# Makefile.in generated by automake 1.10.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright 2000, 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is part of the GNU MP Library. # # The GNU MP Library is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or (at your # option) any later version. # # The GNU MP Library is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public # License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with the GNU MP Library; see the file COPYING.LIB. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301, USA. # Copyright 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, # Inc. # # Copyright 2008 William Hart # # This file is part of the MPIR Library. # # The MPIR Library is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or (at your # option) any later version. # # The MPIR Library is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public # License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with the MPIR Library; see the file COPYING.LIB. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301, USA. VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ EXTRA_PROGRAMS = speed$(EXEEXT) speed-dynamic$(EXEEXT) \ speed-ext$(EXEEXT) tuneup$(EXEEXT) DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/../mpn/Makeasm.am \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in subdir = tune ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__DEPENDENCIES_1 = am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) \ $(top_builddir)/tests/libtests.la $(top_builddir)/libmpir.la am_libspeed_la_OBJECTS = common.lo divrem1div.lo divrem1inv.lo \ divrem2div.lo divrem2inv.lo freq.lo gcd_bin.lo \ gcd_finda_gen.lo gcdext_single.lo gcdext_double.lo gcdextod.lo \ gcdextos.lo jacbase1.lo jacbase2.lo jacbase3.lo mod_1_div.lo \ mod_1_inv.lo modlinv.lo noop.lo powm_mod.lo powm_redc.lo \ pre_divrem_1.lo fac_ui_large.lo fac_ui_small.lo set_strb.lo \ set_strs.lo set_strp.lo time.lo libspeed_la_OBJECTS = $(am_libspeed_la_OBJECTS) libspeed_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libspeed_la_LDFLAGS) $(LDFLAGS) -o $@ am_speed_OBJECTS = speed.$(OBJEXT) speed_OBJECTS = $(am_speed_OBJECTS) speed_LDADD = $(LDADD) speed_DEPENDENCIES = $(DEPENDENCIES) speed_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(speed_LDFLAGS) \ $(LDFLAGS) -o $@ am_speed_dynamic_OBJECTS = speed.$(OBJEXT) speed_dynamic_OBJECTS = $(am_speed_dynamic_OBJECTS) speed_dynamic_LDADD = $(LDADD) speed_dynamic_DEPENDENCIES = $(DEPENDENCIES) am_speed_ext_OBJECTS = speed-ext.$(OBJEXT) speed_ext_OBJECTS = $(am_speed_ext_OBJECTS) speed_ext_LDADD = $(LDADD) speed_ext_DEPENDENCIES = $(DEPENDENCIES) speed_ext_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(speed_ext_LDFLAGS) $(LDFLAGS) -o $@ am_tuneup_OBJECTS = tuneup.$(OBJEXT) am__objects_1 = divrem_2.$(OBJEXT) gcd.$(OBJEXT) gcdext.$(OBJEXT) \ get_str.$(OBJEXT) mul_n.$(OBJEXT) mullow_n.$(OBJEXT) \ mulhigh_n.$(OBJEXT) mul_fft.$(OBJEXT) mul.$(OBJEXT) \ tdiv_qr.$(OBJEXT) toom4_mul_n.$(OBJEXT) toom4_mul.$(OBJEXT) \ toom3_mul.$(OBJEXT) toom3_mul_n.$(OBJEXT) toom8h_mul.$(OBJEXT) \ toom8_sqr_n.$(OBJEXT) mulmod_2expm1.$(OBJEXT) \ rootrem.$(OBJEXT) divrem_euclidean_r_1.$(OBJEXT) \ divrem_hensel_qr_1.$(OBJEXT) rsh_divrem_hensel_qr_1.$(OBJEXT) \ dc_divappr_q.$(OBJEXT) dc_div_qr.$(OBJEXT) \ inv_divappr_q.$(OBJEXT) inv_div_qr.$(OBJEXT) tdiv_q.$(OBJEXT) \ dc_bdiv_qr.$(OBJEXT) dc_bdiv_q.$(OBJEXT) am__objects_2 = $(am__objects_1) divrem_1.$(OBJEXT) mod_1.$(OBJEXT) nodist_tuneup_OBJECTS = sqr_basecase.$(OBJEXT) $(am__objects_2) tuneup_OBJECTS = $(am_tuneup_OBJECTS) $(nodist_tuneup_OBJECTS) am__DEPENDENCIES_3 = $(am__DEPENDENCIES_1) libspeed.la tuneup_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(tuneup_LDFLAGS) \ $(LDFLAGS) -o $@ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libspeed_la_SOURCES) $(speed_SOURCES) \ $(speed_dynamic_SOURCES) $(speed_ext_SOURCES) \ $(tuneup_SOURCES) $(nodist_tuneup_SOURCES) DIST_SOURCES = $(libspeed_la_SOURCES) $(speed_SOURCES) \ $(speed_dynamic_SOURCES) $(speed_ext_SOURCES) \ $(tuneup_SOURCES) HEADERS = $(noinst_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ABI = @ABI@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BITS_PER_MP_LIMB = @BITS_PER_MP_LIMB@ CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@ CC = @CC@ CCAS = @CCAS@ CC_FOR_BUILD = @CC_FOR_BUILD@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPP_FOR_BUILD = @CPP_FOR_BUILD@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@ DEFS = @DEFS@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ GMP_CC = @GMP_CC@ GMP_CFLAGS = @GMP_CFLAGS@ GMP_LDFLAGS = @GMP_LDFLAGS@ GMP_NAIL_BITS = @GMP_NAIL_BITS@ GREP = @GREP@ GSYM_FLAG = @GSYM_FLAG@ HAVE_CLOCK_01 = @HAVE_CLOCK_01@ HAVE_CPUTIME_01 = @HAVE_CPUTIME_01@ HAVE_GETRUSAGE_01 = @HAVE_GETRUSAGE_01@ HAVE_GETTIMEOFDAY_01 = @HAVE_GETTIMEOFDAY_01@ HAVE_HOST_CPU_FAMILY_power = @HAVE_HOST_CPU_FAMILY_power@ HAVE_HOST_CPU_FAMILY_powerpc = @HAVE_HOST_CPU_FAMILY_powerpc@ HAVE_SIGACTION_01 = @HAVE_SIGACTION_01@ HAVE_SIGALTSTACK_01 = @HAVE_SIGALTSTACK_01@ HAVE_SIGSTACK_01 = @HAVE_SIGSTACK_01@ HAVE_STACK_T_01 = @HAVE_STACK_T_01@ HAVE_SYS_RESOURCE_H_01 = @HAVE_SYS_RESOURCE_H_01@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBCURSES = @LIBCURSES@ LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@ LIBGMP_DLL = @LIBGMP_DLL@ LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@ LIBM = @LIBM@ LIBM_FOR_BUILD = @LIBM_FOR_BUILD@ LIBOBJS = @LIBOBJS@ LIBREADLINE = @LIBREADLINE@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ M4 = @M4@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MPIR_AS = @MPIR_AS@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJECT_FORMAT = @OBJECT_FORMAT@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@ STRIP = @STRIP@ TAL_OBJECT = @TAL_OBJECT@ TUNE_SQR_OBJ = @TUNE_SQR_OBJ@ U_FOR_BUILD = @U_FOR_BUILD@ VERSION = @VERSION@ WITH_READLINE_01 = @WITH_READLINE_01@ YACC = @YACC@ YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__leading_dot = @am__leading_dot@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gmp_srclinks = @gmp_srclinks@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ mpn_objects = @mpn_objects@ mpn_objs_in_libgmp = @mpn_objs_in_libgmp@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/tests EXTRA_DIST = alpha.asm pentium.asm sparcv9.asm hppa.asm hppa2.asm hppa2w.asm \ ia64.asm powerpc.asm powerpc64.asm x86_64.as many.pl noinst_HEADERS = speed.h @ENABLE_STATIC_FALSE@STATIC = # Prefer -static on the speed and tune programs, since that can avoid # overheads of shared library linkages on some systems. Libtool tends to # botch -static if configured with --disable-static, perhaps reasonably # enough. In any event under --disable-static the only choice is a dynamic # link so there's no point in -static. # @ENABLE_STATIC_TRUE@STATIC = -static EXTRA_LTLIBRARIES = libspeed.la libspeed_la_SOURCES = \ common.c divrem1div.c divrem1inv.c divrem2div.c divrem2inv.c \ freq.c gcd_bin.c gcd_finda_gen.c \ gcdext_single.c gcdext_double.c gcdextod.c gcdextos.c \ jacbase1.c jacbase2.c jacbase3.c \ mod_1_div.c mod_1_inv.c modlinv.c \ noop.c powm_mod.c powm_redc.c pre_divrem_1.c \ fac_ui_large.c fac_ui_small.c \ set_strb.c set_strs.c set_strp.c time.c libspeed_la_DEPENDENCIES = $(SPEED_CYCLECOUNTER_OBJ) \ $(top_builddir)/tests/libtests.la $(top_builddir)/libmpir.la libspeed_la_LIBADD = $(libspeed_la_DEPENDENCIES) $(LIBM) libspeed_la_LDFLAGS = $(STATIC) DEPENDENCIES = libspeed.la LDADD = $(DEPENDENCIES) speed_SOURCES = speed.c speed_LDFLAGS = $(STATIC) speed_dynamic_SOURCES = speed.c speed_ext_SOURCES = speed-ext.c speed_ext_LDFLAGS = $(STATIC) tuneup_SOURCES = tuneup.c nodist_tuneup_SOURCES = sqr_basecase.c $(TUNE_MPN_SRCS) tuneup_DEPENDENCIES = $(TUNE_SQR_OBJ) libspeed.la tuneup_LDADD = $(tuneup_DEPENDENCIES) tuneup_LDFLAGS = $(STATIC) # $(MANY_CLEAN) and $(MANY_DISTCLEAN) are hooks for many.pl CLEANFILES = $(EXTRA_PROGRAMS) $(EXTRA_LTLIBRARIES) \ $(TUNE_MPN_SRCS) sqr_asm.asm \ stg.gnuplot stg.data \ mtg.gnuplot mtg.data \ fibg.gnuplot fibg.data \ graph.gnuplot graph.data \ $(MANY_CLEAN) DISTCLEANFILES = sqr_basecase.c $(MANY_DISTCLEAN) # Generating these little files at build time seems better than including # them in the distribution, since the list can be changed more easily. # # mpn/generic/tdiv_qr.c uses mpn_divrem_1 and mpn_divrem_2, but only for 1 # and 2 limb divisors, which are never used during tuning, so it doesn't # matter whether it picks up a tuned or untuned version of those. # # divrem_1 and mod_1 are recompiled renamed to "_tune" to avoid a linking # problem. If a native divrem_1 provides an mpn_divrem_1c entrypoint then # common.c will want that, but the generic divrem_1 doesn't provide it, # likewise for mod_1. The simplest way around this is to have the tune # build versions renamed suitably. # # FIXME: Would like say mul_n.c to depend on $(top_builddir)/mul_n.c so the # recompiled object will be rebuilt if that file changes. TUNE_MPN_SRCS = $(TUNE_MPN_SRCS_BASIC) divrem_1.c mod_1.c TUNE_MPN_SRCS_BASIC = divrem_2.c gcd.c gcdext.c get_str.c \ mul_n.c mullow_n.c mulhigh_n.c mul_fft.c mul.c tdiv_qr.c \ toom4_mul_n.c toom4_mul.c toom3_mul.c toom3_mul_n.c \ toom8h_mul.c toom8_sqr_n.c mulmod_2expm1.c rootrem.c divrem_euclidean_r_1.c \ divrem_hensel_qr_1.c rsh_divrem_hensel_qr_1.c dc_divappr_q.c dc_div_qr.c \ inv_divappr_q.c inv_div_qr.c tdiv_q.c dc_bdiv_qr.c dc_bdiv_q.c # COMPILE minus CC. # COMPILE_FLAGS = $(DEFS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(INCLUDES) $(DEFAULT_INCLUDES) # Flags used for preprocessing (in ansi2knr rules). # PREPROCESS_FLAGS = $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) # Recent versions of automake (1.5 and up for instance) append automake # generated suffixes to this $(SUFFIXES) list. This is essential for us, # since .c must come after .s, .S and .asm. If .c is before .s, for # instance, then in the mpn directory "make" will see add_n.c mentioned in # an explicit rule (the ansi2knr stuff) and decide it must have add_n.c, # even if add_n.c doesn't exist but add_n.s does. See GNU make # documentation "(make)Implicit Rule Search", part 5c. # # On IRIX 6 native make this doesn't work properly though. Somehow .c # remains ahead of .s, perhaps because .c.s is a builtin rule. .asm works # fine though, and mpn/mips3 uses this. # SUFFIXES = .s .S .as .asm # can be overridden during development, eg. "make RM_TMP=: mul_1.lo" RM_TMP = rm -f all: all-am .SUFFIXES: .SUFFIXES: .s .S .as .asm .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../mpn/Makeasm.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps tune/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu --ignore-deps tune/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh libspeed.la: $(libspeed_la_OBJECTS) $(libspeed_la_DEPENDENCIES) $(libspeed_la_LINK) $(libspeed_la_OBJECTS) $(libspeed_la_LIBADD) $(LIBS) speed$(EXEEXT): $(speed_OBJECTS) $(speed_DEPENDENCIES) @rm -f speed$(EXEEXT) $(speed_LINK) $(speed_OBJECTS) $(speed_LDADD) $(LIBS) speed-dynamic$(EXEEXT): $(speed_dynamic_OBJECTS) $(speed_dynamic_DEPENDENCIES) @rm -f speed-dynamic$(EXEEXT) $(LINK) $(speed_dynamic_OBJECTS) $(speed_dynamic_LDADD) $(LIBS) speed-ext$(EXEEXT): $(speed_ext_OBJECTS) $(speed_ext_DEPENDENCIES) @rm -f speed-ext$(EXEEXT) $(speed_ext_LINK) $(speed_ext_OBJECTS) $(speed_ext_LDADD) $(LIBS) tuneup$(EXEEXT): $(tuneup_OBJECTS) $(tuneup_DEPENDENCIES) @rm -f tuneup$(EXEEXT) $(tuneup_LINK) $(tuneup_OBJECTS) $(tuneup_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c .c.o: $(COMPILE) -c $< .c.obj: $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(HEADERS) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-exec-am: install-html: install-html-am install-info: install-info-am install-man: install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool ctags distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am $(top_builddir)/tests/libtests.la: cd $(top_builddir)/tests; $(MAKE) $(AM_MAKEFLAGS) libtests.la tune: $(MAKE) $(AM_MAKEFLAGS) tuneup$(EXEEXT) ./tuneup allprogs: $(EXTRA_PROGRAMS) $(TUNE_MPN_SRCS_BASIC): for i in $(TUNE_MPN_SRCS_BASIC); do \ echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \ echo "#include \"mpn/generic/$$i\"" >>$$i; \ done divrem_1.c: echo "#define TUNE_PROGRAM_BUILD 1" >divrem_1.c echo "#define __gmpn_divrem_1 mpn_divrem_1_tune" >>divrem_1.c echo "#include \"mpn/generic/divrem_1.c\"" >>divrem_1.c mod_1.c: echo "#define TUNE_PROGRAM_BUILD 1" >mod_1.c echo "#define __gmpn_mod_1 mpn_mod_1_tune" >>mod_1.c echo "#include \"mpn/generic/mod_1.c\"" >>mod_1.c sqr_asm.asm: $(top_builddir)/mpn/sqr_basecase.asm echo 'define(SQR_KARATSUBA_THRESHOLD_OVERRIDE,SQR_KARATSUBA_THRESHOLD_MAX)' >sqr_asm.asm echo 'include(../mpn/sqr_basecase.asm)' >>sqr_asm.asm # .s assembler, no preprocessing. # .s.o: $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< .s.obj: $(CCAS) $(COMPILE_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` .s.lo: $(LIBTOOL) --mode=compile --tag=CC $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< # .S assembler, preprocessed with cpp. # # It's necessary to run $(CPP) separately, since it seems not all compilers # recognise .S files, in particular "cc" on HP-UX 10 and 11 doesn't (and # will silently do nothing if given a .S). # # For .lo we need a helper script, as described below for .asm.lo. # .S.o: $(CPP) $(PREPROCESS_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< | grep -v '^#' >tmp-$*.s $(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@ $(RM_TMP) tmp-$*.s .S.obj: $(CPP) $(PREPROCESS_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` | grep -v '^#' >tmp-$*.s $(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@ $(RM_TMP) tmp-$*.s .S.lo: $(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/cpp-ccas --cpp="$(CPP) $(PREPROCESS_FLAGS)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< # .asm assembler, preprocessed with m4. # # .o and .obj are non-PIC and just need m4 followed by a compile. # # .lo is a bit tricky. Libtool (as of version 1.5) has foo.lo as a little # text file, and .libs/foo.o and foo.o as the PIC and non-PIC objects, # respectively. It'd be asking for lots of trouble to try to create foo.lo # ourselves, so instead arrange to invoke libtool like a --mode=compile, but # with a special m4-ccas script which first m4 preprocesses, then compiles. # --tag=CC is necessary since foo.asm is otherwise unknown to libtool. # # Libtool adds -DPIC when building a shared object and the .asm files look # for that. But it should be noted that the other PIC flags are on occasion # important too, in particular FreeBSD 2.2.8 gas 1.92.3 requires -k before # it accepts PIC constructs like @GOT, and gcc adds that flag only under # -fPIC. (Later versions of gas are happy to accept PIC stuff any time.) # .asm.o: $(M4) -DOPERATION_$* `test -f '$<' || echo '$(srcdir)/'`$< >tmp-$*.s $(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@ $(RM_TMP) tmp-$*.s .asm.obj: $(M4) -DOPERATION_$* `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` >tmp-$*.s $(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@ $(RM_TMP) tmp-$*.s .asm.lo: $(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/m4-ccas --m4="$(M4)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< # .as assembler, assembled with Yasm .as.lo: $(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/strip_fPIC.sh $(top_builddir)$(MPIR_AS) -I $(top_builddir) $(OBJECT_FORMAT) $(GSYM_FLAG) -o $@ `test -f '$<' || echo '$(srcdir)/'`$< # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: