libtiff/test/Makefile.am

353 lines
11 KiB
Makefile
Raw Normal View History

2004-08-07 14:20:35 -04:00
# Tag Image File Format (TIFF) Software
#
2006-03-23 09:54:00 -05:00
# Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu>
2004-08-07 14:20:35 -04:00
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
# Process this file with automake to produce Makefile.in.
AUTOMAKE_OPTIONS = 1.12 color-tests parallel-tests foreign
LIBTIFF = $(top_builddir)/libtiff/libtiff.la
2004-08-07 14:20:35 -04:00
# Environment parameters to be used during tests
TESTS_ENVIRONMENT = \
MAKE="$(MAKE)" \
MAKEFLAGS="$(MAKEFLAGS)" \
MEMCHECK="$(MEMCHECK)"
EXTRA_DIST = \
$(REFFILES) \
$(TESTSCRIPTS) \
$(IMAGES_EXTRA_DIST) \
CMakeLists.txt \
common.sh \
TiffSplitTest.cmake \
TiffTestCommon.cmake \
TiffTest.cmake
2004-08-07 14:20:35 -04:00
# All of the tests to execute via 'make check'
TESTS = $(check_PROGRAMS) $(TESTSCRIPTS)
2004-08-07 14:20:35 -04:00
2009-08-21 21:45:32 -04:00
# Tests which are expected to fail
XFAIL_TESTS =
2009-08-21 21:45:32 -04:00
# Extra files which should be cleaned by 'make clean'
CLEANFILES = test_packbits.tif o-*
if HAVE_JPEG
JPEG_DEPENDENT_CHECK_PROG=raw_decode
JPEG_DEPENDENT_TESTSCRIPTS=\
tiff2rgba-quad-tile.jpg.sh
else
JPEG_DEPENDENT_CHECK_PROG=
JPEG_DEPENDENT_TESTSCRIPTS=
endif
# Executable programs which need to be built in order to support tests
check_PROGRAMS = \
ascii_tag long_tag short_tag strip_rw rewrite custom_dir \
defer_strile_loading defer_strile_writing testtypes \
$(JPEG_DEPENDENT_CHECK_PROG)
2004-09-03 11:03:34 -04:00
# Test scripts to execute
TESTSCRIPTS = \
ppm2tiff_pbm.sh \
ppm2tiff_pgm.sh \
ppm2tiff_ppm.sh \
2019-03-22 05:00:52 -04:00
fax2tiff.sh \
tiffcp-g3.sh \
tiffcp-g3-1d.sh \
tiffcp-g3-1d-fill.sh \
tiffcp-g3-2d.sh \
tiffcp-g3-2d-fill.sh \
tiffcp-g4.sh \
tiffcp-logluv.sh \
tiffcp-thumbnail.sh \
tiffcp-lzw-compat.sh \
tiffcp-lzw-scanline-decode.sh \
tiffdump.sh \
tiffinfo.sh \
tiffcp-split.sh \
tiffcp-split-join.sh \
tiff2ps-PS1.sh \
tiff2ps-PS2.sh \
tiff2ps-PS3.sh \
tiff2ps-EPS1.sh \
tiff2pdf.sh \
tiffcrop-doubleflip-logluv-3c-16b.sh \
tiffcrop-doubleflip-minisblack-1c-16b.sh \
tiffcrop-doubleflip-minisblack-1c-8b.sh \
tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh \
tiffcrop-doubleflip-miniswhite-1c-1b.sh \
tiffcrop-doubleflip-palette-1c-1b.sh \
tiffcrop-doubleflip-palette-1c-4b.sh \
tiffcrop-doubleflip-palette-1c-8b.sh \
tiffcrop-doubleflip-rgb-3c-16b.sh \
tiffcrop-doubleflip-rgb-3c-8b.sh \
tiffcrop-extract-logluv-3c-16b.sh \
tiffcrop-extract-minisblack-1c-16b.sh \
tiffcrop-extract-minisblack-1c-8b.sh \
tiffcrop-extract-minisblack-2c-8b-alpha.sh \
tiffcrop-extract-miniswhite-1c-1b.sh \
tiffcrop-extract-palette-1c-1b.sh \
tiffcrop-extract-palette-1c-4b.sh \
tiffcrop-extract-palette-1c-8b.sh \
tiffcrop-extract-rgb-3c-16b.sh \
tiffcrop-extract-rgb-3c-8b.sh \
tiffcrop-extractz14-logluv-3c-16b.sh \
tiffcrop-extractz14-minisblack-1c-16b.sh \
tiffcrop-extractz14-minisblack-1c-8b.sh \
tiffcrop-extractz14-minisblack-2c-8b-alpha.sh \
tiffcrop-extractz14-miniswhite-1c-1b.sh \
tiffcrop-extractz14-palette-1c-1b.sh \
tiffcrop-extractz14-palette-1c-4b.sh \
tiffcrop-extractz14-palette-1c-8b.sh \
tiffcrop-extractz14-rgb-3c-16b.sh \
tiffcrop-extractz14-rgb-3c-8b.sh \
tiffcrop-R90-logluv-3c-16b.sh \
tiffcrop-R90-minisblack-1c-16b.sh \
tiffcrop-R90-minisblack-1c-8b.sh \
tiffcrop-R90-minisblack-2c-8b-alpha.sh \
tiffcrop-R90-miniswhite-1c-1b.sh \
tiffcrop-R90-palette-1c-1b.sh \
tiffcrop-R90-palette-1c-4b.sh \
tiffcrop-R90-palette-1c-8b.sh \
tiffcrop-R90-rgb-3c-16b.sh \
tiffcrop-R90-rgb-3c-8b.sh \
tiff2bw-palette-1c-8b.sh \
tiff2bw-quad-lzw-compat.sh \
tiff2bw-rgb-3c-8b.sh \
tiff2rgba-logluv-3c-16b.sh \
tiff2rgba-minisblack-1c-16b.sh \
tiff2rgba-minisblack-1c-8b.sh \
tiff2rgba-minisblack-2c-8b-alpha.sh \
tiff2rgba-miniswhite-1c-1b.sh \
tiff2rgba-palette-1c-1b.sh \
tiff2rgba-palette-1c-4b.sh \
tiff2rgba-palette-1c-8b.sh \
tiff2rgba-rgb-3c-16b.sh \
2012-06-01 17:04:22 -04:00
tiff2rgba-rgb-3c-8b.sh \
$(JPEG_DEPENDENT_TESTSCRIPTS)
# This list should contain the references files
# from the 'refs' subdirectory
REFFILES = \
refs/o-tiff2ps-EPS1.ps \
refs/o-tiff2ps-PS1.ps \
refs/o-tiff2ps-PS2.ps \
refs/o-tiff2ps-PS3.ps
# This list should contain all of the TIFF files in the 'images'
# subdirectory which are intended to be used as input images for
# tests. All of these files should use the extension ".tiff".
TIFFIMAGES = \
images/logluv-3c-16b.tiff \
images/minisblack-1c-16b.tiff \
images/minisblack-1c-8b.tiff \
images/minisblack-2c-8b-alpha.tiff \
images/miniswhite-1c-1b.tiff \
images/palette-1c-1b.tiff \
images/palette-1c-4b.tiff \
images/palette-1c-8b.tiff \
images/rgb-3c-16b.tiff \
2012-06-01 17:04:22 -04:00
images/rgb-3c-8b.tiff \
images/quad-tile.jpg.tiff \
images/quad-lzw-compat.tiff \
images/lzw-single-strip.tiff
PNMIMAGES = \
images/minisblack-1c-8b.pgm \
images/miniswhite-1c-1b.pbm \
images/rgb-3c-8b.ppm
# This list should include all of the files in the 'images'
# subdirectory which are intended to be distributed. This may include
# files which are not currently used by the tests.
IMAGES_EXTRA_DIST = \
images/README.txt \
2019-03-22 05:00:52 -04:00
images/miniswhite-1c-1b.g3 \
$(PNMIMAGES) \
$(TIFFIMAGES)
2008-04-15 10:19:08 -04:00
noinst_HEADERS = tifftest.h
2004-09-03 11:03:34 -04:00
ascii_tag_SOURCES = ascii_tag.c
ascii_tag_LDADD = $(LIBTIFF)
2004-10-01 10:16:37 -04:00
long_tag_SOURCES = long_tag.c check_tag.c
2004-09-10 09:46:21 -04:00
long_tag_LDADD = $(LIBTIFF)
2004-10-01 10:16:37 -04:00
short_tag_SOURCES = short_tag.c check_tag.c
2004-09-13 06:33:57 -04:00
short_tag_LDADD = $(LIBTIFF)
2004-10-09 14:36:47 -04:00
strip_rw_SOURCES = strip_rw.c strip.c test_arrays.c test_arrays.h
2004-09-14 11:01:16 -04:00
strip_rw_LDADD = $(LIBTIFF)
2008-01-01 08:57:21 -05:00
rewrite_SOURCES = rewrite_tag.c
rewrite_LDADD = $(LIBTIFF)
2012-06-01 17:04:22 -04:00
raw_decode_SOURCES = raw_decode.c
raw_decode_LDADD = $(LIBTIFF)
custom_dir_SOURCES = custom_dir.c
custom_dir_LDADD = $(LIBTIFF)
Make defer strile offset/bytecount loading available at runtime ... and add per-strile offset/bytecount loading capabilities. Part of this commit makes the behaviour that was previously met when libtiff was compiled with -DDEFER_STRILE_LOAD available for default builds when specifying the new 'D' (Deferred) TIFFOpen() flag. In that mode, the [Tile/Strip][ByteCounts/Offsets] arrays are only loaded when first accessed. This can speed-up the opening of files stored on the network when just metadata retrieval is needed. This mode has been used for years by the GDAL library when compiled with its embeded libtiff copy. To avoid potential out-of-tree code (typically codecs) that would use the td_stripbytecount and td_stripoffset array inconditionnaly assuming they have been loaded, those have been suffixed with _p (for protected). The use of the new functions mentionned below is then recommended. Another addition of this commit is the capability of loading only the values of the offset/bytecount of the strile of interest instead of the whole array. This is enabled with the new 'O' (Ondemand) flag of TIFFOpen() (which implies 'D'). That behaviour has also been used by GDAL, which hacked into the td_stripoffset/td_stripbytecount arrays directly. The new code added in the _TIFFFetchStrileValue() and _TIFFPartialReadStripArray() internal functions is mostly a port of what was in GDAL GTiff driver previously. Related to that, the public TIFFGetStrileOffset[WithErr]() and TIFFGetStrileByteCount[WithErr]() functions have been added to API. They are of particular interest when using sparse files (with offset == bytecount == 0) and you want to detect if a strile is present or not without decompressing the data, or updating an existing sparse file. They will also be used to enable a future enhancement where client code can entirely skip bytecount loading in some situtations A new test/defer_strile_loading.c test has been added to test the above capabilities.
2019-05-10 08:46:45 -04:00
defer_strile_loading_SOURCES = defer_strile_loading.c
defer_strile_loading_LDADD = $(LIBTIFF)
defer_strile_writing_SOURCES = defer_strile_writing.c
defer_strile_writing_LDADD = $(LIBTIFF)
2004-08-07 14:20:35 -04:00
AM_CPPFLAGS = -I$(top_srcdir)/libtiff
2004-08-07 14:20:35 -04:00
# memcheck: valgrind's memory access checker.
#
# The suppressions which come with valgrind are sometimes insufficient
# to handle certain system library aspects which may be reported and
# which are unrelated to libtiff. When first starting with a new
# system (or after a major system update), it is good to execute the
# test suite (known to already be passing!) like 'make memcheck
# VALGRIND_EXTRA_OPTS=--gen-suppressions=all' to create valgrind
# suppression entries in the test log. Make sure that none of the
# suppressions are due to libtiff itself. Tell valgrind about the
# suppressions by creating a .valgrindrc file with content like:
# --memcheck:suppressions=mysupp.supp
memcheck:
$(MAKE) MEMCHECK='valgrind --tool=memcheck --leak-check=full --read-var-info=yes \
--error-exitcode=2 --track-origins=yes --num-callers=12 \
--quiet $(VALGRIND_EXTRA_OPTS)' check
# ptrcheck: valgrind's experimental pointer checking tool.
ptrcheck:
$(MAKE) MEMCHECK='valgrind --tool=exp-ptrcheck --quiet $(VALGRIND_EXTRA_OPTS)' check
# tiff2bw is pretty lame so currently only the generated scripts
# tiff2bw-palette-1c-8b.sh, tiff2bw-quad-lzw-compat.sh, and
# tiff2bw-rgb-3c-8b.sh pass tests.
generate-tiff2bw-tests:
for file in $(TIFFIMAGES) ; \
do \
base=`basename $$file .tiff` ; \
testscript=$(srcdir)/tiff2bw-$$base.sh ; \
( \
echo "#!/bin/sh" ; \
echo "# Generated file, master is Makefile.am" ; \
echo ". \$${srcdir:-.}/common.sh" ; \
echo "infile=\"\$$srcdir/$$file\"" ; \
echo "outfile=\"o-tiff2bw-$$base.tiff\"" ; \
echo "f_test_convert \"\$$TIFF2BW\" \$$infile \$$outfile" ; \
echo "f_tiffinfo_validate \$$outfile" ; \
) > $$testscript ; \
chmod +x $$testscript ; \
done
generate-tiff2rgba-tests:
for file in $(TIFFIMAGES) ; \
do \
base=`basename $$file .tiff` ; \
testscript=$(srcdir)/tiff2rgba-$$base.sh ; \
( \
echo "#!/bin/sh" ; \
2009-08-23 22:55:05 -04:00
echo "# Generated file, master is Makefile.am" ; \
echo ". \$${srcdir:-.}/common.sh" ; \
2009-08-23 22:55:05 -04:00
echo "infile=\"\$$srcdir/$$file\"" ; \
echo "outfile=\"o-tiff2rgba-$$base.tiff\"" ; \
echo "f_test_convert \"\$$TIFF2RGBA\" \$$infile \$$outfile" ; \
echo "f_tiffinfo_validate \$$outfile" ; \
) > $$testscript ; \
chmod +x $$testscript ; \
done
# Test rotations
generate-tiffcrop-R90-tests:
for file in $(TIFFIMAGES) ; \
do \
base=`basename $$file .tiff` ; \
testscript=$(srcdir)/tiffcrop-R90-$$base.sh ; \
( \
echo "#!/bin/sh" ; \
2009-08-23 22:55:05 -04:00
echo "# Generated file, master is Makefile.am" ; \
echo ". \$${srcdir:-.}/common.sh" ; \
echo "infile=\"\$$srcdir/$$file\"" ; \
echo "outfile=\"o-tiffcrop-R90-$$base.tiff\"" ; \
echo "f_test_convert \"\$$TIFFCROP -R90\" \$$infile \$$outfile" ; \
echo "f_tiffinfo_validate \$$outfile" ; \
) > $$testscript ; \
chmod +x $$testscript ; \
done
# Test flip (mirror)
generate-tiffcrop-doubleflip-tests:
for file in $(TIFFIMAGES) ; \
do \
base=`basename $$file .tiff` ; \
testscript=$(srcdir)/tiffcrop-doubleflip-$$base.sh ; \
( \
echo "#!/bin/sh" ; \
2009-08-23 22:55:05 -04:00
echo "# Generated file, master is Makefile.am" ; \
echo ". \$${srcdir:-.}/common.sh" ; \
echo "infile=\"\$$srcdir/$$file\"" ; \
echo "outfile=\"o-tiffcrop-doubleflip-$$base.tiff\"" ; \
echo "f_test_convert \"\$$TIFFCROP -F both\" \$$infile \$$outfile" ; \
echo "f_tiffinfo_validate \$$outfile" ; \
) > $$testscript ; \
chmod +x $$testscript ; \
done
# Test extracting a section 100 pixels wide and 100 pixels high
generate-tiffcrop-extract-tests:
for file in $(TIFFIMAGES) ; \
do \
base=`basename $$file .tiff` ; \
testscript=$(srcdir)/tiffcrop-extract-$$base.sh ; \
( \
echo "#!/bin/sh" ; \
2009-08-23 22:55:05 -04:00
echo "# Generated file, master is Makefile.am" ; \
echo ". \$${srcdir:-.}/common.sh" ; \
echo "infile=\"\$$srcdir/$$file\"" ; \
echo "outfile=\"o-tiffcrop-extract-$$base.tiff\"" ; \
echo "f_test_convert \"\$$TIFFCROP -U px -E top -X 60 -Y 60\" \$$infile \$$outfile" ; \
echo "f_tiffinfo_validate \$$outfile" ; \
) > $$testscript ; \
chmod +x $$testscript ; \
done
# Test extracting the first and fourth quarters from the left side.
generate-tiffcrop-extractz14-tests:
for file in $(TIFFIMAGES) ; \
do \
base=`basename $$file .tiff` ; \
testscript=$(srcdir)/tiffcrop-extractz14-$$base.sh ; \
( \
echo "#!/bin/sh" ; \
2009-08-23 22:55:05 -04:00
echo "# Generated file, master is Makefile.am" ; \
echo ". \$${srcdir:-.}/common.sh" ; \
echo "infile=\"\$$srcdir/$$file\"" ; \
echo "outfile=\"o-tiffcrop-extractz14-$$base.tiff\"" ; \
echo "f_test_convert \"\$$TIFFCROP -E left -Z1:4,2:4\" \$$infile \$$outfile" ; \
echo "f_tiffinfo_validate \$$outfile" ; \
) > $$testscript ; \
chmod +x $$testscript ; \
done
generate-tiffcrop-tests: \
generate-tiffcrop-R90-tests \
generate-tiffcrop-doubleflip-tests \
generate-tiffcrop-extract-tests \
generate-tiffcrop-extractz14-tests
generate-tests: \
generate-tiff2bw-tests \
generate-tiff2rgba-tests \
generate-tiffcrop-tests