# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright 2000, 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at your
# option) any later version.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with the GNU MP Library; see the file COPYING.LIB.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.

# Copyright 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation,
# Inc.
#
# Copyright 2008 William Hart
#
# This file is part of the MPIR Library.
#
# The MPIR Library is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at your
# option) any later version.
#
# The MPIR Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with the MPIR Library; see the file COPYING.LIB.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
EXTRA_PROGRAMS = speed$(EXEEXT) speed-dynamic$(EXEEXT) \
	speed-ext$(EXEEXT) tuneup$(EXEEXT)
DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/../mpn/Makeasm.am \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in
subdir = tune
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__DEPENDENCIES_1 =
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) \
	$(top_builddir)/tests/libtests.la $(top_builddir)/libmpir.la
am_libspeed_la_OBJECTS = common.lo divrem1div.lo divrem1inv.lo \
	divrem2div.lo divrem2inv.lo freq.lo gcd_bin.lo gcdextod.lo \
	gcdextos.lo jacbase1.lo jacbase2.lo jacbase3.lo mod_1_div.lo \
	mod_1_inv.lo modlinv.lo noop.lo powm_mod.lo powm_redc.lo \
	preinv_divrem_1.lo fac_ui_large.lo fac_ui_small.lo set_strb.lo \
	set_strs.lo set_strp.lo time.lo
libspeed_la_OBJECTS = $(am_libspeed_la_OBJECTS)
libspeed_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(libspeed_la_LDFLAGS) $(LDFLAGS) -o $@
am_speed_OBJECTS = speed.$(OBJEXT)
speed_OBJECTS = $(am_speed_OBJECTS)
speed_LDADD = $(LDADD)
speed_DEPENDENCIES = $(DEPENDENCIES)
speed_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(speed_LDFLAGS) \
	$(LDFLAGS) -o $@
am_speed_dynamic_OBJECTS = speed.$(OBJEXT)
speed_dynamic_OBJECTS = $(am_speed_dynamic_OBJECTS)
speed_dynamic_LDADD = $(LDADD)
speed_dynamic_DEPENDENCIES = $(DEPENDENCIES)
am_speed_ext_OBJECTS = speed-ext.$(OBJEXT)
speed_ext_OBJECTS = $(am_speed_ext_OBJECTS)
speed_ext_LDADD = $(LDADD)
speed_ext_DEPENDENCIES = $(DEPENDENCIES)
speed_ext_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(speed_ext_LDFLAGS) $(LDFLAGS) -o $@
am_tuneup_OBJECTS = tuneup.$(OBJEXT)
am__objects_1 = divrem_2.$(OBJEXT) gcd.$(OBJEXT) gcdext.$(OBJEXT) \
	get_str.$(OBJEXT) mul_n.$(OBJEXT) mullow_n.$(OBJEXT) \
	mulhigh_n.$(OBJEXT) mul.$(OBJEXT) tdiv_qr.$(OBJEXT) \
	toom4_mul_n.$(OBJEXT) toom4_mul.$(OBJEXT) toom3_mul.$(OBJEXT) \
	toom3_mul_n.$(OBJEXT) toom8h_mul.$(OBJEXT) \
	toom8_sqr_n.$(OBJEXT) mulmod_2expm1.$(OBJEXT) \
	rootrem.$(OBJEXT) divrem_euclidean_r_1.$(OBJEXT) \
	divrem_hensel_qr_1.$(OBJEXT) rsh_divrem_hensel_qr_1.$(OBJEXT) \
	dc_divappr_q.$(OBJEXT) dc_div_qr.$(OBJEXT) \
	dc_div_qr_n.$(OBJEXT) inv_divappr_q.$(OBJEXT) \
	inv_div_qr.$(OBJEXT) tdiv_q.$(OBJEXT) dc_bdiv_qr.$(OBJEXT) \
	dc_bdiv_qr_n.$(OBJEXT) dc_bdiv_q.$(OBJEXT)
am__objects_2 = split_bits.$(OBJEXT) revbin.$(OBJEXT) \
	normmod_2expp1.$(OBJEXT) mulmod_2expp1.$(OBJEXT) \
	mul_trunc_sqrt2.$(OBJEXT) mul_mfa_trunc_sqrt2.$(OBJEXT) \
	mul_fft_main.$(OBJEXT) mul_2expmod_2expp1.$(OBJEXT) \
	ifft_trunc_sqrt2.$(OBJEXT) ifft_trunc.$(OBJEXT) \
	ifft_radix2.$(OBJEXT) ifft_negacyclic.$(OBJEXT) \
	fft_trunc.$(OBJEXT) fft_radix2.$(OBJEXT) \
	fft_negacylic.$(OBJEXT) fft_mfa_trunc_sqrt2.$(OBJEXT) \
	fft_mfa_trunc_sqrt2_inner.$(OBJEXT) fermat_to_mpz.$(OBJEXT) \
	div_2expmod_2expp1.$(OBJEXT) combine_bits.$(OBJEXT) \
	butterfly_rshB.$(OBJEXT) butterfly_lshB.$(OBJEXT) \
	adjust_sqrt2.$(OBJEXT) adjust.$(OBJEXT)
am__objects_3 = $(am__objects_1) $(am__objects_2) divrem_1.$(OBJEXT) \
	mod_1.$(OBJEXT)
nodist_tuneup_OBJECTS = sqr_basecase.$(OBJEXT) $(am__objects_3)
tuneup_OBJECTS = $(am_tuneup_OBJECTS) $(nodist_tuneup_OBJECTS)
am__DEPENDENCIES_3 = $(am__DEPENDENCIES_1) libspeed.la
tuneup_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(tuneup_LDFLAGS) \
	$(LDFLAGS) -o $@
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(libspeed_la_SOURCES) $(speed_SOURCES) \
	$(speed_dynamic_SOURCES) $(speed_ext_SOURCES) \
	$(tuneup_SOURCES) $(nodist_tuneup_SOURCES)
DIST_SOURCES = $(libspeed_la_SOURCES) $(speed_SOURCES) \
	$(speed_dynamic_SOURCES) $(speed_ext_SOURCES) \
	$(tuneup_SOURCES)
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ABI = @ABI@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITS_PER_MP_LIMB = @BITS_PER_MP_LIMB@
CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
CC = @CC@
CCAS = @CCAS@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPP_FOR_BUILD = @CPP_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
DEFS = @DEFS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GMP_CC = @GMP_CC@
GMP_CFLAGS = @GMP_CFLAGS@
GMP_LDFLAGS = @GMP_LDFLAGS@
GMP_NAIL_BITS = @GMP_NAIL_BITS@
GREP = @GREP@
GSYM_FLAG = @GSYM_FLAG@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
LIBGMP_DLL = @LIBGMP_DLL@
LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
LIBM = @LIBM@
LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPIR_AS = @MPIR_AS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_FORMAT = @OBJECT_FORMAT@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
STRIP = @STRIP@
TAL_OBJECT = @TAL_OBJECT@
TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
U_FOR_BUILD = @U_FOR_BUILD@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gmp_srclinks = @gmp_srclinks@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
mpn_objects = @mpn_objects@
mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/tests
EXTRA_DIST = alpha.asm pentium.asm sparcv9.asm hppa.asm hppa2.asm hppa2w.asm \
  ia64.asm powerpc.asm powerpc64.asm x86_64.as many.pl

noinst_HEADERS = speed.h
@ENABLE_STATIC_FALSE@STATIC = 

# Prefer -static on the speed and tune programs, since that can avoid
# overheads of shared library linkages on some systems.  Libtool tends to
# botch -static if configured with --disable-static, perhaps reasonably
# enough.  In any event under --disable-static the only choice is a dynamic
# link so there's no point in -static.
#
@ENABLE_STATIC_TRUE@STATIC = -static
EXTRA_LTLIBRARIES = libspeed.la
libspeed_la_SOURCES = \
  common.c divrem1div.c divrem1inv.c divrem2div.c divrem2inv.c		\
  freq.c gcd_bin.c 				\
  gcdextod.c gcdextos.c			\
  jacbase1.c jacbase2.c jacbase3.c					\
  mod_1_div.c mod_1_inv.c modlinv.c					\
  noop.c powm_mod.c powm_redc.c preinv_divrem_1.c				\
  fac_ui_large.c fac_ui_small.c						\
  set_strb.c set_strs.c set_strp.c time.c

libspeed_la_DEPENDENCIES = $(SPEED_CYCLECOUNTER_OBJ) \
  $(top_builddir)/tests/libtests.la $(top_builddir)/libmpir.la

libspeed_la_LIBADD = $(libspeed_la_DEPENDENCIES) $(LIBM)
libspeed_la_LDFLAGS = $(STATIC)
DEPENDENCIES = libspeed.la
LDADD = $(DEPENDENCIES)
speed_SOURCES = speed.c
speed_LDFLAGS = $(STATIC)
speed_dynamic_SOURCES = speed.c
speed_ext_SOURCES = speed-ext.c
speed_ext_LDFLAGS = $(STATIC)
tuneup_SOURCES = tuneup.c
nodist_tuneup_SOURCES = sqr_basecase.c $(TUNE_MPN_SRCS)
tuneup_DEPENDENCIES = $(TUNE_SQR_OBJ) libspeed.la
tuneup_LDADD = $(tuneup_DEPENDENCIES)
tuneup_LDFLAGS = $(STATIC)

# $(MANY_CLEAN) and $(MANY_DISTCLEAN) are hooks for many.pl
CLEANFILES = $(EXTRA_PROGRAMS) $(EXTRA_LTLIBRARIES) \
	$(TUNE_MPN_SRCS) sqr_asm.asm \
	stg.gnuplot stg.data \
	mtg.gnuplot mtg.data \
	fibg.gnuplot fibg.data \
	graph.gnuplot graph.data \
	$(MANY_CLEAN)

DISTCLEANFILES = sqr_basecase.c  $(MANY_DISTCLEAN)

# Generating these little files at build time seems better than including
# them in the distribution, since the list can be changed more easily.
#
# mpn/generic/tdiv_qr.c uses mpn_divrem_1 and mpn_divrem_2, but only for 1
# and 2 limb divisors, which are never used during tuning, so it doesn't
# matter whether it picks up a tuned or untuned version of those.
#
# divrem_1 and mod_1 are recompiled renamed to "_tune" to avoid a linking
# problem.  If a native divrem_1 provides an mpn_divrem_1c entrypoint then
# common.c will want that, but the generic divrem_1 doesn't provide it,
# likewise for mod_1.  The simplest way around this is to have the tune
# build versions renamed suitably.
#
# FIXME: Would like say mul_n.c to depend on $(top_builddir)/mul_n.c so the
# recompiled object will be rebuilt if that file changes.
TUNE_MPN_SRCS = $(TUNE_MPN_SRCS_BASIC) $(TUNE_FFT_SRCS_BASIC) divrem_1.c mod_1.c
TUNE_MPN_SRCS_BASIC = divrem_2.c gcd.c gcdext.c get_str.c \
  mul_n.c mullow_n.c mulhigh_n.c mul.c tdiv_qr.c \
  toom4_mul_n.c toom4_mul.c toom3_mul.c toom3_mul_n.c \
  toom8h_mul.c toom8_sqr_n.c mulmod_2expm1.c rootrem.c divrem_euclidean_r_1.c \
  divrem_hensel_qr_1.c rsh_divrem_hensel_qr_1.c dc_divappr_q.c dc_div_qr.c dc_div_qr_n.c \
  inv_divappr_q.c inv_div_qr.c tdiv_q.c dc_bdiv_qr.c dc_bdiv_qr_n.c dc_bdiv_q.c 

TUNE_FFT_SRCS_BASIC = split_bits.c revbin.c normmod_2expp1.c mulmod_2expp1.c \
  mul_trunc_sqrt2.c mul_mfa_trunc_sqrt2.c mul_fft_main.c \
  mul_2expmod_2expp1.c ifft_trunc_sqrt2.c ifft_trunc.c ifft_radix2.c \
  ifft_negacyclic.c fft_trunc.c fft_radix2.c fft_negacylic.c \
  fft_mfa_trunc_sqrt2.c fft_mfa_trunc_sqrt2_inner.c fermat_to_mpz.c \
  div_2expmod_2expp1.c combine_bits.c butterfly_rshB.c butterfly_lshB.c \
  adjust_sqrt2.c adjust.c


# COMPILE minus CC.
#
COMPILE_FLAGS = $(DEFS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(INCLUDES) $(DEFAULT_INCLUDES) 

# Flags used for preprocessing (in ansi2knr rules).
#
PREPROCESS_FLAGS = $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS)


# Recent versions of automake (1.5 and up for instance) append automake
# generated suffixes to this $(SUFFIXES) list.  This is essential for us,
# since .c must come after .s, .S and .asm.  If .c is before .s, for
# instance, then in the mpn directory "make" will see add_n.c mentioned in
# an explicit rule (the ansi2knr stuff) and decide it must have add_n.c,
# even if add_n.c doesn't exist but add_n.s does.  See GNU make
# documentation "(make)Implicit Rule Search", part 5c.
#
# On IRIX 6 native make this doesn't work properly though.  Somehow .c
# remains ahead of .s, perhaps because .c.s is a builtin rule.  .asm works
# fine though, and mpn/mips3 uses this.
#
SUFFIXES = .s .S .as .asm

# can be overridden during development, eg. "make RM_TMP=: mul_1.lo"
RM_TMP = rm -f

#if BUILD_YASM
#ASSEMBLER = $(top_srcdir)/strip_fPIC.sh $(MPIR_AS) -p gas -I $(top_builddir) $(OBJECT_FORMAT) $(GSYM_FLAG) -o $@ 
#else
ASSEMBLER = $(CCAS) $(COMPILE_FLAGS)
all: all-am

.SUFFIXES:
.SUFFIXES: .s .S .as .asm .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../mpn/Makeasm.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps tune/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu --ignore-deps tune/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(srcdir)/../mpn/Makeasm.am:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
libspeed.la: $(libspeed_la_OBJECTS) $(libspeed_la_DEPENDENCIES) $(EXTRA_libspeed_la_DEPENDENCIES) 
	$(libspeed_la_LINK)  $(libspeed_la_OBJECTS) $(libspeed_la_LIBADD) $(LIBS)
speed$(EXEEXT): $(speed_OBJECTS) $(speed_DEPENDENCIES) $(EXTRA_speed_DEPENDENCIES) 
	@rm -f speed$(EXEEXT)
	$(speed_LINK) $(speed_OBJECTS) $(speed_LDADD) $(LIBS)
speed-dynamic$(EXEEXT): $(speed_dynamic_OBJECTS) $(speed_dynamic_DEPENDENCIES) $(EXTRA_speed_dynamic_DEPENDENCIES) 
	@rm -f speed-dynamic$(EXEEXT)
	$(LINK) $(speed_dynamic_OBJECTS) $(speed_dynamic_LDADD) $(LIBS)
speed-ext$(EXEEXT): $(speed_ext_OBJECTS) $(speed_ext_DEPENDENCIES) $(EXTRA_speed_ext_DEPENDENCIES) 
	@rm -f speed-ext$(EXEEXT)
	$(speed_ext_LINK) $(speed_ext_OBJECTS) $(speed_ext_LDADD) $(LIBS)
tuneup$(EXEEXT): $(tuneup_OBJECTS) $(tuneup_DEPENDENCIES) $(EXTRA_tuneup_DEPENDENCIES) 
	@rm -f tuneup$(EXEEXT)
	$(tuneup_LINK) $(tuneup_OBJECTS) $(tuneup_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

.c.o:
	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(HEADERS)
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-libtool ctags distclean distclean-compile \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags uninstall uninstall-am


$(top_builddir)/tests/libtests.la:
	cd $(top_builddir)/tests; $(MAKE) $(AM_MAKEFLAGS) libtests.la

tune:
	$(MAKE) $(AM_MAKEFLAGS) tuneup$(EXEEXT)
	./tuneup

allprogs: $(EXTRA_PROGRAMS)

$(TUNE_MPN_SRCS_BASIC):
	for i in $(TUNE_MPN_SRCS_BASIC); do \
	  echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \
	  echo "#include \"mpn/generic/$$i\"" >>$$i; \
	done

$(TUNE_FFT_SRCS_BASIC):
	for i in $(TUNE_FFT_SRCS_BASIC); do \
	  echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \
	  echo "#include \"fft/$$i\"" >>$$i; \
	done

divrem_1.c:
	echo "#define TUNE_PROGRAM_BUILD 1"                >divrem_1.c
	echo "#define __gmpn_divrem_1  mpn_divrem_1_tune" >>divrem_1.c
	echo "#include \"mpn/generic/divrem_1.c\""        >>divrem_1.c

mod_1.c:
	echo "#define TUNE_PROGRAM_BUILD 1"          >mod_1.c
	echo "#define __gmpn_mod_1  mpn_mod_1_tune" >>mod_1.c
	echo "#include \"mpn/generic/mod_1.c\""     >>mod_1.c

sqr_asm.asm: $(top_builddir)/mpn/sqr_basecase.asm
	echo 'define(SQR_KARATSUBA_THRESHOLD_OVERRIDE,SQR_KARATSUBA_THRESHOLD_MAX)' >sqr_asm.asm
	echo 'include(../mpn/sqr_basecase.asm)' >>sqr_asm.asm

# .s assembler, no preprocessing.
#
.s.o:
	$(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
.s.obj:
	$(CCAS) $(COMPILE_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
.s.lo:
	$(LIBTOOL) --mode=compile --tag=CC $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<

# .S assembler, preprocessed with cpp.
#
# It's necessary to run $(CPP) separately, since it seems not all compilers
# recognise .S files, in particular "cc" on HP-UX 10 and 11 doesn't (and
# will silently do nothing if given a .S).
#
# For .lo we need a helper script, as described below for .asm.lo.
#
.S.o:
	$(CPP) $(PREPROCESS_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< | grep -v '^#' >tmp-$*.s
	$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
	$(RM_TMP) tmp-$*.s
.S.obj:
	$(CPP) $(PREPROCESS_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` | grep -v '^#' >tmp-$*.s
	$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
	$(RM_TMP) tmp-$*.s
.S.lo:
	$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/cpp-ccas --cpp="$(CPP) $(PREPROCESS_FLAGS)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<

# .asm assembler, preprocessed with m4 unless we are in MINGW64
#
# .o and .obj are non-PIC and just need m4 followed by a compile.
#
# .lo is a bit tricky.  Libtool (as of version 1.5) has foo.lo as a little
# text file, and .libs/foo.o and foo.o as the PIC and non-PIC objects,
# respectively.  It'd be asking for lots of trouble to try to create foo.lo
# ourselves, so instead arrange to invoke libtool like a --mode=compile, but
# with a special m4-ccas script which first m4 preprocesses, then compiles.
# --tag=CC is necessary since foo.asm is otherwise unknown to libtool.
#
# Libtool adds -DPIC when building a shared object and the .asm files look
# for that.  But it should be noted that the other PIC flags are on occasion
# important too, in particular FreeBSD 2.2.8 gas 1.92.3 requires -k before
# it accepts PIC constructs like @GOT, and gcc adds that flag only under
# -fPIC.  (Later versions of gas are happy to accept PIC stuff any time.)
#

.asm.o:
	$(M4) -DOPERATION_$* `test -f '$<' || echo '$(srcdir)/'`$< >tmp-$*.s
	$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
	$(RM_TMP) tmp-$*.s
.asm.obj:
	$(M4) -DOPERATION_$* `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` >tmp-$*.s
	$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
	$(RM_TMP) tmp-$*.s
#endif

.asm.lo:
	$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/m4-ccas --m4="$(M4)" $(ASSEMBLER) `test -f '$<' || echo '$(srcdir)/'`$<

#  .as assembler, assembled with Yasm

.as.lo:
	$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/strip_fPIC.sh $(MPIR_AS) -I $(top_builddir) $(OBJECT_FORMAT) $(GSYM_FLAG) -o $@ `test -f '$<' || echo '$(srcdir)/'`$<

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: