mpir/mpn/x86w/p3/divexact_by3c.asm
2012-11-25 22:33:07 +00:00

150 lines
4.6 KiB
NASM

; Copyright 2000, 2002 Free Software Foundation, Inc.
;
; This file is part of the GNU MP Library.
;
; The GNU MP Library is free software; you can redistribute it and/or
; modify it under the terms of the GNU Lesser General Public License as
; published by the Free Software Foundation; either version 2.1 of the
; License, or (at your option) any later version.
;
; The GNU MP Library is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
; Lesser General Public License for more details.
;
; You should have received a copy of the GNU Lesser General Public
; License along with the GNU MP Library; see the file COPYING.LIB. If
; not, write to the Free Software Foundation, Inc., 59 Temple Place -
; Suite 330, Boston, MA 02111-1307, USA.
;
; Translation of AT&T syntax code by Brian Gladman
%include "..\x86i.inc"
global ___gmpn_divexact_by3c
%ifdef DLL
export ___gmpn_divexact_by3c
%endif
%define PARAM_CARRY esp+frame+16
%define PARAM_SIZE esp+frame+12
%define PARAM_SRC esp+frame+8
%define PARAM_DST esp+frame+4
%define frame 0
; multiplicative inverse of 3,modulo 2^32
; ceil(b/3),ceil(b*2/3) and floor(b*2/3) where b=2^32
%define INVERSE_3 -0x55555555
%define ONE_THIRD_CEIL 0x55555556
%define TWO_THIRDS_CEIL 0xAAAAAAAB
%define TWO_THIRDS_FLOOR 0xAAAAAAAA
section .text
align 8
___gmpn_divexact_by3c:
mov ecx,[PARAM_SRC]
mov edx,[PARAM_SIZE]
dec edx
jnz Ltwo_or_more
mov edx,[ecx]
mov eax,[PARAM_CARRY] ; risk of cache bank clash here
mov ecx,[PARAM_DST]
sub edx,eax
sbb eax,eax ; 0 or -1
imul edx,edx,INVERSE_3
neg eax ; 0 or 1
cmp edx,ONE_THIRD_CEIL
sbb eax,-1 ; +1 if edx>=ceil(b/3)
cmp edx,TWO_THIRDS_CEIL
sbb eax,-1 ; +1 if edx>=ceil(b*2/3)
mov [ecx],edx
ret
; eax
; ebx
; ecx src
; edx size-1
; esi
; edi
; ebp
Ltwo_or_more:
FR_push ebx
FR_push esi
FR_push edi
FR_push ebp
mov edi,[PARAM_DST]
mov esi,[PARAM_CARRY]
mov eax,[ecx] ; src low limb
xor ebx,ebx
sub eax,esi
mov esi,TWO_THIRDS_FLOOR
lea ecx,[ecx+edx*4] ; &src[size-1]
lea edi,[edi+edx*4] ; &dst[size-1]
adc ebx,0 ; carry,0 or 1
neg edx ; -(size-1)
; The loop needs a source limb ready at the top,which leads to one limb
; handled separately at the end,and the special case above for size==1.
; There doesn't seem to be any scheduling that would keep the speed but move
; the source load and carry subtract up to the top.
;
; The destination cache line prefetching adds 1 cycle to the loop but is
; considered worthwhile. The slowdown is a factor of 1.07,but will prevent
; repeated write-throughs if the destination isn't in L1. A version using
; an outer loop to prefetch only every 8 limbs (a cache line) proved to be
; no faster,due to unavoidable branch mispreditions in the inner loop.
;
; setc is 2 cycles on P54,so an adcl is used instead. If the movl $0,%ebx
; could be avoided then the src limb fetch could pair up and save a cycle.
; This would probably mean going to a two limb loop with the carry limb
; alternately positive or negative,since an sbbl %ebx,%ebx will leave a
; value which is in the opposite sense to the preceding sbbl/adcl %ebx,%eax.
;
; A register is used for TWO_THIRDS_FLOOR because a cmp can't be done as
; "cmpl %edx,$n" with the immediate as the second operand.
;
; The "4" source displacement is in the loop rather than the setup because
; this gets Ltop aligned to 8 bytes at no cost.
; eax source limb,carry subtracted
; ebx carry (0 or 1)
; ecx &src[size-1]
; edx counter,limbs,negative
; esi TWO_THIRDS_FLOOR
; edi &dst[size-1]
; ebp scratch (result limb)
align 8
Ltop:
imul ebp,eax,INVERSE_3
cmp ebp,ONE_THIRD_CEIL
mov eax,[edi+edx*4] ; dst cache line prefetch
sbb ebx,-1 ; +1 if ebp>=ceil(b/3)
cmp esi,ebp
mov eax,[4+ecx+edx*4] ; next src limb
sbb eax,ebx ; and further -1 if ebp>=ceil(b*2/3)
mov ebx,0
adc ebx,0 ; new carry
mov [edi+edx*4],ebp
inc edx
jnz Ltop
imul edx,eax,INVERSE_3
cmp edx,ONE_THIRD_CEIL
mov [edi],edx
sbb ebx,-1 ; +1 if edx>=ceil(b/3)
cmp edx,TWO_THIRDS_CEIL
sbb ebx,-1 ; +1 if edx>=ceil(b*2/3)
pop ebp
mov eax,ebx
pop edi
pop esi
pop ebx
ret
end