diff --git a/wxPython/docs/BUILD.txt b/wxPython/docs/BUILD.txt index 1b59bc8a69..3c39147310 100644 --- a/wxPython/docs/BUILD.txt +++ b/wxPython/docs/BUILD.txt @@ -5,7 +5,7 @@ This file describes how I build wxWidgets and wxPython while doing development and testing, and is meant to help other people that want to do the same thing. I'll assume that you are using either a CVS snapshot from http://wxWidgets.org/snapshots/, a checkout from CVS, or -one of the released wxPythonSrc-2.5.* tarballs. I'll also assume that +one of the released wxPython-src-2.5.* tarballs. I'll also assume that you know your way around your system, the compiler, etc. and most importantly, that you know what you are doing! ;-) @@ -21,31 +21,31 @@ may already have installed. .. _INSTALL: INSTALL.html .. _BUILD: BUILD.html -If you want to make changes to any of the ``*.i`` files, (SWIG interface -definition files,) or to regenerate the extension sources or renamer -modules, then you will need an up to date version of SWIG. Either get -and build the current CVS version, or version 1.3.20, and then apply -the patches in wxPython/SWIG. See the README.txt in that dir for -details about each patch and also info about those that may already -have been applied to the SWIG sources. If you install this build of -SWIG to a location that is not on the PATH (so it doesn't interfere -with an existing SWIG install for example) then you can set a setup.py -command-line variable named SWIG to be the full path name of the -executable and the wxPython build will use it. See below for an -example. +If you want to make changes to any of the ``*.i`` files, (SWIG +interface definition files,) or to regenerate the extension sources or +renamer modules, then you will need an up to date version of SWIG, +plus some patches. Get the sources for version 1.3.22, and then apply +the patches in wxPython/SWIG and then build SWIG like normal. See the +README.txt in the wxPython/SWIG dir for details about each patch and +also info about those that may already have been applied to the SWIG +sources. If you install this build of SWIG to a location that is not +on the PATH (so it doesn't interfere with an existing SWIG install for +example) then you can set a setup.py command-line variable named SWIG +to be the full path name of the executable and the wxPython build will +use it. See below for an example. In the text below I'll use WXDIR with environment variable syntax -(either $WXDIR or %WXDIR%) to refer to the top level directory were +(either $WXDIR or %WXDIR%) to refer to the top level directory where your wxWidgerts and wxPython sources are located. It will equate to whereever you checked out the wxWidgets module from CVS, or untarred -the wxPythonSrc tarball to. You can either substitute the $WXDIR text +the wxPython-src tarball to. You can either substitute the $WXDIR text below with your actual dir, or set the value in the environment and use it just like you see it below. If you run into what appears to be compatibility issues between wxWidgets and wxPython while building wxPython, be sure you are using -the wxWidgets sources included with the wxPythonSrc tarball or the CVS -snapshot, and not a previously installed version or a version +the wxWidgets sources included with the wxPython-src tarball or the +CVS snapshot, and not a previously installed version or a version installed from one of the standard wxWidgets installers. With the "unstable" releases (have a odd-numbered minor release value, where the APIs are allowed to change) there are often significant @@ -86,23 +86,28 @@ place, then do the same for wxPython. On OS X of course you'll want to use --with-mac instead of --with-gtk. - **NOTE**: Due to a recent change there is a dependency problem in the - multilib builds of wxWidgets on OSX, so I have switched to a - monolithic build on that platform. (IOW, all of the core code in - one shared library instead of several.) I would also expect other - unix builds to do just fine with a monolithic library, but I havn't - tested it in a while so your mileage may vary. Anyway, to switch + **NOTE**: Due to a recent change there is currently a dependency + problem in the multilib builds of wxWidgets on OSX, so I have + switched to using a monolithic build. That means that all of the + core wxWidgets code is placed in in one shared library instead of + several. wxPython can be used with either mode, so use whatever + suits you on Linux and etc. but use monolithic on OSX. To switch to the monolithic build of wxWidgets just add this configure flag:: --enable-monolithic \ - By default GTK2 will be selected if it is on your build system. To - force the use of GTK 1.2.x add this flag:: + By default GTK2 will be selected if its development pacakge is + installed on your build system. To force the use of GTK 1.2.x + instead add this flag:: --disable-gtk2 \ - To make the wxWidgets build be Unicode enabled (strongly - recommended if you are building with GTK2) then add:: + To make the wxWidgets build be unicode enabled (strongly + recommended if you are building with GTK2) then add the following. + When wxPython is unicode enabled then all strings that are passed + to wx functions and methods will first be converted to unicode + objects, and any 'strings' returned from wx functions and methods + will actually be unicode objects.:: --enable-unicode \ @@ -137,8 +142,7 @@ place, then do the same for wxPython. make $* \ && make -C contrib/src/gizmos $* \ && make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" $* \ - && make -C contrib/src/stc $* \ - && make -C contrib/src/xrc $* + && make -C contrib/src/stc $* So you just use .make as if it where make, but don't forget to set the execute bit on .make first!:: @@ -268,6 +272,13 @@ of the code with the debugger then building the normal (or hybrid) version is fine, and you can use the regular python executables with it. +Starting with 2.5.3.0 wxPython can be built for either the monlithic +or the multi-lib wxWidgets builds. (Monolithic means that all the +core wxWidgets code is in one DLL, and multi-lib means that the core +code is divided into multiple DLLs.) To select which one to use +specify the MONOLITHIC flag for both the wxWidgets build and the +wxPython build as shown below, setting it to either 0 or 1. + Just like the unix versions I also use some scripts to help me build wxWidgets, but I use some non-standard stuff to do it. So if you have bash (cygwin or probably MSYS too) or 4NT plus unix-like cat and sed @@ -361,7 +372,7 @@ accordingly if you are using the bash shell. executing nmake with a bunch of extra command line parameters. The base set are:: - -f makefile.vc OFFICIAL_BUILD=1 SHARED=1 MONOLITHIC=0 USE_OPENGL=1 + -f makefile.vc OFFICIAL_BUILD=1 SHARED=1 MONOLITHIC=1 USE_OPENGL=1 If doing a debug build then add:: @@ -381,7 +392,6 @@ accordingly if you are using the bash shell. contrib libraries:: %WXDIR%\contrib\build\gizmos - %WXDIR%\contrib\build\xrc %WXDIR%\contrib\build\stc %WXDIR%\contrib\build\ogl @@ -404,10 +414,11 @@ accordingly if you are using the bash shell. Change to the %WXDIR%\\wxPython dir and run the this command, making sure that you use the version of python that you want to - build for (if you have more than one on your system):: + build for (if you have more than one on your system) and to match + the MONOLITHIC flag with how you built wxWidgets:: cd %WXDIR%\wxPython - python setup.py build_ext --inplace + python setup.py build_ext --inplace MONOLITHIC=1 If you are wanting to have the source files regenerated with swig, then you need to turn on the USE_SWIG flag and optionally tell it diff --git a/wxPython/docs/INSTALL.txt b/wxPython/docs/INSTALL.txt index c8c16923e4..eaa7e3e2da 100644 --- a/wxPython/docs/INSTALL.txt +++ b/wxPython/docs/INSTALL.txt @@ -112,9 +112,9 @@ instructions above, except for a few small, but important details: you do yourself will end up in /Library/Frameworks even on Panther... -3. You need to use pythonw at the command line or PythonLauncher app - to run wxPython apps, otherwise the app will not be able to fully - use the GUI display. +3. You need to use pythonw at the command line or the PythonLauncher + app to run wxPython apps, otherwise the app will not be able to + fully use the GUI display. diff --git a/wxPython/docs/MigrationGuide.txt b/wxPython/docs/MigrationGuide.txt index 572324dace..d93ad9b85f 100644 --- a/wxPython/docs/MigrationGuide.txt +++ b/wxPython/docs/MigrationGuide.txt @@ -786,6 +786,7 @@ The help module no longer exists and the classes therein are now part of the core module imported with wxPython.wx or the wx package. + wx.TaskBarIcon -------------- @@ -821,9 +822,76 @@ and the MainLoop will not exit. +Version Number Change +--------------------- -Other Stuff ------------ +**[Changed in 2.5.3.x]** + +Starting with 2.5.3.0 the Unicode versions of wxPython will no longer +have a 'u' appended to the fourth component of the version number. +Please check for the presence of "unicode" in the `wx.PlatformInfo` +tuple instead. (This tuple of strings has been available since the +first 2.5 version.) For example:: + + if "unicode" in wx.PlatformInfo: + # do whatever + ... + + + + +Multi-Version Installs +---------------------- + +**[Changed in 2.5.3.x]** + +Starting with 2.5.3.0 the wx and wxPython pacakge directories will be +installed in a subdirectory of the site-packages directory, instead of +directly in site-pacakges. This is done to help facilitate having +multiple versions of wxPython installed side-by-side. Why would you +want to do this? One possible scenario is you have an app that +requires wxPython 2.4 but you want to use the newest 2.5 to do your +development with. Or perhaps you want to be able to test your app +with several different versions of wxPython to ensure compatibility. +Before everyone panics, rest asured that if you only install one +version of wxPython then you should notice no difference in how +things work. + +In addition to installing wxPython into a "versioned" subdirectory of +site-packages, a file named `wx.pth` is optionally installed that will +contain the name of the versioned subdirectory. This will cause that +subdirectory to be automatically added to the sys.path and so doing an +"import wx" will find the package in the subdirectory like like it +would have if it was still located directly in site-packages. I say +"optionally" above because that is how you can control which install +of wxPython is the default one. Which ever version installs the +wx.pth file will be the one that is imported with a plain "import wx" +statement. Of course you can always manipulate that by editing the +wx.pth file, or by setting PYTHONPATH in the environment, or by the +method described in the next paragraph. + +Finally, a new module named wxversion.py is installed to the +site-pacakges directory. It can be used to manipulate the sys.path at +runtime so your applications can select which version of wxPython they +would like to to have imported. You use it like this:: + + import wxversion + wxversion.require("2.4") + import wx + +Then eventhough a 2.5 version of wxPython may be the default the +application that does the above the first time that wx is imported +will actually get a 2.4 version. **NOTE:** There isn't actually a 2.4 +version of wxPython that supports this, but there will be. + +Please see this wiki page for more details, HowTo's and FAQ's: +http://wiki.wxpython.org/index.cgi/MultiVersionInstalls + + + + +Miscellaneous Stuff +------------------- wxPyDefaultPosition and wxPyDefaultSize are gone. Use the wxDefaultPosition and wxDefaultSize objects instead.