385 lines
9.5 KiB
NASM
385 lines
9.5 KiB
NASM
dnl AMD K6 mpn_addmul_1/mpn_submul_1 -- add or subtract mpn multiple.
|
|
|
|
dnl Copyright 1999, 2000, 2001, 2002, 2003, 2005 Free Software Foundation,
|
|
dnl Inc.
|
|
dnl
|
|
dnl This file is part of the GNU MP Library.
|
|
dnl
|
|
dnl The GNU MP Library is free software; you can redistribute it and/or
|
|
dnl modify it under the terms of the GNU Lesser General Public License as
|
|
dnl published by the Free Software Foundation; either version 2.1 of the
|
|
dnl License, or (at your option) any later version.
|
|
dnl
|
|
dnl The GNU MP Library is distributed in the hope that it will be useful,
|
|
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
dnl Lesser General Public License for more details.
|
|
dnl
|
|
dnl You should have received a copy of the GNU Lesser General Public
|
|
dnl License along with the GNU MP Library; see the file COPYING.LIB. If
|
|
dnl not, write to the Free Software Foundation, Inc., 51 Franklin Street,
|
|
dnl Fifth Floor, Boston, MA 02110-1301, USA.
|
|
|
|
include(`../config.m4')
|
|
|
|
|
|
C cycles/limb
|
|
C P5:
|
|
C P6 model 0-8,10-12) 5.94
|
|
C P6 model 9 (Banias)
|
|
C P6 model 13 (Dothan) 5.57
|
|
C P4 model 0 (Willamette)
|
|
C P4 model 1 (?)
|
|
C P4 model 2 (Northwood)
|
|
C P4 model 3 (Prescott)
|
|
C P4 model 4 (Nocona)
|
|
C K6: 7.65-8.5 (data dependent)
|
|
C K7:
|
|
C K8:
|
|
|
|
|
|
dnl K6: large multpliers small multpliers
|
|
dnl UNROLL_COUNT cycles/limb cycles/limb
|
|
dnl 4 9.5 7.78
|
|
dnl 8 9.0 7.78
|
|
dnl 16 8.4 7.65
|
|
dnl 32 8.4 8.2
|
|
dnl
|
|
dnl Maximum possible unrolling with the current code is 32.
|
|
dnl
|
|
dnl Unrolling to 16 limbs/loop makes the unrolled loop fit exactly in a 256
|
|
dnl byte block, which might explain the good speed at that unrolling.
|
|
|
|
deflit(UNROLL_COUNT, 16)
|
|
|
|
define(OPERATION_submul_1,1)
|
|
|
|
ifdef(`OPERATION_addmul_1', `
|
|
define(M4_inst, addl)
|
|
define(M4_function_1, mpn_addmul_1)
|
|
define(M4_function_1c, mpn_addmul_1c)
|
|
',`ifdef(`OPERATION_submul_1', `
|
|
define(M4_inst, subl)
|
|
define(M4_function_1, mpn_submul_1)
|
|
define(M4_function_1c, mpn_submul_1c)
|
|
',`m4_error(`Need OPERATION_addmul_1 or OPERATION_submul_1
|
|
')')')
|
|
|
|
MULFUNC_PROLOGUE(mpn_submul_1 mpn_submul_1c)
|
|
|
|
|
|
C mp_limb_t mpn_addmul_1 (mp_ptr dst, mp_srcptr src, mp_size_t size,
|
|
C mp_limb_t mult);
|
|
C mp_limb_t mpn_addmul_1c (mp_ptr dst, mp_srcptr src, mp_size_t size,
|
|
C mp_limb_t mult, mp_limb_t carry);
|
|
C mp_limb_t mpn_submul_1 (mp_ptr dst, mp_srcptr src, mp_size_t size,
|
|
C mp_limb_t mult);
|
|
C mp_limb_t mpn_submul_1c (mp_ptr dst, mp_srcptr src, mp_size_t size,
|
|
C mp_limb_t mult, mp_limb_t carry);
|
|
C
|
|
C The jadcl0()s in the unrolled loop makes the speed data dependent. Small
|
|
C multipliers (most significant few bits clear) result in few carry bits and
|
|
C speeds up to 7.65 cycles/limb are attained. Large multipliers (most
|
|
C significant few bits set) make the carry bits 50/50 and lead to something
|
|
C more like 8.4 c/l. With adcl's both of these would be 9.3 c/l.
|
|
C
|
|
C It's important that the gains for jadcl0 on small multipliers don't come
|
|
C at the cost of slowing down other data. Tests on uniformly distributed
|
|
C random data, designed to confound branch prediction, show about a 7%
|
|
C speed-up using jadcl0 over adcl (8.93 versus 9.57 cycles/limb, with all
|
|
C overheads included).
|
|
C
|
|
C In the simple loop, jadcl0() measures slower than adcl (11.9-14.7 versus
|
|
C 11.0 cycles/limb), and hence isn't used.
|
|
C
|
|
C In the simple loop, note that running ecx from negative to zero and using
|
|
C it as an index in the two movs wouldn't help. It would save one
|
|
C instruction (2*addl+loop becoming incl+jnz), but there's nothing unpaired
|
|
C that would be collapsed by this.
|
|
C
|
|
C Attempts at a simpler main loop, with less unrolling, haven't yielded much
|
|
C success, generally running over 9 c/l.
|
|
C
|
|
C
|
|
C jadcl0
|
|
C ------
|
|
C
|
|
C jadcl0() being faster than adcl $0 seems to be an artifact of two things,
|
|
C firstly the instruction decoding and secondly the fact that there's a
|
|
C carry bit for the jadcl0 only on average about 1/4 of the time.
|
|
C
|
|
C The code in the unrolled loop decodes something like the following.
|
|
C
|
|
C decode cycles
|
|
C mull %ebp 2
|
|
C M4_inst %esi, disp(%edi) 1
|
|
C adcl %eax, %ecx 2
|
|
C movl %edx, %esi \ 1
|
|
C jnc 1f /
|
|
C incl %esi \ 1
|
|
C 1: movl disp(%ebx), %eax /
|
|
C ---
|
|
C 7
|
|
C
|
|
C In a back-to-back style test this measures 7 with the jnc not taken, or 8
|
|
C with it taken (both when correctly predicted). This is opposite to the
|
|
C measurements showing small multipliers running faster than large ones.
|
|
C Don't really know why.
|
|
C
|
|
C It's not clear how much branch misprediction might be costing. The K6
|
|
C doco says it will be 1 to 4 cycles, but presumably it's near the low end
|
|
C of that range to get the measured results.
|
|
C
|
|
C
|
|
C In the code the two carries are more or less the preceding mul product and
|
|
C the calculation is roughly
|
|
C
|
|
C x*y + u*b+v
|
|
C
|
|
C where b=2^32 is the size of a limb, x*y is the two carry limbs, and u and
|
|
C v are the two limbs it's added to (being the low of the next mul, and a
|
|
C limb from the destination).
|
|
C
|
|
C To get a carry requires x*y+u*b+v >= b^2, which is u*b+v >= b^2-x*y, and
|
|
C there are b^2-(b^2-x*y) = x*y many such values, giving a probability of
|
|
C x*y/b^2. If x, y, u and v are random and uniformly distributed between 0
|
|
C and b-1, then the total probability can be summed over x and y,
|
|
C
|
|
C 1 b-1 b-1 x*y 1 b*(b-1) b*(b-1)
|
|
C --- * sum sum --- = --- * ------- * ------- = 1/4
|
|
C b^2 x=0 y=1 b^2 b^4 2 2
|
|
C
|
|
C Actually it's a very tiny bit less than 1/4 of course. If y is fixed,
|
|
C then the probability is 1/2*y/b thus varying linearly between 0 and 1/2.
|
|
|
|
|
|
ifdef(`PIC',`
|
|
deflit(UNROLL_THRESHOLD, 9)
|
|
',`
|
|
deflit(UNROLL_THRESHOLD, 6)
|
|
')
|
|
|
|
defframe(PARAM_CARRY, 20)
|
|
defframe(PARAM_MULTIPLIER,16)
|
|
defframe(PARAM_SIZE, 12)
|
|
defframe(PARAM_SRC, 8)
|
|
defframe(PARAM_DST, 4)
|
|
|
|
TEXT
|
|
ALIGN(32)
|
|
|
|
PROLOGUE(M4_function_1c)
|
|
pushl %esi
|
|
deflit(`FRAME',4)
|
|
movl PARAM_CARRY, %esi
|
|
jmp L(start_nc)
|
|
EPILOGUE()
|
|
|
|
PROLOGUE(M4_function_1)
|
|
push %esi
|
|
deflit(`FRAME',4)
|
|
xorl %esi, %esi C initial carry
|
|
|
|
L(start_nc):
|
|
movl PARAM_SIZE, %ecx
|
|
pushl %ebx
|
|
deflit(`FRAME',8)
|
|
|
|
movl PARAM_SRC, %ebx
|
|
pushl %edi
|
|
deflit(`FRAME',12)
|
|
|
|
cmpl $UNROLL_THRESHOLD, %ecx
|
|
movl PARAM_DST, %edi
|
|
|
|
pushl %ebp
|
|
deflit(`FRAME',16)
|
|
jae L(unroll)
|
|
|
|
|
|
C simple loop
|
|
|
|
movl PARAM_MULTIPLIER, %ebp
|
|
|
|
L(simple):
|
|
C eax scratch
|
|
C ebx src
|
|
C ecx counter
|
|
C edx scratch
|
|
C esi carry
|
|
C edi dst
|
|
C ebp multiplier
|
|
|
|
movl (%ebx), %eax
|
|
addl $4, %ebx
|
|
|
|
mull %ebp
|
|
|
|
addl $4, %edi
|
|
addl %esi, %eax
|
|
|
|
adcl $0, %edx
|
|
|
|
M4_inst %eax, -4(%edi)
|
|
|
|
adcl $0, %edx
|
|
|
|
movl %edx, %esi
|
|
loop L(simple)
|
|
|
|
|
|
popl %ebp
|
|
popl %edi
|
|
|
|
popl %ebx
|
|
movl %esi, %eax
|
|
|
|
popl %esi
|
|
ret
|
|
|
|
|
|
|
|
C -----------------------------------------------------------------------------
|
|
C The unrolled loop uses a "two carry limbs" scheme. At the top of the loop
|
|
C the carries are ecx=lo, esi=hi, then they swap for each limb processed.
|
|
C For the computed jump an odd size means they start one way around, an even
|
|
C size the other.
|
|
C
|
|
C VAR_JUMP holds the computed jump temporarily because there's not enough
|
|
C registers at the point of doing the mul for the initial two carry limbs.
|
|
C
|
|
C The add/adc for the initial carry in %esi is necessary only for the
|
|
C mpn_addmul/submul_1c entry points. Duplicating the startup code to
|
|
C eliminiate this for the plain mpn_add/submul_1 doesn't seem like a good
|
|
C idea.
|
|
|
|
dnl overlapping with parameters already fetched
|
|
define(VAR_COUNTER, `PARAM_SIZE')
|
|
define(VAR_JUMP, `PARAM_DST')
|
|
|
|
L(unroll):
|
|
C eax
|
|
C ebx src
|
|
C ecx size
|
|
C edx
|
|
C esi initial carry
|
|
C edi dst
|
|
C ebp
|
|
|
|
movl %ecx, %edx
|
|
decl %ecx
|
|
|
|
subl $2, %edx
|
|
negl %ecx
|
|
|
|
shrl $UNROLL_LOG2, %edx
|
|
andl $UNROLL_MASK, %ecx
|
|
|
|
movl %edx, VAR_COUNTER
|
|
movl %ecx, %edx
|
|
|
|
shll $4, %edx
|
|
negl %ecx
|
|
|
|
C 15 code bytes per limb
|
|
ifdef(`PIC',`
|
|
call L(pic_calc)
|
|
L(here):
|
|
',`
|
|
leal L(entry) (%edx,%ecx,1), %edx
|
|
')
|
|
movl (%ebx), %eax C src low limb
|
|
|
|
movl PARAM_MULTIPLIER, %ebp
|
|
movl %edx, VAR_JUMP
|
|
|
|
mull %ebp
|
|
|
|
addl %esi, %eax C initial carry (from _1c)
|
|
jadcl0( %edx)
|
|
|
|
|
|
leal 4(%ebx,%ecx,4), %ebx
|
|
movl %edx, %esi C high carry
|
|
|
|
movl VAR_JUMP, %edx
|
|
leal (%edi,%ecx,4), %edi
|
|
|
|
testl $1, %ecx
|
|
movl %eax, %ecx C low carry
|
|
|
|
jz L(noswap)
|
|
movl %esi, %ecx C high,low carry other way around
|
|
|
|
movl %eax, %esi
|
|
L(noswap):
|
|
|
|
jmp *%edx
|
|
|
|
|
|
ifdef(`PIC',`
|
|
L(pic_calc):
|
|
C See mpn/x86/README about old gas bugs
|
|
leal (%edx,%ecx,1), %edx
|
|
addl $L(entry)-L(here), %edx
|
|
addl (%esp), %edx
|
|
ret_internal
|
|
')
|
|
|
|
|
|
C -----------------------------------------------------------
|
|
ALIGN(32)
|
|
L(top):
|
|
deflit(`FRAME',16)
|
|
C eax scratch
|
|
C ebx src
|
|
C ecx carry lo
|
|
C edx scratch
|
|
C esi carry hi
|
|
C edi dst
|
|
C ebp multiplier
|
|
C
|
|
C 15 code bytes per limb
|
|
|
|
leal UNROLL_BYTES(%edi), %edi
|
|
|
|
L(entry):
|
|
forloop(`i', 0, UNROLL_COUNT/2-1, `
|
|
deflit(`disp0', eval(2*i*4))
|
|
deflit(`disp1', eval(disp0 + 4))
|
|
|
|
Zdisp( movl, disp0,(%ebx), %eax)
|
|
mull %ebp
|
|
Zdisp( M4_inst,%ecx, disp0,(%edi))
|
|
adcl %eax, %esi
|
|
movl %edx, %ecx
|
|
jadcl0( %ecx)
|
|
|
|
movl disp1(%ebx), %eax
|
|
mull %ebp
|
|
M4_inst %esi, disp1(%edi)
|
|
adcl %eax, %ecx
|
|
movl %edx, %esi
|
|
jadcl0( %esi)
|
|
')
|
|
|
|
decl VAR_COUNTER
|
|
|
|
leal UNROLL_BYTES(%ebx), %ebx
|
|
jns L(top)
|
|
|
|
|
|
popl %ebp
|
|
M4_inst %ecx, UNROLL_BYTES(%edi)
|
|
|
|
popl %edi
|
|
movl %esi, %eax
|
|
|
|
popl %ebx
|
|
jadcl0( %eax)
|
|
|
|
popl %esi
|
|
ret
|
|
|
|
EPILOGUE()
|