/* An example of extending the speed program to measure routines not in GMP. Copyright 1999, 2000, 2002, 2003, 2005 Free Software Foundation, Inc. This file is part of the GNU MP Library. The GNU MP Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU MP Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU MP Library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /* The extension here is three versions of an mpn arithmetic mean. These aren't meant to be particularly useful, just examples. You can run something like the following to compare their speeds. ./speed-ext -s 1-20 -c mean_calls mean_open mean_open2 On RISC chips, mean_open() might be fastest if the compiler is doing a good job. On the register starved x86s, mean_calls will be fastest. Notes: SPEED_EXTRA_PROTOS and SPEED_EXTRA_ROUTINES are macros that get expanded by speed.c in useful places. SPEED_EXTRA_PROTOS goes after the header files, and SPEED_EXTRA_ROUTINES goes in the array of available routines. The advantage of this #include "speed.c" scheme is that there's no editing of a copy of that file, and new features in new versions of it will be immediately available. In a real program the routines mean_calls() etc would probably be in separate C or assembler source files, and just the measuring speed_mean_calls() etc would be here. Linking against other libraries for things to measure is perfectly possible too. When attempting to compare two versions of the same named routine, say like the generic and assembler versions of mpn_add_n(), creative use of cc -D or #define is suggested, so one or both can be renamed and linked into the same program. It'll be much easier to compare them side by side than with separate programs for each. common.c has notes on writing speed measuring routines. Remember to link against tune/libspeed.la (or tune/.libs/libspeed.a if not using libtool) to get common.o and other objects needed by speed.c. */ #define SPEED_EXTRA_PROTOS \ double speed_mean_calls(struct speed_params *s); \ double speed_mean_open(struct speed_params *s); \ double speed_mean_open2(struct speed_params *s); #define SPEED_EXTRA_ROUTINES \ { "mean_calls", speed_mean_calls }, \ { "mean_open", speed_mean_open }, \ { "mean_open2", speed_mean_open2 }, #include "speed.c" /* A straightforward implementation calling mpn subroutines. wp,size is set to (xp,size + yp,size) / 2. The return value is the remainder from the division. The other versions are the same. */ mp_limb_t mean_calls (mp_ptr wp, mp_srcptr xp, mp_srcptr yp, mp_size_t size) { mp_limb_t c, ret; ASSERT (size >= 1); c = mpn_add_n (wp, xp, yp, size); ret = mpn_rshift (wp, wp, size, 1) >> (BITS_PER_MP_LIMB-1); wp[size-1] |= (c << (BITS_PER_MP_LIMB-1)); return ret; } /* An open-coded version, making one pass over the data. The right shift is done as the added limbs are produced. The addition code follows mpn/generic/add_n.c. */ mp_limb_t mean_open (mp_ptr wp, mp_srcptr xp, mp_srcptr yp, mp_size_t size) { mp_limb_t w, wprev, x, y, c, ret; mp_size_t i; ASSERT (size >= 1); x = xp[0]; y = yp[0]; wprev = x + y; c = (wprev < x); ret = (wprev & 1); #define RSHIFT(hi,lo) (((lo) >> 1) | ((hi) << (BITS_PER_MP_LIMB-1))) for (i = 1; i < size; i++) { x = xp[i]; y = yp[i]; w = x + c; c = (w < x); w += y; c += (w < y); wp[i-1] = RSHIFT (w, wprev); wprev = w; } wp[i-1] = RSHIFT (c, wprev); return ret; } /* Another one-pass version, but right shifting the source limbs rather than the result limbs. There's not much chance of this being better than the above, but it's an alternative at least. */ mp_limb_t mean_open2 (mp_ptr wp, mp_srcptr xp, mp_srcptr yp, mp_size_t size) { mp_limb_t w, x, y, xnext, ynext, c, ret; mp_size_t i; ASSERT (size >= 1); x = xp[0]; y = yp[0]; /* ret is the low bit of x+y, c is the carry out of that low bit add */ ret = (x ^ y) & 1; c = (x & y) & 1; for (i = 0; i < size-1; i++) { xnext = xp[i+1]; ynext = yp[i+1]; x = RSHIFT (xnext, x); y = RSHIFT (ynext, y); w = x + c; c = (w < x); w += y; c += (w < y); wp[i] = w; x = xnext; y = ynext; } wp[i] = (x >> 1) + (y >> 1) + c; return ret; } /* The speed measuring routines are the same apart from which function they run, so a macro is used. Actually this macro is the same as SPEED_ROUTINE_MPN_BINARY_N. */ #define SPEED_ROUTINE_MEAN(mean_fun) \ { \ unsigned i; \ mp_ptr wp; \ double t; \ TMP_DECL; \ \ SPEED_RESTRICT_COND (s->size >= 1); \ \ TMP_MARK; \ SPEED_TMP_ALLOC_LIMBS (wp, s->size, s->align_wp); \ \ speed_operand_src (s, s->xp, s->size); \ speed_operand_src (s, s->yp, s->size); \ speed_operand_dst (s, wp, s->size); \ speed_cache_fill (s); \ \ speed_starttime (); \ i = s->reps; \ do \ mean_fun (wp, s->xp, s->yp, s->size); \ while (--i != 0); \ t = speed_endtime (); \ \ TMP_FREE; \ return t; \ } double speed_mean_calls (struct speed_params *s) { SPEED_ROUTINE_MEAN (mean_calls); } double speed_mean_open (struct speed_params *s) { SPEED_ROUTINE_MEAN (mean_open); } double speed_mean_open2 (struct speed_params *s) { SPEED_ROUTINE_MEAN (mean_open2); }