cheng/mpir
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a5859040cf
mpir/tests/Makefile.in
jasonmoxham 19747946b0 autoreconf
2010-07-22 16:14:13 +00:00

1110 lines
38 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at your
# option) any later version.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with the GNU MP Library; see the file COPYING.LIB. If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.
# Copyright 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation,
# Inc.
#
# Copyright 2008 William Hart
#
# This file is part of the MPIR Library.
#
# The MPIR Library is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at your
# option) any later version.
#
# The MPIR Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with the MPIR Library; see the file COPYING.LIB. If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/../mpn/Makeasm.am $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
check_PROGRAMS = t-bswap$(EXEEXT) t-constants$(EXEEXT) \
t-count_zeros$(EXEEXT) t-gmpmax$(EXEEXT) t-hightomask$(EXEEXT) \
t-modlinv$(EXEEXT) t-popc$(EXEEXT) t-parity$(EXEEXT) \
t-sub$(EXEEXT)
subdir = tests
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__DEPENDENCIES_1 =
am_libtests_la_OBJECTS = memory.lo misc.lo refmpf.lo refmpn.lo \
refmpq.lo refmpz.lo spinner.lo trace.lo
libtests_la_OBJECTS = $(am_libtests_la_OBJECTS)
t_bswap_SOURCES = t-bswap.c
t_bswap_OBJECTS = t-bswap.$(OBJEXT)
t_bswap_LDADD = $(LDADD)
t_bswap_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_constants_SOURCES = t-constants.c
t_constants_OBJECTS = t-constants.$(OBJEXT)
t_constants_LDADD = $(LDADD)
t_constants_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_count_zeros_SOURCES = t-count_zeros.c
t_count_zeros_OBJECTS = t-count_zeros.$(OBJEXT)
t_count_zeros_LDADD = $(LDADD)
t_count_zeros_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_gmpmax_SOURCES = t-gmpmax.c
t_gmpmax_OBJECTS = t-gmpmax.$(OBJEXT)
t_gmpmax_LDADD = $(LDADD)
t_gmpmax_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_hightomask_SOURCES = t-hightomask.c
t_hightomask_OBJECTS = t-hightomask.$(OBJEXT)
t_hightomask_LDADD = $(LDADD)
t_hightomask_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_modlinv_SOURCES = t-modlinv.c
t_modlinv_OBJECTS = t-modlinv.$(OBJEXT)
t_modlinv_LDADD = $(LDADD)
t_modlinv_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_parity_SOURCES = t-parity.c
t_parity_OBJECTS = t-parity.$(OBJEXT)
t_parity_LDADD = $(LDADD)
t_parity_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_popc_SOURCES = t-popc.c
t_popc_OBJECTS = t-popc.$(OBJEXT)
t_popc_LDADD = $(LDADD)
t_popc_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
t_sub_SOURCES = t-sub.c
t_sub_OBJECTS = t-sub.$(OBJEXT)
t_sub_LDADD = $(LDADD)
t_sub_DEPENDENCIES = libtests.la $(top_builddir)/libmpir.la
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(libtests_la_SOURCES) $(EXTRA_libtests_la_SOURCES) \
t-bswap.c t-constants.c t-count_zeros.c t-gmpmax.c \
t-hightomask.c t-modlinv.c t-parity.c t-popc.c t-sub.c
DIST_SOURCES = $(libtests_la_SOURCES) $(EXTRA_libtests_la_SOURCES) \
t-bswap.c t-constants.c t-count_zeros.c t-gmpmax.c \
t-hightomask.c t-modlinv.c t-parity.c t-popc.c t-sub.c
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
check check-html recheck recheck-html distdir
ETAGS = etags
CTAGS = ctags
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
# Restructured Text title and section.
am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//'
am__rst_section = sed 'p;s/./=/g;p;g'
# Put stdin (possibly several lines separated by ". ") in a box.
am__text_box = $(AWK) '{ \
n = split($$0, lines, "\\. "); max = 0; \
for (i = 1; i <= n; ++i) \
if (max < length(lines[i])) \
max = length(lines[i]); \
for (i = 0; i < max; ++i) line = line "="; \
print line; \
for (i = 1; i <= n; ++i) if (lines[i]) print lines[i];\
print line; \
}'
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL). This contradicts POSIX. Work around the problem
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log, and passes
# TESTS_ENVIRONMENT. Save and restore TERM around use of
# TESTS_ENVIRONMENT, in case that unsets it.
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
srcdir=$(srcdir); export srcdir; \
rm -f $@-t; \
trap 'st=$$?; rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st' \
1 2 13 15; \
am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \
$(TESTS_ENVIRONMENT)
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
$(TEST_LOG_FLAGS)
TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ABI = @ABI@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITS_PER_MP_LIMB = @BITS_PER_MP_LIMB@
CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
CC = @CC@
CCAS = @CCAS@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPP_FOR_BUILD = @CPP_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
DEFS = @DEFS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
F77 = @F77@
FFLAGS = @FFLAGS@
FGREP = @FGREP@
GMP_CC = @GMP_CC@
GMP_CFLAGS = @GMP_CFLAGS@
GMP_LDFLAGS = @GMP_LDFLAGS@
GMP_NAIL_BITS = @GMP_NAIL_BITS@
GREP = @GREP@
GSYM_FLAG = @GSYM_FLAG@
HAVE_HOST_CPU_FAMILY_power = @HAVE_HOST_CPU_FAMILY_power@
HAVE_HOST_CPU_FAMILY_powerpc = @HAVE_HOST_CPU_FAMILY_powerpc@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
LIBGMP_DLL = @LIBGMP_DLL@
LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
LIBM = @LIBM@
LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MPIR_AS = @MPIR_AS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_FORMAT = @OBJECT_FORMAT@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
STRIP = @STRIP@
TAL_OBJECT = @TAL_OBJECT@
TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
U_FOR_BUILD = @U_FOR_BUILD@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_F77 = @ac_ct_F77@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gmp_srclinks = @gmp_srclinks@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
mpn_objects = @mpn_objects@
mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = . devel mpn mpz mpq mpf rand misc cxx
# COMPILE minus CC.
#
COMPILE_FLAGS = $(DEFS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(INCLUDES) $(DEFAULT_INCLUDES)
# Flags used for preprocessing (in ansi2knr rules).
#
PREPROCESS_FLAGS = $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS)
# Recent versions of automake (1.5 and up for instance) append automake
# generated suffixes to this $(SUFFIXES) list. This is essential for us,
# since .c must come after .s, .S and .asm. If .c is before .s, for
# instance, then in the mpn directory "make" will see add_n.c mentioned in
# an explicit rule (the ansi2knr stuff) and decide it must have add_n.c,
# even if add_n.c doesn't exist but add_n.s does. See GNU make
# documentation "(make)Implicit Rule Search", part 5c.
#
# On IRIX 6 native make this doesn't work properly though. Somehow .c
# remains ahead of .s, perhaps because .c.s is a builtin rule. .asm works
# fine though, and mpn/mips3 uses this.
#
SUFFIXES = .s .S .as .asm
# can be overridden during development, eg. "make RM_TMP=: mul_1.lo"
RM_TMP = rm -f
INCLUDES = -I$(top_srcdir)
LDADD = libtests.la $(top_builddir)/libmpir.la
check_LTLIBRARIES = libtests.la
EXTRA_libtests_la_SOURCES = x86_64call.as x86_64check.c x86call.asm x86check.c
libtests_la_SOURCES = tests.h \
memory.c misc.c refmpf.c refmpn.c refmpq.c refmpz.c spinner.c trace.c
libtests_la_DEPENDENCIES = @CALLING_CONVENTIONS_OBJS@
libtests_la_LIBADD = $(libtests_la_DEPENDENCIES) $(top_builddir)/libmpir.la
TESTS = $(check_PROGRAMS)
all: all-recursive
.SUFFIXES:
.SUFFIXES: .s .S .as .asm .c .html .lo .log .o .obj .test .test$(EXEEXT)
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../mpn/Makeasm.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps tests/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu --ignore-deps tests/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
clean-checkLTLIBRARIES:
-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
@list='$(check_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libtests.la: $(libtests_la_OBJECTS) $(libtests_la_DEPENDENCIES)
$(LINK) $(libtests_la_OBJECTS) $(libtests_la_LIBADD) $(LIBS)
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
t-bswap$(EXEEXT): $(t_bswap_OBJECTS) $(t_bswap_DEPENDENCIES)
@rm -f t-bswap$(EXEEXT)
$(LINK) $(t_bswap_OBJECTS) $(t_bswap_LDADD) $(LIBS)
t-constants$(EXEEXT): $(t_constants_OBJECTS) $(t_constants_DEPENDENCIES)
@rm -f t-constants$(EXEEXT)
$(LINK) $(t_constants_OBJECTS) $(t_constants_LDADD) $(LIBS)
t-count_zeros$(EXEEXT): $(t_count_zeros_OBJECTS) $(t_count_zeros_DEPENDENCIES)
@rm -f t-count_zeros$(EXEEXT)
$(LINK) $(t_count_zeros_OBJECTS) $(t_count_zeros_LDADD) $(LIBS)
t-gmpmax$(EXEEXT): $(t_gmpmax_OBJECTS) $(t_gmpmax_DEPENDENCIES)
@rm -f t-gmpmax$(EXEEXT)
$(LINK) $(t_gmpmax_OBJECTS) $(t_gmpmax_LDADD) $(LIBS)
t-hightomask$(EXEEXT): $(t_hightomask_OBJECTS) $(t_hightomask_DEPENDENCIES)
@rm -f t-hightomask$(EXEEXT)
$(LINK) $(t_hightomask_OBJECTS) $(t_hightomask_LDADD) $(LIBS)
t-modlinv$(EXEEXT): $(t_modlinv_OBJECTS) $(t_modlinv_DEPENDENCIES)
@rm -f t-modlinv$(EXEEXT)
$(LINK) $(t_modlinv_OBJECTS) $(t_modlinv_LDADD) $(LIBS)
t-parity$(EXEEXT): $(t_parity_OBJECTS) $(t_parity_DEPENDENCIES)
@rm -f t-parity$(EXEEXT)
$(LINK) $(t_parity_OBJECTS) $(t_parity_LDADD) $(LIBS)
t-popc$(EXEEXT): $(t_popc_OBJECTS) $(t_popc_DEPENDENCIES)
@rm -f t-popc$(EXEEXT)
$(LINK) $(t_popc_OBJECTS) $(t_popc_LDADD) $(LIBS)
t-sub$(EXEEXT): $(t_sub_OBJECTS) $(t_sub_DEPENDENCIES)
@rm -f t-sub$(EXEEXT)
$(LINK) $(t_sub_OBJECTS) $(t_sub_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(COMPILE) -c $<
.c.obj:
$(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
# To be appended to the command running the test. Handle the stdout
# and stderr redirection, and catch the exit status.
am__check_post = \
>$@-t 2>&1; \
estatus=$$?; \
if test -n '$(DISABLE_HARD_ERRORS)' \
&& test $$estatus -eq 99; then \
estatus=1; \
fi; \
TERM=$$__SAVED_TERM; export TERM; \
$(am__tty_colors); \
xfailed=PASS; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
xfailed=XFAIL;; \
esac; \
case $$estatus:$$xfailed in \
0:XFAIL) col=$$red; res=XPASS;; \
0:*) col=$$grn; res=PASS ;; \
77:*) col=$$blu; res=SKIP ;; \
99:*) col=$$red; res=FAIL ;; \
*:XFAIL) col=$$lgn; res=XFAIL;; \
*:*) col=$$red; res=FAIL ;; \
esac; \
echo "$${col}$$res$${std}: $$f"; \
echo "$$res: $$f (exit: $$estatus)" | \
$(am__rst_section) >$@; \
cat $@-t >>$@; \
rm -f $@-t
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__sh_e_setup); \
list='$(TEST_LOGS)'; \
results=`for f in $$list; do \
read line < $$f && echo "$$line" || echo FAIL; \
done`; \
all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[ ]*//'`; \
fail=`echo "$$results" | grep -c '^FAIL'`; \
pass=`echo "$$results" | grep -c '^PASS'`; \
skip=`echo "$$results" | grep -c '^SKIP'`; \
xfail=`echo "$$results" | grep -c '^XFAIL'`; \
xpass=`echo "$$results" | grep -c '^XPASS'`; \
failures=`expr $$fail + $$xpass`; \
all=`expr $$all - $$skip`; \
if test "$$all" -eq 1; then tests=test; All=; \
else tests=tests; All="All "; fi; \
case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \
fail=0:xpass=0:xfail=0) \
msg="$$All$$all $$tests passed. "; \
exit=true;; \
fail=0:xpass=0:xfail=*) \
msg="$$All$$all $$tests behaved as expected"; \
if test "$$xfail" -eq 1; then xfailures=failure; \
else xfailures=failures; fi; \
msg="$$msg ($$xfail expected $$xfailures). "; \
exit=true;; \
fail=*:xpass=0:xfail=*) \
msg="$$fail of $$all $$tests failed. "; \
exit=false;; \
fail=*:xpass=*:xfail=*) \
msg="$$failures of $$all $$tests did not behave as expected"; \
if test "$$xpass" -eq 1; then xpasses=pass; \
else xpasses=passes; fi; \
msg="$$msg ($$xpass unexpected $$xpasses). "; \
exit=false;; \
*) \
echo >&2 "incorrect case"; exit 4;; \
esac; \
if test "$$skip" -ne 0; then \
if test "$$skip" -eq 1; then \
msg="$$msg($$skip test was not run). "; \
else \
msg="$$msg($$skip tests were not run). "; \
fi; \
fi; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
echo "$$msg"; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for f in $$list; do \
read line < $$f; \
case $$line in \
PASS:*|XFAIL:*);; \
*) echo; cat $$f;; \
esac; \
done; \
} >$(TEST_SUITE_LOG).tmp; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if test "$$failures" -ne 0; then \
msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \
fi; \
fi; \
test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \
$(am__tty_colors); \
if $$exit; then \
echo $(ECHO_N) "$$grn$(ECHO_C)"; \
else \
echo $(ECHO_N) "$$red$(ECHO_C)"; \
fi; \
echo "$$msg" | $(am__text_box); \
echo $(ECHO_N) "$$std$(ECHO_C)"; \
$$exit
# Run all the tests.
check-TESTS:
@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@list='$(TEST_LOGS)'; \
list=`for f in $$list; do \
test .log = $$f || echo $$f; \
done | tr '\012\015' ' '`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list"
.log.html:
@list='$(RST2HTML) $$RST2HTML rst2html rst2html.py'; \
for r2h in $$list; do \
if ($$r2h --version) >/dev/null 2>&1; then \
R2H=$$r2h; \
fi; \
done; \
if test -z "$$R2H"; then \
echo >&2 "cannot find rst2html, cannot create $@"; \
exit 2; \
fi; \
$$R2H $< >$@.tmp
@mv $@.tmp $@
# Be sure to run check first, and then to convert the result.
# Beware of concurrent executions. Run "check" not "check-TESTS", as
# check-SCRIPTS and other dependencies are rebuilt by the former only.
# And expect check to fail.
check-html:
@if $(MAKE) $(AM_MAKEFLAGS) check; then \
rv=0; else rv=$$?; \
fi; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4; \
exit $$rv
recheck recheck-html:
@target=`echo $@ | sed 's,^re,,'`; \
list='$(TEST_LOGS)'; \
list=`for f in $$list; do \
test -f $$f || continue; \
if read line < $$f; then \
case $$line in FAIL*|XPASS*) echo $$f;; esac; \
else echo $$f; fi; \
done | tr '\012\015' ' '`; \
$(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS) TEST_LOGS="'"$$list"'"'
t-bswap.log: t-bswap$(EXEEXT)
@p='t-bswap$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-constants.log: t-constants$(EXEEXT)
@p='t-constants$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-count_zeros.log: t-count_zeros$(EXEEXT)
@p='t-count_zeros$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-gmpmax.log: t-gmpmax$(EXEEXT)
@p='t-gmpmax$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-hightomask.log: t-hightomask$(EXEEXT)
@p='t-hightomask$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-modlinv.log: t-modlinv$(EXEEXT)
@p='t-modlinv$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-popc.log: t-popc$(EXEEXT)
@p='t-popc$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-parity.log: t-parity$(EXEEXT)
@p='t-parity$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
t-sub.log: t-sub$(EXEEXT)
@p='t-sub$(EXEEXT)'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
.test.log:
@p='$<'; $(am__check_pre) $(TEST_LOG_COMPILE) "$$tst" $(am__check_post)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; $(am__check_pre) $(TEST_LOG_COMPILE) "$$tst" $(am__check_post)
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
-test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
check-html ctags-recursive install-am install-strip recheck \
recheck-html tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-TESTS check-am check-html clean \
clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
clean-libtool ctags ctags-recursive distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am recheck recheck-html \
tags tags-recursive uninstall uninstall-am
# .s assembler, no preprocessing.
#
.s.o:
$(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
.s.obj:
$(CCAS) $(COMPILE_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
.s.lo:
$(LIBTOOL) --mode=compile --tag=CC $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
# .S assembler, preprocessed with cpp.
#
# It's necessary to run $(CPP) separately, since it seems not all compilers
# recognise .S files, in particular "cc" on HP-UX 10 and 11 doesn't (and
# will silently do nothing if given a .S).
#
# For .lo we need a helper script, as described below for .asm.lo.
#
.S.o:
$(CPP) $(PREPROCESS_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< | grep -v '^#' >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.S.obj:
$(CPP) $(PREPROCESS_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` | grep -v '^#' >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.S.lo:
$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/cpp-ccas --cpp="$(CPP) $(PREPROCESS_FLAGS)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
# .asm assembler, preprocessed with m4.
#
# .o and .obj are non-PIC and just need m4 followed by a compile.
#
# .lo is a bit tricky. Libtool (as of version 1.5) has foo.lo as a little
# text file, and .libs/foo.o and foo.o as the PIC and non-PIC objects,
# respectively. It'd be asking for lots of trouble to try to create foo.lo
# ourselves, so instead arrange to invoke libtool like a --mode=compile, but
# with a special m4-ccas script which first m4 preprocesses, then compiles.
# --tag=CC is necessary since foo.asm is otherwise unknown to libtool.
#
# Libtool adds -DPIC when building a shared object and the .asm files look
# for that. But it should be noted that the other PIC flags are on occasion
# important too, in particular FreeBSD 2.2.8 gas 1.92.3 requires -k before
# it accepts PIC constructs like @GOT, and gcc adds that flag only under
# -fPIC. (Later versions of gas are happy to accept PIC stuff any time.)
#
.asm.o:
$(M4) -DOPERATION_$* `test -f '$<' || echo '$(srcdir)/'`$< >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.asm.obj:
$(M4) -DOPERATION_$* `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.asm.lo:
$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/m4-ccas --m4="$(M4)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
# .as assembler, assembled with Yasm
.as.lo:
$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/strip_fPIC.sh $(top_builddir)$(MPIR_AS) -I $(top_builddir) $(OBJECT_FORMAT) $(GSYM_FLAG) -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink