /** Return @true if the item is expanded. */ virtual bool IsExpanded(const wxDataViewItem& item) const; /** Return @true if the item is selected. */ virtual bool IsSelected(const wxDataViewItem& item) const; /** Select the given item. */ virtual void Select(const wxDataViewItem& item); /** Select all items. */ virtual void SelectAll(); /** Set which column shall contain the tree-like expanders. */ void SetExpanderColumn(wxDataViewColumn* col); /** Sets the indendation. */ void SetIndent(int indent); /** Sets the selection to the array of wxDataViewItems. */ virtual void SetSelections(const wxDataViewItemArray& sel); /** Unselect the given item. */ virtual void Unselect(const wxDataViewItem& item); /** Unselect all item. This method only has effect if multiple selections are allowed. */ virtual void UnselectAll(); }; /** @class wxDataViewModelNotifier A wxDataViewModelNotifier instance is owned by a wxDataViewModel and mirrors its notification interface. See the documentation of that class for further information. @library{wxadv} @category{dvc} */ class wxDataViewModelNotifier { public: /** Constructor. */ wxDataViewModelNotifier(); /** Destructor. */ virtual ~wxDataViewModelNotifier(); /** Called by owning model. */ virtual bool Cleared() = 0; /** Get owning wxDataViewModel. */ wxDataViewModel* GetOwner() const; /** Called by owning model. */ virtual bool ItemAdded(const wxDataViewItem& parent, const wxDataViewItem& item) = 0; /** Called by owning model. */ virtual bool ItemChanged(const wxDataViewItem& item) = 0; /** Called by owning model. */ virtual bool ItemDeleted(const wxDataViewItem& parent, const wxDataViewItem& item) = 0; /** Called by owning model. */ virtual bool ItemsAdded(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** Called by owning model. */ virtual bool ItemsChanged(const wxDataViewItemArray& items); /** Called by owning model. */ virtual bool ItemsDeleted(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** Called by owning model. */ virtual void Resort() = 0; /** Set owner of this notifier. Used internally. */ void SetOwner(wxDataViewModel* owner); /** Called by owning model. */ virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col) = 0; }; /** The mode of a data-view cell; see wxDataViewRenderer for more info. */ enum wxDataViewCellMode { wxDATAVIEW_CELL_INERT, /** Indicates that the user can double click the cell and something will happen (e.g. a window for editing a date will pop up). */ wxDATAVIEW_CELL_ACTIVATABLE, /** Indicates that the user can edit the data in-place, i.e. an control will show up after a slow click on the cell. This behaviour is best known from changing the filename in most file managers etc. */ wxDATAVIEW_CELL_EDITABLE }; /** The values of this enum controls how a wxDataViewRenderer should display its contents in a cell. */ enum wxDataViewCellRenderState { wxDATAVIEW_CELL_SELECTED = 1, wxDATAVIEW_CELL_PRELIT = 2, wxDATAVIEW_CELL_INSENSITIVE = 4, wxDATAVIEW_CELL_FOCUSED = 8 }; /** @class wxDataViewRenderer This class is used by wxDataViewCtrl to render the individual cells. One instance of a renderer class is owned by a wxDataViewColumn. There is a number of ready-to-use renderers provided: - wxDataViewTextRenderer, - wxDataViewIconTextRenderer, - wxDataViewToggleRenderer, - wxDataViewProgressRenderer, - wxDataViewBitmapRenderer, - wxDataViewDateRenderer, - wxDataViewSpinRenderer. - wxDataViewChoiceRenderer. Additionally, the user can write own renderers by deriving from wxDataViewCustomRenderer. The ::wxDataViewCellMode and ::wxDataViewCellRenderState flags accepted by the constructors respectively controls what actions the cell data allows and how the renderer should display its contents in a cell. @library{wxadv} @category{dvc} */ class wxDataViewRenderer : public wxObject { public: /** Constructor. */ wxDataViewRenderer(const wxString& varianttype, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = wxDVR_DEFAULT_ALIGNMENT ); /** Enable or disable replacing parts of the item text with ellipsis to make it fit the column width. This method only makes sense for the renderers working with text, such as wxDataViewTextRenderer or wxDataViewIconTextRenderer. By default wxELLIPSIZE_MIDDLE is used. @param mode Ellipsization mode, use wxELLIPSIZE_NONE to disable. @since 2.9.1 */ void EnableEllipsize(wxEllipsizeMode mode = wxELLIPSIZE_MIDDLE); /** Disable replacing parts of the item text with ellipsis. If ellipsizing is disabled, the string will be truncated if it doesn't fit. This is the same as @code EnableEllipsize(wxELLIPSIZE_NONE) @endcode. @since 2.9.1 */ void DisableEllipsize(); /** Returns the alignment. See SetAlignment() */ virtual int GetAlignment() const; /** Returns the ellipsize mode used by the renderer. If the return value is wxELLIPSIZE_NONE, the text is simply truncated if it doesn't fit. @see EnableEllipsize() */ wxEllipsizeMode GetEllipsizeMode() const; /** Returns the cell mode. */ virtual wxDataViewCellMode GetMode() const; /** Returns pointer to the owning wxDataViewColumn. */ wxDataViewColumn* GetOwner() const; /** This methods retrieves the value from the renderer in order to transfer the value back to the data model. Returns @false on failure. */ virtual bool GetValue(wxVariant& value) const = 0; /** Returns a string with the type of the wxVariant supported by this renderer. */ wxString GetVariantType() const; /** Sets the alignment of the renderer's content. The default value of @c wxDVR_DEFAULT_ALIGMENT indicates that the content should have the same alignment as the column header. The method is not implemented under OS X and the renderer always aligns its contents as the column header on that platform. The other platforms support both vertical and horizontal alignment. */ virtual void SetAlignment( int align ); /** Sets the owning wxDataViewColumn. This is usually called from within wxDataViewColumn. */ void SetOwner(wxDataViewColumn* owner); /** Set the value of the renderer (and thus its cell) to @a value. The internal code will then render this cell with this data. */ virtual bool SetValue(const wxVariant& value) = 0; /** Before data is committed to the data model, it is passed to this method where it can be checked for validity. This can also be used for checking a valid range or limiting the user input in a certain aspect (e.g. max number of characters or only alphanumeric input, ASCII only etc.). Return @false if the value is not valid. Please note that due to implementation limitations, this validation is done after the editing control already is destroyed and the editing process finished. */ virtual bool Validate(wxVariant& value); }; /** @class wxDataViewTextRenderer wxDataViewTextRenderer is used for rendering text. It supports in-place editing if desired. @library{wxadv} @category{dvc} */ class wxDataViewTextRenderer : public wxDataViewRenderer { public: /** The ctor. */ wxDataViewTextRenderer(const wxString& varianttype = "string", wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = wxDVR_DEFAULT_ALIGNMENT ); }; /** @class wxDataViewIconTextRenderer The wxDataViewIconTextRenderer class is used to display text with a small icon next to it as it is typically done in a file manager. This classes uses the wxDataViewIconText helper class to store its data. wxDataViewIconText can be converted to and from a wxVariant using the left shift operator. @library{wxadv} @category{dvc} */ class wxDataViewIconTextRenderer : public wxDataViewRenderer { public: /** The ctor. */ wxDataViewIconTextRenderer(const wxString& varianttype = "wxDataViewIconText", wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = wxDVR_DEFAULT_ALIGNMENT ); }; /** @class wxDataViewProgressRenderer This class is used by wxDataViewCtrl to render progress bars. @library{wxadv} @category{dvc} */ class wxDataViewProgressRenderer : public wxDataViewRenderer { public: /** The ctor. */ wxDataViewProgressRenderer(const wxString& label = wxEmptyString, const wxString& varianttype = "long", wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = wxDVR_DEFAULT_ALIGNMENT ); }; /** @class wxDataViewSpinRenderer This is a specialized renderer for rendering integer values. It supports modifying the values in-place by using a wxSpinCtrl. The renderer only support variants of type @e long. @library{wxadv} @category{dvc} */ class wxDataViewSpinRenderer : public wxDataViewCustomRenderer { public: /** Constructor. @a min and @a max indicate the minimum and maximum values for the wxSpinCtrl. */ wxDataViewSpinRenderer(int min, int max, wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE, int align = wxDVR_DEFAULT_ALIGNMENT); }; /** @class wxDataViewToggleRenderer This class is used by wxDataViewCtrl to render toggle controls. @library{wxadv} @category{dvc} */ class wxDataViewToggleRenderer : public wxDataViewRenderer { public: /** The ctor. */ wxDataViewToggleRenderer(const wxString& varianttype = "bool", wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = wxDVR_DEFAULT_ALIGNMENT); }; /** @class wxDataViewChoiceRenderer This class is used by wxDataViewCtrl to render choice controls. It stores a string so that SetValue() and GetValue() operate on a variant holding a string. @library{wxadv} @category{dvc} */ class wxDataViewChoiceRenderer: public wxDataViewRenderer { public: /** The ctor. */ wxDataViewChoiceRenderer( const wxArrayString &choices, wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE, int alignment = wxDVR_DEFAULT_ALIGNMENT ); /** Returns the choice referred to by index. */ wxString GetChoice(size_t index) const; /** Returns all choices. */ const wxArrayString& GetChoices() const; }; /** @class wxDataViewDateRenderer This class is used by wxDataViewCtrl to render calendar controls. @library{wxadv} @category{dvc} */ class wxDataViewDateRenderer : public wxDataViewRenderer { public: /** The ctor. */ wxDataViewDateRenderer(const wxString& varianttype = "datetime", wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE, int align = wxDVR_DEFAULT_ALIGNMENT); }; /** @class wxDataViewCustomRenderer You need to derive a new class from wxDataViewCustomRenderer in order to write a new renderer. You need to override at least wxDataViewRenderer::SetValue, wxDataViewRenderer::GetValue, wxDataViewCustomRenderer::GetSize and wxDataViewCustomRenderer::Render. If you want your renderer to support in-place editing then you also need to override wxDataViewCustomRenderer::HasEditorCtrl, wxDataViewCustomRenderer::CreateEditorCtrl and wxDataViewCustomRenderer::GetValueFromEditorCtrl. Note that a special event handler will be pushed onto that editor control which handles @e \ and focus out events in order to end the editing. @library{wxadv} @category{dvc} */ class wxDataViewCustomRenderer : public wxDataViewRenderer { public: /** Constructor. */ wxDataViewCustomRenderer(const wxString& varianttype = "string", wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = -1, bool no_init = false); /** Destructor. */ virtual ~wxDataViewCustomRenderer(); /** Override this to react to double clicks or ENTER. This method will only be called in wxDATAVIEW_CELL_ACTIVATABLE mode. */ virtual bool Activate( wxRect cell, wxDataViewModel* model, const wxDataViewItem & item, unsigned int col ); /** Override this to create the actual editor control once editing is about to start. @a parent is the parent of the editor control, @a labelRect indicates the position and size of the editor control and @a value is its initial value: @code { long l = value; return new wxSpinCtrl( parent, wxID_ANY, wxEmptyString, labelRect.GetTopLeft(), labelRect.GetSize(), 0, 0, 100, l ); } @endcode */ virtual wxControl* CreateEditorCtrl(wxWindow* parent, wxRect labelRect, const wxVariant& value); /** Return the attribute to be used for rendering. This function may be called from Render() implementation to use the attributes defined for the item if the renderer supports them. Notice that when Render() is called, the wxDC object passed to it is already set up to use the correct attributes (e.g. its font is set to bold or italic version if wxDataViewItemAttr::GetBold() or GetItalic() returns true) so it may not be necessary to call it explicitly if you only want to render text using the items attributes. @since 2.9.1 */ const wxDataViewItemAttr& GetAttr() const; /** Return size required to show content. */ virtual wxSize GetSize() const = 0; /** Override this so that the renderer can get the value from the editor control (pointed to by @a editor): @code { wxSpinCtrl *sc = (wxSpinCtrl*) editor; long l = sc->GetValue(); value = l; return true; } @endcode */ virtual bool GetValueFromEditorCtrl(wxControl* editor, wxVariant& value); /** Override this and make it return @true in order to indicate that this renderer supports in-place editing. */ virtual bool HasEditorCtrl() const; /** Override this to react to a left click. This method will only be called in @c wxDATAVIEW_CELL_ACTIVATABLE mode. */ virtual bool LeftClick( wxPoint cursor, wxRect cell, wxDataViewModel * model, const wxDataViewItem & item, unsigned int col ); /** Override this to render the cell. Before this is called, wxDataViewRenderer::SetValue was called so that this instance knows what to render. */ virtual bool Render(wxRect cell, wxDC* dc, int state) = 0; /** This method should be called from within Render() whenever you need to render simple text. This will ensure that the correct colour, font and vertical alignment will be chosen so the text will look the same as text drawn by native renderers. */ void RenderText(const wxString& text, int xoffset, wxRect cell, wxDC* dc, int state); /** Override this to start a drag operation. Not yet supported. */ virtual bool StartDrag(wxPoint cursor, wxRect cell, wxDataViewModel* model, const wxDataViewItem & item, unsigned int col); }; /** @class wxDataViewBitmapRenderer This class is used by wxDataViewCtrl to render bitmap controls. @library{wxadv} @category{dvc} */ class wxDataViewBitmapRenderer : public wxDataViewRenderer { public: /** The ctor. */ wxDataViewBitmapRenderer(const wxString& varianttype = "wxBitmap", wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int align = wxDVR_DEFAULT_ALIGNMENT); }; /** The flags used by wxDataViewColumn. Can be combined together. */ enum wxDataViewColumnFlags { wxDATAVIEW_COL_RESIZABLE = 1, wxDATAVIEW_COL_SORTABLE = 2, wxDATAVIEW_COL_REORDERABLE = 4, wxDATAVIEW_COL_HIDDEN = 8 }; /** @class wxDataViewColumn This class represents a column in a wxDataViewCtrl. One wxDataViewColumn is bound to one column in the data model to which the wxDataViewCtrl has been associated. An instance of wxDataViewRenderer is used by this class to render its data. @library{wxadv} @category{dvc} */ class wxDataViewColumn : public wxSettableHeaderColumn { public: /** Constructs a text column. @param title The title of the column. @param renderer The class which will render the contents of this column. @param model_column The index of the model's column which is associated with this object. @param width The width of the column. The @c wxDVC_DEFAULT_WIDTH value is the fixed default value. @param align The alignment of the column title. @param flags One or more flags of the ::wxDataViewColumnFlags enumeration. */ wxDataViewColumn(const wxString& title, wxDataViewRenderer* renderer, unsigned int model_column, int width = wxDVC_DEFAULT_WIDTH, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); /** Constructs a bitmap column. @param bitmap The bitmap of the column. @param renderer The class which will render the contents of this column. @param model_column The index of the model's column which is associated with this object. @param width The width of the column. The @c wxDVC_DEFAULT_WIDTH value is the fixed default value. @param align The alignment of the column title. @param flags One or more flags of the ::wxDataViewColumnFlags enumeration. */ wxDataViewColumn(const wxBitmap& bitmap, wxDataViewRenderer* renderer, unsigned int model_column, int width = wxDVC_DEFAULT_WIDTH, wxAlignment align = wxALIGN_CENTER, int flags = wxDATAVIEW_COL_RESIZABLE); /** Returns the index of the column of the model, which this wxDataViewColumn is displaying. */ unsigned int GetModelColumn() const; /** Returns the owning wxDataViewCtrl. */ wxDataViewCtrl* GetOwner() const; /** Returns the renderer of this wxDataViewColumn. @see wxDataViewRenderer. */ wxDataViewRenderer* GetRenderer() const; }; /** @class wxDataViewListCtrl This class is a wxDataViewCtrl which internally uses a wxDataViewListStore and forwards most of its API to that class. The purpose of this class is to offer a simple way to display and edit a small table of data without having to write your own wxDataViewModel. @code wxDataViewListCtrl *listctrl = new wxDataViewListCtrl( parent, wxID_ANY ); listctrl->AppendToggleColumn( "Toggle" ); listctrl->AppendTextColumn( "Text" ); wxVector data; data.push_back( wxVariant(true) ); data.push_back( wxVariant("row 1") ); listctrl->AppendItem( data ); data.clear(); data.push_back( wxVariant(false) ); data.push_back( wxVariant("row 3") ); listctrl->AppendItem( data ); @endcode @beginStyleTable See wxDataViewCtrl for the list of supported styles. @endStyleTable @beginEventEmissionTable See wxDataViewCtrl for the list of events emitted by this class. @endEventTable @library{wxadv} @category{ctrl,dvc} */ class wxDataViewListCtrl: public wxDataViewCtrl { public: /** Default ctor. */ wxDataViewListCtrl(); /** Constructor. Calls Create(). */ wxDataViewListCtrl( wxWindow *parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDV_ROW_LINES, const wxValidator& validator = wxDefaultValidator ); /** Destructor. Deletes the image list if any. */ ~wxDataViewListCtrl(); /** Creates the control and a wxDataViewListStore as its internal model. */ bool Create( wxWindow *parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDV_ROW_LINES, const wxValidator& validator = wxDefaultValidator ); //@{ /** Returns the store. */ wxDataViewListStore *GetStore(); const wxDataViewListStore *GetStore() const; //@} /** @name Column management functions */ //@{ /** Appends a column to the control and additionally appends a column to the store with the type string. */ virtual void AppendColumn( wxDataViewColumn *column ); /** Appends a column to the control and additionally appends a column to the list store with the type @a varianttype. */ void AppendColumn( wxDataViewColumn *column, const wxString &varianttype ); /** Appends a text column to the control and the store. See wxDataViewColumn::wxDataViewColumn for more info about the parameters. */ wxDataViewColumn *AppendTextColumn( const wxString &label, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_LEFT, int flags = wxDATAVIEW_COL_RESIZABLE ); /** Appends a toggle column to the control and the store. See wxDataViewColumn::wxDataViewColumn for more info about the parameters. */ wxDataViewColumn *AppendToggleColumn( const wxString &label, wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE, int width = -1, wxAlignment align = wxALIGN_LEFT, int flags = wxDATAVIEW_COL_RESIZABLE ); /** Appends a progress column to the control and the store. See wxDataViewColumn::wxDataViewColumn for more info about the parameters. */ wxDataViewColumn *AppendProgressColumn( const wxString &label, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_LEFT, int flags = wxDATAVIEW_COL_RESIZABLE ); /** Appends an icon-and-text column to the control and the store. See wxDataViewColumn::wxDataViewColumn for more info about the parameters. */ wxDataViewColumn *AppendIconTextColumn( const wxString &label, wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT, int width = -1, wxAlignment align = wxALIGN_LEFT, int flags = wxDATAVIEW_COL_RESIZABLE ); /** Inserts a column to the control and additionally inserts a column to the store with the type string. */ virtual void InsertColumn( unsigned int pos, wxDataViewColumn *column ); /** Inserts a column to the control and additionally inserts a column to the list store with the type @a varianttype. */ void InsertColumn( unsigned int pos, wxDataViewColumn *column, const wxString &varianttype ); /** Prepends a column to the control and additionally prepends a column to the store with the type string. */ virtual void PrependColumn( wxDataViewColumn *column ); /** Prepends a column to the control and additionally prepends a column to the list store with the type @a varianttype. */ void PrependColumn( wxDataViewColumn *column, const wxString &varianttype ); //@} /** @name Item management functions */ //@{ /** Appends an item (=row) to the control and store. */ void AppendItem( const wxVector &values, wxClientData *data = NULL ); /** Prepends an item (=row) to the control and store. */ void PrependItem( const wxVector &values, wxClientData *data = NULL ); /** Inserts an item (=row) to the control and store. */ void InsertItem( unsigned int row, const wxVector &values, wxClientData *data = NULL ); /** Delete the row at position @a row. */ void DeleteItem( unsigned row ); /** Delete all items (= all rows). */ void DeleteAllItems(); /** Sets the value in the store and update the control. */ void SetValue( const wxVariant &value, unsigned int row, unsigned int col ); /** Returns the value from the store. */ void GetValue( wxVariant &value, unsigned int row, unsigned int col ); /** Sets the value in the store and update the control. This method assumes that the a string is stored in respective column. */ void SetTextValue( const wxString &value, unsigned int row, unsigned int col ); /** Returns the value from the store. This method assumes that the a string is stored in respective column. */ wxString GetTextValue( unsigned int row, unsigned int col ) const; /** Sets the value in the store and update the control. This method assumes that the a boolean value is stored in respective column. */ void SetToggleValue( bool value, unsigned int row, unsigned int col ); /** Returns the value from the store. This method assumes that the a boolean value is stored in respective column. */ bool GetToggleValue( unsigned int row, unsigned int col ) const; //@} }; /** @class wxDataViewTreeCtrl This class is a wxDataViewCtrl which internally uses a wxDataViewTreeStore and forwards most of its API to that class. Additionally, it uses a wxImageList to store a list of icons. The main purpose of this class is to provide a simple upgrade path for code using wxTreeCtrl. @beginStyleTable See wxDataViewCtrl for the list of supported styles. @endStyleTable @beginEventEmissionTable See wxDataViewCtrl for the list of events emitted by this class. @endEventTable @library{wxadv} @category{ctrl,dvc} @appearance{dataviewtreectrl.png} */ class wxDataViewTreeCtrl : public wxDataViewCtrl { public: /** Default ctor. */ wxDataViewTreeCtrl(); /** Constructor. Calls Create(). */ wxDataViewTreeCtrl(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDV_NO_HEADER | wxDV_ROW_LINES, const wxValidator& validator = wxDefaultValidator); /** Destructor. Deletes the image list if any. */ virtual ~wxDataViewTreeCtrl(); /** Appends a container to the given @a parent. */ wxDataViewItem AppendContainer(const wxDataViewItem& parent, const wxString& text, int icon = -1, int expanded = -1, wxClientData* data = NULL); /** Appends an item to the given @a parent. */ wxDataViewItem AppendItem(const wxDataViewItem& parent, const wxString& text, int icon = -1, wxClientData* data = NULL); /** Creates the control and a wxDataViewTreeStore as its internal model. The default tree column created by this method is an editable column using wxDataViewIconTextRenderer as its renderer. */ bool Create(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDV_NO_HEADER | wxDV_ROW_LINES, const wxValidator& validator = wxDefaultValidator); /** Calls the identical method from wxDataViewTreeStore. */ void DeleteAllItems(); /** Calls the identical method from wxDataViewTreeStore. */ void DeleteChildren(const wxDataViewItem& item); /** Calls the identical method from wxDataViewTreeStore. */ void DeleteItem(const wxDataViewItem& item); /** Calls the identical method from wxDataViewTreeStore. */ int GetChildCount(const wxDataViewItem& parent) const; /** Returns the image list. */ wxImageList* GetImageList(); /** Calls the identical method from wxDataViewTreeStore. */ wxClientData* GetItemData(const wxDataViewItem& item) const; /** Calls the identical method from wxDataViewTreeStore. */ const wxIcon& GetItemExpandedIcon(const wxDataViewItem& item) const; /** Calls the identical method from wxDataViewTreeStore. */ const wxIcon& GetItemIcon(const wxDataViewItem& item) const; /** Calls the identical method from wxDataViewTreeStore. */ wxString GetItemText(const wxDataViewItem& item) const; /** Calls the identical method from wxDataViewTreeStore. */ wxDataViewItem GetNthChild(const wxDataViewItem& parent, unsigned int pos) const; //@{ /** Returns the store. */ wxDataViewTreeStore* GetStore(); const wxDataViewTreeStore* GetStore() const; //@} /** Calls the same method from wxDataViewTreeStore but uses an index position in the image list instead of a wxIcon. */ wxDataViewItem InsertContainer(const wxDataViewItem& parent, const wxDataViewItem& previous, const wxString& text, int icon = -1, int expanded = -1, wxClientData* data = NULL); /** Calls the same method from wxDataViewTreeStore but uses an index position in the image list instead of a wxIcon. */ wxDataViewItem InsertItem(const wxDataViewItem& parent, const wxDataViewItem& previous, const wxString& text, int icon = -1, wxClientData* data = NULL); /** Returns true if item is a container. */ bool IsContainer( const wxDataViewItem& item ); /** Calls the same method from wxDataViewTreeStore but uses an index position in the image list instead of a wxIcon. */ wxDataViewItem PrependContainer(const wxDataViewItem& parent, const wxString& text, int icon = -1, int expanded = -1, wxClientData* data = NULL); /** Calls the same method from wxDataViewTreeStore but uses an index position in the image list instead of a wxIcon. */ wxDataViewItem PrependItem(const wxDataViewItem& parent, const wxString& text, int icon = -1, wxClientData* data = NULL); /** Sets the image list. */ void SetImageList(wxImageList* imagelist); /** Calls the identical method from wxDataViewTreeStore. */ void SetItemData(const wxDataViewItem& item, wxClientData* data); /** Calls the identical method from wxDataViewTreeStore. */ void SetItemExpandedIcon(const wxDataViewItem& item, const wxIcon& icon); /** Calls the identical method from wxDataViewTreeStore. */ void SetItemIcon(const wxDataViewItem& item, const wxIcon& icon); /** Calls the identical method from wxDataViewTreeStore. */ void SetItemText(const wxDataViewItem& item, const wxString& text); }; /** @class wxDataViewListStore wxDataViewListStore is a specialised wxDataViewModel for storing a simple table of data. Since it derives from wxDataViewIndexListModel its data is be accessed by row (i.e. by index) instead of only by wxDataViewItem. This class actually stores the values (therefore its name) and implements all virtual methods from the base classes so it can be used directly without having to derive any class from it, but it is mostly used from within wxDataViewListCtrl. @library{wxadv} @category{dvc} */ class wxDataViewListStore: public wxDataViewIndexListModel { public: /** Constructor */ wxDataViewListStore(); /** Destructor */ ~wxDataViewListStore(); /** Prepends a data column. @a variantype indicates the type of values store in the column. This does not automatically fill in any (default) values in rows which exist in the store already. */ void PrependColumn( const wxString &varianttype ); /** Inserts a data column before @a pos. @a variantype indicates the type of values store in the column. This does not automatically fill in any (default) values in rows which exist in the store already. */ void InsertColumn( unsigned int pos, const wxString &varianttype ); /** Appends a data column. @a variantype indicates the type of values store in the column. This does not automatically fill in any (default) values in rows which exist in the store already. */ void AppendColumn( const wxString &varianttype ); /** Appends an item (=row) and fills it with @a values. The values must match the values specifies in the column in number and type. No (default) values are filled in automatically. */ void AppendItem( const wxVector &values, wxClientData *data = NULL ); /** Prepends an item (=row) and fills it with @a values. The values must match the values specifies in the column in number and type. No (default) values are filled in automatically. */ void PrependItem( const wxVector &values, wxClientData *data = NULL ); /** Inserts an item (=row) and fills it with @a values. The values must match the values specifies in the column in number and type. No (default) values are filled in automatically. */ void InsertItem( unsigned int row, const wxVector &values, wxClientData *data = NULL ); /** Delete the item (=row) at position @a pos. */ void DeleteItem( unsigned pos ); /** Delete all item (=all rows) in the store. */ void DeleteAllItems(); /** Overriden from wxDataViewModel */ virtual unsigned int GetColumnCount() const; /** Overriden from wxDataViewModel */ virtual wxString GetColumnType( unsigned int col ) const; /** Overriden from wxDataViewIndexListModel */ virtual void GetValueByRow( wxVariant &value, unsigned int row, unsigned int col ) const; /** Overriden from wxDataViewIndexListModel */ virtual bool SetValueByRow( const wxVariant &value, unsigned int row, unsigned int col ); }; /** @class wxDataViewTreeStore wxDataViewTreeStore is a specialised wxDataViewModel for stroing simple trees very much like wxTreeCtrl does and it offers a similar API. This class actually stores the entire tree and the values (therefore its name) and implements all virtual methods from the base class so it can be used directly without having to derive any class from it, but it is mostly used from within wxDataViewTreeCtrl. @library{wxadv} @category{dvc} */ class wxDataViewTreeStore : public wxDataViewModel { public: /** Constructor. Creates the invisible root node internally. */ wxDataViewTreeStore(); /** Destructor. */ virtual ~wxDataViewTreeStore(); /** Append a container. */ wxDataViewItem AppendContainer(const wxDataViewItem& parent, const wxString& text, const wxIcon& icon = wxNullIcon, const wxIcon& expanded = wxNullIcon, wxClientData* data = NULL); /** Append an item. */ wxDataViewItem AppendItem(const wxDataViewItem& parent, const wxString& text, const wxIcon& icon = wxNullIcon, wxClientData* data = NULL); /** Delete all item in the model. */ void DeleteAllItems(); /** Delete all children of the item, but not the item itself. */ void DeleteChildren(const wxDataViewItem& item); /** Delete this item. */ void DeleteItem(const wxDataViewItem& item); /** Return the number of children of item. */ int GetChildCount(const wxDataViewItem& parent) const; /** Returns the client data asoociated with the item. */ wxClientData* GetItemData(const wxDataViewItem& item) const; /** Returns the icon to display in expanded containers. */ const wxIcon& GetItemExpandedIcon(const wxDataViewItem& item) const; /** Returns the icon of the item. */ const wxIcon& GetItemIcon(const wxDataViewItem& item) const; /** Returns the text of the item. */ wxString GetItemText(const wxDataViewItem& item) const; /** Returns the nth child item of item. */ wxDataViewItem GetNthChild(const wxDataViewItem& parent, unsigned int pos) const; /** Inserts a container after @a previous. */ wxDataViewItem InsertContainer(const wxDataViewItem& parent, const wxDataViewItem& previous, const wxString& text, const wxIcon& icon = wxNullIcon, const wxIcon& expanded = wxNullIcon, wxClientData* data = NULL); /** Inserts an item after @a previous. */ wxDataViewItem InsertItem(const wxDataViewItem& parent, const wxDataViewItem& previous, const wxString& text, const wxIcon& icon = wxNullIcon, wxClientData* data = NULL); /** Inserts a container before the first child item or @a parent. */ wxDataViewItem PrependContainer(const wxDataViewItem& parent, const wxString& text, const wxIcon& icon = wxNullIcon, const wxIcon& expanded = wxNullIcon, wxClientData* data = NULL); /** Inserts an item before the first child item or @a parent. */ wxDataViewItem PrependItem(const wxDataViewItem& parent, const wxString& text, const wxIcon& icon = wxNullIcon, wxClientData* data = NULL); /** Sets the client data associated with the item. */ void SetItemData(const wxDataViewItem& item, wxClientData* data); /** Sets the expanded icon for the item. */ void SetItemExpandedIcon(const wxDataViewItem& item, const wxIcon& icon); /** Sets the icon for the item. */ void SetItemIcon(const wxDataViewItem& item, const wxIcon& icon); }; /** @class wxDataViewIconText wxDataViewIconText is used by wxDataViewIconTextRenderer for data transfer. This class can be converted to and from a wxVariant. @library{wxadv} @category{dvc} */ class wxDataViewIconText : public wxObject { public: //@{ /** Constructor. */ wxDataViewIconText(const wxString& text = wxEmptyString, const wxIcon& icon = wxNullIcon); wxDataViewIconText(const wxDataViewIconText& other); //@} /** Gets the icon. */ const wxIcon& GetIcon() const; /** Gets the text. */ wxString GetText() const; /** Set the icon. */ void SetIcon(const wxIcon& icon); /** Set the text. */ void SetText(const wxString& text); }; /** @class wxDataViewEvent This is the event class for the wxDataViewCtrl notifications. @beginEventTable{wxDataViewEvent} @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED event. @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event. @event{EVT_DATAVIEW_ITEM_COLLAPSING(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING event. @event{EVT_DATAVIEW_ITEM_COLLAPSED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED event. @event{EVT_DATAVIEW_ITEM_EXPANDING(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING event. @event{EVT_DATAVIEW_ITEM_EXPANDED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED event. @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event. @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event. @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event. @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event. @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED event. @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED event. @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG event. @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE event. @event{EVT_DATAVIEW_ITEM_DROP(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event. @event{EVT_DATAVIEW_CACHE_HINT(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_CACHE_HINT event. @endEventTable @library{wxadv} @category{events,dvc} */ class wxDataViewEvent : public wxNotifyEvent { public: /** Constructor. Typically used by wxWidgets internals only. */ wxDataViewEvent(wxEventType commandType = wxEVT_NULL, int winid = 0); /** Returns the position of the column in the control or -1 if no column field was set by the event emitter. */ int GetColumn() const; /** Returns a pointer to the wxDataViewColumn from which the event was emitted or @NULL. */ wxDataViewColumn* GetDataViewColumn() const; /** Returns the wxDataViewModel associated with the event. */ wxDataViewModel* GetModel() const; /** Returns a the position of a context menu event in screen coordinates. */ wxPoint GetPosition() const; /** Returns a reference to a value. */ const wxVariant& GetValue() const; /** Sets the column index associated with this event. */ void SetColumn(int col); /** For wxEVT_DATAVIEW_COLUMN_HEADER_CLICKED only. */ void SetDataViewColumn(wxDataViewColumn* col); /** Sets the dataview model associated with this event. */ void SetModel(wxDataViewModel* model); /** Sets the value associated with this event. */ void SetValue(const wxVariant& value); /** Set wxDataObject for data transfer within a drag operation. */ void SetDataObject( wxDataObject *obj ); /** Used internally. Gets associated wxDataObject for data transfer within a drag operation. */ wxDataObject *GetDataObject() const; /** Used internally. Sets the wxDataFormat during a drop operation. */ void SetDataFormat( const wxDataFormat &format ); /** Gets the wxDataFormat during a drop operation. */ wxDataFormat GetDataFormat() const; /** Used internally. Sets the data size for a drop data transfer. */ void SetDataSize( size_t size ); /** Gets the data size for a drop data transfer. */ size_t GetDataSize() const; /** Used internally. Sets the data buffer for a drop data transfer. */ void SetDataBuffer( void* buf ); /** Gets the data buffer for a drop data transfer. */ void *GetDataBuffer() const; /** Return the first row that will be displayed. */ int GetCacheFrom() const; /** Return the last row that will be displayed. */ int GetCacheTo() const; };