# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Process this file with automake to generate Makefile.in

# Copyright 1991, 1993, 1994, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004,
# 2006 Free Software Foundation, Inc.
#
# Copyright 2008 William Hart, Michael Abshoff
#
# This file is part of the MPIR Library.
#
# The MPIR Library is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at your
# option) any later version.
#
# The MPIR Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with the MPIR Library; see the file COPYING.LIB.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.

# Libtool -version-info for libmpir.la and libmp.la.  See "Versioning" in the
# libtool manual.
#
# 1. No interfaces changed, only implementations (good): Increment REVISION.
#
# 2. Interfaces added, none removed (good): Increment CURRENT, increment
#    AGE, set REVISION to 0.
#
# 3. Interfaces removed (BAD, breaks upward compatibility): Increment
#    CURRENT, set AGE and REVISION to 0.
#
# Do this separately for libgmp, libgmpxx and libmp, and only for releases.
#
#	  GMP	   -version-info
#       release   libgmp  libgmpxx libmp
#        2.0.x      -        -       -
#        3.0      3:0:0      -     3:0:0
#        3.0.1    3:1:0      -     3:0:0
#        3.1      4:0:1      -     4:0:1
#        3.1.1    4:1:1      -     4:1:1
#        4.0      5:0:2    3:0:0   4:2:1
#        4.0.1    5:1:2    3:1:0   4:3:1
#        4.1      6:0:3    3:2:0   4:4:1
#        4.1.1    6:1:3    3:3:0   4:5:1
#        4.1.2    6:2:3    3:4:0   4:6:1
#        4.1.3    6:3:3    3:5:0   4:7:1
#        4.1.4    6:3:3    3:5:0   4:7:1	WRONG, same as 4.1.3!
#        4.2      6:0:3    3:2:0   4:4:1	REALLY WRONG, same as 4.1!
#        4.2.1    7:1:4    4:1:1   4:10:1
#
#	  MPIR	   -version-info
#       release   libgmp  libgmpxx libmp
#	0.9.0	7:1:4	4:1:1	4:10:1   WRONG, same as GMP 4.2.1
#	1.0.0	7:2:4	4:2:1	4:11:1
#	1.1.0	7:3:4	4:3:1	4:12:1
#	1.2.0	7:4:4	4:4:1	4:13:1
#	1.3.0	8:0:0	4:5:1	4:14:1 
#	1.3.1	8:1:0	4:6:1	0:0:0
#	2.0.0	9:2:0	4:7:1
#	2.1.0	10:0:1	4:8:1
#	2.1.1	10:1:2	4:9:2
#	2.1.2	10.2.2	4.10.2
#	2.1.3	10.3.2	4.11.2
#	2.1.4	10.4.2	4.12.2
#	2.2.0	10.5.2	4.13.2
#	2.2.1	10.6.3	4.14.3
#	2.3.0	10.7.3	4.15.3
#	2.3.1	10.8.3	4.16.3
#	2.4.0   11.0.4  4.17.3
#	2.5.0	11.1.4	4.18.3
#	2.5.1	11.2.4	4.19.3
#	2.5.2	11.3.4	4.20.3
#	2.6.0   11.0.5  4.21.3               Clearly wrong!!
#       2.7.0   16.0.6  8.0.4                Attempt to correct wrt all prev 
#
# Starting at 3:0:0 is a slight abuse of the versioning system, but it
# ensures we're past soname libgmp.so.2, which was used on Debian GNU/Linux
# packages of gmp 2.  Pretend gmp 2 was 2:0:0, so the interface changes for
# gmp 3 mean 3:0:0 is right.
#
# We interpret "implementation changed" in item "1." above as meaning any
# release, ie. the REVISION is incremented every time (if nothing else).
# Even if we thought the code generated will be identical on all systems,
# it's still good to get the shared library filename (like
# libgmpxx.so.3.0.4) incrementing, to make it clear which GMP it's from.


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@BUILD_YASM_TRUE@am__append_1 = yasm
@WANT_GMPCOMPAT_TRUE@am__append_2 = libgmp.la
@WANT_GMPCOMPAT_TRUE@am__append_3 = gmp.h
@WANT_GMPCOMPAT_TRUE@am__append_4 = gmp.h
@WANT_CXX_TRUE@@WANT_GMPCOMPAT_TRUE@am__append_5 = gmpxx.h
@WANT_CXX_TRUE@@WANT_GMPCOMPAT_TRUE@am__append_6 = gmpxx.h
@WANT_CXX_TRUE@@WANT_GMPCOMPAT_TRUE@am__append_7 = libgmpxx.la
subdir = .
DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/config.in $(srcdir)/configfsf.guess \
	$(srcdir)/configfsf.sub $(srcdir)/configure.yasm \
	$(srcdir)/gmp-h.in $(srcdir)/longlong_post.h \
	$(srcdir)/longlong_pre.h $(srcdir)/mpirxx.h \
	$(top_srcdir)/configure AUTHORS COPYING COPYING.LIB ChangeLog \
	INSTALL NEWS config.guess config.sub install-sh ltmain.sh \
	missing ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = longlong.h yasm/config/config.guess \
	yasm/config/config.sub yasm/configure.gnu mpir.h gmp.h gmpxx.h \
	gmp-mparam.h yasm_mac.inc
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" \
	"$(DESTDIR)$(includeexecdir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 = $(MPF_OBJECTS) $(FFT_OBJECTS) $(MPZ_OBJECTS) \
	$(MPQ_OBJECTS) $(MPN_OBJECTS) $(PRINTF_OBJECTS) \
	$(SCANF_OBJECTS)
am__objects_1 = assert.lo compat.lo errno.lo extract-dbl.lo invalid.lo \
	memory.lo mp_bpl.lo mp_clz_tab.lo mp_dv_tab.lo mp_minv_tab.lo \
	mp_get_fns.lo mp_set_fns.lo randclr.lo randdef.lo randiset.lo \
	randlc2s.lo randlc2x.lo randmt.lo randmts.lo rands.lo \
	randsd.lo randsdui.lo randbui.lo randmui.lo primesieve.lo \
	nextprime.lo version.lo
am_libgmp_la_OBJECTS = $(am__objects_1)
libgmp_la_OBJECTS = $(am_libgmp_la_OBJECTS)
libgmp_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(libgmp_la_LDFLAGS) $(LDFLAGS) -o $@
@WANT_GMPCOMPAT_TRUE@am_libgmp_la_rpath = -rpath $(libdir)
am__objects_2 = dummy.lo
am_libgmpxx_la_OBJECTS = $(am__objects_2)
libgmpxx_la_OBJECTS = $(am_libgmpxx_la_OBJECTS)
libgmpxx_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
	$(CXXFLAGS) $(libgmpxx_la_LDFLAGS) $(LDFLAGS) -o $@
@WANT_CXX_TRUE@@WANT_GMPCOMPAT_TRUE@am_libgmpxx_la_rpath = -rpath \
@WANT_CXX_TRUE@@WANT_GMPCOMPAT_TRUE@	$(libdir)
am_libmpir_la_OBJECTS = assert.lo compat.lo errno.lo extract-dbl.lo \
	invalid.lo memory.lo mp_bpl.lo mp_clz_tab.lo mp_dv_tab.lo \
	mp_minv_tab.lo mp_get_fns.lo mp_set_fns.lo randclr.lo \
	randdef.lo randiset.lo randlc2s.lo randlc2x.lo randmt.lo \
	randmts.lo rands.lo randsd.lo randsdui.lo randbui.lo \
	randmui.lo primesieve.lo nextprime.lo version.lo
libmpir_la_OBJECTS = $(am_libmpir_la_OBJECTS)
libmpir_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(libmpir_la_LDFLAGS) $(LDFLAGS) -o $@
am_libmpirxx_la_OBJECTS = dummy.lo
libmpirxx_la_OBJECTS = $(am_libmpirxx_la_OBJECTS)
libmpirxx_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
	$(CXXFLAGS) $(libmpirxx_la_LDFLAGS) $(LDFLAGS) -o $@
@WANT_CXX_TRUE@am_libmpirxx_la_rpath = -rpath $(libdir)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(libgmp_la_SOURCES) $(EXTRA_libgmp_la_SOURCES) \
	$(libgmpxx_la_SOURCES) $(libmpir_la_SOURCES) \
	$(EXTRA_libmpir_la_SOURCES) $(libmpirxx_la_SOURCES)
DIST_SOURCES = $(libgmp_la_SOURCES) $(EXTRA_libgmp_la_SOURCES) \
	$(libgmpxx_la_SOURCES) $(libmpir_la_SOURCES) \
	$(EXTRA_libmpir_la_SOURCES) $(libmpirxx_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__include_HEADERS_DIST = mpirxx.h
HEADERS = $(include_HEADERS) $(nodist_includeexec_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = tests yasm mpn fft mpz mpq mpf printf scanf cxx tune \
	doc
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.bz2 $(distdir).tar.lz $(distdir).tar.xz
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ABI = @ABI@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITS_PER_MP_LIMB = @BITS_PER_MP_LIMB@
CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
CC = @CC@
CCAS = @CCAS@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPP_FOR_BUILD = @CPP_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
DEFS = @DEFS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GMP_CC = @GMP_CC@
GMP_CFLAGS = @GMP_CFLAGS@
GMP_LDFLAGS = @GMP_LDFLAGS@
GMP_NAIL_BITS = @GMP_NAIL_BITS@
GREP = @GREP@
GSYM_FLAG = @GSYM_FLAG@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
LIBGMP_DLL = @LIBGMP_DLL@
LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
LIBM = @LIBM@
LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPIR_AS = @MPIR_AS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_FORMAT = @OBJECT_FORMAT@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
STRIP = @STRIP@
TAL_OBJECT = @TAL_OBJECT@
TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
U_FOR_BUILD = @U_FOR_BUILD@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gmp_srclinks = @gmp_srclinks@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
mpn_objects = @mpn_objects@
mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
LIBGMP_LT_CURRENT = 16
LIBGMP_LT_REVISION = 0 
LIBGMP_LT_AGE = 6
LIBGMPXX_LT_CURRENT = 8
LIBGMPXX_LT_REVISION = 0 
LIBGMPXX_LT_AGE = 4
SUBDIRS = tests $(am__append_1) mpn fft mpz mpq mpf printf scanf cxx \
	tune doc
EXTRA_DIST = configfsf.guess configfsf.sub .gdbinit INSTALL.autoconf \
	mpirxx.h yasm_macwin.inc.fat yasm_macwin.inc.nofat \
	yasm_mac.inc.fat yasm_mac.inc.nofat strip_fPIC.sh mpn/x86w \
	mpn/x86_64w build.vc10 win doc/devel doc/fdl.texi cpuid.c \
	gpl-2.0.txt lgpl-2.1.txt
@WANT_CXX_TRUE@GMPXX_HEADERS_OPTION = mpirxx.h

# mpir.h is architecture dependent, mainly since they encode the
# limb size used in libmpir.  For that reason they belong under $exec_prefix
# not $prefix, strictly speaking.
#
# $exec_prefix/include is not in the default include path for gcc built to
# the same $prefix and $exec_prefix, which might mean mpir.h is not found,
# but anyone knowledgable enough to be playing with exec_prefix will be able
# to address that.
#
includeexecdir = $(exec_prefix)/include
include_HEADERS = $(GMPXX_HEADERS_OPTION)
nodist_includeexec_HEADERS = mpir.h $(am__append_4) $(am__append_6)
lib_LTLIBRARIES = libmpir.la $(am__append_2) \
	$(GMPXX_LTLIBRARIES_OPTION)
BUILT_SOURCES = mpir.h $(am__append_3) $(am__append_5) mpn/dummy1.c
DISTCLEANFILES = $(BUILT_SOURCES) config.m4 fat.h @gmp_srclinks@

# Tell mpir.h it's building gmp, not an application, used by windows DLL stuff.
INCLUDES = -D__GMP_WITHIN_GMP
MPF_OBJECTS = mpf/abs$U.lo mpf/add$U.lo mpf/add_ui$U.lo \
	mpf/ceilfloor$U.lo mpf/clear$U.lo mpf/clears$U.lo mpf/cmp$U.lo \
	mpf/cmp_d$U.lo mpf/cmp_si$U.lo mpf/cmp_ui$U.lo mpf/div$U.lo \
	mpf/div_2exp$U.lo mpf/div_ui$U.lo mpf/dump$U.lo mpf/eq$U.lo \
	mpf/fits_si$U.lo mpf/fits_sint$U.lo mpf/fits_slong$U.lo \
	mpf/fits_sshort$U.lo mpf/fits_ui$U.lo mpf/fits_uint$U.lo \
	mpf/fits_ulong$U.lo mpf/fits_ushort$U.lo mpf/get_d$U.lo \
	mpf/get_d_2exp$U.lo mpf/get_dfl_prec$U.lo mpf/get_prc$U.lo \
	mpf/get_si$U.lo mpf/get_str$U.lo mpf/get_ui$U.lo mpf/init$U.lo \
	mpf/init2$U.lo mpf/inits$U.lo mpf/inp_str$U.lo mpf/int_p$U.lo \
	mpf/iset$U.lo mpf/iset_d$U.lo mpf/iset_si$U.lo \
	mpf/iset_str$U.lo mpf/iset_ui$U.lo mpf/mul$U.lo \
	mpf/mul_2exp$U.lo mpf/mul_ui$U.lo mpf/neg$U.lo \
	mpf/out_str$U.lo mpf/pow_ui$U.lo mpf/random2$U.lo \
	mpf/reldiff$U.lo mpf/rrandomb$U.lo mpf/set$U.lo mpf/set_d$U.lo \
	mpf/set_dfl_prec$U.lo mpf/set_prc$U.lo mpf/set_prc_raw$U.lo \
	mpf/set_q$U.lo mpf/set_si$U.lo mpf/set_str$U.lo \
	mpf/set_ui$U.lo mpf/set_z$U.lo mpf/size$U.lo mpf/sqrt$U.lo \
	mpf/sqrt_ui$U.lo mpf/sub$U.lo mpf/sub_ui$U.lo mpf/swap$U.lo \
	mpf/trunc$U.lo mpf/ui_div$U.lo mpf/ui_sub$U.lo \
	mpf/urandomb$U.lo
FFT_OBJECTS = fft/adjust$U.lo fft/adjust_sqrt2$U.lo fft/butterfly_lshB$U.lo fft/butterfly_rshB$U.lo fft/combine_bits$U.lo fft/div_2expmod_2expp1$U.lo fft/fermat_to_mpz$U.lo fft/fft_mfa_trunc_sqrt2$U.lo fft/fft_mfa_trunc_sqrt2_inner$U.lo fft/fft_negacyclic$U.lo fft/fft_radix2$U.lo fft/fft_trunc$U.lo fft/fft_trunc_sqrt2$U.lo fft/ifft_mfa_trunc_sqrt2$U.lo fft/ifft_negacyclic$U.lo fft/ifft_radix2$U.lo fft/ifft_trunc$U.lo fft/ifft_trunc_sqrt2$U.lo fft/mul_2expmod_2expp1$U.lo fft/mul_fft_main$U.lo fft/mul_mfa_trunc_sqrt2$U.lo fft/mul_trunc_sqrt2$U.lo fft/mulmod_2expp1$U.lo fft/normmod_2expp1$U.lo fft/revbin$U.lo fft/split_bits$U.lo 
MPZ_OBJECTS = mpz/2fac_ui$U.lo mpz/abs$U.lo mpz/add$U.lo \
	mpz/add_ui$U.lo mpz/and$U.lo mpz/aorsmul$U.lo \
	mpz/aorsmul_i$U.lo mpz/array_init$U.lo mpz/bin_ui$U.lo \
	mpz/bin_uiui$U.lo mpz/cdiv_q$U.lo mpz/cdiv_q_ui$U.lo \
	mpz/cdiv_qr$U.lo mpz/cdiv_qr_ui$U.lo mpz/cdiv_r$U.lo \
	mpz/cdiv_r_ui$U.lo mpz/cdiv_ui$U.lo mpz/cfdiv_q_2exp$U.lo \
	mpz/cfdiv_r_2exp$U.lo mpz/clear$U.lo mpz/clears$U.lo \
	mpz/clrbit$U.lo mpz/cmp$U.lo mpz/cmp_d$U.lo mpz/cmp_si$U.lo \
	mpz/cmp_ui$U.lo mpz/cmpabs$U.lo mpz/cmpabs_d$U.lo \
	mpz/cmpabs_ui$U.lo mpz/com$U.lo mpz/combit$U.lo mpz/cong$U.lo \
	mpz/cong_2exp$U.lo mpz/cong_ui$U.lo mpz/dive_ui$U.lo \
	mpz/divegcd$U.lo mpz/divexact$U.lo mpz/divis$U.lo \
	mpz/divis_2exp$U.lo mpz/divis_ui$U.lo mpz/dump$U.lo \
	mpz/export$U.lo mpz/fac_ui$U.lo mpz/fdiv_q$U.lo \
	mpz/fdiv_q_ui$U.lo mpz/fdiv_qr$U.lo mpz/fdiv_qr_ui$U.lo \
	mpz/fdiv_r$U.lo mpz/fdiv_r_ui$U.lo mpz/fdiv_ui$U.lo \
	mpz/fib2_ui$U.lo mpz/fib_ui$U.lo mpz/fits_si$U.lo \
	mpz/fits_sint$U.lo mpz/fits_slong$U.lo mpz/fits_sshort$U.lo \
	mpz/fits_ui$U.lo mpz/fits_uint$U.lo mpz/fits_ulong$U.lo \
	mpz/fits_ushort$U.lo mpz/gcd$U.lo mpz/gcd_ui$U.lo \
	mpz/gcdext$U.lo mpz/get_d$U.lo mpz/get_d_2exp$U.lo \
	mpz/get_si$U.lo mpz/get_str$U.lo mpz/get_sx$U.lo \
	mpz/get_ui$U.lo mpz/get_ux$U.lo mpz/getlimbn$U.lo \
	mpz/hamdist$U.lo mpz/import$U.lo mpz/init$U.lo mpz/init2$U.lo \
	mpz/inits$U.lo mpz/inp_raw$U.lo mpz/inp_str$U.lo \
	mpz/invert$U.lo mpz/ior$U.lo mpz/iset$U.lo mpz/iset_d$U.lo \
	mpz/iset_si$U.lo mpz/iset_str$U.lo mpz/iset_sx$U.lo \
	mpz/iset_ui$U.lo mpz/iset_ux$U.lo mpz/jacobi$U.lo \
	mpz/kronsz$U.lo mpz/kronuz$U.lo mpz/kronzs$U.lo \
	mpz/kronzu$U.lo mpz/lcm$U.lo mpz/lcm_ui$U.lo \
	mpz/likely_prime_p$U.lo mpz/lucnum2_ui$U.lo mpz/lucnum_ui$U.lo \
	mpz/mfac_uiui$U.lo mpz/miller_rabin$U.lo mpz/millerrabin$U.lo \
	mpz/mod$U.lo mpz/mul$U.lo mpz/mul_2exp$U.lo mpz/mul_si$U.lo \
	mpz/mul_ui$U.lo mpz/n_pow_ui$U.lo mpz/neg$U.lo \
	mpz/next_prime_candidate$U.lo mpz/nextprime$U.lo \
	mpz/nthroot$U.lo mpz/oddfac_1$U.lo mpz/out_raw$U.lo \
	mpz/out_str$U.lo mpz/perfpow$U.lo mpz/perfsqr$U.lo \
	mpz/popcount$U.lo mpz/pow_ui$U.lo mpz/powm$U.lo \
	mpz/powm_ui$U.lo mpz/pprime_p$U.lo mpz/primorial_ui$U.lo \
	mpz/probable_prime_p$U.lo mpz/prodlimbs$U.lo mpz/realloc$U.lo \
	mpz/realloc2$U.lo mpz/remove$U.lo mpz/root$U.lo \
	mpz/rootrem$U.lo mpz/rrandomb$U.lo mpz/scan0$U.lo \
	mpz/scan1$U.lo mpz/set$U.lo mpz/set_d$U.lo mpz/set_f$U.lo \
	mpz/set_q$U.lo mpz/set_si$U.lo mpz/set_str$U.lo \
	mpz/set_sx$U.lo mpz/set_ui$U.lo mpz/set_ux$U.lo \
	mpz/setbit$U.lo mpz/size$U.lo mpz/sizeinbase$U.lo \
	mpz/sqrt$U.lo mpz/sqrtrem$U.lo mpz/sub$U.lo mpz/sub_ui$U.lo \
	mpz/swap$U.lo mpz/tdiv_q$U.lo mpz/tdiv_q_2exp$U.lo \
	mpz/tdiv_q_ui$U.lo mpz/tdiv_qr$U.lo mpz/tdiv_qr_ui$U.lo \
	mpz/tdiv_r$U.lo mpz/tdiv_r_2exp$U.lo mpz/tdiv_r_ui$U.lo \
	mpz/tdiv_ui$U.lo mpz/trial_division$U.lo mpz/tstbit$U.lo \
	mpz/ui_pow_ui$U.lo mpz/ui_sub$U.lo mpz/urandomb$U.lo \
	mpz/urandomm$U.lo mpz/xor$U.lo
MPQ_OBJECTS = mpq/abs$U.lo mpq/aors$U.lo mpq/canonicalize$U.lo mpq/clear$U.lo mpq/clears$U.lo mpq/cmp$U.lo mpq/cmp_si$U.lo mpq/cmp_ui$U.lo mpq/div$U.lo mpq/equal$U.lo mpq/get_d$U.lo mpq/get_den$U.lo mpq/get_num$U.lo mpq/get_str$U.lo mpq/init$U.lo mpq/inits$U.lo mpq/inp_str$U.lo mpq/inv$U.lo mpq/md_2exp$U.lo mpq/mul$U.lo mpq/neg$U.lo mpq/out_str$U.lo mpq/set$U.lo mpq/set_d$U.lo mpq/set_den$U.lo mpq/set_f$U.lo mpq/set_num$U.lo mpq/set_si$U.lo mpq/set_str$U.lo mpq/set_ui$U.lo mpq/set_z$U.lo mpq/swap$U.lo 
MPN_OBJECTS = mpn/dummy1$U.lo
PRINTF_OBJECTS = printf/asprintf$U.lo printf/asprntffuns$U.lo printf/doprnt$U.lo printf/doprntf$U.lo printf/doprnti$U.lo printf/fprintf$U.lo printf/obprintf$U.lo printf/obprntffuns$U.lo printf/obvprintf$U.lo printf/printf$U.lo printf/printffuns$U.lo printf/repl-vsnprintf$U.lo printf/snprintf$U.lo printf/snprntffuns$U.lo printf/sprintf$U.lo printf/sprintffuns$U.lo printf/vasprintf$U.lo printf/vfprintf$U.lo printf/vprintf$U.lo printf/vsnprintf$U.lo printf/vsprintf$U.lo 
SCANF_OBJECTS = scanf/doscan$U.lo scanf/fscanf$U.lo scanf/fscanffuns$U.lo scanf/scanf$U.lo scanf/sscanf$U.lo scanf/sscanffuns$U.lo scanf/vfscanf$U.lo scanf/vscanf$U.lo scanf/vsscanf$U.lo 

# no $U for C++ files
CXX_OBJECTS = \
  cxx/isfuns.lo cxx/ismpf.lo cxx/ismpq.lo cxx/ismpz.lo cxx/ismpznw.lo	\
  cxx/osdoprnti.lo cxx/osfuns.lo					\
  cxx/osmpf.lo cxx/osmpq.lo cxx/osmpz.lo


# In libtool 1.5 it doesn't work to build libmpir.la from the convenience
# libraries like mpz/libmpz.la.  Or rather it works, but it ends up putting
# PIC objects into libmpir.a if shared and static are both built.  (The PIC
# objects go into mpz/.libs/libmpz.a, and thence into .libs/libmpir.a.)
#
# For now the big lists of objects above are used.  Something like mpz/*.lo
# would probably work, but might risk missing something out or getting
# something extra.  The source files for each .lo are listed in the
# Makefile.am's in the subdirectories.
#
# Currently, for libmpir, unlike libmp below, we're not using
# -export-symbols, since the tune and speed programs, and perhaps some of
# the test programs, want to access undocumented symbols.
libmpir_la_SOURCES = gmp-impl.h longlong_pre.h longlong_post.h randmt.h			\
  assert.c compat.c errno.c extract-dbl.c invalid.c memory.c		\
  mp_bpl.c mp_clz_tab.c mp_dv_tab.c mp_minv_tab.c mp_get_fns.c mp_set_fns.c \
  randclr.c randdef.c randiset.c randlc2s.c randlc2x.c randmt.c	\
  randmts.c rands.c randsd.c randsdui.c randbui.c randmui.c primesieve.c \
  nextprime.c version.c

EXTRA_libmpir_la_SOURCES = tal-debug.c tal-notreent.c tal-reent.c
libmpir_la_DEPENDENCIES = @TAL_OBJECT@		\
  $(MPF_OBJECTS) $(FFT_OBJECTS) $(MPZ_OBJECTS) $(MPQ_OBJECTS)	\
  $(MPN_OBJECTS) @mpn_objs_in_libgmp@		\
  $(PRINTF_OBJECTS)  $(SCANF_OBJECTS)

libmpir_la_LIBADD = $(libmpir_la_DEPENDENCIES)
libmpir_la_LDFLAGS = $(GMP_LDFLAGS) $(LIBGMP_LDFLAGS) \
  -version-info $(LIBGMP_LT_CURRENT):$(LIBGMP_LT_REVISION):$(LIBGMP_LT_AGE)

libgmp_la_SOURCES = $(libmpir_la_SOURCES)
EXTRA_libgmp_la_SOURCES = $(EXTRA_libmpir_la_SOURCES)
libgmp_la_DEPENDENCIES = @TAL_OBJECT@		\
  $(MPF_OBJECTS) $(FFT_OBJECTS) $(MPZ_OBJECTS) $(MPQ_OBJECTS)	\
  $(MPN_OBJECTS) @mpn_objs_in_libgmp@		\
  $(PRINTF_OBJECTS)  $(SCANF_OBJECTS)

libgmp_la_LIBADD = $(libgmp_la_DEPENDENCIES)
libgmp_la_LDFLAGS = $(GMP_LDFLAGS) $(LIBGMP_LDFLAGS) \
  -version-info $(LIBGMP_LT_CURRENT):$(LIBGMP_LT_REVISION):$(LIBGMP_LT_AGE)


# We need at least one .cc file in $(libmpirxx_la_SOURCES) so automake will
# use $(CXXLINK) rather than the plain C $(LINK).  cxx/dummy.cc is that
# file.
@WANT_CXX_TRUE@GMPXX_LTLIBRARIES_OPTION = libmpirxx.la $(am__append_7)
libmpirxx_la_SOURCES = cxx/dummy.cc
libmpirxx_la_DEPENDENCIES = $(CXX_OBJECTS) libmpir.la
libmpirxx_la_LIBADD = $(libmpirxx_la_DEPENDENCIES)
libmpirxx_la_LDFLAGS = $(GMP_LDFLAGS) $(LIBGMPXX_LDFLAGS) \
  -version-info $(LIBGMPXX_LT_CURRENT):$(LIBGMPXX_LT_REVISION):$(LIBGMPXX_LT_AGE)

libgmpxx_la_SOURCES = $(libmpirxx_la_SOURCES)
libgmpxx_la_DEPENDENCIES = $(CXX_OBJECTS) libgmp.la
libgmpxx_la_LIBADD = $(libgmpxx_la_DEPENDENCIES)
libgmpxx_la_LDFLAGS = $(libmpirxx_la_LDFLAGS)
all: $(BUILT_SOURCES) config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .cc .lo .o .obj
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu --ignore-deps Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@if test ! -f $@; then rm -f stamp-h1; else :; fi
	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi

stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
longlong.h: $(top_builddir)/config.status $(srcdir)/longlong_pre.h $(srcdir)/longlong_post.h
	cd $(top_builddir) && $(SHELL) ./config.status $@
yasm/config/config.guess: $(top_builddir)/config.status $(srcdir)/configfsf.guess
	cd $(top_builddir) && $(SHELL) ./config.status $@
yasm/config/config.sub: $(top_builddir)/config.status $(srcdir)/configfsf.sub
	cd $(top_builddir) && $(SHELL) ./config.status $@
yasm/configure.gnu: $(top_builddir)/config.status $(srcdir)/configure.yasm
	cd $(top_builddir) && $(SHELL) ./config.status $@
mpir.h: $(top_builddir)/config.status $(srcdir)/gmp-h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gmp.h: $(top_builddir)/config.status $(srcdir)/gmp-h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gmpxx.h: $(top_builddir)/config.status $(srcdir)/mpirxx.h
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
	}

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libgmp.la: $(libgmp_la_OBJECTS) $(libgmp_la_DEPENDENCIES) $(EXTRA_libgmp_la_DEPENDENCIES) 
	$(libgmp_la_LINK) $(am_libgmp_la_rpath) $(libgmp_la_OBJECTS) $(libgmp_la_LIBADD) $(LIBS)
libgmpxx.la: $(libgmpxx_la_OBJECTS) $(libgmpxx_la_DEPENDENCIES) $(EXTRA_libgmpxx_la_DEPENDENCIES) 
	$(libgmpxx_la_LINK) $(am_libgmpxx_la_rpath) $(libgmpxx_la_OBJECTS) $(libgmpxx_la_LIBADD) $(LIBS)
libmpir.la: $(libmpir_la_OBJECTS) $(libmpir_la_DEPENDENCIES) $(EXTRA_libmpir_la_DEPENDENCIES) 
	$(libmpir_la_LINK) -rpath $(libdir) $(libmpir_la_OBJECTS) $(libmpir_la_LIBADD) $(LIBS)
libmpirxx.la: $(libmpirxx_la_OBJECTS) $(libmpirxx_la_DEPENDENCIES) $(EXTRA_libmpirxx_la_DEPENDENCIES) 
	$(libmpirxx_la_LINK) $(am_libmpirxx_la_rpath) $(libmpirxx_la_OBJECTS) $(libmpirxx_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

.c.o:
	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -c -o $@ $<

.cc.o:
	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -c -o $@ $<

dummy.lo: cxx/dummy.cc
	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o dummy.lo `test -f 'cxx/dummy.cc' || echo '$(srcdir)/'`cxx/dummy.cc

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
install-nodist_includeexecHEADERS: $(nodist_includeexec_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(includeexecdir)" || $(MKDIR_P) "$(DESTDIR)$(includeexecdir)"
	@list='$(nodist_includeexec_HEADERS)'; test -n "$(includeexecdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includeexecdir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includeexecdir)" || exit $$?; \
	done

uninstall-nodist_includeexecHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_includeexec_HEADERS)'; test -n "$(includeexecdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(includeexecdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__remove_distdir)
dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includeexecdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
	mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-includeHEADERS

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-libLTLIBRARIES \
	install-nodist_includeexecHEADERS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \
	uninstall-nodist_includeexecHEADERS

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	ctags-recursive install install-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libLTLIBRARIES clean-libtool ctags ctags-recursive dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-lzma \
	dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
	distclean-compile distclean-generic distclean-hdr \
	distclean-libtool distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-includeHEADERS install-info \
	install-info-am install-libLTLIBRARIES install-man \
	install-nodist_includeexecHEADERS install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-includeHEADERS uninstall-libLTLIBRARIES \
	uninstall-nodist_includeexecHEADERS


	@echo ''
	@echo '+-------------------------------------------------------------+'
	@echo '| CAUTION:                                                    |'
	@echo '|                                                             |'
	@echo '| If you have not already run "make check", then we strongly  |'
	@echo '| recommend you do so.                                        |'
	@echo '|                                                             |'
	@echo '| MPIR has been carefully tested by its authors, but compilers|'
	@echo '| are all too often released with serious bugs.  MPIR tends to|'
	@echo '| explore interesting corners in compilers and has hit bugs   |'
	@echo '| on quite a few occasions.                                   |'
	@echo '|                                                             |'
	@echo '+-------------------------------------------------------------+'
	@echo ''

# The "test -f" support for srcdir!=builddir is similar to the automake .c.o
# etc rules, but with each foo.c explicitly, since $< is not portable
# outside an inference rule.
#
# A quoted 'foo.c' is used with the "test -f"'s to avoid Sun make rewriting
# it as part of its VPATH support.  See the autoconf manual "Limitations of
# Make".
#
# Generated .h files which are used by gmp-impl.h are BUILT_SOURCES since
# they must exist before anything can be compiled.
#
# Other generated .h files are also BUILT_SOURCES so as to get all the
# build-system stuff over and done with at the start.  Also, dependencies on
# the .h files are not properly expressed for the various objects that use
# them.

mpn/dummy1.c:
	echo "void dummy1(void){return;}" > mpn/dummy1.c

# Avoid: CVS - cvs directories
#        *~  - emacs backups
#        .#* - cvs merge originals
#
# *~ and .#* only occur when a whole directory without it's own Makefile.am
# is distributed, like "doc" or the mpn cpu subdirectories.
#
dist-hook:
	-find $(distdir) \( -name CVS -type d \) -o -name "*~" -o -name ".#*" -o -name ".svn" | xargs rm -rf
	rm -f $(distdir)/yasm/Makefile.in
	(  VAR=0 ; \
	   IFS=$(echo -e "\n") ; \
	   cat $(srcdir)/yasm/Makefile.in | while read -r LINE ; do \
	   if test `echo $$LINE | grep -ce "^[[:alpha:]]"` -eq 1  ; then VAR=0 ; fi ;  \
	   if test `echo $$LINE | grep -ce "^install:"` -eq 1  ; then VAR=1 ; echo "install:" ; fi ; \
	   if test `echo $$VAR` -eq 0 ; then /bin/echo -E "$$LINE" ; fi ; done ) |	\
	(  VAR=0 ; \
	   IFS=$(echo -e "\n") ; \
	   while read -r LINE ; do \
	   if test `echo $$LINE | grep -ce "^[[:alpha:]]"` -eq 1  ; then VAR=0 ; fi ;  \
	   if test `echo $$LINE | grep -ce "^check:"` -eq 1  ; then VAR=1 ; echo "check:" ; fi ; \
	   if test `echo $$VAR` -eq 0 ; then /bin/echo -E "$$LINE" ; fi ; done ) > $(distdir)/yasm/Makefile.in

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: