///////////////////////////////////////////////////////////////////////////// // Name: toolbar.h // Purpose: interface of wxToolBar // Author: wxWidgets team // RCS-ID: $Id$ // Licence: wxWindows licence ///////////////////////////////////////////////////////////////////////////// /** @class wxToolBar A toolbar is a bar of buttons and/or other controls usually placed below the menu bar in a wxFrame. You may create a toolbar that is managed by a frame calling wxFrame::CreateToolBar(). Under Pocket PC, you should always use this function for creating the toolbar to be managed by the frame, so that wxWidgets can use a combined menubar and toolbar. Where you manage your own toolbars, create wxToolBar as usual. There are several different types of tools you can add to a toolbar. These types are controlled by the ::wxItemKind enumeration. Note that many methods in wxToolBar such as wxToolBar::AddTool return a @c wxToolBarToolBase* object. This should be regarded as an opaque handle representing the newly added toolbar item, providing access to its id and position within the toolbar. Changes to the item's state should be made through calls to wxToolBar methods, for example wxToolBar::EnableTool. Calls to @c wxToolBarToolBase methods (undocumented by purpose) will not change the visible state of the item within the the tool bar. wxMSW note: Note that under wxMSW toolbar paints tools to reflect system-wide colours. If you use more than 16 colours in your tool bitmaps, you may wish to suppress this behaviour, otherwise system colours in your bitmaps will inadvertently be mapped to system colours. To do this, set the msw.remap system option before creating the toolbar: @code wxSystemOptions::SetOption("msw.remap", 0); @endcode If you wish to use 32-bit images (which include an alpha channel for transparency) use: @code wxSystemOptions::SetOption("msw.remap", 2); @endcode Then colour remapping is switched off, and a transparent background used. But only use this option under Windows XP with true colour: @code if (wxTheApp->GetComCtl32Version() >= 600 && ::wxDisplayDepth() >= 32) @endcode @beginStyleTable @style{wxTB_FLAT} Gives the toolbar a flat look (Windows and GTK only). @style{wxTB_DOCKABLE} Makes the toolbar floatable and dockable (GTK only). @style{wxTB_HORIZONTAL} Specifies horizontal layout (default). @style{wxTB_VERTICAL} Specifies vertical layout. @style{wxTB_TEXT} Shows the text in the toolbar buttons; by default only icons are shown. @style{wxTB_NOICONS} Specifies no icons in the toolbar buttons; by default they are shown. @style{wxTB_NODIVIDER} Specifies no divider (border) above the toolbar (Windows only) @style{wxTB_NOALIGN} Specifies no alignment with the parent window (Windows only, not very useful). @style{wxTB_HORZ_LAYOUT} Shows the text and the icons alongside, not vertically stacked (Windows and GTK 2 only). This style must be used with @c wxTB_TEXT. @style{wxTB_HORZ_TEXT} Combination of @c wxTB_HORZ_LAYOUT and @c wxTB_TEXT. @style{wxTB_NO_TOOLTIPS} Don't show the short help tooltips for the tools when the mouse hovers over them. @style{wxTB_BOTTOM} Align the toolbar at the bottom of parent window. @style{wxTB_RIGHT} Align the toolbar at the right side of parent window. @endStyleTable See also @ref overview_windowstyles. Note that the wxMSW native toolbar ignores @c wxTB_NOICONS style. Also, toggling the @c wxTB_TEXT works only if the style was initially on. @beginEventEmissionTable{wxCommandEvent} @event{EVT_TOOL(id, func)} Process a @c wxEVT_COMMAND_TOOL_CLICKED event (a synonym for @c wxEVT_COMMAND_MENU_SELECTED). Pass the id of the tool. @event{EVT_MENU(id, func)} The same as EVT_TOOL(). @event{EVT_TOOL_RANGE(id1, id2, func)} Process a @c wxEVT_COMMAND_TOOL_CLICKED event for a range of identifiers. Pass the ids of the tools. @event{EVT_MENU_RANGE(id1, id2, func)} The same as EVT_TOOL_RANGE(). @event{EVT_TOOL_RCLICKED(id, func)} Process a @c wxEVT_COMMAND_TOOL_RCLICKED event. Pass the id of the tool. (Not available on wxOSX.) @event{EVT_TOOL_RCLICKED_RANGE(id1, id2, func)} Process a @c wxEVT_COMMAND_TOOL_RCLICKED event for a range of ids. Pass the ids of the tools. (Not available on wxOSX.) @event{EVT_TOOL_ENTER(id, func)} Process a @c wxEVT_COMMAND_TOOL_ENTER event. Pass the id of the toolbar itself. The value of wxCommandEvent::GetSelection() is the tool id, or -1 if the mouse cursor has moved off a tool. (Not available on wxOSX.) @event{EVT_TOOL_DROPDOWN(id, func)} Process a @c wxEVT_COMMAND_TOOL_DROPDOWN_CLICKED event. If unhandled, displays the default dropdown menu set using wxToolBar::SetDropdownMenu(). @endEventTable The toolbar class emits menu commands in the same way that a frame menubar does, so you can use one EVT_MENU() macro for both a menu item and a toolbar button. The event handler functions take a wxCommandEvent argument. For most event macros, the identifier of the tool is passed, but for EVT_TOOL_ENTER() the toolbar window identifier is passed and the tool identifier is retrieved from the wxCommandEvent. This is because the identifier may be @c wxID_ANY when the mouse moves off a tool, and @c wxID_ANY is not allowed as an identifier in the event system. @library{wxcore} @category{miscwnd} @see @ref overview_toolbar */ class wxToolBar : public wxControl { public: /** Default constructor. */ wxToolBar(); /** Constructs a toolbar. @param parent Pointer to a parent window. @param id Window identifier. If -1, will automatically create an identifier. @param pos Window position. ::wxDefaultPosition indicates that wxWidgets should generate a default position for the window. If using the wxWindow class directly, supply an actual position. @param size Window size. ::wxDefaultSize indicates that wxWidgets should generate a default size for the window. @param style Window style. See wxToolBar initial description for details. @param name Window name. @remarks After a toolbar is created, you use AddTool() and perhaps AddSeparator(), and then you must call Realize() to construct and display the toolbar tools. */ wxToolBar(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxTB_HORIZONTAL, const wxString& name = wxToolBarNameStr); /** Toolbar destructor. */ virtual ~wxToolBar(); /** Adds a new check (or toggle) tool to the toolbar. The parameters are the same as in AddTool(). @see AddTool() */ wxToolBarToolBase* AddCheckTool(int toolId, const wxString& label, const wxBitmap& bitmap1, const wxBitmap& bmpDisabled = wxNullBitmap, const wxString& shortHelp = wxEmptyString, const wxString& longHelp = wxEmptyString, wxObject* clientData = NULL); /** Adds any control to the toolbar, typically e.g. a wxComboBox. @param control The control to be added. @param label Text to be displayed near the control. @remarks wxMSW: the label is only displayed if there is enough space available below the embedded control. @remarks wxMac: labels are only displayed if wxWidgets is built with @c wxMAC_USE_NATIVE_TOOLBAR set to 1 */ virtual wxToolBarToolBase* AddControl(wxControl* control, const wxString& label = wxEmptyString); /** Adds a new radio tool to the toolbar. Consecutive radio tools form a radio group such that exactly one button in the group is pressed at any moment, in other words whenever a button in the group is pressed the previously pressed button is automatically released. You should avoid having the radio groups of only one element as it would be impossible for the user to use such button. By default, the first button in the radio group is initially pressed, the others are not. @see AddTool() */ wxToolBarToolBase* AddRadioTool(int toolId, const wxString& label, const wxBitmap& bitmap1, const wxBitmap& bmpDisabled = wxNullBitmap, const wxString& shortHelp = wxEmptyString, const wxString& longHelp = wxEmptyString, wxObject* clientData = NULL); /** Adds a separator for spacing groups of tools. Notice that the separator uses the look appropriate for the current platform so it can be a vertical line (MSW, some versions of GTK) or just an empty space or something else. @see AddTool(), SetToolSeparation(), AddStretchableSpace() */ virtual wxToolBarToolBase* AddSeparator(); /** Adds a stretchable space to the toolbar. Any space not taken up by the fixed items (all items except for stretchable spaces) is distributed in equal measure between the stretchable spaces in the toolbar. The most common use for this method is to add a single stretchable space before the items which should be right-aligned in the toolbar, but more exotic possibilities are possible, e.g. a stretchable space may be added in the beginning and the end of the toolbar to centre all toolbar items. @see AddTool(), AddSeparator(), InsertStretchableSpace() @since 2.9.1 */ wxToolBarToolBase *AddStretchableSpace(); //@{ /** Adds a tool to the toolbar. @param tool The tool to be added. @remarks After you have added tools to a toolbar, you must call Realize() in order to have the tools appear. @see AddSeparator(), AddCheckTool(), AddRadioTool(), InsertTool(), DeleteTool(), Realize(), SetDropdownMenu() */ virtual wxToolBarToolBase* AddTool(wxToolBarToolBase* tool); /** Adds a tool to the toolbar. This most commonly used version has fewer parameters than the full version below which specifies the more rarely used button features. @param toolId An integer by which the tool may be identified in subsequent operations. @param label The string to be displayed with the tool. @param bitmap The primary tool bitmap. @param shortHelp This string is used for the tools tooltip. @param kind May be ::wxITEM_NORMAL for a normal button (default), ::wxITEM_CHECK for a checkable tool (such tool stays pressed after it had been toggled) or ::wxITEM_RADIO for a checkable tool which makes part of a radio group of tools each of which is automatically unchecked whenever another button in the group is checked. ::wxITEM_DROPDOWN specifies that a drop-down menu button will appear next to the tool button (only GTK+ and MSW). Call SetDropdownMenu() afterwards. @remarks After you have added tools to a toolbar, you must call Realize() in order to have the tools appear. @see AddSeparator(), AddCheckTool(), AddRadioTool(), InsertTool(), DeleteTool(), Realize(), SetDropdownMenu() */ wxToolBarToolBase* AddTool(int toolId, const wxString& label, const wxBitmap& bitmap, const wxString& shortHelp = wxEmptyString, wxItemKind kind = wxITEM_NORMAL); /** Adds a tool to the toolbar. @param toolId An integer by which the tool may be identified in subsequent operations. @param label The string to be displayed with the tool. @param bitmap The primary tool bitmap. @param bmpDisabled The bitmap used when the tool is disabled. If it is equal to ::wxNullBitmap (default), the disabled bitmap is automatically generated by greying the normal one. @param kind May be ::wxITEM_NORMAL for a normal button (default), ::wxITEM_CHECK for a checkable tool (such tool stays pressed after it had been toggled) or ::wxITEM_RADIO for a checkable tool which makes part of a radio group of tools each of which is automatically unchecked whenever another button in the group is checked. ::wxITEM_DROPDOWN specifies that a drop-down menu button will appear next to the tool button (only GTK+ and MSW). Call SetDropdownMenu() afterwards. @param shortHelpString This string is used for the tools tooltip. @param longHelpString This string is shown in the statusbar (if any) of the parent frame when the mouse pointer is inside the tool. @param clientData An optional pointer to client data which can be retrieved later using GetToolClientData(). @remarks After you have added tools to a toolbar, you must call Realize() in order to have the tools appear. @see AddSeparator(), AddCheckTool(), AddRadioTool(), InsertTool(), DeleteTool(), Realize(), SetDropdownMenu() */ wxToolBarToolBase* AddTool(int toolId, const wxString& label, const wxBitmap& bitmap, const wxBitmap& bmpDisabled = wxNullBitmap, wxItemKind kind = wxITEM_NORMAL, const wxString& shortHelpString = wxEmptyString, const wxString& longHelpString = wxEmptyString, wxObject* clientData = NULL); //@} /** Deletes all the tools in the toolbar. */ virtual void ClearTools(); /** Removes the specified tool from the toolbar and deletes it. If you don't want to delete the tool, but just to remove it from the toolbar (to possibly add it back later), you may use RemoveTool() instead. @note It is unnecessary to call Realize() for the change to take place, it will happen immediately. @returns @true if the tool was deleted, @false otherwise. @see DeleteToolByPos() */ virtual bool DeleteTool(int toolId); /** This function behaves like DeleteTool() but it deletes the tool at the specified position and not the one with the given id. */ virtual bool DeleteToolByPos(size_t pos); /** Enables or disables the tool. @param toolId Tool to enable or disable. @param enable If @true, enables the tool, otherwise disables it. @remarks Some implementations will change the visible state of the tool to indicate that it is disabled. @see GetToolEnabled(), ToggleTool() */ virtual void EnableTool(int toolId, bool enable); /** Returns a pointer to the tool identified by @a id or @NULL if no corresponding tool is found. */ wxToolBarToolBase* FindById(int id) const; /** Returns a pointer to the control identified by @a id or @NULL if no corresponding control is found. */ virtual wxControl* FindControl(int id); /** Finds a tool for the given mouse position. @param x X position. @param y Y position. @return A pointer to a tool if a tool is found, or @NULL otherwise. @remarks Currently not implemented in wxGTK (always returns @NULL there). */ virtual wxToolBarToolBase* FindToolForPosition(wxCoord x, wxCoord y) const; /** Returns the left/right and top/bottom margins, which are also used for inter-toolspacing. @see SetMargins() */ wxSize GetMargins() const; /** Returns the size of bitmap that the toolbar expects to have. The default bitmap size is platform-dependent: for example, it is 16*15 for MSW and 24*24 for GTK. This size does @em not necessarily indicate the best size to use for the toolbars on the given platform, for this you should use @c wxArtProvider::GetNativeSizeHint(wxART_TOOLBAR) but in any case, as the bitmap size is deduced automatically from the size of the bitmaps associated with the tools added to the toolbar, it is usually unnecessary to call SetToolBitmapSize() explicitly. @remarks Note that this is the size of the bitmap you pass to AddTool(), and not the eventual size of the tool button. @see SetToolBitmapSize(), GetToolSize() */ virtual wxSize GetToolBitmapSize() const; /** Returns a pointer to the tool at ordinal position @a pos. Don't confuse this with FindToolForPosition(). @since 2.9.1 @see GetToolsCount() */ const wxToolBarToolBase *GetToolByPos(int pos) const; /** Get any client data associated with the tool. @param toolId Id of the tool, as passed to AddTool(). @return Client data, or @NULL if there is none. */ virtual wxObject* GetToolClientData(int toolId) const; /** Called to determine whether a tool is enabled (responds to user input). @param toolId Id of the tool in question. @return @true if the tool is enabled, @false otherwise. @see EnableTool() */ virtual bool GetToolEnabled(int toolId) const; /** Returns the long help for the given tool. @param toolId The tool in question. @see SetToolLongHelp(), SetToolShortHelp() */ virtual wxString GetToolLongHelp(int toolId) const; /** Returns the value used for packing tools. @see SetToolPacking() */ virtual int GetToolPacking() const; /** Returns the tool position in the toolbar, or @c wxNOT_FOUND if the tool is not found. */ virtual int GetToolPos(int toolId) const; /** Returns the default separator size. @see SetToolSeparation() */ virtual int GetToolSeparation() const; /** Returns the short help for the given tool. @param toolId The tool in question. @see GetToolLongHelp(), SetToolShortHelp() */ virtual wxString GetToolShortHelp(int toolId) const; /** Returns the size of a whole button, which is usually larger than a tool bitmap because of added 3D effects. @see SetToolBitmapSize(), GetToolBitmapSize() */ virtual wxSize GetToolSize() const; /** Gets the on/off state of a toggle tool. @param toolId The tool in question. @return @true if the tool is toggled on, @false otherwise. @see ToggleTool() */ virtual bool GetToolState(int toolId) const; /** Returns the number of tools in the toolbar. */ size_t GetToolsCount() const; /** Inserts the control into the toolbar at the given position. You must call Realize() for the change to take place. @see AddControl(), InsertTool() */ virtual wxToolBarToolBase* InsertControl(size_t pos, wxControl* control, const wxString& label = wxEmptyString); /** Inserts the separator into the toolbar at the given position. You must call Realize() for the change to take place. @see AddSeparator(), InsertTool() */ virtual wxToolBarToolBase* InsertSeparator(size_t pos); /** Inserts a stretchable space at the given position. See AddStretchableSpace() for details about stretchable spaces. @see InsertTool(), InsertSeparator() @since 2.9.1 */ wxToolBarToolBase *InsertStretchableSpace(size_t pos); //@{ /** Inserts the tool with the specified attributes into the toolbar at the given position. You must call Realize() for the change to take place. @see AddTool(), InsertControl(), InsertSeparator() @return The newly inserted tool or @NULL on failure. Notice that with the overload taking @a tool parameter the caller is responsible for deleting the tool in the latter case. */ wxToolBarToolBase* InsertTool(size_t pos, int toolId, const wxBitmap& bitmap1, const wxBitmap& bitmap2 = wxNullBitmap, bool isToggle = false, wxObject* clientData = NULL, const wxString& shortHelpString = wxEmptyString, const wxString& longHelpString = wxEmptyString); wxToolBarToolBase* InsertTool(size_t pos, wxToolBarToolBase* tool); //@} /** Called when the user clicks on a tool with the left mouse button. This is the old way of detecting tool clicks; although it will still work, you should use the EVT_MENU() or EVT_TOOL() macro instead. @param toolId The identifier passed to AddTool(). @param toggleDown @true if the tool is a toggle and the toggle is down, otherwise is @false. @return If the tool is a toggle and this function returns @false, the toggle state (internal and visual) will not be changed. This provides a way of specifying that toggle operations are not permitted in some circumstances. @see OnMouseEnter(), OnRightClick() */ virtual bool OnLeftClick(int toolId, bool toggleDown); /** This is called when the mouse cursor moves into a tool or out of the toolbar. This is the old way of detecting mouse enter events; although it will still work, you should use the EVT_TOOL_ENTER() macro instead. @param toolId Greater than -1 if the mouse cursor has moved into the tool, or -1 if the mouse cursor has moved. The programmer can override this to provide extra information about the tool, such as a short description on the status line. @remarks With some derived toolbar classes, if the mouse moves quickly out of the toolbar, wxWidgets may not be able to detect it. Therefore this function may not always be called when expected. */ virtual void OnMouseEnter(int toolId); /** @deprecated This is the old way of detecting tool right clicks; although it will still work, you should use the EVT_TOOL_RCLICKED() macro instead. Called when the user clicks on a tool with the right mouse button. The programmer should override this function to detect right tool clicks. @param toolId The identifier passed to AddTool(). @param x The x position of the mouse cursor. @param y The y position of the mouse cursor. @remarks A typical use of this member might be to pop up a menu. @see OnMouseEnter(), OnLeftClick() */ virtual void OnRightClick(int toolId, long x, long y); /** This function should be called after you have added tools. */ virtual bool Realize(); /** Removes the given tool from the toolbar but doesn't delete it. This allows to insert/add this tool back to this (or another) toolbar later. @note It is unnecessary to call Realize() for the change to take place, it will happen immediately. @see DeleteTool() */ virtual wxToolBarToolBase* RemoveTool(int id); /** Sets the bitmap resource identifier for specifying tool bitmaps as indices into a custom bitmap. Windows CE only. */ void SetBitmapResource(int resourceId); /** Sets the dropdown menu for the tool given by its @e id. The tool itself will delete the menu when it's no longer needed. Only supported under GTK+ und MSW. If you define a EVT_TOOL_DROPDOWN() handler in your program, you must call wxEvent::Skip() from it or the menu won't be displayed. */ bool SetDropdownMenu(int id, wxMenu* menu); //@{ /** Set the values to be used as margins for the toolbar. @param x Left margin, right margin and inter-tool separation value. @param y Top margin, bottom margin and inter-tool separation value. @remarks This must be called before the tools are added if absolute positioning is to be used, and the default (zero-size) margins are to be overridden. @see GetMargins() */ virtual void SetMargins(int x, int y); /** Set the margins for the toolbar. @param size Margin size. @remarks This must be called before the tools are added if absolute positioning is to be used, and the default (zero-size) margins are to be overridden. @see GetMargins(), wxSize */ void SetMargins(const wxSize& size); //@} /** Sets the default size of each tool bitmap. The default bitmap size is 16 by 15 pixels. @param size The size of the bitmaps in the toolbar. @remarks This should be called to tell the toolbar what the tool bitmap size is. Call it before you add tools. @see GetToolBitmapSize(), GetToolSize() */ virtual void SetToolBitmapSize(const wxSize& size); /** Sets the client data associated with the tool. */ virtual void SetToolClientData(int id, wxObject* clientData); /** Sets the bitmap to be used by the tool with the given ID when the tool is in a disabled state. This can only be used on Button tools, not controls. @note The native toolbar classes on the main platforms all synthesize the disabled bitmap from the normal bitmap, so this function will have no effect on those platforms. */ virtual void SetToolDisabledBitmap(int id, const wxBitmap& bitmap); /** Sets the long help for the given tool. @param toolId The tool in question. @param helpString A string for the long help. @remarks You might use the long help for displaying the tool purpose on the status line. @see GetToolLongHelp(), SetToolShortHelp(), */ virtual void SetToolLongHelp(int toolId, const wxString& helpString); /** Sets the bitmap to be used by the tool with the given ID. This can only be used on Button tools, not controls. */ virtual void SetToolNormalBitmap(int id, const wxBitmap& bitmap); /** Sets the value used for spacing tools. The default value is 1. @param packing The value for packing. @remarks The packing is used for spacing in the vertical direction if the toolbar is horizontal, and for spacing in the horizontal direction if the toolbar is vertical. @see GetToolPacking() */ virtual void SetToolPacking(int packing); /** Sets the default separator size. The default value is 5. @param separation The separator size. @see AddSeparator() */ virtual void SetToolSeparation(int separation); /** Sets the short help for the given tool. @param toolId The tool in question. @param helpString The string for the short help. @remarks An application might use short help for identifying the tool purpose in a tooltip. @see GetToolShortHelp(), SetToolLongHelp() */ virtual void SetToolShortHelp(int toolId, const wxString& helpString); /** Toggles a tool on or off. This does not cause any event to get emitted. @param toolId Tool in question. @param toggle If @true, toggles the tool on, otherwise toggles it off. @remarks Only applies to a tool that has been specified as a toggle tool. */ virtual void ToggleTool(int toolId, bool toggle); };