/////////////////////////////////////////////////////////////////////////////
// Name: webview.h
// Purpose: interface of wxWebView
// Author: wxWidgets team
// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
/**
Zoom levels available in wxWebView
*/
enum wxWebViewZoom
{
wxWEBVIEW_ZOOM_TINY,
wxWEBVIEW_ZOOM_SMALL,
wxWEBVIEW_ZOOM_MEDIUM, //!< default size
wxWEBVIEW_ZOOM_LARGE,
wxWEBVIEW_ZOOM_LARGEST
};
/**
The type of zooming that the web view control can perform
*/
enum wxWebViewZoomType
{
/**
The entire layout scales when zooming, including images
*/
wxWEBVIEW_ZOOM_TYPE_LAYOUT,
/**
Only the text changes in size when zooming, images and other layout
elements retain their initial size
*/
wxWEBVIEW_ZOOM_TYPE_TEXT
};
/**
Types of errors that can cause navigation to fail
*/
enum wxWebViewNavigationError
{
/** Connection error (timeout, etc.) */
wxWEBVIEW_NAV_ERR_CONNECTION,
/** Invalid certificate */
wxWEBVIEW_NAV_ERR_CERTIFICATE,
/** Authentication required */
wxWEBVIEW_NAV_ERR_AUTH,
/** Other security error */
wxWEBVIEW_NAV_ERR_SECURITY,
/** Requested resource not found */
wxWEBVIEW_NAV_ERR_NOT_FOUND,
/** Invalid request/parameters (e.g. bad URL, bad protocol,
unsupported resource type) */
wxWEBVIEW_NAV_ERR_REQUEST,
/** The user cancelled (e.g. in a dialog) */
wxWEBVIEW_NAV_ERR_USER_CANCELLED,
/** Another (exotic) type of error that didn't fit in other categories*/
wxWEBVIEW_NAV_ERR_OTHER
};
/**
Type of refresh
*/
enum wxWebViewReloadFlags
{
/** Default reload, will access cache */
wxWEBVIEW_RELOAD_DEFAULT,
/** Reload the current view without accessing the cache */
wxWEBVIEW_RELOAD_NO_CACHE
};
/**
Find flags used when searching for text on page.
*/
enum wxWebViewFindFlags
{
/** Causes the search to restart when end or beginning reached */
wxWEBVIEW_FIND_WRAP = 0x0001,
/** Matches an entire word when searching */
wxWEBVIEW_FIND_ENTIRE_WORD = 0x0002,
/** Match case, i.e. case sensitive searching */
wxWEBVIEW_FIND_MATCH_CASE = 0x0004,
/** Highlights the search results */
wxWEBVIEW_FIND_HIGHLIGHT_RESULT = 0x0008,
/** Searches for phrase in backward direction */
wxWEBVIEW_FIND_BACKWARDS = 0x0010,
/** The default flag, which is simple searching */
wxWEBVIEW_FIND_DEFAULT = 0
};
/**
Navigation action types.
@since 3.1.2
*/
enum wxWebViewNavigationActionFlags
{
/** No navigation action */
wxWEBVIEW_NAV_ACTION_NONE,
/** The navigation was started by the user */
wxWEBVIEW_NAV_ACTION_USER,
/**The navigation was started but not by the user*/
wxWEBVIEW_NAV_ACTION_OTHER
};
/**
Internet Explorer emulation modes for wxWebViewIE.
Elements of this enum can be used with wxWebView::MSWSetEmulationLevel().
Note that using the @c _FORCE variants is not recommended.
@since 3.1.3
*/
enum wxWebViewIE_EmulationLevel
{
/**
Clear FEATURE_BROWSER_EMULATION registry setting to default,
corresponding application specific registry key will be deleted
*/
wxWEBVIEWIE_EMU_DEFAULT = 0,
/** Prefer IE7 Standards mode, default value for the control. */
wxWEBVIEWIE_EMU_IE7 = 7000,
/** Prefer IE8 mode, default value for Internet Explorer 8. */
wxWEBVIEWIE_EMU_IE8 = 8000,
/** Force IE8 Standards mode, ignore !DOCTYPE directives. */
wxWEBVIEWIE_EMU_IE8_FORCE = 8888,
/** Prefer IE9 mode, default value for Internet Explorer 9. */
wxWEBVIEWIE_EMU_IE9 = 9000,
/** Force IE9 Standards mode, ignore !DOCTYPE directives. */
wxWEBVIEWIE_EMU_IE9_FORCE = 9999,
/** Prefer IE10 mode, default value for Internet Explorer 10. */
wxWEBVIEWIE_EMU_IE10 = 10000,
/** Force IE10 Standards mode, ignore !DOCTYPE directives. */
wxWEBVIEWIE_EMU_IE10_FORCE = 10001,
/** Prefer IE11 edge mode, default value for Internet Explorer 11. */
wxWEBVIEWIE_EMU_IE11 = 11000,
/** Force IE11 edge mode, ignore !DOCTYPE directives. */
wxWEBVIEWIE_EMU_IE11_FORCE = 11001
};
/**
@class wxWebViewHistoryItem
A simple class that contains the URL and title of an element of the history
of a wxWebView.
@since 2.9.3
@library{wxwebview}
@category{webview}
@see wxWebView
*/
class wxWebViewHistoryItem
{
public:
/**
Constructor.
*/
wxWebViewHistoryItem(const wxString& url, const wxString& title);
/**
@return The url of the page.
*/
wxString GetUrl();
/**
@return The title of the page.
*/
wxString GetTitle();
};
/**
@class wxWebViewFactory
An abstract factory class for creating wxWebView backends. Each
implementation of wxWebView should have its own factory.
@since 2.9.5
@library{wxwebview}
@category{webview}
@see wxWebView
*/
class wxWebViewFactory : public wxObject
{
public:
/**
Function to create a new wxWebView with two-step creation,
wxWebView::Create should be called on the returned object.
@return the created wxWebView
*/
virtual wxWebView* Create() = 0;
/**
Function to create a new wxWebView with parameters.
@param parent Parent window for the control
@param id ID of this control
@param url Initial URL to load
@param pos Position of the control
@param size Size of the control
@param style
Window style. For generic window styles, please see wxWindow.
@param name Window name.
@return the created wxWebView
*/
virtual wxWebView* Create(wxWindow* parent,
wxWindowID id,
const wxString& url = wxWebViewDefaultURLStr,
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
long style = 0,
const wxString& name = wxWebViewNameStr) = 0;
/**
Function to check if the backend is available at runtime. The
wxWebView implementation can use this function to check all
runtime requirements without trying to create a wxWebView.
@return returns @true if the backend can be used or @false if it is
not available during runtime.
@since 3.1.5
*/
virtual bool IsAvailable();
};
/**
@class wxWebViewHandler
The base class for handling custom schemes in wxWebView, for example to
allow virtual file system support.
@since 2.9.3
@library{wxwebview}
@category{webview}
@see wxWebView
*/
class wxWebViewHandler
{
public:
/**
Constructor. Takes the name of the scheme that will be handled by this
class for example @c file or @c zip.
*/
wxWebViewHandler(const wxString& scheme);
/**
@return A pointer to the file represented by @c uri.
*/
virtual wxFSFile* GetFile(const wxString &uri) = 0;
/**
@return The name of the scheme, as passed to the constructor.
*/
virtual wxString GetName() const;
/**
Sets a custom security URL. Only used by wxWebViewIE.
@since 3.1.5
*/
virtual void SetSecurityURL(const wxString& url);
/**
@return The custom security URL. Only used by wxWebViewIE.
@since 3.1.5
*/
virtual wxString GetSecurityURL() const;
};
/**
@class wxWebView
This control may be used to render web (HTML / CSS / javascript) documents.
It is designed to allow the creation of multiple backends for each port,
although currently just one is available. It differs from wxHtmlWindow in
that each backend is actually a full rendering engine, Trident on MSW and
Webkit on macOS and GTK. This allows the correct viewing of complex pages with
javascript and css.
@section descriptions Backend Descriptions
@par wxWEBVIEW_BACKEND_IE (MSW)
@anchor wxWEBVIEW_BACKEND_IE
The IE backend uses Microsoft's Trident rendering engine, specifically the
version used by the locally installed copy of Internet Explorer. As such it
is only available for the MSW port. By default recent versions of the
WebBrowser
control, which this backend uses, emulate Internet Explorer 7. This can be
changed with a registry setting by wxWebView::MSWSetEmulationLevel() see
this article for more information. This backend has full support for
custom schemes and virtual file systems.
@par wxWEBVIEW_BACKEND_EDGE (MSW)
The Edge (Chromium) backend uses Microsoft's
Edge WebView2.
It is available for Windows 7 and newer.
The following features are currently unsupported with this backend:
virtual filesystems, custom urls, find.
This backend is not enabled by default, to build it follow these steps:
- Visual Studio 2015, or newer, is required
- Download the WebView2 SDK
nuget package (Version 1.0.622.22 or newer)
- Extract the package (it's a zip archive) to @c wxWidgets/3rdparty/webview2
(you should have @c 3rdparty/webview2/build/native/include/WebView2.h
file after unpacking it)
- Enable @c wxUSE_WEBVIEW_EDGE in CMake or @c setup.h
- Build wxWidgets webview library
- Copy @c WebView2Loader.dll from the subdirectory corresponding to the
architecture used (x86 or x64) of @c wxWidgets/3rdparty/webview2/build/
to your applications executable
- At runtime you can use wxWebView::IsBackendAvailable() to check if the
backend can be used (it will be available if @c WebView2Loader.dll can be
loaded and Edge (Chromium) is installed)
- Make sure to add a note about using the WebView2 SDK to your application
documentation, as required by its licence
@par wxWEBVIEW_WEBKIT (GTK)
Under GTK the WebKit backend uses
WebKitGTK+. The current minimum version
required is 1.3.1 which ships by default with Ubuntu Natty and Debian
Wheezy and has the package name libwebkitgtk-dev. Custom schemes and
virtual files systems are supported under this backend, however embedded
resources such as images and stylesheets are currently loaded using the
data:// scheme.
@par wxWEBVIEW_WEBKIT2 (GTK3)
Under GTK3 the WebKit2 version of WebKitGTK+
is used. In Ubuntu the required package name is libwebkit2gtk-4.0-dev
and under Fedora it is webkitgtk4-devel. All wxWEBVIEW_WEBKIT features are
supported except for clearing and enabling / disabling the history.
@par wxWEBVIEW_WEBKIT (OSX)
The macOS WebKit backend uses Apple's
WebView
class. This backend has full support for custom schemes and virtual file
systems.
@section async Asynchronous Notifications
Many of the methods in wxWebView are asynchronous, i.e. they return
immediately and perform their work in the background. This includes
functions such as LoadURL() and Reload(). To receive notification of the
progress and completion of these functions you need to handle the events
that are provided. Specifically @c wxEVT_WEBVIEW_LOADED notifies
when the page or a sub-frame has finished loading and
@c wxEVT_WEBVIEW_ERROR notifies that an error has occurred.
@section vfs Virtual File Systems and Custom Schemes
wxWebView supports the registering of custom scheme handlers, for example
@c file or @c http. To do this create a new class which inherits from
wxWebViewHandler, where wxWebHandler::GetFile() returns a pointer to a
wxFSFile which represents the given url. You can then register your handler
with RegisterHandler() it will be called for all pages and resources.
wxWebViewFSHandler is provided to access the virtual file system encapsulated by
wxFileSystem. The wxMemoryFSHandler documentation gives an example of how this
may be used.
wxWebViewArchiveHandler is provided to allow the navigation of pages inside a zip
archive. It supports paths of the form:
@c scheme:///C:/example/docs.zip;protocol=zip/main.htm
@beginEventEmissionTable{wxWebViewEvent}
@event{EVT_WEBVIEW_NAVIGATING(id, func)}
Process a @c wxEVT_WEBVIEW_NAVIGATING event, generated before trying
to get a resource. This event may be vetoed to prevent navigating to this
resource. Note that if the displayed HTML document has several frames, one
such event will be generated per frame.
@event{EVT_WEBVIEW_NAVIGATED(id, func)}
Process a @c wxEVT_WEBVIEW_NAVIGATED event generated after it was
confirmed that a resource would be requested. This event may not be vetoed.
Note that if the displayed HTML document has several frames, one such event
will be generated per frame.
@event{EVT_WEBVIEW_LOADED(id, func)}
Process a @c wxEVT_WEBVIEW_LOADED event generated when the document
is fully loaded and displayed. Note that if the displayed HTML document has
several frames, one such event will be generated per frame.
@event{EVT_WEBVIEW_ERROR(id, func)}
Process a @c wxEVT_WEBVIEW_ERROR event generated when a navigation
error occurs.
The integer associated with this event will be a wxWebNavigationError item.
The string associated with this event may contain a backend-specific more
precise error message/code.
@event{EVT_WEBVIEW_NEWWINDOW(id, func)}
Process a @c wxEVT_WEBVIEW_NEWWINDOW event, generated when a new
window is created. You must handle this event if you want anything to
happen, for example to load the page in a new window or tab.
@event{EVT_WEBVIEW_TITLE_CHANGED(id, func)}
Process a @c wxEVT_WEBVIEW_TITLE_CHANGED event, generated when
the page title changes. Use GetString to get the title.
@endEventTable
@since 2.9.3
@library{wxwebview}
@category{ctrl,webview}
@see wxWebViewHandler, wxWebViewEvent
*/
class wxWebView : public wxControl
{
public:
/**
Creation function for two-step creation.
*/
virtual bool Create(wxWindow* parent,
wxWindowID id,
const wxString& url = wxWebViewDefaultURLStr,
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
long style = 0,
const wxString& name = wxWebViewNameStr) = 0;
/**
Factory function to create a new wxWebView with two-step creation,
wxWebView::Create should be called on the returned object.
@param backend The backend web rendering engine to use.
@c wxWebViewBackendDefault, @c wxWebViewBackendIE and
@c wxWebViewBackendWebKit are predefined where appropriate.
@return The created wxWebView
@since 2.9.5
*/
static wxWebView* New(const wxString& backend = wxWebViewBackendDefault);
/**
Factory function to create a new wxWebView using a wxWebViewFactory.
@param parent Parent window for the control
@param id ID of this control
@param url Initial URL to load
@param pos Position of the control
@param size Size of the control
@param backend The backend web rendering engine to use.
@c wxWebViewBackendDefault, @c wxWebViewBackendIE and
@c wxWebViewBackendWebKit are predefined where appropriate.
@param style
Window style. For generic window styles, please see wxWindow.
@param name Window name.
@return The created wxWebView, or @c NULL if the requested backend
is not available
@since 2.9.5
*/
static wxWebView* New(wxWindow* parent,
wxWindowID id,
const wxString& url = wxWebViewDefaultURLStr,
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
const wxString& backend = wxWebViewBackendDefault,
long style = 0,
const wxString& name = wxWebViewNameStr);
/**
Allows the registering of new backend for wxWebView. @a backend can be
used as an argument to New().
@param backend The name for the new backend to be registered under
@param factory A shared pointer to the factory which creates the
appropriate backend.
@since 2.9.5
*/
static void RegisterFactory(const wxString& backend,
wxSharedPtr factory);
/**
Allows to check if a specific backend is currently available.
@since 3.1.4
*/
static bool IsBackendAvailable(const wxString& backend);
/**
Get the title of the current web page, or its URL/path if title is not
available.
*/
virtual wxString GetCurrentTitle() const = 0;
/**
Get the URL of the currently displayed document.
*/
virtual wxString GetCurrentURL() const = 0;
/**
Return the pointer to the native backend used by this control.
This method can be used to retrieve the pointer to the native rendering
engine used by this control. The return value needs to be down-casted
to the appropriate type depending on the platform: under Windows, it's
a pointer to IWebBrowser2 interface, under macOS it's a WebView pointer
and under GTK it's a WebKitWebView.
For example, you could set the WebKit options using this method:
@code
#include
#ifdef __WXGTK__
WebKitWebView*
wv = static_cast(m_window->GetNativeBackend());
WebKitWebSettings* settings = webkit_web_view_get_settings(wv);
g_object_set(G_OBJECT(settings),
"enable-frame-flattening", TRUE,
NULL);
#endif
@endcode
@since 2.9.5
*/
virtual void* GetNativeBackend() const = 0;
/**
Get the HTML source code of the currently displayed document.
@return The HTML source code, or an empty string if no page is currently
shown.
*/
virtual wxString GetPageSource() const = 0;
/**
Get the text of the current page.
*/
virtual wxString GetPageText() const = 0;
/**
Returns whether the web control is currently busy (e.g.\ loading a page).
*/
virtual bool IsBusy() const = 0;
/**
Returns whether the web control is currently editable
*/
virtual bool IsEditable() const = 0;
/**
Load a web page from a URL
@param url The URL of the page to be loaded.
@note Web engines generally report errors asynchronously, so if you wish
to know whether loading the URL was successful, register to receive
navigation error events.
*/
virtual void LoadURL(const wxString& url) = 0;
/**
Opens a print dialog so that the user may print the currently
displayed page.
*/
virtual void Print() = 0;
/**
Registers a custom scheme handler.
@param handler A shared pointer to a wxWebHandler.
*/
virtual void RegisterHandler(wxSharedPtr handler) = 0;
/**
Reload the currently displayed URL.
@param flags A bit array that may optionally contain reload options.
@note The flags are ignored by the edge backend.
*/
virtual void Reload(wxWebViewReloadFlags flags = wxWEBVIEW_RELOAD_DEFAULT) = 0;
/**
Runs the given JavaScript code.
JavaScript code is executed inside the browser control and has full
access to DOM and other browser-provided functionality. For example,
this code
@code
webview->RunScript("document.write('Hello from wxWidgets!')");
@endcode
will replace the current page contents with the provided string.
If @a output is non-null, it is filled with the result of executing
this code on success, e.g. a JavaScript value such as a string, a
number (integer or floating point), a boolean or JSON representation
for non-primitive types such as arrays and objects. For example:
@code
wxString result;
if ( webview->RunScript
(
"document.getElementById('some_id').innerHTML",
&result
) )
{
... result contains the contents of the given element ...
}
//else: the element with this ID probably doesn't exist.
@endcode
This function has a few platform-specific limitations:
- When using WebKit v1 in wxGTK2, retrieving the result of JavaScript
execution is unsupported and this function will always return false
if @a output is non-null to indicate this. This functionality is
fully supported when using WebKit v2 or later in wxGTK3.
- When using WebKit under macOS, code execution is limited to at most
10MiB of memory and 10 seconds of execution time.
- When using IE backend under MSW, scripts can only be executed when
the current page is fully loaded (i.e. @c wxEVT_WEBVIEW_LOADED event
was received). A script tag inside the page HTML is required in order
to run JavaScript.
Also notice that under MSW converting JavaScript objects to JSON is not
supported in the default emulation mode. wxWebView implements its own
object-to-JSON conversion as a fallback for this case, however it is
not as full-featured, well-tested or performing as the implementation
of this functionality in the browser control itself, so it is
recommended to use MSWSetEmulationLevel() to change emulation
level to a more modern one in which JSON conversion is done by the
control itself.
@param javascript JavaScript code to execute.
@param output Pointer to a string to be filled with the result value or
@NULL if it is not needed. This parameter is new since wxWidgets
version 3.1.1.
@return @true if there is a result, @false if there is an error.
*/
virtual bool RunScript(const wxString& javascript, wxString* output = NULL) = 0;
/**
Set the editable property of the web control. Enabling allows the user
to edit the page even if the @c contenteditable attribute is not set.
The exact capabilities vary with the backend being used.
*/
virtual void SetEditable(bool enable = true) = 0;
/**
Set the displayed page source to the contents of the given string.
@param html The string that contains the HTML data to display.
@param baseUrl URL assigned to the HTML data, to be used to resolve
relative paths, for instance.
@note When using @c wxWEBVIEW_BACKEND_IE you must wait for the current
page to finish loading before calling SetPage(). The baseURL
parameter is not used in this backend and the edge backend.
*/
virtual void SetPage(const wxString& html, const wxString& baseUrl) = 0;
/**
Set the displayed page source to the contents of the given stream.
@param html The stream to read HTML data from.
@param baseUrl URL assigned to the HTML data, to be used to resolve
relative paths, for instance.
*/
virtual void SetPage(wxInputStream& html, wxString baseUrl);
/**
Stop the current page loading process, if any.
May trigger an error event of type @c wxWEBVIEW_NAV_ERR_USER_CANCELLED.
TODO: make @c wxWEBVIEW_NAV_ERR_USER_CANCELLED errors uniform across ports.
*/
virtual void Stop() = 0;
/**
@name Clipboard
*/
/**
Returns @true if the current selection can be copied.
@note This always returns @c true on the macOS WebKit backend.
*/
virtual bool CanCopy() const = 0;
/**
Returns @true if the current selection can be cut.
@note This always returns @c true on the macOS WebKit backend.
*/
virtual bool CanCut() const = 0;
/**
Returns @true if data can be pasted.
@note This always returns @c true on the macOS WebKit backend.
*/
virtual bool CanPaste() const = 0;
/**
Copies the current selection.
*/
virtual void Copy() = 0;
/**
Cuts the current selection.
*/
virtual void Cut() = 0;
/**
Pastes the current data.
*/
virtual void Paste() = 0;
/**
@name Context Menu
*/
/**
Enable or disable the right click context menu.
By default the standard context menu is enabled, this method can be
used to disable it or re-enable it later.
@since 2.9.5
*/
virtual void EnableContextMenu(bool enable = true);
/**
Returns @true if a context menu will be shown on right click.
@since 2.9.5
*/
virtual bool IsContextMenuEnabled() const;
/**
@name Dev Tools
*/
/**
Enable or disable access to dev tools for the user.
This is currently only implemented for the Edge (Chromium) backend
where the dev tools are enabled by default.
@since 3.1.4
*/
virtual void EnableAccessToDevTools(bool enable = true);
/**
Returns @true if dev tools are available to the user.
@since 3.1.4
*/
virtual bool IsAccessToDevToolsEnabled() const;
/**
@name History
*/
/**
Returns @true if it is possible to navigate backward in the history of
visited pages.
*/
virtual bool CanGoBack() const = 0;
/**
Returns @true if it is possible to navigate forward in the history of
visited pages.
*/
virtual bool CanGoForward() const = 0;
/**
Clear the history, this will also remove the visible page.
@note This is not implemented on the WebKit2GTK+ backend.
*/
virtual void ClearHistory() = 0;
/**
Enable or disable the history. This will also clear the history.
@note This is not implemented on the WebKit2GTK+ backend.
*/
virtual void EnableHistory(bool enable = true) = 0;
/**
Returns a list of items in the back history. The first item in the
vector is the first page that was loaded by the control.
*/
virtual wxVector > GetBackwardHistory() = 0;
/**
Returns a list of items in the forward history. The first item in the
vector is the next item in the history with respect to the currently
loaded page.
*/
virtual wxVector > GetForwardHistory() = 0;
/**
Navigate back in the history of visited pages.
Only valid if CanGoBack() returns true.
*/
virtual void GoBack() = 0;
/**
Navigate forward in the history of visited pages.
Only valid if CanGoForward() returns true.
*/
virtual void GoForward() = 0;
/**
Loads a history item.
*/
virtual void LoadHistoryItem(wxSharedPtr item) = 0;
/**
@name Selection
*/
/**
Clears the current selection.
*/
virtual void ClearSelection() = 0;
/**
Deletes the current selection. Note that for @c wxWEBVIEW_BACKEND_WEBKIT
the selection must be editable, either through SetEditable or the
correct HTML attribute.
*/
virtual void DeleteSelection() = 0;
/**
Returns the currently selected source, if any.
*/
virtual wxString GetSelectedSource() const = 0;
/**
Returns the currently selected text, if any.
*/
virtual wxString GetSelectedText() const = 0;
/**
Returns @true if there is a current selection.
*/
virtual bool HasSelection() const = 0;
/**
Selects the entire page.
*/
virtual void SelectAll() = 0;
/**
@name Undo / Redo
*/
/**
Returns @true if there is an action to redo.
*/
virtual bool CanRedo() const = 0;
/**
Returns @true if there is an action to undo.
*/
virtual bool CanUndo() const = 0;
/**
Redos the last action.
*/
virtual void Redo() = 0;
/**
Undos the last action.
*/
virtual void Undo() = 0;
/**
@name Finding
*/
/**
Finds a phrase on the current page and if found, the control will
scroll the phrase into view and select it.
@param text The phrase to search for.
@param flags The flags for the search.
@return If search phrase was not found in combination with the flags
then @c wxNOT_FOUND is returned. If called for the first time
with search phrase then the total number of results will be
returned. Then for every time its called with the same search
phrase it will return the number of the current match.
@note This function will restart the search if the flags
@c wxWEBVIEW_FIND_ENTIRE_WORD or @c wxWEBVIEW_FIND_MATCH_CASE
are changed, since this will require a new search. To reset the
search, for example resetting the highlights call the function
with an empty search phrase. This always returns @c wxNOT_FOUND
on the macOS WebKit backend.
@since 2.9.5
*/
virtual long Find(const wxString& text, wxWebViewFindFlags flags = wxWEBVIEW_FIND_DEFAULT) = 0;
/**
@name Zoom
*/
/**
Retrieve whether the current HTML engine supports a zoom type.
@param type The zoom type to test.
@return Whether this type of zoom is supported by this HTML engine
(and thus can be set through SetZoomType()).
*/
virtual bool CanSetZoomType(wxWebViewZoomType type) const = 0;
/**
Get the zoom level of the page.
See GetZoomFactor() to get more precise zoom scale value other than
as provided by @c wxWebViewZoom.
@return The current level of zoom.
*/
virtual wxWebViewZoom GetZoom() const = 0;
/**
Get the zoom factor of the page.
@return The current factor of zoom.
@since 3.1.4
*/
virtual float GetZoomFactor() const = 0;
/**
Get how the zoom factor is currently interpreted.
@return How the zoom factor is currently interpreted by the HTML engine.
*/
virtual wxWebViewZoomType GetZoomType() const = 0;
/**
Set the zoom level of the page.
See SetZoomFactor() for more precise scaling other than the measured
steps provided by @c wxWebViewZoom.
@param zoom How much to zoom (scale) the HTML document.
*/
virtual void SetZoom(wxWebViewZoom zoom) = 0;
/**
Set the zoom factor of the page.
@param zoom How much to zoom (scale) the HTML document in arbitrary
number.
@note zoom scale in IE will be converted into @c wxWebViewZoom levels
for @c wxWebViewZoomType of @c wxWEBVIEW_ZOOM_TYPE_TEXT.
@since 3.1.4
*/
virtual void SetZoomFactor(float zoom) = 0;
/**
Set how to interpret the zoom factor.
@param zoomType How the zoom factor should be interpreted by the
HTML engine.
@note invoke CanSetZoomType() first, some HTML renderers may not
support all zoom types.
*/
virtual void SetZoomType(wxWebViewZoomType zoomType) = 0;
};
/**
@class wxWebViewIE
wxWebView using IE backend, see @ref wxWEBVIEW_BACKEND_IE.
@onlyfor{wxmsw}
@since 2.9.3
@library{wxwebview}
@category{ctrl,webview}
@see wxWebView
*/
class wxWebViewIE : public wxWebView
{
public:
/**
Sets emulation level.
This function is useful to change the emulation level of
the system browser control used for wxWebView implementation under
MSW, rather than using the currently default, IE7-compatible, level.
Please notice that this function works by modifying the per-user part
of MSW registry, which has several implications: first, it is
sufficient to call it only once (per user) as the changes done by it
are persistent and, second, if you do not want them to be persistent,
you need to call it with @c wxWEBVIEWIE_EMU_DEFAULT argument explicitly.
In particular, this function should be called to allow RunScript() to
work for JavaScript code returning arbitrary objects, which is not
supported at the default emulation level.
If set to a level higher than installed version, the highest available
level will be used instead. @c wxWEBVIEWIE_EMU_IE11 is recommended for
best performance and experience.
This function is MSW-specific and doesn't exist under other platforms.
See https://msdn.microsoft.com/en-us/library/ee330730#browser_emulation
for more information about browser control emulation levels.
@param level the target emulation level
@return @true on success, @false on failure (a warning message is also
logged in the latter case).
@since 3.1.3
*/
static bool MSWSetEmulationLevel(wxWebViewIE_EmulationLevel level = wxWEBVIEWIE_EMU_IE11);
/**
@deprecated
This function is kept mostly for backwards compatibility.
Please explicitly specify emulation level with MSWSetEmulationLevel().
@param modernLevel @true to set level to IE8, synonym for @c wxWEBVIEWIE_EMU_IE8.
@false to reset the emulation level to its default,
synonym for @c wxWEBVIEWIE_EMU_DEFAULT.
@return @true on success, @false on failure (a warning message is also
logged in the latter case).
@since 3.1.1
*/
static bool MSWSetModernEmulationLevel(bool modernLevel = true);
};
/**
@class wxWebViewEvent
A navigation event holds information about events associated with
wxWebView objects.
@beginEventEmissionTable{wxWebViewEvent}
@event{EVT_WEBVIEW_NAVIGATING(id, func)}
Process a @c wxEVT_WEBVIEW_NAVIGATING event, generated before trying
to get a resource. This event may be vetoed to prevent navigating to this
resource. Note that if the displayed HTML document has several frames, one
such event will be generated per frame.
@event{EVT_WEBVIEW_NAVIGATED(id, func)}
Process a @c wxEVT_WEBVIEW_NAVIGATED event generated after it was
confirmed that a resource would be requested. This event may not be vetoed.
Note that if the displayed HTML document has several frames, one such event
will be generated per frame.
@event{EVT_WEBVIEW_LOADED(id, func)}
Process a @c wxEVT_WEBVIEW_LOADED event generated when the document
is fully loaded and displayed. Note that if the displayed HTML document has
several frames, one such event will be generated per frame.
@event{EVT_WEBVIEW_ERROR(id, func)}
Process a @c wxEVT_WEBVIEW_ERROR event generated when a navigation
error occurs.
The integer associated with this event will be a #wxWebViewNavigationError item.
The string associated with this event may contain a backend-specific more
precise error message/code.
@event{EVT_WEBVIEW_NEWWINDOW(id, func)}
Process a @c wxEVT_WEBVIEW_NEWWINDOW event, generated when a new
window is created. You must handle this event if you want anything to
happen, for example to load the page in a new window or tab.
@event{EVT_WEBVIEW_TITLE_CHANGED(id, func)}
Process a @c wxEVT_WEBVIEW_TITLE_CHANGED event, generated when
the page title changes. Use GetString to get the title.
@endEventTable
@since 2.9.3
@library{wxwebview}
@category{events,webview}
@see wxWebView
*/
class wxWebViewEvent : public wxNotifyEvent
{
public:
wxWebViewEvent();
wxWebViewEvent(wxEventType type, int id, const wxString href,
const wxString target,
wxWebViewNavigationActionFlags flags = wxWEBVIEW_NAV_ACTION_NONE);
/**
Get the name of the target frame which the url of this event
has been or will be loaded into. This may return an empty string
if the frame is not available.
*/
const wxString& GetTarget() const;
/**
Get the URL being visited
*/
const wxString& GetURL() const;
/**
Get the type of navigation action. Only valid for events of type
@c wxEVT_WEBVIEW_NEWWINDOW
@since 3.1.2
*/
wxWebViewNavigationActionFlags GetNavigationAction() const;
};
wxEventType wxEVT_WEBVIEW_NAVIGATING;
wxEventType wxEVT_WEBVIEW_NAVIGATED;
wxEventType wxEVT_WEBVIEW_LOADED;
wxEventType wxEVT_WEBVIEW_ERROR;
wxEventType wxEVT_WEBVIEW_NEWWINDOW;
wxEventType wxEVT_WEBVIEW_TITLE_CHANGED;