From 509cd921bf977d4186d59b612784b982863054ad Mon Sep 17 00:00:00 2001 From: Vadim Zeitlin Date: Thu, 24 May 2001 00:02:21 +0000 Subject: [PATCH] some minor fixes to ODBC docs git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@10299 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775 --- docs/latex/wx/category.tex | 48 ++++++++++++++++++++++++++------------ docs/latex/wx/tdb.tex | 33 +++++++++++++------------- 2 files changed, 50 insertions(+), 31 deletions(-) diff --git a/docs/latex/wx/category.tex b/docs/latex/wx/category.tex index ae3be1f878..8dcc3c157c 100644 --- a/docs/latex/wx/category.tex +++ b/docs/latex/wx/category.tex @@ -400,6 +400,7 @@ overview}{wxfileoverview} for more details. \begin{twocollist}\itemsep=0pt \twocolitem{\helpref{wxDir}{wxdir}}{Class for enumerating files/subdirectories.} +\twocolitem{\helpref{wxDirTraverser}{wxdirtraverser}}{Class used together with wxDir for recursively enumerating the files/subdirectories} \twocolitem{\helpref{wxFile}{wxfile}}{Low-level file input/output class.} \twocolitem{\helpref{wxFFile}{wxffile}}{Another low-level file input/output class.} \twocolitem{\helpref{wxTempFile}{wxtempfile}}{Class to safely replace an existing file} @@ -494,6 +495,38 @@ used internally by the HTML classes. \twocolitem{\helpref{wxToolTip}{wxtooltip}}{Class implementing tooltips} \end{twocollist} +{\large {\bf Database classes}} + +\overview{Database classes overview}{odbcoverview} + +wxWindows provides two alternative sets of classes for accessing Microsoft's ODBC (Open Database Connectivity) +product. The new version by Remstar, known as wxODBC, is more powerful, +portable, flexible and better supported, so please use the classes below for +working with databases: + +\begin{twocollist}\itemsep=0pt +\twocolitem{\helpref{wxDb}{wxdb}}{ODBC database connection} +\twocolitem{\helpref{wxDbTable}{wxdbtable}}{Provides access to a database table} +\twocolitem{\helpref{wxDbInf}{wxdbinf}}{} +\twocolitem{\helpref{wxDbTableInf}{wxdbtableinf}}{} +\twocolitem{\helpref{wxDbColDef}{wxdbcoldef}}{} +\twocolitem{\helpref{wxDbColInf}{wxdbcolinf}}{} +\twocolitem{\helpref{wxDbColDatatr}{wxdbcoldatatr}}{} +\twocolitem{\helpref{wxDbColFor}{wxdbcolfor}}{} +\twocolitem{\helpref{wxDbConnectInf}{wxdbconnectinf}}{} +\twocolitem{\helpref{wxDbIdxDef}{wxdbidxdef}}{} +\end{twocollist} + +The documentation for the older classes is still included, but you should avoid +using any of them in the new programs: + +\begin{twocollist}\itemsep=0pt +\twocolitem{\helpref{wxDatabase}{wxdatabase}}{Database class} +\twocolitem{\helpref{wxQueryCol}{wxquerycol}}{Class representing a column} +\twocolitem{\helpref{wxQueryField}{wxqueryfield}}{Class representing a field} +\twocolitem{\helpref{wxRecordSet}{wxrecordset}}{Class representing one or more record} +\end{twocollist} + {\large {\bf Miscellaneous}} \begin{twocollist}\itemsep=0pt @@ -516,18 +549,3 @@ used internally by the HTML classes. \twocolitem{\helpref{wxQuantize}{wxquantize}}{Class to perform quantization, or colour reduction} \end{twocollist} -{\large {\bf Database classes}} - -\overview{Database classes overview}{odbcoverview} - -wxWindows provides two alternative sets of classes for accessing Microsoft's ODBC (Open Database Connectivity) -product. The new version by Remstar is documented in a separate manual. -The older classes are as follows: - -\begin{twocollist}\itemsep=0pt -\twocolitem{\helpref{wxDatabase}{wxdatabase}}{Database class} -\twocolitem{\helpref{wxQueryCol}{wxquerycol}}{Class representing a column} -\twocolitem{\helpref{wxQueryField}{wxqueryfield}}{Class representing a field} -\twocolitem{\helpref{wxRecordSet}{wxrecordset}}{Class representing one or more record} -\end{twocollist} - diff --git a/docs/latex/wx/tdb.tex b/docs/latex/wx/tdb.tex index c2a51164fc..ccb661585d 100644 --- a/docs/latex/wx/tdb.tex +++ b/docs/latex/wx/tdb.tex @@ -55,6 +55,8 @@ users have successfully used the classes with the following datasources: \item INFORMIX \item VIRTUOSO \item DB2 +\item Interbase +\item Pervasive SQL \end{itemize} An up-to-date list can be obtained by looking in the comments of the function @@ -283,17 +285,17 @@ The wxWindows setup.h file has several settings in it pertaining to compiling the wxODBC classes. \begin{twocollist}\itemsep=0pt -\twocolitem{wxUSE_ODBC}{This must be set to 1 in order for the compiler to +\twocolitem{wxUSE\_ODBC}{This must be set to 1 in order for the compiler to compile the wxODBC classes. Without setting this to 1, there will be no access to any of the wxODBC classes. The default is 0.} -\twocolitem{wxODBC_FWD_ONLY_CURSORS}{When a new database connection is +\twocolitem{wxODBC\_FWD\_ONLY\_CURSORS}{When a new database connection is requested, this setting controls the default of whether the connection allows only forward scrolling cursors, or forward and backward scrolling cursors (see the section in "WHERE TO START" on cursors for more information on cursors). This default can be overridden by passing a second parameter to either the \helpref{wxDbGetConnection}{wxdbfunctions} or \helpref{wxDb constructor}{wxdbconstr}. The default is 1.} -\twocolitem{wxODBC_BACKWARD_COMPATABILITY}{Between v2.0 and 2.2, massive +\twocolitem{wxODBC\_BACKWARD\_COMPATABILITY}{Between v2.0 and 2.2, massive renaming efforts were done to the ODBC classes to get naming conventions similar to those used throughout wxWindows, as well as to preface all wxODBC classes names and functions with a wxDb preface. Because this renaming would @@ -523,7 +525,7 @@ queried, rather than re-querying the datasource for all those same settings. One final note on creating a connection. When a connection is created, it will default to only allowing cursor scrolling to be either forward only, or both backward and forward scrolling cursors. The default behavior is -determined by the setting "wxODBC_FWD_ONLY_CURSORS" in setup.h when you +determined by the setting {\tt wxODBC\_FWD\_ONLY\_CURSORS} in setup.h when you compile the wxWindows library. The library default is to only support forward scrolling cursors only, though this can be overridden by parameters for wxDb() constructor or the \helpref{wxDbGetConnection}{wxdbfunctions} @@ -564,11 +566,11 @@ connecting to the datasource. Each of the above parameters are described in detail in the wxDbTable class' description, but one special note here about the fifth parameter - queryOnly setting. If a wxDbTable instance is created as -wxDB_QUERY_ONLY, then no inserts/deletes/updates are able to be performed +{\tt wxDB\_QUERY\_ONLY}, then no inserts/deletes/updates are able to be performed using this instance of the wxDbTable. Any calls to \helpref{wxDb::CommitTrans}{wxdbcommittrans} or \helpref{wxDb::RollbackTrans}{wxdbrollbacktrans} against the datasource connection used by this wxDbTable instance are ignored by this instance. If -the wxDbTable instance is created with "!wxDB_QUERY_ONLY" as shown above, +the wxDbTable instance is created with {\tt !wxDB\_QUERY\_ONLY} as shown above, then all the cursors and other overhead associated with being able to insert/update/delete data in the table are created, and thereby those operations can then be performed against the associated table with this @@ -615,7 +617,7 @@ variables contain valid data. It is not necessary to define column definitions for columns whose data is not going to be returned to the client. For example, if you want to query the datasource for all users with a first name of 'GEORGE', but you only want -the list of last names associated with those rows (why return the FIRST_NAME +the list of last names associated with those rows (why return the FIRST\_NAME column every time when you already know it is 'GEORGE'), you would only have needed to define one column above. @@ -632,7 +634,7 @@ house keeping of checking that the specified table exists, that the current connected user has at least SELECT privileges for accessing the table, setting up the requisite cursors, binding columns and cursors, and constructing the default INSERT statement that is used when a new row is -inserted into the table (non-wxDB_QUERY_ONLY tables only). +inserted into the table (non-wxDB\_QUERY\_ONLY tables only). \begin{verbatim} if (!table->Open()) @@ -671,11 +673,11 @@ it where to get the data from, and in what sequence we want the data returned. \end{verbatim} The above lines will be used to tell the datasource to return in the result -all the rows in the table whose column "FIRST_NAME" contains the name +all the rows in the table whose column "FIRST\_NAME" contains the name 'GEORGE' (note the required use of the single quote around the string literal) and that the result set will return the rows sorted by ascending last names (ascending is the default, and can be overridden with the -"DESC" keyword for datasources that support it - "LAST_NAME DESC"). +"DESC" keyword for datasources that support it - "LAST\_NAME DESC"). Specifying a blank WHERE clause will result in the result set containing all rows in the datasource. @@ -907,7 +909,7 @@ NOTE: dBase is not a true ODBC datasource. You only have access to as much functionality as the driver can emulate. \begin{itemize}\itemsep=0pt -\item Does not support the SQL_TIMESTAMP structure +\item Does not support the SQL\_TIMESTAMP structure \item Supports only one cursor and one connect (apparently? with Microsoft driver only?) \item Does not automatically create the primary index if the 'keyField' param of SetColDef is TRUE. The user must create ALL indexes from their program with calls to \helpref{wxDbTable::CreateIndex}{wxdbtablecreateindex} \item Table names can only be 8 characters long @@ -928,7 +930,7 @@ functionality as the driver can emulate. \item Maximum row size is somewhere in the neighborhood of 1920 bytes \end{itemize} -{\it MY_SQL} +{\it mySQL} \begin{itemize}\itemsep=0pt \item If a column is part of the Primary Key, the column cannot be NULL. \item Cannot support selecting for update [\helpref{wxDbTable::CanSelectForUpdate}{wxdbtablecanselectforupdate}]. Always returns FALSE. @@ -950,10 +952,9 @@ functionality as the driver can emulate. {\bf UNICODE with wxODBC classes} -Currently there is no support for Unicode with the wxODBC classes. In -fact, Unicode builds must be disabled if wxWindows is compiled with -wxUSE_ODBC set to 1 in setup.h - +The ODBC classes support for Unicode is yet in early experimental stage and +hasn't been tested extensively. It might work for you or it might not: please +report the bugs/problems you have encountered in the latter case. \subsection{wxODBC - Sample Code #1}\label{wxodbcsamplecode1}