///////////////////////////////////////////////////////////////////////////// // Name: dialogs.cpp // Purpose: Common dialogs demo // Author: Julian Smart, Vadim Zeitlin, ABX // Created: 04/01/98 // Copyright: (c) Julian Smart // (c) 2004 ABX // (c) Vadim Zeitlin // Licence: wxWindows licence ///////////////////////////////////////////////////////////////////////////// // For compilers that support precompilation, includes "wx/wx.h". #include "wx/wxprec.h" #ifdef __BORLANDC__ #pragma hdrstop #endif #ifndef WX_PRECOMP #include "wx/wx.h" #endif #include "../sample.xpm" #include "wx/apptrait.h" #include "wx/datetime.h" #include "wx/filename.h" #include "wx/image.h" #include "wx/bookctrl.h" #include "wx/artprov.h" #include "wx/imaglist.h" #include "wx/minifram.h" #include "wx/sysopt.h" #include "wx/notifmsg.h" #include "wx/modalhook.h" #if wxUSE_RICHMSGDLG #include "wx/richmsgdlg.h" #endif // wxUSE_RICHMSGDLG #if wxUSE_COLOURDLG #include "wx/colordlg.h" #endif // wxUSE_COLOURDLG #if wxUSE_CHOICEDLG #include "wx/choicdlg.h" #endif // wxUSE_CHOICEDLG #include "wx/rearrangectrl.h" #if wxUSE_STARTUP_TIPS #include "wx/tipdlg.h" #endif // wxUSE_STARTUP_TIPS #if wxUSE_PROGRESSDLG #if wxUSE_STOPWATCH && wxUSE_LONGLONG #include "wx/datetime.h" // wxDateTime #endif #include "wx/progdlg.h" #endif // wxUSE_PROGRESSDLG #if wxUSE_ABOUTDLG #include "wx/aboutdlg.h" // these headers are only needed for custom about dialog #include "wx/statline.h" #include "wx/generic/aboutdlgg.h" #endif // wxUSE_ABOUTDLG #if wxUSE_BUSYINFO #include "wx/busyinfo.h" #endif // wxUSE_BUSYINFO #if wxUSE_NUMBERDLG #include "wx/numdlg.h" #endif // wxUSE_NUMBERDLG #if wxUSE_FILEDLG #include "wx/filedlg.h" #endif // wxUSE_FILEDLG #if wxUSE_DIRDLG #include "wx/dirdlg.h" #endif // wxUSE_DIRDLG #if wxUSE_FONTDLG #include "wx/fontdlg.h" #endif // wxUSE_FONTDLG #if wxUSE_FINDREPLDLG #include "wx/fdrepdlg.h" #endif // wxUSE_FINDREPLDLG #if wxUSE_INFOBAR #include "wx/infobar.h" #endif // wxUSE_INFOBAR #include "wx/spinctrl.h" #include "wx/propdlg.h" #include "dialogs.h" #if USE_COLOURDLG_GENERIC #include "wx/generic/colrdlgg.h" #endif // USE_COLOURDLG_GENERIC #if USE_DIRDLG_GENERIC #include "wx/generic/dirdlgg.h" #endif // USE_DIRDLG_GENERIC #if USE_FILEDLG_GENERIC #include "wx/generic/filedlgg.h" #endif // USE_FILEDLG_GENERIC #if USE_FONTDLG_GENERIC #include "wx/generic/fontdlgg.h" #endif // USE_FONTDLG_GENERIC IMPLEMENT_APP(MyApp) BEGIN_EVENT_TABLE(MyCanvas, wxScrolledWindow) EVT_PAINT(MyCanvas::OnPaint) END_EVENT_TABLE() BEGIN_EVENT_TABLE(MyFrame, wxFrame) #if wxUSE_MSGDLG EVT_MENU(DIALOGS_MESSAGE_BOX, MyFrame::MessageBox) EVT_MENU(DIALOGS_MESSAGE_BOX_WINDOW_MODAL, MyFrame::MessageBoxWindowModal) EVT_MENU(DIALOGS_MESSAGE_DIALOG, MyFrame::MessageBoxDialog) EVT_MENU(DIALOGS_MESSAGE_BOX_WXINFO, MyFrame::MessageBoxInfo) #endif // wxUSE_MSGDLG #if wxUSE_RICHMSGDLG EVT_MENU(DIALOGS_RICH_MESSAGE_DIALOG, MyFrame::RichMessageDialog) #endif // wxUSE_RICHMSGDLG #if wxUSE_COLOURDLG EVT_MENU(DIALOGS_CHOOSE_COLOUR, MyFrame::ChooseColour) EVT_MENU(DIALOGS_GET_COLOUR, MyFrame::GetColour) #endif // wxUSE_COLOURDLG #if wxUSE_FONTDLG EVT_MENU(DIALOGS_CHOOSE_FONT, MyFrame::ChooseFont) #endif // wxUSE_FONTDLG #if wxUSE_LOG_DIALOG EVT_MENU(DIALOGS_LOG_DIALOG, MyFrame::LogDialog) #endif // wxUSE_LOG_DIALOG #if wxUSE_INFOBAR EVT_MENU(DIALOGS_INFOBAR_SIMPLE, MyFrame::InfoBarSimple) EVT_MENU(DIALOGS_INFOBAR_ADVANCED, MyFrame::InfoBarAdvanced) #endif // wxUSE_INFOBAR #if wxUSE_TEXTDLG EVT_MENU(DIALOGS_LINE_ENTRY, MyFrame::LineEntry) EVT_MENU(DIALOGS_TEXT_ENTRY, MyFrame::TextEntry) EVT_MENU(DIALOGS_PASSWORD_ENTRY, MyFrame::PasswordEntry) #endif // wxUSE_TEXTDLG #if wxUSE_NUMBERDLG EVT_MENU(DIALOGS_NUM_ENTRY, MyFrame::NumericEntry) #endif // wxUSE_NUMBERDLG #if wxUSE_CHOICEDLG EVT_MENU(DIALOGS_SINGLE_CHOICE, MyFrame::SingleChoice) EVT_MENU(DIALOGS_MULTI_CHOICE, MyFrame::MultiChoice) #endif // wxUSE_CHOICEDLG #if wxUSE_REARRANGECTRL EVT_MENU(DIALOGS_REARRANGE, MyFrame::Rearrange) #endif // wxUSE_REARRANGECTRL #if wxUSE_FILEDLG EVT_MENU(DIALOGS_FILE_OPEN, MyFrame::FileOpen) EVT_MENU(DIALOGS_FILE_OPEN2, MyFrame::FileOpen2) EVT_MENU(DIALOGS_FILES_OPEN, MyFrame::FilesOpen) EVT_MENU(DIALOGS_FILE_SAVE, MyFrame::FileSave) #endif // wxUSE_FILEDLG #if USE_FILEDLG_GENERIC EVT_MENU(DIALOGS_FILE_OPEN_GENERIC, MyFrame::FileOpenGeneric) EVT_MENU(DIALOGS_FILES_OPEN_GENERIC, MyFrame::FilesOpenGeneric) EVT_MENU(DIALOGS_FILE_SAVE_GENERIC, MyFrame::FileSaveGeneric) #endif // USE_FILEDLG_GENERIC #if wxUSE_DIRDLG EVT_MENU(DIALOGS_DIR_CHOOSE, MyFrame::DirChoose) EVT_MENU(DIALOGS_DIRNEW_CHOOSE, MyFrame::DirChooseNew) #endif // wxUSE_DIRDLG #if USE_MODAL_PRESENTATION EVT_MENU(DIALOGS_MODAL, MyFrame::ModalDlg) #endif // USE_MODAL_PRESENTATION EVT_MENU(DIALOGS_MODELESS, MyFrame::ModelessDlg) EVT_MENU(DIALOGS_CENTRE_SCREEN, MyFrame::DlgCenteredScreen) EVT_MENU(DIALOGS_CENTRE_PARENT, MyFrame::DlgCenteredParent) #if wxUSE_MINIFRAME EVT_MENU(DIALOGS_MINIFRAME, MyFrame::MiniFrame) #endif // wxUSE_MINIFRAME EVT_MENU(DIALOGS_ONTOP, MyFrame::DlgOnTop) #if wxUSE_STARTUP_TIPS EVT_MENU(DIALOGS_TIP, MyFrame::ShowTip) #endif // wxUSE_STARTUP_TIPS #if USE_FONTDLG_GENERIC EVT_MENU(DIALOGS_CHOOSE_FONT_GENERIC, MyFrame::ChooseFontGeneric) #endif // USE_FONTDLG_GENERIC #if USE_DIRDLG_GENERIC EVT_MENU(DIALOGS_GENERIC_DIR_CHOOSE, MyFrame::GenericDirChoose) #endif // wxMSW || wxMAC #if USE_COLOURDLG_GENERIC EVT_MENU(DIALOGS_CHOOSE_COLOUR_GENERIC, MyFrame::ChooseColourGeneric) #endif // USE_COLOURDLG_GENERIC #if wxUSE_PROGRESSDLG EVT_MENU(DIALOGS_PROGRESS, MyFrame::ShowProgress) #endif // wxUSE_PROGRESSDLG #if wxUSE_ABOUTDLG EVT_MENU(DIALOGS_ABOUTDLG_SIMPLE, MyFrame::ShowSimpleAboutDialog) EVT_MENU(DIALOGS_ABOUTDLG_FANCY, MyFrame::ShowFancyAboutDialog) EVT_MENU(DIALOGS_ABOUTDLG_FULL, MyFrame::ShowFullAboutDialog) EVT_MENU(DIALOGS_ABOUTDLG_CUSTOM, MyFrame::ShowCustomAboutDialog) #endif // wxUSE_ABOUTDLG #if wxUSE_BUSYINFO EVT_MENU(DIALOGS_BUSYINFO, MyFrame::ShowBusyInfo) #endif // wxUSE_BUSYINFO #if wxUSE_FINDREPLDLG EVT_MENU(DIALOGS_FIND, MyFrame::ShowFindDialog) EVT_MENU(DIALOGS_REPLACE, MyFrame::ShowReplaceDialog) EVT_FIND(wxID_ANY, MyFrame::OnFindDialog) EVT_FIND_NEXT(wxID_ANY, MyFrame::OnFindDialog) EVT_FIND_REPLACE(wxID_ANY, MyFrame::OnFindDialog) EVT_FIND_REPLACE_ALL(wxID_ANY, MyFrame::OnFindDialog) EVT_FIND_CLOSE(wxID_ANY, MyFrame::OnFindDialog) #endif // wxUSE_FINDREPLDLG #if USE_SETTINGS_DIALOG EVT_MENU(DIALOGS_PROPERTY_SHEET, MyFrame::OnPropertySheet) EVT_MENU(DIALOGS_PROPERTY_SHEET_TOOLBOOK, MyFrame::OnPropertySheet) EVT_MENU(DIALOGS_PROPERTY_SHEET_BUTTONTOOLBOOK, MyFrame::OnPropertySheet) #endif // USE_SETTINGS_DIALOG EVT_MENU(DIALOGS_STANDARD_BUTTON_SIZER_DIALOG, MyFrame::OnStandardButtonsSizerDialog) EVT_MENU(DIALOGS_TEST_DEFAULT_ACTION, MyFrame::OnTestDefaultActionDialog) EVT_MENU(DIALOGS_MODAL_HOOK, MyFrame::OnModalHook) EVT_MENU(DIALOGS_REQUEST, MyFrame::OnRequestUserAttention) #if wxUSE_NOTIFICATION_MESSAGE EVT_MENU(DIALOGS_NOTIFY_AUTO, MyFrame::OnNotifMsgAuto) EVT_MENU(DIALOGS_NOTIFY_SHOW, MyFrame::OnNotifMsgShow) EVT_MENU(DIALOGS_NOTIFY_HIDE, MyFrame::OnNotifMsgHide) #endif // wxUSE_NOTIFICATION_MESSAGE #if wxUSE_RICHTOOLTIP EVT_MENU(DIALOGS_RICHTIP_DIALOG, MyFrame::OnRichTipDialog) #endif // wxUSE_RICHTOOLTIP EVT_MENU(wxID_EXIT, MyFrame::OnExit) END_EVENT_TABLE() #if USE_MODAL_PRESENTATION BEGIN_EVENT_TABLE(MyModalDialog, wxDialog) EVT_BUTTON(wxID_ANY, MyModalDialog::OnButton) END_EVENT_TABLE() BEGIN_EVENT_TABLE(MyModelessDialog, wxDialog) EVT_BUTTON(DIALOGS_MODELESS_BTN, MyModelessDialog::OnButton) EVT_CLOSE(MyModelessDialog::OnClose) END_EVENT_TABLE() #endif // USE_MODAL_PRESENTATION BEGIN_EVENT_TABLE(StdButtonSizerDialog, wxDialog) EVT_CHECKBOX(wxID_ANY, StdButtonSizerDialog::OnEvent) EVT_RADIOBUTTON(wxID_ANY, StdButtonSizerDialog::OnEvent) END_EVENT_TABLE() #if wxUSE_CMDLINE_PARSER #include "wx/cmdline.h" static const char *PROGRESS_SWITCH = "progress"; void MyApp::OnInitCmdLine(wxCmdLineParser& parser) { wxApp::OnInitCmdLine(parser); parser.AddOption("", PROGRESS_SWITCH, "Style for the startup progress dialog (wxPD_XXX)", wxCMD_LINE_VAL_NUMBER); } bool MyApp::OnCmdLineParsed(wxCmdLineParser& parser) { if ( !wxApp::OnCmdLineParsed(parser) ) return false; parser.Found(PROGRESS_SWITCH, &m_startupProgressStyle); return true; } #endif // wxUSE_CMDLINE_PARSER // `Main program' equivalent, creating windows and returning main app frame bool MyApp::OnInit() { if ( !wxApp::OnInit() ) return false; #if wxUSE_PROGRESSDLG if ( m_startupProgressStyle != -1 ) { // Show a test progress dialog before the main event loop is started: // it should still work. const int PROGRESS_COUNT = 100; wxProgressDialog dlg ( "Progress in progress", "Please wait, starting...", PROGRESS_COUNT, NULL, m_startupProgressStyle ); for ( int i = 0; i <= PROGRESS_COUNT; i++ ) { if ( !dlg.Update(i) ) break; wxMilliSleep(50); } } #endif // wxUSE_PROGRESSDLG #if wxUSE_IMAGE wxInitAllImageHandlers(); #endif // Create the main frame window MyFrame *frame = new MyFrame(wxT("wxWidgets dialogs example")); // Make a menubar wxMenu *menuDlg = new wxMenu; menuDlg->Append(DIALOGS_MESSAGE_BOX, wxT("&Message box\tCtrl-M")); menuDlg->Append(DIALOGS_MESSAGE_BOX_WINDOW_MODAL, wxT("Window-Modal Message box ")); menuDlg->Append(DIALOGS_MESSAGE_DIALOG, wxT("Message dialog\tShift-Ctrl-M")); #if wxUSE_RICHMSGDLG menuDlg->Append(DIALOGS_RICH_MESSAGE_DIALOG, wxT("Rich message dialog")); #endif // wxUSE_RICHMSGDLG #if wxUSE_COLOURDLG || wxUSE_FONTDLG || wxUSE_CHOICEDLG wxMenu *choices_menu = new wxMenu; #if wxUSE_COLOURDLG choices_menu->Append(DIALOGS_CHOOSE_COLOUR, wxT("&Choose bg colour")); choices_menu->Append(DIALOGS_GET_COLOUR, wxT("&Choose fg colour")); #endif // wxUSE_COLOURDLG #if wxUSE_FONTDLG choices_menu->Append(DIALOGS_CHOOSE_FONT, wxT("Choose &font")); #endif // wxUSE_FONTDLG #if wxUSE_CHOICEDLG choices_menu->Append(DIALOGS_SINGLE_CHOICE, wxT("&Single choice\tCtrl-C")); choices_menu->Append(DIALOGS_MULTI_CHOICE, wxT("M&ultiple choice\tCtrl-U")); #endif // wxUSE_CHOICEDLG #if wxUSE_REARRANGECTRL choices_menu->Append(DIALOGS_REARRANGE, wxT("&Rearrange dialog\tCtrl-R")); #endif // wxUSE_REARRANGECTRL #if USE_COLOURDLG_GENERIC || USE_FONTDLG_GENERIC choices_menu->AppendSeparator(); #endif // USE_COLOURDLG_GENERIC || USE_FONTDLG_GENERIC #if USE_COLOURDLG_GENERIC choices_menu->Append(DIALOGS_CHOOSE_COLOUR_GENERIC, wxT("&Choose colour (generic)")); #endif // USE_COLOURDLG_GENERIC #if USE_FONTDLG_GENERIC choices_menu->Append(DIALOGS_CHOOSE_FONT_GENERIC, wxT("Choose &font (generic)")); #endif // USE_FONTDLG_GENERIC menuDlg->Append(wxID_ANY,wxT("&Choices and selectors"),choices_menu); #endif // wxUSE_COLOURDLG || wxUSE_FONTDLG || wxUSE_CHOICEDLG #if wxUSE_TEXTDLG || wxUSE_NUMBERDLG wxMenu *entry_menu = new wxMenu; #if wxUSE_TEXTDLG entry_menu->Append(DIALOGS_LINE_ENTRY, wxT("Single line &entry\tCtrl-E")); entry_menu->Append(DIALOGS_TEXT_ENTRY, wxT("Multi line text &entry\tShift-Ctrl-E")); entry_menu->Append(DIALOGS_PASSWORD_ENTRY, wxT("&Password entry\tCtrl-P")); #endif // wxUSE_TEXTDLG #if wxUSE_NUMBERDLG entry_menu->Append(DIALOGS_NUM_ENTRY, wxT("&Numeric entry\tCtrl-N")); #endif // wxUSE_NUMBERDLG menuDlg->Append(wxID_ANY,wxT("&Entry dialogs"),entry_menu); #endif // wxUSE_TEXTDLG || wxUSE_NUMBERDLG #if wxUSE_FILEDLG wxMenu *filedlg_menu = new wxMenu; filedlg_menu->Append(DIALOGS_FILE_OPEN, wxT("&Open file\tCtrl-O")); filedlg_menu->Append(DIALOGS_FILE_OPEN2, wxT("&Second open file\tCtrl-2")); filedlg_menu->Append(DIALOGS_FILES_OPEN, wxT("Open &files\tCtrl-Q")); filedlg_menu->Append(DIALOGS_FILE_SAVE, wxT("Sa&ve file\tCtrl-S")); #if USE_FILEDLG_GENERIC filedlg_menu->AppendSeparator(); filedlg_menu->Append(DIALOGS_FILE_OPEN_GENERIC, wxT("&Open file (generic)")); filedlg_menu->Append(DIALOGS_FILES_OPEN_GENERIC, wxT("Open &files (generic)")); filedlg_menu->Append(DIALOGS_FILE_SAVE_GENERIC, wxT("Sa&ve file (generic)")); #endif // USE_FILEDLG_GENERIC menuDlg->Append(wxID_ANY,wxT("&File operations"),filedlg_menu); #endif // wxUSE_FILEDLG #if wxUSE_DIRDLG wxMenu *dir_menu = new wxMenu; dir_menu->Append(DIALOGS_DIR_CHOOSE, wxT("&Choose a directory\tCtrl-D")); dir_menu->Append(DIALOGS_DIRNEW_CHOOSE, wxT("Choose a directory (with \"Ne&w\" button)\tShift-Ctrl-D")); menuDlg->Append(wxID_ANY,wxT("&Directory operations"),dir_menu); #if USE_DIRDLG_GENERIC dir_menu->AppendSeparator(); dir_menu->Append(DIALOGS_GENERIC_DIR_CHOOSE, wxT("&Choose a directory (generic)")); #endif // USE_DIRDLG_GENERIC #endif // wxUSE_DIRDLG #if wxUSE_STARTUP_TIPS || \ wxUSE_PROGRESSDLG || \ wxUSE_BUSYINFO || \ wxUSE_LOG_DIALOG || \ wxUSE_MSGDLG wxMenu *info_menu = new wxMenu; #if wxUSE_STARTUP_TIPS info_menu->Append(DIALOGS_TIP, wxT("&Tip of the day\tCtrl-T")); #endif // wxUSE_STARTUP_TIPS #if wxUSE_PROGRESSDLG info_menu->Append(DIALOGS_PROGRESS, wxT("Pro&gress dialog\tCtrl-G")); #endif // wxUSE_PROGRESSDLG #if wxUSE_BUSYINFO info_menu->Append(DIALOGS_BUSYINFO, wxT("&Busy info dialog\tCtrl-B")); #endif // wxUSE_BUSYINFO #if wxUSE_LOG_DIALOG info_menu->Append(DIALOGS_LOG_DIALOG, wxT("&Log dialog\tCtrl-L")); #endif // wxUSE_LOG_DIALOG #if wxUSE_INFOBAR info_menu->Append(DIALOGS_INFOBAR_SIMPLE, "Simple &info bar\tCtrl-I"); info_menu->Append(DIALOGS_INFOBAR_ADVANCED, "&Advanced info bar\tShift-Ctrl-I"); #endif // wxUSE_INFOBAR #if wxUSE_MSGDLG info_menu->Append(DIALOGS_MESSAGE_BOX_WXINFO, wxT("&wxWidgets information\tCtrl-W")); #endif // wxUSE_MSGDLG menuDlg->Append(wxID_ANY,wxT("&Informative dialogs"),info_menu); #endif // wxUSE_STARTUP_TIPS || wxUSE_PROGRESSDLG || wxUSE_BUSYINFO || wxUSE_LOG_DIALOG #if wxUSE_FINDREPLDLG wxMenu *find_menu = new wxMenu; find_menu->AppendCheckItem(DIALOGS_FIND, wxT("&Find dialog\tCtrl-F")); find_menu->AppendCheckItem(DIALOGS_REPLACE, wxT("Find and &replace dialog\tShift-Ctrl-F")); menuDlg->Append(wxID_ANY,wxT("&Searching"),find_menu); #endif // wxUSE_FINDREPLDLG wxMenu *dialogs_menu = new wxMenu; #if USE_MODAL_PRESENTATION dialogs_menu->Append(DIALOGS_MODAL, wxT("&Modal dialog\tShift-Ctrl-W")); #endif // USE_MODAL_PRESENTATION dialogs_menu->AppendCheckItem(DIALOGS_MODELESS, wxT("Mode&less dialog\tShift-Ctrl-Z")); dialogs_menu->Append(DIALOGS_CENTRE_SCREEN, wxT("Centered on &screen\tShift-Ctrl-1")); dialogs_menu->Append(DIALOGS_CENTRE_PARENT, wxT("Centered on &parent\tShift-Ctrl-2")); #if wxUSE_MINIFRAME dialogs_menu->Append(DIALOGS_MINIFRAME, wxT("&Mini frame")); #endif // wxUSE_MINIFRAME dialogs_menu->Append(DIALOGS_ONTOP, wxT("Dialog staying on &top")); menuDlg->Append(wxID_ANY, wxT("&Generic dialogs"), dialogs_menu); #if USE_SETTINGS_DIALOG wxMenu *sheet_menu = new wxMenu; sheet_menu->Append(DIALOGS_PROPERTY_SHEET, wxT("&Standard property sheet\tShift-Ctrl-P")); sheet_menu->Append(DIALOGS_PROPERTY_SHEET_TOOLBOOK, wxT("&Toolbook sheet\tShift-Ctrl-T")); if (wxPlatformIs(wxPORT_MAC)) sheet_menu->Append(DIALOGS_PROPERTY_SHEET_BUTTONTOOLBOOK, wxT("Button &Toolbook sheet\tShift-Ctrl-U")); /* #ifdef __WXMAC__ sheet_menu->Append(DIALOGS_PROPERTY_SHEET_BUTTONTOOLBOOK, wxT("Button &Toolbook sheet\tShift-Ctrl-U")); #endif */ menuDlg->Append(wxID_ANY, wxT("&Property sheets"), sheet_menu); #endif // USE_SETTINGS_DIALOG wxMenu *menuNotif = new wxMenu; menuNotif->Append(DIALOGS_REQUEST, wxT("&Request user attention\tCtrl-Shift-R")); #if wxUSE_NOTIFICATION_MESSAGE menuNotif->Append(DIALOGS_NOTIFY_AUTO, "&Automatically hidden notification"); menuNotif->Append(DIALOGS_NOTIFY_SHOW, "&Show manual notification"); menuNotif->Append(DIALOGS_NOTIFY_HIDE, "&Hide manual notification"); #endif // wxUSE_NOTIFICATION_MESSAGE menuDlg->AppendSubMenu(menuNotif, "&User notifications"); #if wxUSE_RICHTOOLTIP menuDlg->Append(DIALOGS_RICHTIP_DIALOG, "Rich &tooltip dialog...\tCtrl-H"); menuDlg->AppendSeparator(); #endif // wxUSE_RICHTOOLTIP menuDlg->Append(DIALOGS_STANDARD_BUTTON_SIZER_DIALOG, wxT("&Standard Buttons Sizer Dialog")); menuDlg->Append(DIALOGS_TEST_DEFAULT_ACTION, wxT("&Test dialog default action")); menuDlg->AppendCheckItem(DIALOGS_MODAL_HOOK, "Enable modal dialog hook"); menuDlg->AppendSeparator(); menuDlg->Append(wxID_EXIT, wxT("E&xit\tAlt-X")); #if wxUSE_ABOUTDLG wxMenu *menuHelp = new wxMenu; menuHelp->Append(DIALOGS_ABOUTDLG_SIMPLE, wxT("&About (simple)...\tF1")); menuHelp->Append(DIALOGS_ABOUTDLG_FANCY, wxT("About (&fancy)...\tShift-F1")); menuHelp->Append(DIALOGS_ABOUTDLG_FULL, wxT("About (f&ull)...\tCtrl-F1")); menuHelp->Append(DIALOGS_ABOUTDLG_CUSTOM, wxT("About (&custom)...\tCtrl-Shift-F1")); #endif // wxUSE_ABOUTDLG wxMenu* editMenu = new wxMenu; editMenu->Append(wxID_UNDO, _("&Undo\tCtrl+Z")); editMenu->Append(wxID_REDO, _("&Redo\tCtrl+Y")); editMenu->AppendSeparator(); editMenu->Append(wxID_CUT, _("Cu&t\tCtrl+X")); editMenu->Append(wxID_COPY, _("&Copy\tCtrl+C")); editMenu->Append(wxID_PASTE, _("&Paste\tCtrl+V")); editMenu->Append(wxID_CLEAR, _("&Delete")); editMenu->AppendSeparator(); editMenu->Append(wxID_SELECTALL, _("Select All\tCtrl+A")); wxMenuBar *menubar = new wxMenuBar; menubar->Append(menuDlg, wxT("&Dialogs")); menubar->Append(editMenu, wxT("&Edit")); #if wxUSE_ABOUTDLG menubar->Append(menuHelp, wxT("&Help")); #endif // wxUSE_ABOUTDLG frame->SetMenuBar(menubar); frame->Centre(wxBOTH); frame->Show(true); return true; } // My frame constructor MyFrame::MyFrame(const wxString& title) : wxFrame(NULL, wxID_ANY, title) { SetIcon(wxICON(sample)); #if USE_MODAL_PRESENTATION m_dialog = (MyModelessDialog *)NULL; #endif // USE_MODAL_PRESENTATION #if wxUSE_FINDREPLDLG m_dlgFind = m_dlgReplace = NULL; #endif #if wxUSE_COLOURDLG m_clrData.SetChooseFull(true); for (int i = 0; i < wxColourData::NUM_CUSTOM; i++) { unsigned char n = i*16; m_clrData.SetCustomColour(i, wxColour(n, n, n)); } #endif // wxUSE_COLOURDLG #if wxUSE_NOTIFICATION_MESSAGE m_notifMsg = NULL; #endif // wxUSE_NOTIFICATION_MESSAGE #if wxUSE_STATUSBAR CreateStatusBar(); #endif // wxUSE_STATUSBAR m_canvas = new MyCanvas(this); #if wxUSE_INFOBAR // an info bar can be created very simply and used without any extra effort m_infoBarSimple = new wxInfoBar(this); // or it can also be customized by m_infoBarAdvanced = new wxInfoBar(this); // ... adding extra buttons (but more than two will usually be too many) m_infoBarAdvanced->AddButton(wxID_UNDO); m_infoBarAdvanced->AddButton(wxID_REDO); m_infoBarAdvanced->Connect(wxID_REDO, wxEVT_BUTTON, wxCommandEventHandler(MyFrame::OnInfoBarRedo), NULL, this); // adding and removing a button immediately doesn't make sense here, of // course, it's done just to show that it is possible m_infoBarAdvanced->AddButton(wxID_EXIT); m_infoBarAdvanced->RemoveButton(wxID_EXIT); // ... changing the colours and/or fonts m_infoBarAdvanced->SetOwnBackgroundColour(0xc8ffff); m_infoBarAdvanced->SetFont(GetFont().Bold().Larger()); // ... and changing the effect (only does anything under MSW currently) m_infoBarAdvanced->SetShowHideEffects(wxSHOW_EFFECT_EXPAND, wxSHOW_EFFECT_EXPAND); m_infoBarAdvanced->SetEffectDuration(1500); // to use the info bars we need to use sizer for the window layout wxBoxSizer * const sizer = new wxBoxSizer(wxVERTICAL); sizer->Add(m_infoBarSimple, wxSizerFlags().Expand()); sizer->Add(m_canvas, wxSizerFlags(1).Expand()); sizer->Add(m_infoBarAdvanced, wxSizerFlags().Expand()); SetSizer(sizer); // final touch: under MSW the info bars are shown progressively and parts // of the parent window can be seen during the process, so use the same // background colour for our background as for the canvas window which // covers our entire client area to avoid jarring colour jumps SetOwnBackgroundColour(m_canvas->GetBackgroundColour()); #endif // wxUSE_INFOBAR #ifdef __WXMSW__ // Test MSW-specific function allowing to access the "system" menu. wxMenu * const menu = MSWGetSystemMenu(); if ( menu ) { menu->AppendSeparator(); // The ids of the menu commands in MSW system menu must be multiple of // 16 so we can't use DIALOGS_ABOUTDLG_SIMPLE here because it might not // satisfy this condition and need to define and connect a separate id. static const int DIALOGS_SYSTEM_ABOUT = 0x4010; menu->Append(DIALOGS_SYSTEM_ABOUT, "&About"); Connect(DIALOGS_SYSTEM_ABOUT, wxEVT_MENU, wxCommandEventHandler(MyFrame::ShowSimpleAboutDialog)); } #endif // __WXMSW__ } MyFrame::~MyFrame() { #if wxUSE_NOTIFICATION_MESSAGE delete m_notifMsg; #endif // wxUSE_NOTIFICATION_MESSAGE } #if wxUSE_COLOURDLG void MyFrame::ChooseColour(wxCommandEvent& WXUNUSED(event)) { m_clrData.SetColour(m_canvas->GetBackgroundColour()); wxColourDialog dialog(this, &m_clrData); dialog.SetTitle(_("Please choose the background colour")); if ( dialog.ShowModal() == wxID_OK ) { m_clrData = dialog.GetColourData(); m_canvas->SetBackgroundColour(m_clrData.GetColour()); m_canvas->ClearBackground(); m_canvas->Refresh(); } } void MyFrame::GetColour(wxCommandEvent& WXUNUSED(event)) { wxColour clr = wxGetColourFromUser ( this, m_canvas->GetForegroundColour(), "Please choose the foreground colour" ); if ( clr.IsOk() ) { m_canvas->SetForegroundColour(clr); m_canvas->Refresh(); } //else: dialog cancelled by user } #endif // wxUSE_COLOURDLG #if USE_COLOURDLG_GENERIC void MyFrame::ChooseColourGeneric(wxCommandEvent& WXUNUSED(event)) { m_clrData.SetColour(m_canvas->GetBackgroundColour()); //FIXME:TODO:This has no effect... m_clrData.SetChooseFull(true); for (int i = 0; i < 16; i++) { wxColour colour( (unsigned char)(i*16), (unsigned char)(i*16), (unsigned char)(i*16) ); m_clrData.SetCustomColour(i, colour); } wxGenericColourDialog *dialog = new wxGenericColourDialog(this, &m_clrData); if (dialog->ShowModal() == wxID_OK) { m_clrData = dialog->GetColourData(); m_canvas->SetBackgroundColour(m_clrData.GetColour()); m_canvas->ClearBackground(); m_canvas->Refresh(); } dialog->Destroy(); } #endif // USE_COLOURDLG_GENERIC #if wxUSE_FONTDLG void MyFrame::ChooseFont(wxCommandEvent& WXUNUSED(event) ) { wxFontData data; data.SetInitialFont(m_canvas->GetFont()); data.SetColour(m_canvas->GetForegroundColour()); // you might also do this: // // wxFontDialog dialog; // if ( !dialog.Create(this, data) { ... error ... } // wxFontDialog dialog(this, data); if (dialog.ShowModal() == wxID_OK) { wxFontData retData = dialog.GetFontData(); m_canvas->SetFont(retData.GetChosenFont()); m_canvas->SetForegroundColour(retData.GetColour()); m_canvas->Refresh(); } //else: cancelled by the user, don't change the font } #endif // wxUSE_FONTDLG #if USE_FONTDLG_GENERIC void MyFrame::ChooseFontGeneric(wxCommandEvent& WXUNUSED(event) ) { wxFontData data; data.SetInitialFont(m_canvas->GetFont()); data.SetColour(m_canvas->GetForegroundColour()); wxGenericFontDialog *dialog = new wxGenericFontDialog(this, data); if (dialog->ShowModal() == wxID_OK) { wxFontData retData = dialog->GetFontData(); m_canvas->SetFont(retData.GetChosenFont()); m_canvas->SetForegroundColour(retData.GetColour()); m_canvas->Refresh(); } dialog->Destroy(); } #endif // USE_FONTDLG_GENERIC #if wxUSE_LOG_DIALOG void MyFrame::LogDialog(wxCommandEvent& WXUNUSED(event)) { // calling wxYield() (as ~wxBusyCursor does) shouldn't result in messages // being flushed -- test it { wxBusyCursor bc; wxLogMessage(wxT("This is some message - everything is ok so far.")); wxLogMessage(wxT("Another message...\n... this one is on multiple lines")); wxLogWarning(wxT("And then something went wrong!")); // and if ~wxBusyCursor doesn't do it, then call it manually wxYield(); } wxLogError(wxT("Intermediary error handler decided to abort.")); wxLogError(wxT("The top level caller detected an unrecoverable error.")); wxLog::FlushActive(); wxLogMessage(wxT("And this is the same dialog but with only one message.")); } #endif // wxUSE_LOG_DIALOG #if wxUSE_INFOBAR void MyFrame::InfoBarSimple(wxCommandEvent& WXUNUSED(event)) { static int s_count = 0; m_infoBarSimple->ShowMessage ( wxString::Format("Message #%d in the info bar.", ++s_count) ); } void MyFrame::InfoBarAdvanced(wxCommandEvent& WXUNUSED(event)) { m_infoBarAdvanced->ShowMessage("Sorry, it didn't work out.", wxICON_WARNING); } void MyFrame::OnInfoBarRedo(wxCommandEvent& WXUNUSED(event)) { m_infoBarAdvanced->ShowMessage("Still no, sorry again.", wxICON_ERROR); } #endif // wxUSE_INFOBAR #if wxUSE_MSGDLG void MyFrame::MessageBox(wxCommandEvent& WXUNUSED(event)) { wxMessageDialog dialog(this, "This is a message box\n" "This is a long, long string to test out if the message box " "is laid out properly.", "Message box text", wxCENTER | wxNO_DEFAULT | wxYES_NO | wxCANCEL | wxICON_INFORMATION); wxString extmsg; if ( dialog.SetYesNoCancelLabels ( "Answer &Yes", "Answer &No", "Refuse to answer" ) ) { extmsg = "This platform supports custom button labels,\n" "so you should see the descriptive labels below."; } else { extmsg = "Custom button labels are not supported on this platform,\n" "so the default \"Yes\"/\"No\"/\"Cancel\" buttons are used."; } dialog.SetExtendedMessage(extmsg); switch ( dialog.ShowModal() ) { case wxID_YES: wxLogStatus(wxT("You pressed \"Yes\"")); break; case wxID_NO: wxLogStatus(wxT("You pressed \"No\"")); break; case wxID_CANCEL: wxLogStatus(wxT("You pressed \"Cancel\"")); break; default: wxLogError(wxT("Unexpected wxMessageDialog return code!")); } } void MyFrame::MessageBoxWindowModal(wxCommandEvent& WXUNUSED(event)) { wxMessageDialog* dialog = new wxMessageDialog(this, "This is a message box\n" "This is a long, long string to test out if the message box " "is laid out properly.", "Message box text", wxCENTER | wxNO_DEFAULT | wxYES_NO | wxCANCEL | wxICON_INFORMATION); wxString extmsg; if ( dialog->SetYesNoCancelLabels ( "Answer &Yes", "Answer &No", "Refuse to answer" ) ) { extmsg = "This platform supports custom button labels,\n" "so you should see the descriptive labels below."; } else { extmsg = "Custom button labels are not supported on this platform,\n" "so the default \"Yes\"/\"No\"/\"Cancel\" buttons are used."; } dialog->SetExtendedMessage(extmsg); dialog->Connect( wxEVT_WINDOW_MODAL_DIALOG_CLOSED, wxWindowModalDialogEventHandler(MyFrame::MessageBoxWindowModalClosed), NULL, this ); dialog->ShowWindowModal(); } void MyFrame::MessageBoxWindowModalClosed(wxWindowModalDialogEvent& event) { wxDialog* dialog = event.GetDialog(); switch ( dialog->GetReturnCode() ) { case wxID_YES: wxLogStatus(wxT("You pressed \"Yes\"")); break; case wxID_NO: wxLogStatus(wxT("You pressed \"No\"")); break; case wxID_CANCEL: wxLogStatus(wxT("You pressed \"Cancel\"")); break; default: wxLogError(wxT("Unexpected wxMessageDialog return code!")); } delete dialog; } void MyFrame::MessageBoxDialog(wxCommandEvent& WXUNUSED(event)) { TestMessageBoxDialog dlg(this); dlg.Create(); dlg.ShowModal(); } void MyFrame::MessageBoxInfo(wxCommandEvent& WXUNUSED(event)) { ::wxInfoMessageBox(this); } #endif // wxUSE_MSGDLG #if wxUSE_RICHMSGDLG void MyFrame::RichMessageDialog(wxCommandEvent& WXUNUSED(event)) { TestRichMessageDialog dlg(this); dlg.Create(); dlg.ShowModal(); } #endif // wxUSE_RICHMSGDLG #if wxUSE_NUMBERDLG void MyFrame::NumericEntry(wxCommandEvent& WXUNUSED(event)) { long res = wxGetNumberFromUser( wxT("This is some text, actually a lot of text.\n") wxT("Even two rows of text."), wxT("Enter a number:"), wxT("Numeric input test"), 50, 0, 100, this ); wxString msg; int icon; if ( res == -1 ) { msg = wxT("Invalid number entered or dialog cancelled."); icon = wxICON_HAND; } else { msg.Printf(wxT("You've entered %lu"), res ); icon = wxICON_INFORMATION; } wxMessageBox(msg, wxT("Numeric test result"), wxOK | icon, this); } #endif // wxUSE_NUMBERDLG #if wxUSE_TEXTDLG void MyFrame::PasswordEntry(wxCommandEvent& WXUNUSED(event)) { wxString pwd = wxGetPasswordFromUser(wxT("Enter password:"), wxT("Password entry dialog"), wxEmptyString, this); if ( !pwd.empty() ) { wxMessageBox(wxString::Format(wxT("Your password is '%s'"), pwd.c_str()), wxT("Got password"), wxOK | wxICON_INFORMATION, this); } } void MyFrame::LineEntry(wxCommandEvent& WXUNUSED(event)) { wxTextEntryDialog dialog(this, wxT("This is a small sample\n") wxT("A long, long string to test out the text entrybox"), wxT("Please enter a string"), wxT("Default value"), wxOK | wxCANCEL); if (dialog.ShowModal() == wxID_OK) { wxMessageBox(dialog.GetValue(), wxT("Got string"), wxOK | wxICON_INFORMATION, this); } } void MyFrame::TextEntry(wxCommandEvent& WXUNUSED(event)) { wxTextEntryDialog dialog(this, "You can enter a multiline string here.", "Please enter some text", "First line\nSecond one\nAnd another one too", wxOK | wxCANCEL | wxTE_MULTILINE); if (dialog.ShowModal() == wxID_OK) { wxMessageBox(dialog.GetValue(), wxT("Got text"), wxOK | wxICON_INFORMATION, this); } } #endif // wxUSE_TEXTDLG #if wxUSE_CHOICEDLG void MyFrame::SingleChoice(wxCommandEvent& WXUNUSED(event) ) { const wxString choices[] = { wxT("One"), wxT("Two"), wxT("Three"), wxT("Four"), wxT("Five") } ; wxSingleChoiceDialog dialog(this, wxT("This is a small sample\n") wxT("A single-choice convenience dialog"), wxT("Please select a value"), WXSIZEOF(choices), choices); dialog.SetSelection(2); if (dialog.ShowModal() == wxID_OK) { wxMessageDialog dialog2(this, dialog.GetStringSelection(), wxT("Got string")); dialog2.ShowModal(); } } void MyFrame::MultiChoice(wxCommandEvent& WXUNUSED(event) ) { const wxString choices[] = { wxT("One"), wxT("Two"), wxT("Three"), wxT("Four"), wxT("Five"), wxT("Six"), wxT("Seven"), wxT("Eight"), wxT("Nine"), wxT("Ten"), wxT("Eleven"), wxT("Twelve"), wxT("Seventeen"), }; wxArrayInt selections; const int count = wxGetSelectedChoices(selections, wxT("This is a small sample\n") wxT("A multi-choice convenience dialog"), wxT("Please select a value"), WXSIZEOF(choices), choices, this); if ( count >= 0 ) { wxString msg; if ( count == 0 ) { msg = wxT("You did not select any items"); } else { msg.Printf(wxT("You selected %u items:\n"), (unsigned)count); for ( int n = 0; n < count; n++ ) { msg += wxString::Format(wxT("\t%u: %u (%s)\n"), (unsigned)n, (unsigned)selections[n], choices[selections[n]].c_str()); } } wxLogMessage(msg); } //else: cancelled } #endif // wxUSE_CHOICEDLG #if wxUSE_REARRANGECTRL // custom rearrange dialog: it adds the possibility to rename an item to the // base class functionality class MyRearrangeDialog : public wxRearrangeDialog { public: MyRearrangeDialog(wxWindow *parent, wxArrayInt& order, wxArrayString& labels, wxArrayString& labelsOrig) : wxRearrangeDialog ( parent, "Configure the columns shown:", "wxRearrangeDialog example", order, labels ), m_order(order), m_labels(labels), m_labelsOrig(labelsOrig) { m_sel = wxNOT_FOUND; wxPanel * const panel = new wxPanel(this); wxSizer * const sizer = new wxBoxSizer(wxHORIZONTAL); m_labelOrig = new wxStaticText(panel, wxID_ANY, ""); sizer->Add(m_labelOrig, wxSizerFlags().Centre().Border(wxRIGHT)); m_text = new wxTextCtrl(panel, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER); sizer->Add(m_text, wxSizerFlags().Centre().Border(wxRIGHT)); sizer->Add(new wxButton(panel, wxID_APPLY, "&Rename"), wxSizerFlags().Centre()); panel->SetSizer(sizer); // call this first to ensure that the controls have a reasonable best // size before they're added DoUpdateExtraControls(GetList()->GetSelection()); AddExtraControls(panel); // another customization not directly supported by the dialog: add a // custom button wxWindow * const btnOk = FindWindow(wxID_OK); wxCHECK_RET( btnOk, "no Ok button?" ); wxSizer * const sizerBtns = btnOk->GetContainingSizer(); wxCHECK_RET( sizerBtns, "no buttons sizer?" ); sizerBtns->Add(new wxButton(this, wxID_RESET, "&Reset all"), wxSizerFlags().Border(wxLEFT)); } // call this instead of ShowModal() to update order and labels array in // case the dialog was not cancelled bool Rearrange() { switch ( ShowModal() ) { case wxID_CANCEL: return false; case wxID_OK: m_order = GetOrder(); break; case wxID_RESET: // order already reset break; } return true; } private: void OnSelChange(wxCommandEvent& event) { DoUpdateExtraControls(event.GetInt()); } void OnUpdateUIRename(wxUpdateUIEvent& event) { event.Enable( CanRename() ); } void OnRename(wxCommandEvent& WXUNUSED(event)) { if ( !CanRename() ) return; m_labels[m_sel] = m_text->GetValue(); GetList()->SetString(m_sel, m_labels[m_sel]); } void OnReset(wxCommandEvent& WXUNUSED(event)) { // in a real program we should probably ask if the user really wants to // do this but here we just go ahead and reset all columns labels and // their order without confirmation const unsigned count = m_order.size(); for ( unsigned n = 0; n < count; n++ ) { m_order[n] = n; m_labels[n] = m_labelsOrig[n]; } EndModal(wxID_RESET); } bool CanRename() const { // only allow renaming if the user modified the currently selected item // text (which presupposes that we do have a current item) return m_sel != wxNOT_FOUND && m_text->GetValue() != m_labels[m_sel]; } void DoUpdateExtraControls(int sel) { m_sel = sel; if ( m_sel == wxNOT_FOUND ) { m_labelOrig->SetLabel(""); m_text->Clear(); m_text->Disable(); } else // have valid item { m_labelOrig->SetLabelText(m_labelsOrig[m_sel]); m_text->Enable(); m_text->SetValue(m_labels[m_sel]); } } wxArrayInt& m_order; wxArrayString& m_labels, m_labelsOrig; int m_sel; wxStaticText *m_labelOrig; wxTextCtrl *m_text; DECLARE_EVENT_TABLE() wxDECLARE_NO_COPY_CLASS(MyRearrangeDialog); }; BEGIN_EVENT_TABLE(MyRearrangeDialog, wxRearrangeDialog) EVT_LISTBOX(wxID_ANY, MyRearrangeDialog::OnSelChange) EVT_UPDATE_UI(wxID_APPLY, MyRearrangeDialog::OnUpdateUIRename) EVT_TEXT_ENTER(wxID_ANY, MyRearrangeDialog::OnRename) EVT_BUTTON(wxID_APPLY, MyRearrangeDialog::OnRename) EVT_BUTTON(wxID_RESET, MyRearrangeDialog::OnReset) END_EVENT_TABLE() void MyFrame::Rearrange(wxCommandEvent& WXUNUSED(event)) { // the arrays are static so that we preserve the items order between calls // to this function static wxArrayInt s_order; static wxArrayString s_labels, s_labelsOrig; // initialize them on the first call if ( s_labelsOrig.empty() ) { static const struct ItemInfo { const char *label; const char *labelOrig; int order; } items[] = { { "File name", "Name", 0 }, { "File type", "Ext", 1 }, { "Size", "Size", 2 }, { "Creation time", "Ctime", ~3 }, // negated so hidden { "Last accessed", "Atime", ~4 }, { "Last modified", "Mtime", 5 }, }; s_order.reserve(WXSIZEOF(items)); s_labels.reserve(WXSIZEOF(items)); s_labelsOrig.reserve(WXSIZEOF(items)); for ( unsigned n = 0; n < WXSIZEOF(items); n++ ) { const ItemInfo& item = items[n]; s_order.push_back(item.order); s_labels.push_back(item.label); s_labelsOrig.push_back(item.labelOrig); } } MyRearrangeDialog dlg(this, s_order, s_labels, s_labelsOrig); if ( !dlg.Rearrange() ) return; wxString columns; for ( unsigned n = 0; n < s_order.size(); n++ ) { columns += wxString::Format("\n %u: ", n); int idx = s_order[n]; if ( idx < 0 ) { columns += "[hidden] "; idx = ~idx; } columns += s_labels[idx]; if ( s_labels[idx] != s_labelsOrig[idx] ) { columns += wxString::Format(" (original label: \"%s\")", s_labelsOrig[idx]); } } wxLogMessage("The columns order now is:%s", columns); } #endif // wxUSE_REARRANGECTRL #if wxUSE_FILEDLG // panel with custom controls for file dialog class MyExtraPanel : public wxPanel { public: MyExtraPanel(wxWindow *parent); wxString GetInfo() const { return wxString::Format("checkbox value = %d", (int) m_cb->GetValue()); } private: void OnCheckBox(wxCommandEvent& event) { m_btn->Enable(event.IsChecked()); } void OnUpdateLabelUI(wxUpdateUIEvent& event) { wxFileDialog* const dialog = wxStaticCast(GetParent(), wxFileDialog); const wxString fn = dialog->GetCurrentlySelectedFilename(); wxString msg; if ( fn.empty() ) msg = "Nothing"; else if ( wxFileName::FileExists(fn) ) msg = "File"; else if ( wxFileName::DirExists(fn) ) msg = "Directory"; else msg = "Something else"; event.SetText(msg + " selected"); } wxButton *m_btn; wxCheckBox *m_cb; wxStaticText *m_label; }; MyExtraPanel::MyExtraPanel(wxWindow *parent) : wxPanel(parent) { m_btn = new wxButton(this, -1, wxT("Custom Button")); m_btn->Enable(false); m_cb = new wxCheckBox(this, -1, wxT("Enable Custom Button")); m_cb->Connect(wxEVT_CHECKBOX, wxCommandEventHandler(MyExtraPanel::OnCheckBox), NULL, this); m_label = new wxStaticText(this, wxID_ANY, "Nothing selected"); m_label->Connect(wxEVT_UPDATE_UI, wxUpdateUIEventHandler(MyExtraPanel::OnUpdateLabelUI), NULL, this); wxBoxSizer *sizerTop = new wxBoxSizer(wxHORIZONTAL); sizerTop->Add(m_cb, wxSizerFlags().Centre().Border()); sizerTop->AddStretchSpacer(); sizerTop->Add(m_btn, wxSizerFlags().Centre().Border()); sizerTop->AddStretchSpacer(); sizerTop->Add(m_label, wxSizerFlags().Centre().Border()); SetSizerAndFit(sizerTop); } // a static method can be used instead of a function with most of compilers static wxWindow* createMyExtraPanel(wxWindow *parent) { return new MyExtraPanel(parent); } void MyFrame::FileOpen(wxCommandEvent& WXUNUSED(event) ) { wxFileDialog dialog ( this, wxT("Testing open file dialog"), wxEmptyString, wxEmptyString, #ifdef __WXMOTIF__ wxT("C++ files (*.cpp)|*.cpp") #else wxT("C++ files (*.cpp;*.h)|*.cpp;*.h") #endif ); dialog.SetExtraControlCreator(&createMyExtraPanel); dialog.CentreOnParent(); dialog.SetDirectory(wxGetHomeDir()); if (dialog.ShowModal() == wxID_OK) { wxString info; wxWindow * const extra = dialog.GetExtraControl(); info.Printf(wxT("Full file name: %s\n") wxT("Path: %s\n") wxT("Name: %s\n") wxT("Custom window: %s"), dialog.GetPath().c_str(), dialog.GetDirectory().c_str(), dialog.GetFilename().c_str(), extra ? static_cast(extra)->GetInfo() : wxString("None")); wxMessageDialog dialog2(this, info, wxT("Selected file")); dialog2.ShowModal(); } } // this shows how to take advantage of specifying a default extension in the // call to wxFileSelector: it is remembered after each new call and the next // one will use it by default void MyFrame::FileOpen2(wxCommandEvent& WXUNUSED(event) ) { static wxString s_extDef; wxString path = wxFileSelector( wxT("Select the file to load"), wxEmptyString, wxEmptyString, s_extDef, wxString::Format ( wxT("Waveform (*.wav)|*.wav|Plain text (*.txt)|*.txt|All files (%s)|%s"), wxFileSelectorDefaultWildcardStr, wxFileSelectorDefaultWildcardStr ), wxFD_OPEN|wxFD_CHANGE_DIR|wxFD_PREVIEW, this ); if ( !path ) return; // it is just a sample, would use wxSplitPath in real program s_extDef = path.AfterLast(wxT('.')); wxLogMessage(wxT("You selected the file '%s', remembered extension '%s'"), path, s_extDef); } void MyFrame::FilesOpen(wxCommandEvent& WXUNUSED(event) ) { wxString wildcards = #ifdef __WXMOTIF__ wxT("C++ files (*.cpp)|*.cpp"); #else wxString::Format ( wxT("All files (%s)|%s|C++ files (*.cpp;*.h)|*.cpp;*.h"), wxFileSelectorDefaultWildcardStr, wxFileSelectorDefaultWildcardStr ); #endif wxFileDialog dialog(this, wxT("Testing open multiple file dialog"), wxEmptyString, wxEmptyString, wildcards, wxFD_OPEN|wxFD_MULTIPLE); if (dialog.ShowModal() == wxID_OK) { wxArrayString paths, filenames; dialog.GetPaths(paths); dialog.GetFilenames(filenames); wxString msg, s; size_t count = paths.GetCount(); for ( size_t n = 0; n < count; n++ ) { s.Printf(wxT("File %d: %s (%s)\n"), (int)n, paths[n].c_str(), filenames[n].c_str()); msg += s; } s.Printf(wxT("Filter index: %d"), dialog.GetFilterIndex()); msg += s; wxMessageDialog dialog2(this, msg, wxT("Selected files")); dialog2.ShowModal(); } } void MyFrame::FileSave(wxCommandEvent& WXUNUSED(event) ) { wxFileDialog dialog(this, wxT("Testing save file dialog"), wxEmptyString, wxT("myletter.doc"), wxT("Text files (*.txt)|*.txt|Document files (*.doc;*.ods)|*.doc;*.ods"), wxFD_SAVE|wxFD_OVERWRITE_PROMPT); dialog.SetFilterIndex(1); if (dialog.ShowModal() == wxID_OK) { wxLogMessage(wxT("%s, filter %d"), dialog.GetPath().c_str(), dialog.GetFilterIndex()); } } #endif // wxUSE_FILEDLG #if USE_FILEDLG_GENERIC void MyFrame::FileOpenGeneric(wxCommandEvent& WXUNUSED(event) ) { wxGenericFileDialog dialog ( this, wxT("Testing open file dialog"), wxEmptyString, wxEmptyString, wxT("C++ files (*.cpp;*.h)|*.cpp;*.h") ); dialog.SetExtraControlCreator(&createMyExtraPanel); dialog.SetDirectory(wxGetHomeDir()); if (dialog.ShowModal() == wxID_OK) { wxString info; info.Printf(wxT("Full file name: %s\n") wxT("Path: %s\n") wxT("Name: %s"), dialog.GetPath().c_str(), dialog.GetDirectory().c_str(), dialog.GetFilename().c_str()); wxMessageDialog dialog2(this, info, wxT("Selected file")); dialog2.ShowModal(); } } void MyFrame::FilesOpenGeneric(wxCommandEvent& WXUNUSED(event) ) { // On PocketPC you can disable OK-only dialogs policy using system option int buttons = wxSystemOptions::GetOptionInt(wxT("wince.dialog.real-ok-cancel")); wxSystemOptions::SetOption(wxT("wince.dialog.real-ok-cancel"), 1); wxString wildcards = wxT("All files (*.*)|*.*|C++ files (*.cpp;*.h)|*.cpp;*.h"); wxGenericFileDialog dialog(this, wxT("Testing open multiple file dialog"), wxEmptyString, wxEmptyString, wildcards, wxFD_MULTIPLE); if (dialog.ShowModal() == wxID_OK) { wxArrayString paths, filenames; dialog.GetPaths(paths); dialog.GetFilenames(filenames); wxString msg, s; size_t count = paths.GetCount(); for ( size_t n = 0; n < count; n++ ) { s.Printf(wxT("File %d: %s (%s)\n"), (int)n, paths[n].c_str(), filenames[n].c_str()); msg += s; } s.Printf(wxT("Filter index: %d"), dialog.GetFilterIndex()); msg += s; wxMessageDialog dialog2(this, msg, wxT("Selected files")); dialog2.ShowModal(); } // restore system option wxSystemOptions::SetOption(wxT("wince.dialog.real-ok-cancel"), buttons); } void MyFrame::FileSaveGeneric(wxCommandEvent& WXUNUSED(event) ) { wxGenericFileDialog dialog(this, wxT("Testing save file dialog"), wxEmptyString, wxT("myletter.doc"), wxT("Text files (*.txt)|*.txt|Document files (*.doc;*.ods)|*.doc;*.ods"), wxFD_SAVE|wxFD_OVERWRITE_PROMPT); dialog.SetFilterIndex(1); if (dialog.ShowModal() == wxID_OK) { wxLogMessage(wxT("%s, filter %d"), dialog.GetPath().c_str(), dialog.GetFilterIndex()); } } #endif // USE_FILEDLG_GENERIC #if wxUSE_DIRDLG void MyFrame::DoDirChoose(int style) { // pass some initial dir to wxDirDialog wxString dirHome; wxGetHomeDir(&dirHome); wxDirDialog dialog(this, wxT("Testing directory picker"), dirHome, style); if (dialog.ShowModal() == wxID_OK) { wxLogMessage(wxT("Selected path: %s"), dialog.GetPath().c_str()); } } void MyFrame::DirChoose(wxCommandEvent& WXUNUSED(event) ) { DoDirChoose(wxDD_DEFAULT_STYLE | wxDD_DIR_MUST_EXIST); } void MyFrame::DirChooseNew(wxCommandEvent& WXUNUSED(event) ) { DoDirChoose(wxDD_DEFAULT_STYLE & ~wxDD_DIR_MUST_EXIST); } #endif // wxUSE_DIRDLG #if USE_DIRDLG_GENERIC void MyFrame::GenericDirChoose(wxCommandEvent& WXUNUSED(event) ) { // pass some initial dir to wxDirDialog wxString dirHome; wxGetHomeDir(&dirHome); wxGenericDirDialog dialog(this, wxT("Testing generic directory picker"), dirHome); if (dialog.ShowModal() == wxID_OK) { wxMessageDialog dialog2(this, dialog.GetPath(), wxT("Selected path")); dialog2.ShowModal(); } } #endif // USE_DIRDLG_GENERIC #if USE_MODAL_PRESENTATION void MyFrame::ModalDlg(wxCommandEvent& WXUNUSED(event)) { MyModalDialog dlg(this); dlg.ShowModal(); } #endif // USE_MODAL_PRESENTATION void MyFrame::ModelessDlg(wxCommandEvent& event) { bool show = GetMenuBar()->IsChecked(event.GetId()); if ( show ) { if ( !m_dialog ) { m_dialog = new MyModelessDialog(this); } m_dialog->Show(true); } else // hide { // If m_dialog is NULL, then possibly the system // didn't report the checked menu item status correctly. // It should be true just after the menu item was selected, // if there was no modeless dialog yet. wxASSERT( m_dialog != NULL ); if (m_dialog) m_dialog->Hide(); } } void MyFrame::DlgCenteredScreen(wxCommandEvent& WXUNUSED(event)) { wxDialog dlg(this, wxID_ANY, wxT("Dialog centered on screen"), wxDefaultPosition, wxSize(200, 100)); (new wxButton(&dlg, wxID_OK, wxT("Close")))->Centre(); dlg.CentreOnScreen(); dlg.ShowModal(); } void MyFrame::DlgCenteredParent(wxCommandEvent& WXUNUSED(event)) { wxDialog dlg(this, wxID_ANY, wxT("Dialog centered on parent"), wxDefaultPosition, wxSize(200, 100)); (new wxButton(&dlg, wxID_OK, wxT("Close")))->Centre(); dlg.CentreOnParent(); dlg.ShowModal(); } #if wxUSE_MINIFRAME void MyFrame::MiniFrame(wxCommandEvent& WXUNUSED(event)) { wxFrame *frame = new wxMiniFrame(this, wxID_ANY, wxT("Mini frame"), wxDefaultPosition, wxSize(300, 100), wxCAPTION | wxCLOSE_BOX); new wxStaticText(frame, wxID_ANY, wxT("Mini frames have slightly different appearance"), wxPoint(5, 5)); new wxStaticText(frame, wxID_ANY, wxT("from the normal frames but that's the only difference."), wxPoint(5, 25)); frame->CentreOnParent(); frame->Show(); } #endif // wxUSE_MINIFRAME void MyFrame::DlgOnTop(wxCommandEvent& WXUNUSED(event)) { wxDialog dlg(this, wxID_ANY, wxT("Dialog staying on top of other windows"), wxDefaultPosition, wxSize(300, 100), wxDEFAULT_DIALOG_STYLE | wxSTAY_ON_TOP); (new wxButton(&dlg, wxID_OK, wxT("Close")))->Centre(); dlg.ShowModal(); } #if wxUSE_STARTUP_TIPS void MyFrame::ShowTip(wxCommandEvent& WXUNUSED(event)) { static size_t s_index = (size_t)-1; if ( s_index == (size_t)-1 ) { srand(time(NULL)); // this is completely bogus, we don't know how many lines are there // in the file, but who cares, it's a demo only... s_index = rand() % 5; } wxTipProvider *tipProvider = wxCreateFileTipProvider(wxT("tips.txt"), s_index); bool showAtStartup = wxShowTip(this, tipProvider); if ( showAtStartup ) { wxMessageBox(wxT("Will show tips on startup"), wxT("Tips dialog"), wxOK | wxICON_INFORMATION, this); } s_index = tipProvider->GetCurrentTip(); delete tipProvider; } #endif // wxUSE_STARTUP_TIPS #if USE_SETTINGS_DIALOG void MyFrame::OnPropertySheet(wxCommandEvent& event) { SettingsDialog dialog(this, event.GetId()); dialog.ShowModal(); } #endif // USE_SETTINGS_DIALOG void MyFrame::OnRequestUserAttention(wxCommandEvent& WXUNUSED(event)) { wxLogStatus(wxT("Sleeping for 3 seconds to allow you to switch to another window")); wxSleep(3); RequestUserAttention(wxUSER_ATTENTION_ERROR); } #if wxUSE_NOTIFICATION_MESSAGE void MyFrame::OnNotifMsgAuto(wxCommandEvent& WXUNUSED(event)) { // Notice that the notification remains shown even after the // wxNotificationMessage object itself is destroyed so we can show simple // notifications using temporary objects. if ( !wxNotificationMessage ( "Automatic Notification", "Nothing important has happened\n" "this notification will disappear soon." ).Show() ) { wxLogStatus("Failed to show notification message"); } // But it doesn't have to be a temporary, of course. wxNotificationMessage n("Dummy Warning", "Example of a warning notification."); n.SetFlags(wxICON_ERROR); n.Show(5); // Just for testing, use 5 second delay. } void MyFrame::OnNotifMsgShow(wxCommandEvent& WXUNUSED(event)) { if ( !m_notifMsg ) { m_notifMsg = new wxNotificationMessage ( "wxWidgets Manual Notification", "You can hide this notification from the menu", this ); } if ( !m_notifMsg->Show(wxNotificationMessage::Timeout_Never) ) { wxLogStatus("Failed to show manual notification message"); } } void MyFrame::OnNotifMsgHide(wxCommandEvent& WXUNUSED(event)) { if ( m_notifMsg && !m_notifMsg->Close() ) { wxLogStatus("Failed to hide manual notification message"); } } #endif // wxUSE_NOTIFICATION_MESSAGE #if wxUSE_RICHTOOLTIP #include "wx/richtooltip.h" #include "tip.xpm" class RichTipDialog : public wxDialog { public: RichTipDialog(wxWindow* parent) : wxDialog(parent, wxID_ANY, "wxRichToolTip Test", wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER) { // Create the controls. m_textTitle = new wxTextCtrl(this, wxID_ANY, "Tooltip title"); m_textBody = new wxTextCtrl(this, wxID_ANY, "Main tooltip text\n" "possibly on several\n" "lines.", wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE); wxButton* btnShowText = new wxButton(this, wxID_ANY, "Show for &text"); wxButton* btnShowBtn = new wxButton(this, wxID_ANY, "Show for &button"); const wxString icons[] = { "&None", "&Information", "&Warning", "&Error", "&Custom" }; wxCOMPILE_TIME_ASSERT( WXSIZEOF(icons) == Icon_Max, IconMismatch ); m_icons = new wxRadioBox(this, wxID_ANY, "&Icon choice:", wxDefaultPosition, wxDefaultSize, WXSIZEOF(icons), icons, 1, wxRA_SPECIFY_ROWS); m_icons->SetSelection(Icon_Info); const wxString tipKinds[] = { "&None", "Top left", "Top", "Top right", "Bottom left", "Bottom", "Bottom right", "&Auto" }; m_tipKinds = new wxRadioBox(this, wxID_ANY, "Tip &kind:", wxDefaultPosition, wxDefaultSize, WXSIZEOF(tipKinds), tipKinds, 4, wxRA_SPECIFY_COLS); m_tipKinds->SetSelection(wxTipKind_Auto); const wxString bgStyles[] = { "&Default", "&Solid", "&Gradient", }; wxCOMPILE_TIME_ASSERT( WXSIZEOF(bgStyles) == Bg_Max, BgMismatch ); m_bgStyles = new wxRadioBox(this, wxID_ANY, "Background style:", wxDefaultPosition, wxDefaultSize, WXSIZEOF(bgStyles), bgStyles, 1, wxRA_SPECIFY_ROWS); const wxString timeouts[] = { "&None", "&Default (no delay)", "&3 seconds" }; wxCOMPILE_TIME_ASSERT( WXSIZEOF(timeouts) == Timeout_Max, TmMismatch ); m_timeouts = new wxRadioBox(this, wxID_ANY, "Timeout:", wxDefaultPosition, wxDefaultSize, WXSIZEOF(timeouts), timeouts, 1, wxRA_SPECIFY_ROWS); m_timeouts->SetSelection(Timeout_Default); m_timeDelay = new wxCheckBox(this, wxID_ANY, "Delay show" ); // Lay them out. m_textBody->SetMinSize(wxSize(300, 200)); wxBoxSizer* const sizer = new wxBoxSizer(wxVERTICAL); sizer->Add(m_textTitle, wxSizerFlags().Expand().Border()); sizer->Add(m_textBody, wxSizerFlags(1).Expand().Border()); sizer->Add(m_icons, wxSizerFlags().Expand().Border()); sizer->Add(m_tipKinds, wxSizerFlags().Centre().Border()); sizer->Add(m_bgStyles, wxSizerFlags().Centre().Border()); sizer->Add(m_timeouts, wxSizerFlags().Centre().Border()); sizer->Add(m_timeDelay, wxSizerFlags().Centre().Border()); wxBoxSizer* const sizerBtns = new wxBoxSizer(wxHORIZONTAL); sizerBtns->Add(btnShowText, wxSizerFlags().Border(wxRIGHT)); sizerBtns->Add(btnShowBtn, wxSizerFlags().Border(wxLEFT)); sizer->Add(sizerBtns, wxSizerFlags().Centre().Border()); sizer->Add(CreateStdDialogButtonSizer(wxOK), wxSizerFlags().Expand().Border()); SetSizerAndFit(sizer); // And connect the event handlers. btnShowText->Connect ( wxEVT_BUTTON, wxCommandEventHandler(RichTipDialog::OnShowTipForText), NULL, this ); btnShowBtn->Connect ( wxEVT_BUTTON, wxCommandEventHandler(RichTipDialog::OnShowTipForBtn), NULL, this ); } private: enum { Icon_None, Icon_Info, Icon_Warning, Icon_Error, Icon_Custom, Icon_Max }; enum { Bg_Default, Bg_Solid, Bg_Gradient, Bg_Max }; enum { Timeout_None, Timeout_Default, Timeout_3sec, Timeout_Max }; void OnShowTipForText(wxCommandEvent& WXUNUSED(event)) { DoShowTip(m_textTitle); } void OnShowTipForBtn(wxCommandEvent& WXUNUSED(event)) { DoShowTip(FindWindow(wxID_OK)); } void DoShowTip(wxWindow* win) { wxRichToolTip tip(m_textTitle->GetValue(), m_textBody->GetValue()); const int iconSel = m_icons->GetSelection(); if ( iconSel == Icon_Custom ) { tip.SetIcon(tip_xpm); } else // Use a standard icon. { static const int stdIcons[] = { wxICON_NONE, wxICON_INFORMATION, wxICON_WARNING, wxICON_ERROR, }; tip.SetIcon(stdIcons[iconSel]); } switch ( m_bgStyles->GetSelection() ) { case Bg_Default: break; case Bg_Solid: tip.SetBackgroundColour(*wxLIGHT_GREY); break; case Bg_Gradient: tip.SetBackgroundColour(*wxWHITE, wxColour(0xe4, 0xe5, 0xf0)); break; } int delay = m_timeDelay->IsChecked() ? 500 : 0; switch ( m_timeouts->GetSelection() ) { case Timeout_None: // Don't call SetTimeout unnecessarily // or msw will show generic impl if ( delay ) tip.SetTimeout(0, delay); break; case Timeout_Default: break; case Timeout_3sec: tip.SetTimeout(3000, delay); break; } tip.SetTipKind(static_cast(m_tipKinds->GetSelection())); tip.ShowFor(win); } wxTextCtrl* m_textTitle; wxTextCtrl* m_textBody; wxRadioBox* m_icons; wxRadioBox* m_tipKinds; wxRadioBox* m_bgStyles; wxRadioBox* m_timeouts; wxCheckBox* m_timeDelay; }; void MyFrame::OnRichTipDialog(wxCommandEvent& WXUNUSED(event)) { RichTipDialog dialog(this); dialog.ShowModal(); } #endif // wxUSE_RICHTOOLTIP void MyFrame::OnStandardButtonsSizerDialog(wxCommandEvent& WXUNUSED(event)) { StdButtonSizerDialog dialog(this); dialog.ShowModal(); } // TestDefaultAction #define ID_CATCH_LISTBOX_DCLICK 100 #define ID_LISTBOX 101 #define ID_DISABLE_OK 102 #define ID_DISABLE_CANCEL 103 BEGIN_EVENT_TABLE(TestDefaultActionDialog, wxDialog) EVT_CHECKBOX(ID_CATCH_LISTBOX_DCLICK, TestDefaultActionDialog::OnCatchListBoxDClick) EVT_CHECKBOX(ID_DISABLE_OK, TestDefaultActionDialog::OnDisableOK) EVT_CHECKBOX(ID_DISABLE_CANCEL, TestDefaultActionDialog::OnDisableCancel) EVT_LISTBOX_DCLICK(ID_LISTBOX, TestDefaultActionDialog::OnListBoxDClick) EVT_TEXT_ENTER(wxID_ANY, TestDefaultActionDialog::OnTextEnter) END_EVENT_TABLE() TestDefaultActionDialog::TestDefaultActionDialog( wxWindow *parent ) : wxDialog( parent, -1, "Test default action" ) { m_catchListBoxDClick = false; wxBoxSizer *main_sizer = new wxBoxSizer( wxVERTICAL ); wxFlexGridSizer *grid_sizer = new wxFlexGridSizer( 2, 5, 5 ); #if wxUSE_LISTBOX wxListBox *listbox = new wxListBox( this, ID_LISTBOX ); listbox->Append( "String 1" ); listbox->Append( "String 2" ); listbox->Append( "String 3" ); listbox->Append( "String 4" ); grid_sizer->Add( listbox ); #endif // wxUSE_LISTBOX grid_sizer->Add( new wxCheckBox( this, ID_CATCH_LISTBOX_DCLICK, "Catch DoubleClick from wxListBox" ), 0, wxALIGN_CENTRE_VERTICAL ); grid_sizer->Add( new wxTextCtrl( this, -1, "", wxDefaultPosition, wxSize(80,-1), 0 ), 0, wxALIGN_CENTRE_VERTICAL ); grid_sizer->Add( new wxStaticText( this, -1, "wxTextCtrl without wxTE_PROCESS_ENTER" ), 0, wxALIGN_CENTRE_VERTICAL ); grid_sizer->Add( new wxTextCtrl( this, -1, "", wxDefaultPosition, wxSize(80,-1), wxTE_PROCESS_ENTER ), 0, wxALIGN_CENTRE_VERTICAL ); grid_sizer->Add( new wxStaticText( this, -1, "wxTextCtrl with wxTE_PROCESS_ENTER" ), 0, wxALIGN_CENTRE_VERTICAL ); grid_sizer->Add( new wxCheckBox(this, ID_DISABLE_OK, "Disable \"OK\""), 0, wxALIGN_CENTRE_VERTICAL ); grid_sizer->Add( new wxCheckBox(this, ID_DISABLE_CANCEL, "Disable \"Cancel\""), 0, wxALIGN_CENTRE_VERTICAL ); main_sizer->Add( grid_sizer, 0, wxALL, 10 ); wxSizer *button_sizer = CreateSeparatedButtonSizer( wxOK|wxCANCEL ); if (button_sizer) main_sizer->Add( button_sizer, 0, wxALL|wxGROW, 5 ); SetSizerAndFit( main_sizer ); } void TestDefaultActionDialog::OnDisableOK(wxCommandEvent& event) { FindWindow(wxID_OK)->Enable(!event.IsChecked()); } void TestDefaultActionDialog::OnDisableCancel(wxCommandEvent& event) { FindWindow(wxID_CANCEL)->Enable(!event.IsChecked()); } void TestDefaultActionDialog::OnListBoxDClick(wxCommandEvent& event) { event.Skip( !m_catchListBoxDClick ); } void TestDefaultActionDialog::OnCatchListBoxDClick(wxCommandEvent& WXUNUSED(event)) { m_catchListBoxDClick = !m_catchListBoxDClick; } void TestDefaultActionDialog::OnTextEnter(wxCommandEvent& event) { wxLogMessage("Text \"%s\" entered.", event.GetString()); } void MyFrame::OnTestDefaultActionDialog(wxCommandEvent& WXUNUSED(event)) { TestDefaultActionDialog dialog( this ); dialog.ShowModal(); } void MyFrame::OnModalHook(wxCommandEvent& event) { class TestModalHook : public wxModalDialogHook { protected: virtual int Enter(wxDialog* dialog) { wxLogStatus("Showing %s modal dialog", dialog->GetClassInfo()->GetClassName()); return wxID_NONE; } virtual void Exit(wxDialog* dialog) { wxLogStatus("Leaving %s modal dialog", dialog->GetClassInfo()->GetClassName()); } }; static TestModalHook s_hook; if ( event.IsChecked() ) s_hook.Register(); else s_hook.Unregister(); } void MyFrame::OnExit(wxCommandEvent& WXUNUSED(event) ) { Close(true); } #if wxUSE_PROGRESSDLG void MyFrame::ShowProgress( wxCommandEvent& WXUNUSED(event) ) { static const int max = 100; wxProgressDialog dialog("Progress dialog example", // "Reserve" enough space for the multiline // messages below, we'll change it anyhow // immediately in the loop below wxString(' ', 100) + "\n\n\n\n", max, // range this, // parent wxPD_CAN_ABORT | wxPD_CAN_SKIP | wxPD_APP_MODAL | //wxPD_AUTO_HIDE | // -- try this as well wxPD_ELAPSED_TIME | wxPD_ESTIMATED_TIME | wxPD_REMAINING_TIME | wxPD_SMOOTH // - makes indeterminate mode bar on WinXP very small ); bool cont = true; for ( int i = 0; i <= max; i++ ) { wxString msg; // test both modes of wxProgressDialog behaviour: start in // indeterminate mode but switch to the determinate one later const bool determinate = i > max/2; if ( i == max ) { msg = "That's all, folks!\n" "\n" "Nothing to see here any more."; } else if ( !determinate ) { msg = "Testing indeterminate mode\n" "\n" "This mode allows you to show to the user\n" "that something is going on even if you don't know\n" "when exactly will you finish."; } else if ( determinate ) { msg = "Now in standard determinate mode\n" "\n" "This is the standard usage mode in which you\n" "update the dialog after performing each new step of work.\n" "It requires knowing the total number of steps in advance."; } // will be set to true if "Skip" button was pressed bool skip = false; if ( determinate ) { cont = dialog.Update(i, msg, &skip); } else { cont = dialog.Pulse(msg, &skip); } // each skip will move progress about quarter forward if ( skip ) { i += max/4; if ( i >= 100 ) i = 99; } if ( !cont ) { if ( wxMessageBox(wxT("Do you really want to cancel?"), wxT("Progress dialog question"), // caption wxYES_NO | wxICON_QUESTION) == wxYES ) break; cont = true; dialog.Resume(); } wxMilliSleep(200); } if ( !cont ) { wxLogStatus(wxT("Progress dialog aborted!")); } else { wxLogStatus(wxT("Countdown from %d finished"), max); } } #endif // wxUSE_PROGRESSDLG #if wxUSE_ABOUTDLG static void InitAboutInfoMinimal(wxAboutDialogInfo& info) { info.SetName(wxT("Dialogs Sample")); info.SetVersion(wxVERSION_NUM_DOT_STRING, wxString::Format ( "%s version %s", wxMINOR_VERSION % 2 ? "Development" : "Stable", wxVERSION_NUM_DOT_STRING )); info.SetDescription(wxT("This sample shows different wxWidgets dialogs")); info.SetCopyright(wxT("(C) 1998-2006 wxWidgets dev team")); info.AddDeveloper(wxT("Vadim Zeitlin")); } static void InitAboutInfoWebsite(wxAboutDialogInfo& info) { InitAboutInfoMinimal(info); info.SetWebSite(wxT("http://www.wxwidgets.org/"), wxT("wxWidgets web site")); } static void InitAboutInfoAll(wxAboutDialogInfo& info) { InitAboutInfoWebsite(info); // we can add a second developer info.AddDeveloper(wxT("A.N. Other")); // or we can add several persons at once like this static const wxChar *docwriters[] = { wxT("First D. Writer"), wxT("Second One"), }; info.SetDocWriters(wxArrayString(WXSIZEOF(docwriters), docwriters)); info.SetLicence(wxString::FromAscii( " wxWindows Library Licence, Version 3.1\n" " ======================================\n" "\n" " Copyright (c) 1998-2005 Julian Smart, Robert Roebling et al\n" "\n" " Everyone is permitted to copy and distribute verbatim copies\n" " of this licence document, but changing it is not allowed.\n" "\n" " WXWINDOWS LIBRARY LICENCE\n" " TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION\n" "\n" " ...and so on and so forth...\n" )); info.AddTranslator(wxT("Wun Ngo Wen (Martian)")); } void MyFrame::ShowSimpleAboutDialog(wxCommandEvent& WXUNUSED(event)) { wxAboutDialogInfo info; InitAboutInfoMinimal(info); wxAboutBox(info, this); } void MyFrame::ShowFancyAboutDialog(wxCommandEvent& WXUNUSED(event)) { wxAboutDialogInfo info; InitAboutInfoWebsite(info); wxAboutBox(info, this); } void MyFrame::ShowFullAboutDialog(wxCommandEvent& WXUNUSED(event)) { wxAboutDialogInfo info; InitAboutInfoAll(info); wxAboutBox(info, this); } // a trivial example of a custom dialog class class MyAboutDialog : public wxGenericAboutDialog { public: MyAboutDialog(const wxAboutDialogInfo& info, wxWindow* parent) { Create(info, parent); } // add some custom controls virtual void DoAddCustomControls() { AddControl(new wxStaticLine(this), wxSizerFlags().Expand()); AddText(wxT("Some custom text")); AddControl(new wxStaticLine(this), wxSizerFlags().Expand()); } }; void MyFrame::ShowCustomAboutDialog(wxCommandEvent& WXUNUSED(event)) { wxAboutDialogInfo info; InitAboutInfoAll(info); MyAboutDialog dlg(info, this); dlg.ShowModal(); } #endif // wxUSE_ABOUTDLG #if wxUSE_BUSYINFO void MyFrame::ShowBusyInfo(wxCommandEvent& WXUNUSED(event)) { wxWindowDisabler disableAll; wxBusyInfo info(wxT("Working, please wait..."), this); for ( int i = 0; i < 18; i++ ) { wxMilliSleep(100); wxTheApp->Yield(); } wxSleep(2); //wxWakeUpIdle(); } #endif // wxUSE_BUSYINFO #if wxUSE_FINDREPLDLG void MyFrame::ShowReplaceDialog( wxCommandEvent& WXUNUSED(event) ) { if ( m_dlgReplace ) { wxDELETE(m_dlgReplace); } else { m_dlgReplace = new wxFindReplaceDialog ( this, &m_findData, wxT("Find and replace dialog"), wxFR_REPLACEDIALOG ); m_dlgReplace->Show(true); } } void MyFrame::ShowFindDialog( wxCommandEvent& WXUNUSED(event) ) { if ( m_dlgFind ) { wxDELETE(m_dlgFind); } else { m_dlgFind = new wxFindReplaceDialog ( this, &m_findData, wxT("Find dialog"), // just for testing wxFR_NOWHOLEWORD ); m_dlgFind->Show(true); } } static wxString DecodeFindDialogEventFlags(int flags) { wxString str; str << (flags & wxFR_DOWN ? wxT("down") : wxT("up")) << wxT(", ") << (flags & wxFR_WHOLEWORD ? wxT("whole words only, ") : wxT("")) << (flags & wxFR_MATCHCASE ? wxT("") : wxT("not ")) << wxT("case sensitive"); return str; } void MyFrame::OnFindDialog(wxFindDialogEvent& event) { wxEventType type = event.GetEventType(); if ( type == wxEVT_FIND || type == wxEVT_FIND_NEXT ) { wxLogMessage(wxT("Find %s'%s' (flags: %s)"), type == wxEVT_FIND_NEXT ? wxT("next ") : wxT(""), event.GetFindString().c_str(), DecodeFindDialogEventFlags(event.GetFlags()).c_str()); } else if ( type == wxEVT_FIND_REPLACE || type == wxEVT_FIND_REPLACE_ALL ) { wxLogMessage(wxT("Replace %s'%s' with '%s' (flags: %s)"), type == wxEVT_FIND_REPLACE_ALL ? wxT("all ") : wxT(""), event.GetFindString().c_str(), event.GetReplaceString().c_str(), DecodeFindDialogEventFlags(event.GetFlags()).c_str()); } else if ( type == wxEVT_FIND_CLOSE ) { wxFindReplaceDialog *dlg = event.GetDialog(); int idMenu; const wxChar *txt; if ( dlg == m_dlgFind ) { txt = wxT("Find"); idMenu = DIALOGS_FIND; m_dlgFind = NULL; } else if ( dlg == m_dlgReplace ) { txt = wxT("Replace"); idMenu = DIALOGS_REPLACE; m_dlgReplace = NULL; } else { txt = wxT("Unknown"); idMenu = wxID_ANY; wxFAIL_MSG( wxT("unexpected event") ); } wxLogMessage(wxT("%s dialog is being closed."), txt); if ( idMenu != wxID_ANY ) { GetMenuBar()->Check(idMenu, false); } dlg->Destroy(); } else { wxLogError(wxT("Unknown find dialog event!")); } } #endif // wxUSE_FINDREPLDLG // ---------------------------------------------------------------------------- // MyCanvas // ---------------------------------------------------------------------------- void MyCanvas::OnPaint(wxPaintEvent& WXUNUSED(event) ) { wxPaintDC dc(this); dc.SetBackgroundMode(wxTRANSPARENT); dc.DrawText( wxT("wxWidgets common dialogs") #if !defined(__SMARTPHONE__) wxT(" test application") #endif , 10, 10); } #if USE_MODAL_PRESENTATION // ---------------------------------------------------------------------------- // MyModelessDialog // ---------------------------------------------------------------------------- MyModelessDialog::MyModelessDialog(wxWindow *parent) : wxDialog(parent, wxID_ANY, wxString(wxT("Modeless dialog"))) { wxBoxSizer *sizerTop = new wxBoxSizer(wxVERTICAL); wxButton *btn = new wxButton(this, DIALOGS_MODELESS_BTN, wxT("Press me")); wxCheckBox *check = new wxCheckBox(this, wxID_ANY, wxT("Should be disabled")); check->Disable(); sizerTop->Add(btn, 1, wxEXPAND | wxALL, 5); sizerTop->Add(check, 1, wxEXPAND | wxALL, 5); SetSizerAndFit(sizerTop); } void MyModelessDialog::OnButton(wxCommandEvent& WXUNUSED(event)) { wxMessageBox(wxT("Button pressed in modeless dialog"), wxT("Info"), wxOK | wxICON_INFORMATION, this); } void MyModelessDialog::OnClose(wxCloseEvent& event) { if ( event.CanVeto() ) { wxMessageBox(wxT("Use the menu item to close this dialog"), wxT("Modeless dialog"), wxOK | wxICON_INFORMATION, this); event.Veto(); } } // ---------------------------------------------------------------------------- // MyModalDialog // ---------------------------------------------------------------------------- MyModalDialog::MyModalDialog(wxWindow *parent) : wxDialog(parent, wxID_ANY, wxString(wxT("Modal dialog"))) { wxBoxSizer *sizerTop = new wxBoxSizer(wxHORIZONTAL); m_btnModal = new wxButton(this, wxID_ANY, wxT("&Modal dialog...")); m_btnModeless = new wxButton(this, wxID_ANY, wxT("Mode&less dialog")); m_btnDelete = new wxButton(this, wxID_ANY, wxT("&Delete button")); sizerTop->Add(m_btnModal, 0, wxALIGN_CENTER | wxALL, 5); sizerTop->Add(m_btnModeless, 0, wxALIGN_CENTER | wxALL, 5); sizerTop->Add(m_btnDelete, 0, wxALIGN_CENTER | wxALL, 5); sizerTop->Add(new wxButton(this, wxID_CLOSE), 0, wxALIGN_CENTER | wxALL, 5); SetSizerAndFit(sizerTop); SetEscapeId(wxID_CLOSE); m_btnModal->SetFocus(); m_btnModal->SetDefault(); } void MyModalDialog::OnButton(wxCommandEvent& event) { if ( event.GetEventObject() == m_btnDelete ) { wxDELETE(m_btnModal); m_btnDelete->Disable(); } else if ( event.GetEventObject() == m_btnModal ) { #if wxUSE_TEXTDLG wxGetTextFromUser(wxT("Dummy prompt"), wxT("Modal dialog called from dialog"), wxEmptyString, this); #else wxMessageBox(wxT("Modal dialog called from dialog")); #endif // wxUSE_TEXTDLG } else if ( event.GetEventObject() == m_btnModeless ) { (new MyModelessDialog(this))->Show(); } else { event.Skip(); } } #endif // USE_MODAL_PRESENTATION // ---------------------------------------------------------------------------- // StdButtonSizerDialog // ---------------------------------------------------------------------------- StdButtonSizerDialog::StdButtonSizerDialog(wxWindow *parent) : wxDialog(parent, wxID_ANY, wxString(wxT("StdButtonSizer dialog")), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER), m_buttonsSizer(NULL) { wxBoxSizer *const sizerTop = new wxBoxSizer(wxVERTICAL); wxBoxSizer *const sizer = new wxBoxSizer(wxHORIZONTAL); wxBoxSizer *const sizerInside1 = new wxBoxSizer(wxVERTICAL); m_chkboxAffirmativeButton = new wxCheckBox(this, wxID_ANY, _("Enable Affirmative Button")); wxStaticBoxSizer *const sizer1 = new wxStaticBoxSizer(wxVERTICAL, this, wxT("Affirmative Button")); m_radiobtnOk = new wxRadioButton(this, wxID_ANY, _("Ok"), wxDefaultPosition, wxDefaultSize, wxRB_GROUP); m_radiobtnYes = new wxRadioButton(this, wxID_ANY, _("Yes")); wxBoxSizer *const sizerInside2 = new wxBoxSizer(wxVERTICAL); m_chkboxDismissButton = new wxCheckBox(this, wxID_ANY, _("Enable Dismiss Button")); wxStaticBoxSizer *const sizer2 = new wxStaticBoxSizer(wxVERTICAL, this, wxT("Dismiss Button")); m_radiobtnCancel = new wxRadioButton(this, wxID_ANY, _("Cancel"), wxDefaultPosition, wxDefaultSize, wxRB_GROUP); m_radiobtnClose = new wxRadioButton(this, wxID_ANY, _("Close")); wxBoxSizer *const sizer3 = new wxBoxSizer(wxHORIZONTAL); m_chkboxNo = new wxCheckBox(this, wxID_ANY, _("No")); m_chkboxHelp = new wxCheckBox(this, wxID_ANY, _("Help")); m_chkboxApply = new wxCheckBox(this, wxID_ANY, _("Apply")); m_chkboxNoDefault = new wxCheckBox(this, wxID_ANY, wxT("No Default")); sizer1->Add(m_radiobtnOk, 0, wxALL, 5); sizer1->Add(m_radiobtnYes, 0, wxALL, 5); sizer->Add(sizerInside1, 0, 0, 0); sizerInside1->Add(m_chkboxAffirmativeButton, 0, wxALL, 5); sizerInside1->Add(sizer1, 0, wxALL, 5); sizerInside1->SetItemMinSize(sizer1, sizer1->GetStaticBox()->GetBestSize()); // to prevent wrapping of static box label sizer2->Add(m_radiobtnCancel, 0, wxALL, 5); sizer2->Add(m_radiobtnClose, 0, wxALL, 5); sizer->Add(sizerInside2, 0, 0, 0); sizerInside2->Add(m_chkboxDismissButton, 0, wxALL, 5); sizerInside2->Add(sizer2, 0, wxALL, 5); sizerInside2->SetItemMinSize(sizer2, sizer2->GetStaticBox()->GetBestSize()); // to prevent wrapping of static box label sizerTop->Add(sizer, 0, wxALL, 5); sizer3->Add(m_chkboxNo, 0, wxALL, 5); sizer3->Add(m_chkboxHelp, 0, wxALL, 5); sizer3->Add(m_chkboxApply, 0, wxALL, 5); sizerTop->Add(sizer3, 0, wxALL, 5); sizerTop->Add(m_chkboxNoDefault, 0, wxLEFT|wxRIGHT, 10); EnableDisableControls(); SetSizerAndFit(sizerTop); wxCommandEvent ev; OnEvent(ev); } void StdButtonSizerDialog::OnEvent(wxCommandEvent& WXUNUSED(event)) { if (m_buttonsSizer) { m_buttonsSizer->DeleteWindows(); GetSizer()->Remove(m_buttonsSizer); } EnableDisableControls(); long flags = 0; unsigned long numButtons = 0; if (m_chkboxAffirmativeButton->IsChecked()) { if (m_radiobtnOk->GetValue()) { flags |= wxOK; numButtons ++; } else if (m_radiobtnYes->GetValue()) { flags |= wxYES; numButtons ++; } } if (m_chkboxDismissButton->IsChecked()) { if (m_radiobtnCancel->GetValue()) { flags |= wxCANCEL; numButtons ++; } else if (m_radiobtnClose->GetValue()) { flags |= wxCLOSE; numButtons ++; } } if (m_chkboxApply->IsChecked()) { flags |= wxAPPLY; numButtons ++; } if (m_chkboxNo->IsChecked()) { flags |= wxNO; numButtons ++; } if (m_chkboxHelp->IsChecked()) { flags |= wxHELP; numButtons ++; } if (m_chkboxNoDefault->IsChecked()) { flags |= wxNO_DEFAULT; } m_buttonsSizer = CreateStdDialogButtonSizer(flags); GetSizer()->Add(m_buttonsSizer, 0, wxGROW|wxALL, 5); Layout(); GetSizer()->SetSizeHints(this); } void StdButtonSizerDialog::EnableDisableControls() { const bool affButtonEnabled = m_chkboxAffirmativeButton->IsChecked(); m_radiobtnOk->Enable(affButtonEnabled); m_radiobtnYes->Enable(affButtonEnabled); const bool dismissButtonEnabled = m_chkboxDismissButton->IsChecked(); m_radiobtnCancel->Enable(dismissButtonEnabled); m_radiobtnClose->Enable(dismissButtonEnabled); } #if USE_SETTINGS_DIALOG // ---------------------------------------------------------------------------- // SettingsDialog // ---------------------------------------------------------------------------- IMPLEMENT_CLASS(SettingsDialog, wxPropertySheetDialog) BEGIN_EVENT_TABLE(SettingsDialog, wxPropertySheetDialog) END_EVENT_TABLE() SettingsDialog::SettingsDialog(wxWindow* win, int dialogType) { SetExtraStyle(wxDIALOG_EX_CONTEXTHELP|wxWS_EX_VALIDATE_RECURSIVELY); int tabImage1 = -1; int tabImage2 = -1; bool useToolBook = (dialogType == DIALOGS_PROPERTY_SHEET_TOOLBOOK || dialogType == DIALOGS_PROPERTY_SHEET_BUTTONTOOLBOOK); int resizeBorder = wxRESIZE_BORDER; if (useToolBook) { resizeBorder = 0; tabImage1 = 0; tabImage2 = 1; int sheetStyle = wxPROPSHEET_SHRINKTOFIT; if (dialogType == DIALOGS_PROPERTY_SHEET_BUTTONTOOLBOOK) sheetStyle |= wxPROPSHEET_BUTTONTOOLBOOK; else sheetStyle |= wxPROPSHEET_TOOLBOOK; SetSheetStyle(sheetStyle); SetSheetInnerBorder(0); SetSheetOuterBorder(0); // create a dummy image list with a few icons const wxSize imageSize(32, 32); m_imageList = new wxImageList(imageSize.GetWidth(), imageSize.GetHeight()); m_imageList-> Add(wxArtProvider::GetIcon(wxART_INFORMATION, wxART_OTHER, imageSize)); m_imageList-> Add(wxArtProvider::GetIcon(wxART_QUESTION, wxART_OTHER, imageSize)); m_imageList-> Add(wxArtProvider::GetIcon(wxART_WARNING, wxART_OTHER, imageSize)); m_imageList-> Add(wxArtProvider::GetIcon(wxART_ERROR, wxART_OTHER, imageSize)); } else m_imageList = NULL; Create(win, wxID_ANY, _("Preferences"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE| (int)wxPlatform::IfNot(wxOS_WINDOWS_CE, resizeBorder) ); // If using a toolbook, also follow Mac style and don't create buttons if (!useToolBook) CreateButtons(wxOK | wxCANCEL | (int)wxPlatform::IfNot(wxOS_WINDOWS_CE, wxHELP) ); wxBookCtrlBase* notebook = GetBookCtrl(); notebook->SetImageList(m_imageList); wxPanel* generalSettings = CreateGeneralSettingsPage(notebook); wxPanel* aestheticSettings = CreateAestheticSettingsPage(notebook); notebook->AddPage(generalSettings, _("General"), true, tabImage1); notebook->AddPage(aestheticSettings, _("Aesthetics"), false, tabImage2); LayoutDialog(); } SettingsDialog::~SettingsDialog() { delete m_imageList; } wxPanel* SettingsDialog::CreateGeneralSettingsPage(wxWindow* parent) { wxPanel* panel = new wxPanel(parent, wxID_ANY); wxBoxSizer *topSizer = new wxBoxSizer( wxVERTICAL ); wxBoxSizer *item0 = new wxBoxSizer( wxVERTICAL ); //// LOAD LAST FILE wxBoxSizer* itemSizer3 = new wxBoxSizer( wxHORIZONTAL ); wxCheckBox* checkBox3 = new wxCheckBox(panel, ID_LOAD_LAST_PROJECT, _("&Load last project on startup"), wxDefaultPosition, wxDefaultSize); itemSizer3->Add(checkBox3, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); item0->Add(itemSizer3, 0, wxGROW|wxALL, 0); //// AUTOSAVE wxString autoSaveLabel = _("&Auto-save every"); wxString minsLabel = _("mins"); wxBoxSizer* itemSizer12 = new wxBoxSizer( wxHORIZONTAL ); wxCheckBox* checkBox12 = new wxCheckBox(panel, ID_AUTO_SAVE, autoSaveLabel, wxDefaultPosition, wxDefaultSize); #if wxUSE_SPINCTRL wxSpinCtrl* spinCtrl12 = new wxSpinCtrl(panel, ID_AUTO_SAVE_MINS, wxEmptyString, wxDefaultPosition, wxSize(40, wxDefaultCoord), wxSP_ARROW_KEYS, 1, 60, 1); #endif itemSizer12->Add(checkBox12, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); #if wxUSE_SPINCTRL itemSizer12->Add(spinCtrl12, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); #endif itemSizer12->Add(new wxStaticText(panel, wxID_STATIC, minsLabel), 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); item0->Add(itemSizer12, 0, wxGROW|wxALL, 0); //// TOOLTIPS wxBoxSizer* itemSizer8 = new wxBoxSizer( wxHORIZONTAL ); wxCheckBox* checkBox6 = new wxCheckBox(panel, ID_SHOW_TOOLTIPS, _("Show &tooltips"), wxDefaultPosition, wxDefaultSize); itemSizer8->Add(checkBox6, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); item0->Add(itemSizer8, 0, wxGROW|wxALL, 0); topSizer->Add( item0, 1, wxGROW|wxALIGN_CENTRE|wxALL, 5 ); panel->SetSizerAndFit(topSizer); return panel; } wxPanel* SettingsDialog::CreateAestheticSettingsPage(wxWindow* parent) { wxPanel* panel = new wxPanel(parent, wxID_ANY); wxBoxSizer *topSizer = new wxBoxSizer( wxVERTICAL ); wxBoxSizer *item0 = new wxBoxSizer( wxVERTICAL ); //// PROJECT OR GLOBAL wxString globalOrProjectChoices[2]; globalOrProjectChoices[0] = _("&New projects"); globalOrProjectChoices[1] = _("&This project"); wxRadioBox* projectOrGlobal = new wxRadioBox(panel, ID_APPLY_SETTINGS_TO, _("&Apply settings to:"), wxDefaultPosition, wxDefaultSize, 2, globalOrProjectChoices); item0->Add(projectOrGlobal, 0, wxGROW|wxALL, 5); projectOrGlobal->SetSelection(0); //// BACKGROUND STYLE wxArrayString backgroundStyleChoices; backgroundStyleChoices.Add(wxT("Colour")); backgroundStyleChoices.Add(wxT("Image")); wxStaticBox* staticBox3 = new wxStaticBox(panel, wxID_ANY, _("Background style:")); wxBoxSizer* styleSizer = new wxStaticBoxSizer( staticBox3, wxVERTICAL ); item0->Add(styleSizer, 0, wxGROW|wxALL, 5); wxBoxSizer* itemSizer2 = new wxBoxSizer( wxHORIZONTAL ); wxChoice* choice2 = new wxChoice(panel, ID_BACKGROUND_STYLE, wxDefaultPosition, wxDefaultSize, backgroundStyleChoices); itemSizer2->Add(new wxStaticText(panel, wxID_ANY, _("&Window:")), 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); itemSizer2->Add(5, 5, 1, wxALL, 0); itemSizer2->Add(choice2, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5); styleSizer->Add(itemSizer2, 0, wxGROW|wxALL, 5); #if wxUSE_SPINCTRL //// FONT SIZE SELECTION wxStaticBox* staticBox1 = new wxStaticBox(panel, wxID_ANY, _("Tile font size:")); wxBoxSizer* itemSizer5 = new wxStaticBoxSizer( staticBox1, wxHORIZONTAL ); wxSpinCtrl* spinCtrl = new wxSpinCtrl(panel, ID_FONT_SIZE, wxEmptyString, wxDefaultPosition, wxSize(80, wxDefaultCoord)); itemSizer5->Add(spinCtrl, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5); item0->Add(itemSizer5, 0, wxGROW|wxLEFT|wxRIGHT, 5); #endif topSizer->Add( item0, 1, wxGROW|wxALIGN_CENTRE|wxALL, 5 ); topSizer->AddSpacer(5); panel->SetSizerAndFit(topSizer); return panel; } #endif // USE_SETTINGS_DIALOG #if wxUSE_MSGDLG // ---------------------------------------------------------------------------- // TestMessageBoxDialog // ---------------------------------------------------------------------------- /* static */ const TestMessageBoxDialog::BtnInfo TestMessageBoxDialog::ms_btnInfo[] = { { wxYES, "&Yes" }, { wxNO, "&No" }, { wxOK, "&Ok" }, { wxCANCEL, "&Cancel" }, { wxHELP, "&Help" }, }; BEGIN_EVENT_TABLE(TestMessageBoxDialog, wxDialog) EVT_BUTTON(wxID_APPLY, TestMessageBoxDialog::OnApply) EVT_BUTTON(wxID_CLOSE, TestMessageBoxDialog::OnClose) END_EVENT_TABLE() TestMessageBoxDialog::TestMessageBoxDialog(wxWindow *parent) : wxDialog(parent, wxID_ANY, "Message Box Test Dialog", wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER) { } bool TestMessageBoxDialog::Create() { wxSizer * const sizerTop = new wxBoxSizer(wxVERTICAL); // this sizer allows to configure the messages shown in the message box wxSizer * const sizerMsgs = new wxStaticBoxSizer(wxVERTICAL, this, "&Messages"); sizerMsgs->Add(new wxStaticText(this, wxID_ANY, "&Title:")); m_textTitle = new wxTextCtrl(this, wxID_ANY, "Test Message Box"); sizerMsgs->Add(m_textTitle, wxSizerFlags().Expand().Border(wxBOTTOM)); sizerMsgs->Add(new wxStaticText(this, wxID_ANY, "&Main message:")); m_textMsg = new wxTextCtrl(this, wxID_ANY, "Hello from a box!", wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE); sizerMsgs->Add(m_textMsg, wxSizerFlags(1).Expand().Border(wxBOTTOM)); sizerMsgs->Add(new wxStaticText(this, wxID_ANY, "&Extended message:")); m_textExtMsg = new wxTextCtrl(this, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE); sizerMsgs->Add(m_textExtMsg, wxSizerFlags(1).Expand()); sizerTop->Add(sizerMsgs, wxSizerFlags(1).Expand().Border()); // if a derived class provides more message configurations, add these. AddAdditionalTextOptions(sizerTop); // this one is for configuring the buttons wxSizer * const sizerBtnsBox = new wxStaticBoxSizer(wxVERTICAL, this, "&Buttons"); wxFlexGridSizer * const sizerBtns = new wxFlexGridSizer(2, 5, 5); sizerBtns->AddGrowableCol(1); sizerBtns->Add(new wxStaticText(this, wxID_ANY, "Button(s)")); sizerBtns->Add(new wxStaticText(this, wxID_ANY, "Custom label")); for ( int n = 0; n < Btn_Max; n++ ) { m_buttons[n] = new wxCheckBox(this, wxID_ANY, ms_btnInfo[n].name); sizerBtns->Add(m_buttons[n], wxSizerFlags().Centre().Left()); m_labels[n] = new wxTextCtrl(this, wxID_ANY); sizerBtns->Add(m_labels[n], wxSizerFlags(1).Centre().Expand()); m_labels[n]->Connect(wxEVT_UPDATE_UI, wxUpdateUIEventHandler( TestMessageBoxDialog::OnUpdateLabelUI), NULL, this); } sizerBtnsBox->Add(sizerBtns, wxSizerFlags(1).Expand()); sizerTop->Add(sizerBtnsBox, wxSizerFlags().Expand().Border()); // icon choice const wxString icons[] = { "&Not specified", "E&xplicitly none", "&Information icon", "&Question icon", "&Warning icon", "&Error icon", "A&uth needed icon" }; wxCOMPILE_TIME_ASSERT( WXSIZEOF(icons) == MsgDlgIcon_Max, IconMismatch ); m_icons = new wxRadioBox(this, wxID_ANY, "&Icon style", wxDefaultPosition, wxDefaultSize, WXSIZEOF(icons), icons, 2, wxRA_SPECIFY_ROWS); // Make the 'Information' icon the default one: m_icons->SetSelection(MsgDlgIcon_Info); sizerTop->Add(m_icons, wxSizerFlags().Expand().Border()); // miscellaneous other stuff wxSizer * const sizerFlags = new wxStaticBoxSizer(wxHORIZONTAL, this, "&Other flags"); m_chkNoDefault = new wxCheckBox(this, wxID_ANY, "Make \"No\" &default"); m_chkNoDefault->Connect(wxEVT_UPDATE_UI, wxUpdateUIEventHandler( TestMessageBoxDialog::OnUpdateNoDefaultUI), NULL, this); sizerFlags->Add(m_chkNoDefault, wxSizerFlags(1).Border()); m_chkCentre = new wxCheckBox(this, wxID_ANY, "Centre on &parent"); sizerFlags->Add(m_chkCentre, wxSizerFlags(1).Border()); // add any additional flag from subclasses AddAdditionalFlags(sizerFlags); sizerTop->Add(sizerFlags, wxSizerFlags().Expand().Border()); // finally buttons to show the resulting message box and close this dialog sizerTop->Add(CreateStdDialogButtonSizer(wxAPPLY | wxCLOSE), wxSizerFlags().Right().Border()); SetSizerAndFit(sizerTop); m_buttons[Btn_Ok]->SetValue(true); return true; } void TestMessageBoxDialog::OnUpdateLabelUI(wxUpdateUIEvent& event) { for ( int n = 0; n < Btn_Max; n++ ) { if ( event.GetEventObject() == m_labels[n] ) { event.Enable( m_buttons[n]->IsChecked() ); return; } } wxFAIL_MSG( "called for unknown label" ); } void TestMessageBoxDialog::OnUpdateNoDefaultUI(wxUpdateUIEvent& event) { event.Enable( m_buttons[Btn_No]->IsChecked() ); } long TestMessageBoxDialog::GetStyle() { long style = 0; for ( int n = 0; n < Btn_Max; n++ ) { if ( m_buttons[n]->IsChecked() ) style |= ms_btnInfo[n].flag; } switch ( m_icons->GetSelection() ) { case MsgDlgIcon_Max: wxFAIL_MSG( "unexpected selection" ); case MsgDlgIcon_No: break; case MsgDlgIcon_None: style |= wxICON_NONE; break; case MsgDlgIcon_Info: style |= wxICON_INFORMATION; break; case MsgDlgIcon_Question: style |= wxICON_QUESTION; break; case MsgDlgIcon_Warning: style |= wxICON_WARNING; break; case MsgDlgIcon_Error: style |= wxICON_ERROR; break; case MsgDlgIcon_AuthNeeded: style |= wxICON_AUTH_NEEDED; break; } if ( m_chkCentre->IsChecked() ) style |= wxCENTRE; if ( m_chkNoDefault->IsEnabled() && m_chkNoDefault->IsChecked() ) style |= wxNO_DEFAULT; return style; } void TestMessageBoxDialog::PrepareMessageDialog(wxMessageDialogBase &dlg) { long style = dlg.GetMessageDialogStyle(); if ( !m_textExtMsg->IsEmpty() ) dlg.SetExtendedMessage(m_textExtMsg->GetValue()); if ( style & wxYES_NO ) { if ( style & wxCANCEL ) { dlg.SetYesNoCancelLabels(m_labels[Btn_Yes]->GetValue(), m_labels[Btn_No]->GetValue(), m_labels[Btn_Cancel]->GetValue()); } else { dlg.SetYesNoLabels(m_labels[Btn_Yes]->GetValue(), m_labels[Btn_No]->GetValue()); } } else { if ( style & wxCANCEL ) { dlg.SetOKCancelLabels(m_labels[Btn_Ok]->GetValue(), m_labels[Btn_Cancel]->GetValue()); } else { dlg.SetOKLabel(m_labels[Btn_Ok]->GetValue()); } } if ( style & wxHELP ) { dlg.SetHelpLabel(m_labels[Btn_Help]->GetValue()); } } void TestMessageBoxDialog::OnApply(wxCommandEvent& WXUNUSED(event)) { wxMessageDialog dlg(this, GetMessage(), GetBoxTitle(), GetStyle()); PrepareMessageDialog(dlg); wxString btnName; switch ( dlg.ShowModal() ) { case wxID_OK: btnName = "OK"; break; case wxID_CANCEL: // Avoid the extra message box if the dialog was cancelled. return; case wxID_YES: btnName = "Yes"; break; case wxID_NO: btnName = "No"; break; case wxID_HELP: btnName = "Help"; break; default: btnName = "Unknown"; } wxLogMessage("Dialog was closed with the \"%s\" button.", btnName); } void TestMessageBoxDialog::OnClose(wxCommandEvent& WXUNUSED(event)) { EndModal(wxID_CANCEL); } #endif // wxUSE_MSGDLG #if wxUSE_RICHMSGDLG // ---------------------------------------------------------------------------- // TestRichMessageDialog // ---------------------------------------------------------------------------- BEGIN_EVENT_TABLE(TestRichMessageDialog, TestMessageBoxDialog) EVT_BUTTON(wxID_APPLY, TestRichMessageDialog::OnApply) END_EVENT_TABLE() TestRichMessageDialog::TestRichMessageDialog(wxWindow *parent) : TestMessageBoxDialog(parent) { SetTitle("Rich Message Dialog Test Dialog"); } void TestRichMessageDialog::AddAdditionalTextOptions(wxSizer *sizer) { wxSizer * const sizerMsgs = new wxStaticBoxSizer(wxVERTICAL, this, "&Additional Elements"); // add a option to show a check box. wxFlexGridSizer * const sizerCheckBox = new wxFlexGridSizer(2, 5, 5); sizerCheckBox->AddGrowableCol(1); sizerCheckBox->Add(new wxStaticText(this, wxID_ANY, "&Check box:")); m_textCheckBox = new wxTextCtrl(this, wxID_ANY); sizerCheckBox->Add(m_textCheckBox, wxSizerFlags(1).Expand().Border(wxBOTTOM)); sizerMsgs->Add(sizerCheckBox, wxSizerFlags(1).Expand()); // add option to show a detailed text. sizerMsgs->Add(new wxStaticText(this, wxID_ANY, "&Detailed message:")); m_textDetailed = new wxTextCtrl(this, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE); sizerMsgs->Add(m_textDetailed, wxSizerFlags(1).Expand()); sizer->Add(sizerMsgs, wxSizerFlags(1).Expand().Border()); } void TestRichMessageDialog::AddAdditionalFlags(wxSizer *sizer) { // add checkbox to set the initial state for the checkbox shown // in the dialog. m_initialValueCheckBox = new wxCheckBox(this, wxID_ANY, "Checkbox initially checked"); sizer->Add(m_initialValueCheckBox, wxSizerFlags(1).Border()); } void TestRichMessageDialog::OnApply(wxCommandEvent& WXUNUSED(event)) { wxRichMessageDialog dlg(this, GetMessage(), GetBoxTitle(), GetStyle()); PrepareMessageDialog(dlg); dlg.ShowCheckBox(m_textCheckBox->GetValue(), m_initialValueCheckBox->GetValue()); dlg.ShowDetailedText(m_textDetailed->GetValue()); dlg.ShowModal(); } #endif // wxUSE_RICHMSGDLG #if wxUSE_LOG // ---------------------------------------------------------------------------- // custom log target // ---------------------------------------------------------------------------- class MyLogGui : public wxLogGui { private: virtual void DoShowSingleLogMessage(const wxString& message, const wxString& title, int style) { wxMessageDialog dlg(NULL, message, title, wxOK | wxCANCEL | wxCANCEL_DEFAULT | style); dlg.SetOKCancelLabels(wxID_COPY, wxID_OK); dlg.SetExtendedMessage("Note that this is a custom log dialog."); dlg.ShowModal(); } }; wxLog *MyAppTraits::CreateLogTarget() { return new MyLogGui; } #endif // wxUSE_LOG