# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright 2003 Free Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at your
# option) any later version.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with the GNU MP Library; see the file COPYING.LIB.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(gmp_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/stamp-vti \
	$(srcdir)/version.texi mdate-sh texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/gmp.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = gmp.dvi
PDFS = gmp.pdf
PSS = gmp.ps
HTMLS = gmp.html
TEXINFOS = gmp.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)"
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ABI = @ABI@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITS_PER_MP_LIMB = @BITS_PER_MP_LIMB@
CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
CC = @CC@
CCAS = @CCAS@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPP_FOR_BUILD = @CPP_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
DEFS = @DEFS@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_STATIC_FALSE = @ENABLE_STATIC_FALSE@
ENABLE_STATIC_TRUE = @ENABLE_STATIC_TRUE@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GMP_LDFLAGS = @GMP_LDFLAGS@
GMP_NAIL_BITS = @GMP_NAIL_BITS@
GREP = @GREP@
GSYM_FLAG = @GSYM_FLAG@
HAVE_CLOCK_01 = @HAVE_CLOCK_01@
HAVE_CPUTIME_01 = @HAVE_CPUTIME_01@
HAVE_GETRUSAGE_01 = @HAVE_GETRUSAGE_01@
HAVE_GETTIMEOFDAY_01 = @HAVE_GETTIMEOFDAY_01@
HAVE_HOST_CPU_FAMILY_power = @HAVE_HOST_CPU_FAMILY_power@
HAVE_HOST_CPU_FAMILY_powerpc = @HAVE_HOST_CPU_FAMILY_powerpc@
HAVE_SIGACTION_01 = @HAVE_SIGACTION_01@
HAVE_SIGALTSTACK_01 = @HAVE_SIGALTSTACK_01@
HAVE_SIGSTACK_01 = @HAVE_SIGSTACK_01@
HAVE_STACK_T_01 = @HAVE_STACK_T_01@
HAVE_SYS_RESOURCE_H_01 = @HAVE_SYS_RESOURCE_H_01@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURSES = @LIBCURSES@
LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
LIBGMP_DLL = @LIBGMP_DLL@
LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
LIBM = @LIBM@
LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MPIR_AS = @MPIR_AS@
OBJDUMP = @OBJDUMP@
OBJECT_FORMAT = @OBJECT_FORMAT@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
STRIP = @STRIP@
TAL_OBJECT = @TAL_OBJECT@
TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
U = @U@
U_FOR_BUILD = @U_FOR_BUILD@
VERSION = @VERSION@
WANT_CXX_FALSE = @WANT_CXX_FALSE@
WANT_CXX_TRUE = @WANT_CXX_TRUE@
WANT_MPBSD_FALSE = @WANT_MPBSD_FALSE@
WANT_MPBSD_TRUE = @WANT_MPBSD_TRUE@
WITH_READLINE_01 = @WITH_READLINE_01@
YACC = @YACC@
YFLAGS = @YFLAGS@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gmp_srclinks = @gmp_srclinks@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
mpn_objects = @mpn_objects@
mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
mpn_objs_in_libmp = @mpn_objs_in_libmp@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
EXTRA_DIST = configuration isa_abi_headache projects.html tasks.html
info_TEXINFOS = gmp.texi
gmp_TEXINFOS = fdl.texi
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  --ignore-deps doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  --ignore-deps doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && cd $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  cd $(srcdir); \
	else \
	  rc=$$?; \
	  cd $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/gmp.info: gmp.texi $(srcdir)/version.texi $(gmp_TEXINFOS)
gmp.dvi: gmp.texi $(srcdir)/version.texi $(gmp_TEXINFOS)
gmp.pdf: gmp.texi $(srcdir)/version.texi $(gmp_TEXINFOS)
gmp.html: gmp.texi $(srcdir)/version.texi $(gmp_TEXINFOS)
$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: gmp.texi $(top_srcdir)/configure
	@(dir=.; test -f ./gmp.texi || dir=$(srcdir); \
	set `$(SHELL) $(srcdir)/mdate-sh $$dir/gmp.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
@MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f $(distdir)/$$relfile || \
		cp -p $$file $(distdir)/$$relfile; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf gmp.aux gmp.cp gmp.cps gmp.fn gmp.fns gmp.ky gmp.kys gmp.log gmp.pg \
	  gmp.pgs gmp.tmp gmp.toc gmp.tp gmp.vr gmp.vrs gmp.dvi \
	  gmp.pdf gmp.ps gmp.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-info-am

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	dist-info distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \
	mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: