mpir/mpn/sparc64/divexact_1.c
2010-08-13 12:54:25 +00:00

150 lines
4.1 KiB
C

/* UltraSPARC 64 mpn_divexact_1 -- mpn by limb exact division.
THE FUNCTIONS IN THIS FILE ARE FOR INTERNAL USE ONLY. THEY'RE ALMOST
CERTAIN TO BE SUBJECT TO INCOMPATIBLE CHANGES OR DISAPPEAR COMPLETELY IN
FUTURE GNU MP RELEASES.
Copyright 2000, 2001, 2003 Free Software Foundation, Inc.
This file is part of the GNU MP Library.
The GNU MP Library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.
The GNU MP Library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License
along with the GNU MP Library; see the file COPYING.LIB. If not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301, USA. */
#include "mpir.h"
#include "gmp-impl.h"
#include "longlong.h"
#include "mpn/sparc64/sparc64.h"
/* 64-bit divisor 32-bit divisor
cycles/limb cycles/limb
(approx) (approx)
Ultrasparc 2i: 110 70
*/
/* There are two key ideas here to reduce mulx's. Firstly when the divisor
is 32-bits the high of q*d can be calculated without the two 32x32->64
cross-products involving the high 32-bits of the divisor, that being zero
of course. Secondly umul_ppmm_lowequal and umul_ppmm_half_lowequal save
one mulx (each) knowing the low of q*d is equal to the input limb l.
For size==1, a simple udivx is used. This is faster than calculating an
inverse.
For a 32-bit divisor and small sizes, an attempt was made at a simple
udivx loop (two per 64-bit limb), but it turned out to be slower than
mul-by-inverse. At size==2 the inverse is about 260 cycles total
compared to a udivx at 291. Perhaps the latter would suit when size==2
but the high 32-bits of the second limb is zero (saving one udivx), but
it doesn't seem worth a special case just for that. */
void
mpn_divexact_1 (mp_ptr dst, mp_srcptr src, mp_size_t size, mp_limb_t divisor)
{
mp_limb_t inverse, s, s_next, c, l, ls, q;
unsigned rshift, lshift;
mp_limb_t lshift_mask;
mp_limb_t divisor_h;
ASSERT (size >= 1);
ASSERT (divisor != 0);
ASSERT (MPN_SAME_OR_SEPARATE_P (dst, src, size));
ASSERT_MPN (src, size);
ASSERT_LIMB (divisor);
s = *src++; /* src low limb */
size--;
if (size == 0)
{
*dst = s / divisor;
return;
}
if ((divisor & 1) == 0)
{
count_trailing_zeros (rshift, divisor);
divisor >>= rshift;
}
else
rshift = 0;
modlimb_invert (inverse, divisor);
lshift = 64 - rshift;
/* lshift==64 means no shift, so must mask out other part in this case */
lshift_mask = (rshift == 0 ? 0 : MP_LIMB_T_MAX);
c = 0;
divisor_h = HIGH32 (divisor);
if (divisor_h == 0)
{
/* 32-bit divisor */
do
{
s_next = *src++;
ls = (s >> rshift) | ((s_next << lshift) & lshift_mask);
s = s_next;
SUBC_LIMB (c, l, ls, c);
q = l * inverse;
*dst++ = q;
umul_ppmm_half_lowequal (l, q, divisor, l);
c += l;
size--;
}
while (size != 0);
ls = s >> rshift;
l = ls - c;
q = l * inverse;
*dst = q;
}
else
{
/* 64-bit divisor */
mp_limb_t divisor_l = LOW32 (divisor);
do
{
s_next = *src++;
ls = (s >> rshift) | ((s_next << lshift) & lshift_mask);
s = s_next;
SUBC_LIMB (c, l, ls, c);
q = l * inverse;
*dst++ = q;
umul_ppmm_lowequal (l, q, divisor, divisor_h, divisor_l, l);
c += l;
size--;
}
while (size != 0);
ls = s >> rshift;
l = ls - c;
q = l * inverse;
*dst = q;
}
}