libtiff/tools/tiff2ps.c

2081 lines
56 KiB
C
Raw Normal View History

2004-09-09 14:06:14 -04:00
/* $Id: tiff2ps.c,v 1.27 2004-09-09 18:06:14 fwarmerdam Exp $ */
1999-07-27 17:50:26 -04:00
/*
* Copyright (c) 1988-1997 Sam Leffler
* Copyright (c) 1991-1997 Silicon Graphics, Inc.
*
* Permission to use, copy, modify, distribute, and sell this software and
* its documentation for any purpose is hereby granted without fee, provided
* that (i) the above copyright notices and this permission notice appear in
* all copies of the software and related documentation, and (ii) the names of
* Sam Leffler and Silicon Graphics may not be used in any advertising or
* publicity relating to the software without the specific, prior written
* permission of Sam Leffler and Silicon Graphics.
*
* THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
* EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
* WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
*
* IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
* ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
* OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
* WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
* LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#include "tif_config.h"
1999-07-27 17:50:26 -04:00
#include <stdio.h>
#include <stdlib.h> /* for atof */
#include <math.h>
#include <time.h>
#include <string.h>
1999-07-27 17:50:26 -04:00
2004-09-09 14:06:14 -04:00
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
1999-07-27 17:50:26 -04:00
#include "tiffio.h"
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
/*
* Revision history
*
* 2001-Mar-21
* I (Bruce A. Mallett) added this revision history comment ;)
*
* Fixed PS_Lvl2page() code which outputs non-ASCII85 raw
* data. Moved test for when to output a line break to
* *after* the output of a character. This just serves
* to fix an eye-nuisance where the first line of raw
* data was one character shorter than subsequent lines.
*
* Added an experimental ASCII85 encoder which can be used
* only when there is a single buffer of bytes to be encoded.
* This version is much faster at encoding a straight-line
* buffer of data because it can avoid alot of the loop
* overhead of the byte-by-bye version. To use this version
* you need to define EXP_ASCII85ENCODER (experimental ...).
*
* Added bug fix given by Michael Schmidt to PS_Lvl2page()
* in which an end-of-data marker ('>') was not being output
* when producing non-ASCII85 encoded PostScript Level 2
* data.
*
* Fixed PS_Lvl2colorspace() so that it no longer assumes that
* a TIFF having more than 2 planes is a CMYK. This routine
* no longer looks at the samples per pixel but instead looks
* at the "photometric" value. This change allows support of
* CMYK TIFFs.
*
* Modified the PostScript L2 imaging loop so as to test if
* the input stream is still open before attempting to do a
* flushfile on it. This was done because some RIPs close
* the stream after doing the image operation.
*
* Got rid of the realloc() being done inside a loop in the
* PSRawDataBW() routine. The code now walks through the
* byte-size array outside the loop to determine the largest
* size memory block that will be needed.
*
* Added "-m" switch to ask tiff2ps to, where possible, use the
* "imagemask" operator instead of the "image" operator.
*
* Added the "-i #" switch to allow interpolation to be disabled.
*
* Unrolled a loop or two to improve performance.
*/
/*
* Define EXP_ASCII85ENCODER if you want to use an experimental
* version of the ASCII85 encoding routine. The advantage of
* using this routine is that tiff2ps will convert to ASCII85
* encoding at between 3 and 4 times the speed as compared to
* using the old (non-experimental) encoder. The disadvantage
* is that you will be using a new (and unproven) encoding
* routine. So user beware, you have been warned!
*/
#define EXP_ASCII85ENCODER
1999-07-27 17:50:26 -04:00
/*
* NB: this code assumes uint32 works with printf's %l[ud].
*/
#ifndef TRUE
#define TRUE 1
#define FALSE 0
#endif
int ascii85 = FALSE; /* use ASCII85 encoding */
1999-07-27 17:50:26 -04:00
int interpolate = TRUE; /* interpolate level2 image */
int level2 = FALSE; /* generate PostScript level 2 */
int level3 = FALSE; /* generate PostScript level 3 */
1999-07-27 17:50:26 -04:00
int printAll = FALSE; /* print all images in file */
int generateEPSF = TRUE; /* generate Encapsulated PostScript */
int PSduplex = FALSE; /* enable duplex printing */
1999-07-27 17:50:26 -04:00
int PStumble = FALSE; /* enable top edge binding */
int PSavoiddeadzone = TRUE; /* enable avoiding printer deadzone */
2004-06-04 10:16:14 -04:00
double maxPageHeight = 0; /* maximum size to fit on page */
double splitOverlap = 0; /* amount for split pages to overlag */
int rotate = FALSE; /* rotate image by 180 degrees */
1999-07-27 17:50:26 -04:00
char *filename; /* input filename */
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
int useImagemask = FALSE; /* Use imagemask instead of image operator */
uint16 res_unit = 0; /* Resolution units: 1 - inches, 2 - cm*/
1999-07-27 17:50:26 -04:00
/*
* ASCII85 Encoding Support.
*/
unsigned char ascii85buf[10];
int ascii85count;
int ascii85breaklen;
2004-06-04 10:16:14 -04:00
int TIFF2PS(FILE*, TIFF*, double, double, double, double, int);
1999-07-27 17:50:26 -04:00
void PSpage(FILE*, TIFF*, uint32, uint32);
void PSColorContigPreamble(FILE*, uint32, uint32, int);
void PSColorSeparatePreamble(FILE*, uint32, uint32, int);
void PSDataColorContig(FILE*, TIFF*, uint32, uint32, int);
void PSDataColorSeparate(FILE*, TIFF*, uint32, uint32, int);
void PSDataPalette(FILE*, TIFF*, uint32, uint32);
void PSDataBW(FILE*, TIFF*, uint32, uint32);
void PSRawDataBW(FILE*, TIFF*, uint32, uint32);
void Ascii85Init(void);
void Ascii85Put(unsigned char code, FILE* fd);
void Ascii85Flush(FILE* fd);
2004-06-04 10:16:14 -04:00
void PSHead(FILE*, TIFF*, uint32, uint32, double, double, double, double);
void PSTail(FILE*, int);
1999-07-27 17:50:26 -04:00
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER)
int Ascii85EncodeBlock( uint8 * ascii85_p, unsigned f_eod, const uint8 * raw_p, int raw_l );
#endif
1999-07-27 17:50:26 -04:00
static void usage(int);
int
main(int argc, char* argv[])
{
2004-06-05 04:13:06 -04:00
int dirnum = -1, c, np = 0;
int centered = 0;
2004-06-04 10:16:14 -04:00
double bottommargin = 0;
double leftmargin = 0;
double pageWidth = 0;
double pageHeight = 0;
1999-07-27 17:50:26 -04:00
uint32 diroff = 0;
extern char *optarg;
extern int optind;
FILE* output = stdout;
while ((c = getopt(argc, argv, "b:d:h:H:L:i:w:l:o:O:acelmrxyzps1238DT")) != -1)
1999-07-27 17:50:26 -04:00
switch (c) {
case 'b':
bottommargin = atof(optarg);
break;
case 'c':
centered = 1;
break;
1999-07-27 17:50:26 -04:00
case 'd':
dirnum = atoi(optarg);
break;
case 'D':
1999-07-27 17:50:26 -04:00
PSduplex = TRUE;
break;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
case 'i':
interpolate = atoi(optarg) ? TRUE:FALSE;
break;
1999-07-27 17:50:26 -04:00
case 'T':
PStumble = TRUE;
break;
case 'e':
PSavoiddeadzone = FALSE;
1999-07-27 17:50:26 -04:00
generateEPSF = TRUE;
break;
case 'h':
pageHeight = atof(optarg);
break;
case 'H':
maxPageHeight = atof(optarg);
if (pageHeight==0) pageHeight = maxPageHeight;
break;
case 'L':
splitOverlap = atof(optarg);
break;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
case 'm':
useImagemask = TRUE;
break;
1999-07-27 17:50:26 -04:00
case 'o':
diroff = (uint32) strtoul(optarg, NULL, 0);
break;
case 'O': /* XXX too bad -o is already taken */
output = fopen(optarg, "w");
if (output == NULL) {
fprintf(stderr,
"%s: %s: Cannot open output file.\n",
argv[0], optarg);
exit(-2);
}
break;
case 'l':
leftmargin = atof(optarg);
break;
1999-07-27 17:50:26 -04:00
case 'a':
printAll = TRUE;
/* fall thru... */
case 'p':
generateEPSF = FALSE;
break;
case 'r':
rotate = TRUE;
break;
1999-07-27 17:50:26 -04:00
case 's':
printAll = FALSE;
break;
case 'w':
pageWidth = atof(optarg);
break;
case 'z':
PSavoiddeadzone = FALSE;
break;
case '1':
level2 = FALSE;
level3 = FALSE;
1999-07-27 17:50:26 -04:00
ascii85 = FALSE;
break;
case '2':
level2 = TRUE;
ascii85 = TRUE; /* default to yes */
break;
case '3':
level3 = TRUE;
ascii85 = TRUE; /* default to yes */
break;
1999-07-27 17:50:26 -04:00
case '8':
ascii85 = FALSE;
break;
case 'x':
res_unit = RESUNIT_CENTIMETER;
break;
case 'y':
res_unit = RESUNIT_INCH;
break;
1999-07-27 17:50:26 -04:00
case '?':
usage(-1);
}
for (; argc - optind > 0; optind++) {
TIFF* tif = TIFFOpen(filename = argv[optind], "r");
if (tif != NULL) {
2004-06-05 04:13:06 -04:00
if (dirnum != -1
&& !TIFFSetDirectory(tif, (tdir_t)dirnum))
1999-07-27 17:50:26 -04:00
return (-1);
else if (diroff != 0 &&
!TIFFSetSubDirectory(tif, diroff))
return (-1);
np = TIFF2PS(output, tif, pageWidth, pageHeight,
leftmargin, bottommargin, centered);
1999-07-27 17:50:26 -04:00
TIFFClose(tif);
}
}
if (np)
PSTail(output, np);
1999-07-27 17:50:26 -04:00
else
usage(-1);
1999-07-27 17:50:26 -04:00
if (output != stdout)
fclose(output);
return (0);
}
static uint16 samplesperpixel;
static uint16 bitspersample;
static uint16 planarconfiguration;
static uint16 photometric;
static uint16 compression;
static uint16 extrasamples;
static int alpha;
static int
checkImage(TIFF* tif)
{
switch (photometric) {
case PHOTOMETRIC_YCBCR:
if ((compression == COMPRESSION_JPEG || compression == COMPRESSION_OJPEG)
&& planarconfiguration == PLANARCONFIG_CONTIG) {
1999-07-27 17:50:26 -04:00
/* can rely on libjpeg to convert to RGB */
TIFFSetField(tif, TIFFTAG_JPEGCOLORMODE,
JPEGCOLORMODE_RGB);
photometric = PHOTOMETRIC_RGB;
} else {
if (level2 || level3)
1999-07-27 17:50:26 -04:00
break;
TIFFError(filename, "Can not handle image with %s",
"PhotometricInterpretation=YCbCr");
return (0);
}
/* fall thru... */
case PHOTOMETRIC_RGB:
if (alpha && bitspersample != 8) {
TIFFError(filename,
"Can not handle %d-bit/sample RGB image with alpha",
bitspersample);
return (0);
}
/* fall thru... */
case PHOTOMETRIC_SEPARATED:
case PHOTOMETRIC_PALETTE:
case PHOTOMETRIC_MINISBLACK:
case PHOTOMETRIC_MINISWHITE:
break;
case PHOTOMETRIC_LOGL:
case PHOTOMETRIC_LOGLUV:
if (compression != COMPRESSION_SGILOG &&
compression != COMPRESSION_SGILOG24) {
TIFFError(filename,
"Can not handle %s data with compression other than SGILog",
(photometric == PHOTOMETRIC_LOGL) ?
"LogL" : "LogLuv"
);
return (0);
}
/* rely on library to convert to RGB/greyscale */
TIFFSetField(tif, TIFFTAG_SGILOGDATAFMT, SGILOGDATAFMT_8BIT);
photometric = (photometric == PHOTOMETRIC_LOGL) ?
PHOTOMETRIC_MINISBLACK : PHOTOMETRIC_RGB;
bitspersample = 8;
break;
case PHOTOMETRIC_CIELAB:
/* fall thru... */
default:
TIFFError(filename,
"Can not handle image with PhotometricInterpretation=%d",
photometric);
return (0);
}
switch (bitspersample) {
case 1: case 2:
case 4: case 8:
break;
default:
TIFFError(filename, "Can not handle %d-bit/sample image",
bitspersample);
return (0);
}
if (planarconfiguration == PLANARCONFIG_SEPARATE && extrasamples > 0)
TIFFWarning(filename, "Ignoring extra samples");
return (1);
}
#define PS_UNIT_SIZE 72.0
#define PSUNITS(npix,res) ((npix) * (PS_UNIT_SIZE / (res)))
static char RGBcolorimage[] = "\
/bwproc {\n\
rgbproc\n\
dup length 3 idiv string 0 3 0\n\
5 -1 roll {\n\
add 2 1 roll 1 sub dup 0 eq {\n\
pop 3 idiv\n\
3 -1 roll\n\
dup 4 -1 roll\n\
dup 3 1 roll\n\
5 -1 roll put\n\
1 add 3 0\n\
} { 2 1 roll } ifelse\n\
} forall\n\
pop pop pop\n\
} def\n\
/colorimage where {pop} {\n\
/colorimage {pop pop /rgbproc exch def {bwproc} image} bind def\n\
} ifelse\n\
";
/*
* Adobe Photoshop requires a comment line of the form:
*
* %ImageData: <cols> <rows> <depth> <main channels> <pad channels>
* <block size> <1 for binary|2 for hex> "data start"
*
* It is claimed to be part of some future revision of the EPS spec.
*/
static void
PhotoshopBanner(FILE* fd, uint32 w, uint32 h, int bs, int nc, char* startline)
{
fprintf(fd, "%%ImageData: %ld %ld %d %d 0 %d 2 \"",
(long) w, (long) h, bitspersample, nc, bs);
fprintf(fd, startline, nc);
fprintf(fd, "\"\n");
}
/*
* pw : image width in pixels
* ph : image height in pixels
* pprw : image width in PS units (72 dpi)
* pprh : image height in PS units (72 dpi)
*/
1999-07-27 17:50:26 -04:00
static void
2004-06-04 10:16:14 -04:00
setupPageState(TIFF* tif, uint32* pw, uint32* ph, double* pprw, double* pprh)
1999-07-27 17:50:26 -04:00
{
double xres = 0.0, yres = 0.0;
1999-07-27 17:50:26 -04:00
TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, pw);
TIFFGetField(tif, TIFFTAG_IMAGELENGTH, ph);
if (res_unit == 0)
TIFFGetFieldDefaulted(tif, TIFFTAG_RESOLUTIONUNIT, &res_unit);
1999-07-27 17:50:26 -04:00
/*
* Calculate printable area.
*/
if (!TIFFGetField(tif, TIFFTAG_XRESOLUTION, &xres)
|| fabs(xres) < 0.0000001)
1999-07-27 17:50:26 -04:00
xres = PS_UNIT_SIZE;
if (!TIFFGetField(tif, TIFFTAG_YRESOLUTION, &yres)
|| fabs(yres) < 0.0000001)
1999-07-27 17:50:26 -04:00
yres = PS_UNIT_SIZE;
switch (res_unit) {
case RESUNIT_CENTIMETER:
xres *= 2.54, yres *= 2.54;
break;
2002-06-02 07:41:23 -04:00
case RESUNIT_INCH:
break;
1999-07-27 17:50:26 -04:00
case RESUNIT_NONE:
default:
1999-07-27 17:50:26 -04:00
xres *= PS_UNIT_SIZE, yres *= PS_UNIT_SIZE;
break;
}
*pprh = PSUNITS(*ph, yres);
*pprw = PSUNITS(*pw, xres);
}
static int
isCCITTCompression(TIFF* tif)
{
uint16 compress;
TIFFGetField(tif, TIFFTAG_COMPRESSION, &compress);
return (compress == COMPRESSION_CCITTFAX3 ||
compress == COMPRESSION_CCITTFAX4 ||
compress == COMPRESSION_CCITTRLE ||
compress == COMPRESSION_CCITTRLEW);
}
static tsize_t tf_bytesperrow;
static tsize_t ps_bytesperrow;
static tsize_t tf_rowsperstrip;
1999-07-27 17:50:26 -04:00
static tsize_t tf_numberstrips;
static char *hex = "0123456789abcdef";
/*
* imagewidth & imageheight are 1/72 inches
* pagewidth & pageheight are inches
*/
int
2004-06-04 10:16:14 -04:00
PlaceImage(FILE *fp, double pagewidth, double pageheight,
double imagewidth, double imageheight, int splitpage,
double lm, double bm, int cnt)
{
2004-06-04 10:16:14 -04:00
double xtran = 0;
double ytran = 0;
double xscale = 1;
double yscale = 1;
double left_offset = lm * PS_UNIT_SIZE;
double bottom_offset = bm * PS_UNIT_SIZE;
double subimageheight;
double splitheight;
double overlap;
pagewidth *= PS_UNIT_SIZE;
pageheight *= PS_UNIT_SIZE;
if (maxPageHeight==0)
splitheight = 0;
else
splitheight = maxPageHeight * PS_UNIT_SIZE;
overlap = splitOverlap * PS_UNIT_SIZE;
/*
* WIDTH:
* if too wide, scrunch to fit
* else leave it alone
*/
if (imagewidth <= pagewidth) {
xscale = imagewidth;
} else {
xscale = pagewidth;
}
/* HEIGHT:
* if too long, scrunch to fit
* if too short, move to top of page
*/
if (imageheight <= pageheight) {
yscale = imageheight;
ytran = pageheight - imageheight;
} else if (imageheight > pageheight &&
(splitheight == 0 || imageheight <= splitheight)) {
yscale = pageheight;
} else /* imageheight > splitheight */ {
subimageheight = imageheight - (pageheight-overlap)*splitpage;
if (subimageheight <= pageheight) {
yscale = imageheight;
ytran = pageheight - subimageheight;
splitpage = 0;
} else if ( subimageheight > pageheight && subimageheight <= splitheight) {
yscale = imageheight * pageheight / subimageheight;
ytran = 0;
splitpage = 0;
} else /* sumimageheight > splitheight */ {
yscale = imageheight;
ytran = pageheight - subimageheight;
splitpage++;
}
}
bottom_offset += ytran / (cnt?2:1);
if (cnt)
left_offset += xtran / 2;
fprintf(fp, "%f %f translate\n", left_offset, bottom_offset);
fprintf(fp, "%f %f scale\n", xscale, yscale);
if (rotate)
fputs ("1 1 translate 180 rotate\n", fp);
return splitpage;
}
1999-07-27 17:50:26 -04:00
/* returns the sequence number of the page processed */
int
2004-06-04 10:16:14 -04:00
TIFF2PS(FILE* fd, TIFF* tif,
double pw, double ph, double lm, double bm, int cnt)
1999-07-27 17:50:26 -04:00
{
uint32 w, h;
2004-06-04 10:16:14 -04:00
double ox, oy, prw, prh;
double scale = 1.0;
double left_offset = lm * PS_UNIT_SIZE;
double bottom_offset = bm * PS_UNIT_SIZE;
1999-07-27 17:50:26 -04:00
uint32 subfiletype;
uint16* sampleinfo;
static int npages = 0;
int split;
1999-07-27 17:50:26 -04:00
if (!TIFFGetField(tif, TIFFTAG_XPOSITION, &ox))
ox = 0;
if (!TIFFGetField(tif, TIFFTAG_YPOSITION, &oy))
oy = 0;
setupPageState(tif, &w, &h, &prw, &prh);
do {
tf_numberstrips = TIFFNumberOfStrips(tif);
1999-07-27 17:50:26 -04:00
TIFFGetFieldDefaulted(tif, TIFFTAG_ROWSPERSTRIP,
&tf_rowsperstrip);
setupPageState(tif, &w, &h, &prw, &prh);
if (!npages)
PSHead(fd, tif, w, h, prw, prh, ox, oy);
1999-07-27 17:50:26 -04:00
TIFFGetFieldDefaulted(tif, TIFFTAG_BITSPERSAMPLE,
&bitspersample);
TIFFGetFieldDefaulted(tif, TIFFTAG_SAMPLESPERPIXEL,
&samplesperpixel);
TIFFGetFieldDefaulted(tif, TIFFTAG_PLANARCONFIG,
&planarconfiguration);
TIFFGetField(tif, TIFFTAG_COMPRESSION, &compression);
TIFFGetFieldDefaulted(tif, TIFFTAG_EXTRASAMPLES,
&extrasamples, &sampleinfo);
alpha = (extrasamples == 1 &&
sampleinfo[0] == EXTRASAMPLE_ASSOCALPHA);
if (!TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &photometric)) {
switch (samplesperpixel - extrasamples) {
case 1:
if (isCCITTCompression(tif))
photometric = PHOTOMETRIC_MINISWHITE;
else
photometric = PHOTOMETRIC_MINISBLACK;
break;
case 3:
photometric = PHOTOMETRIC_RGB;
break;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
case 4:
photometric = PHOTOMETRIC_SEPARATED;
break;
1999-07-27 17:50:26 -04:00
}
}
if (checkImage(tif)) {
tf_bytesperrow = TIFFScanlineSize(tif);
npages++;
fprintf(fd, "%%%%Page: %d %d\n", npages, npages);
if (!generateEPSF && ( level2 || level3 )) {
2004-06-04 10:16:14 -04:00
double psw,psh;
if (pw!=0 && ph!=0) {
psw=pw;
psh=ph;
}
else {
psw=rotate ? prh:prw;
psh=rotate ? prw:prh;
}
fprintf(fd,
"1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n",
psw, psh);
2003-08-12 03:51:03 -04:00
fputs(
"<<\n /Policies <<\n /PageSize 3\n >>\n>> setpagedevice\n",
fd);
}
1999-07-27 17:50:26 -04:00
fprintf(fd, "gsave\n");
fprintf(fd, "100 dict begin\n");
if (pw != 0 && ph != 0) {
if (maxPageHeight) { /* used -H option */
split = PlaceImage(fd,pw,ph,prw,prh,0,lm,bm,cnt);
while( split ) {
PSpage(fd, tif, w, h);
fprintf(fd, "end\n");
fprintf(fd, "grestore\n");
fprintf(fd, "showpage\n");
npages++;
fprintf(fd, "%%%%Page: %d %d\n", npages, npages);
fprintf(fd, "gsave\n");
fprintf(fd, "100 dict begin\n");
split = PlaceImage(fd,pw,ph,prw,prh,split,lm,bm,cnt);
}
} else {
/* NB: maintain image aspect ratio */
scale = (pw*PS_UNIT_SIZE/prw) < (ph*PS_UNIT_SIZE/prh) ?
(pw*PS_UNIT_SIZE/prw) :
(ph*PS_UNIT_SIZE/prh);
if (scale > 1.0)
scale = 1.0;
bottom_offset +=
2002-10-07 09:15:29 -04:00
(ph * PS_UNIT_SIZE - prh * scale) / (cnt?2:1);
if (cnt)
2002-10-07 09:15:29 -04:00
left_offset += (pw * PS_UNIT_SIZE - prw * scale) / 2;
fprintf(fd, "%f %f translate\n",
left_offset, bottom_offset);
fprintf(fd, "%f %f scale\n", prw * scale, prh * scale);
if (rotate)
2002-10-07 09:15:29 -04:00
fputs ("1 1 translate 180 rotate\n", fd);
}
2002-10-07 09:15:29 -04:00
} else {
1999-07-27 17:50:26 -04:00
fprintf(fd, "%f %f scale\n", prw, prh);
2002-10-07 09:15:29 -04:00
if (rotate)
fputs ("1 1 translate 180 rotate\n", fd);
}
1999-07-27 17:50:26 -04:00
PSpage(fd, tif, w, h);
fprintf(fd, "end\n");
fprintf(fd, "grestore\n");
fprintf(fd, "showpage\n");
}
if (generateEPSF)
break;
TIFFGetFieldDefaulted(tif, TIFFTAG_SUBFILETYPE, &subfiletype);
} while (((subfiletype & FILETYPE_PAGE) || printAll) &&
TIFFReadDirectory(tif));
return(npages);
}
static char DuplexPreamble[] = "\
%%BeginFeature: *Duplex True\n\
systemdict begin\n\
/languagelevel where { pop languagelevel } { 1 } ifelse\n\
2 ge { 1 dict dup /Duplex true put setpagedevice }\n\
{ statusdict /setduplex known { statusdict begin setduplex true end } if\n\
} ifelse\n\
end\n\
%%EndFeature\n\
";
static char TumblePreamble[] = "\
%%BeginFeature: *Tumble True\n\
systemdict begin\n\
/languagelevel where { pop languagelevel } { 1 } ifelse\n\
2 ge { 1 dict dup /Tumble true put setpagedevice }\n\
{ statusdict /settumble known { statusdict begin true settumble end } if\n\
1999-07-27 17:50:26 -04:00
} ifelse\n\
end\n\
%%EndFeature\n\
";
static char AvoidDeadZonePreamble[] = "\
gsave newpath clippath pathbbox grestore\n\
4 2 roll 2 copy translate\n\
exch 3 1 roll sub 3 1 roll sub exch\n\
currentpagedevice /PageSize get aload pop\n\
exch 3 1 roll div 3 1 roll div abs exch abs\n\
2 copy gt { exch } if pop\n\
dup 1 lt { dup scale } { pop } ifelse\n\
";
void
2004-06-04 10:16:14 -04:00
PSHead(FILE *fd, TIFF *tif, uint32 w, uint32 h,
double pw, double ph, double ox, double oy)
1999-07-27 17:50:26 -04:00
{
time_t t;
1999-07-27 17:50:26 -04:00
(void) tif; (void) w; (void) h;
t = time(0);
fprintf(fd, "%%!PS-Adobe-3.0%s\n", generateEPSF ? " EPSF-3.0" : "");
fprintf(fd, "%%%%Creator: tiff2ps\n");
fprintf(fd, "%%%%Title: %s\n", filename);
fprintf(fd, "%%%%CreationDate: %s", ctime(&t));
fprintf(fd, "%%%%DocumentData: Clean7Bit\n");
fprintf(fd, "%%%%Origin: %ld %ld\n", (long) ox, (long) oy);
/* NB: should use PageBoundingBox */
fprintf(fd, "%%%%BoundingBox: 0 0 %ld %ld\n",
(long) ceil(pw), (long) ceil(ph));
fprintf(fd, "%%%%LanguageLevel: %d\n", (level3 ? 3 : (level2 ? 2 : 1)));
1999-07-27 17:50:26 -04:00
fprintf(fd, "%%%%Pages: (atend)\n");
fprintf(fd, "%%%%EndComments\n");
fprintf(fd, "%%%%BeginSetup\n");
if (PSduplex)
fprintf(fd, "%s", DuplexPreamble);
1999-07-27 17:50:26 -04:00
if (PStumble)
fprintf(fd, "%s", TumblePreamble);
if (PSavoiddeadzone && (level2 || level3))
fprintf(fd, "%s", AvoidDeadZonePreamble);
1999-07-27 17:50:26 -04:00
fprintf(fd, "%%%%EndSetup\n");
}
void
PSTail(FILE *fd, int npages)
{
fprintf(fd, "%%%%Trailer\n");
fprintf(fd, "%%%%Pages: %d\n", npages);
1999-07-27 17:50:26 -04:00
fprintf(fd, "%%%%EOF\n");
}
static int
checkcmap(TIFF* tif, int n, uint16* r, uint16* g, uint16* b)
{
(void) tif;
while (n-- > 0)
if (*r++ >= 256 || *g++ >= 256 || *b++ >= 256)
return (16);
TIFFWarning(filename, "Assuming 8-bit colormap");
return (8);
}
static void
PS_Lvl2colorspace(FILE* fd, TIFF* tif)
{
uint16 *rmap, *gmap, *bmap;
int i, num_colors;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
const char * colorspace_p;
switch ( photometric )
{
case PHOTOMETRIC_SEPARATED:
colorspace_p = "CMYK";
break;
case PHOTOMETRIC_RGB:
colorspace_p = "RGB";
break;
default:
colorspace_p = "Gray";
}
1999-07-27 17:50:26 -04:00
/*
* Set up PostScript Level 2 colorspace according to
* section 4.8 in the PostScript refenence manual.
*/
fputs("% PostScript Level 2 only.\n", fd);
if (photometric != PHOTOMETRIC_PALETTE) {
if (photometric == PHOTOMETRIC_YCBCR) {
/* MORE CODE HERE */
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
fprintf(fd, "/Device%s setcolorspace\n", colorspace_p );
1999-07-27 17:50:26 -04:00
return;
}
/*
* Set up an indexed/palette colorspace
*/
num_colors = (1 << bitspersample);
if (!TIFFGetField(tif, TIFFTAG_COLORMAP, &rmap, &gmap, &bmap)) {
TIFFError(filename,
"Palette image w/o \"Colormap\" tag");
return;
}
if (checkcmap(tif, num_colors, rmap, gmap, bmap) == 16) {
/*
* Convert colormap to 8-bits values.
*/
#define CVT(x) (((x) * 255) / ((1L<<16)-1))
for (i = 0; i < num_colors; i++) {
rmap[i] = CVT(rmap[i]);
gmap[i] = CVT(gmap[i]);
bmap[i] = CVT(bmap[i]);
}
#undef CVT
}
fprintf(fd, "[ /Indexed /DeviceRGB %d", num_colors - 1);
if (ascii85) {
Ascii85Init();
fputs("\n<~", fd);
ascii85breaklen -= 2;
} else
fputs(" <", fd);
for (i = 0; i < num_colors; i++) {
if (ascii85) {
2004-06-04 10:16:14 -04:00
Ascii85Put((unsigned char)rmap[i], fd);
Ascii85Put((unsigned char)gmap[i], fd);
Ascii85Put((unsigned char)bmap[i], fd);
1999-07-27 17:50:26 -04:00
} else {
fputs((i % 8) ? " " : "\n ", fd);
fprintf(fd, "%02x%02x%02x",
rmap[i], gmap[i], bmap[i]);
}
}
if (ascii85)
Ascii85Flush(fd);
else
fputs(">\n", fd);
fputs("] setcolorspace\n", fd);
}
static int
PS_Lvl2ImageDict(FILE* fd, TIFF* tif, uint32 w, uint32 h)
{
int use_rawdata;
uint32 tile_width, tile_height;
uint16 predictor, minsamplevalue, maxsamplevalue;
int repeat_count;
char im_h[64], im_x[64], im_y[64];
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
char * imageOp = "image";
if ( useImagemask && (bitspersample == 1) )
imageOp = "imagemask";
1999-07-27 17:50:26 -04:00
(void)strcpy(im_x, "0");
(void)sprintf(im_y, "%lu", (long) h);
(void)sprintf(im_h, "%lu", (long) h);
tile_width = w;
tile_height = h;
if (TIFFIsTiled(tif)) {
repeat_count = TIFFNumberOfTiles(tif);
TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tile_width);
TIFFGetField(tif, TIFFTAG_TILELENGTH, &tile_height);
if (tile_width > w || tile_height > h ||
(w % tile_width) != 0 || (h % tile_height != 0)) {
/*
* The tiles does not fit image width and height.
* Set up a clip rectangle for the image unit square.
*/
fputs("0 0 1 1 rectclip\n", fd);
}
if (tile_width < w) {
fputs("/im_x 0 def\n", fd);
(void)strcpy(im_x, "im_x neg");
}
if (tile_height < h) {
fputs("/im_y 0 def\n", fd);
(void)sprintf(im_y, "%lu im_y sub", (unsigned long) h);
}
} else {
repeat_count = tf_numberstrips;
tile_height = tf_rowsperstrip;
if (tile_height > h)
tile_height = h;
if (repeat_count > 1) {
fputs("/im_y 0 def\n", fd);
fprintf(fd, "/im_h %lu def\n",
(unsigned long) tile_height);
(void)strcpy(im_h, "im_h");
(void)sprintf(im_y, "%lu im_y sub", (unsigned long) h);
}
}
/*
* Output start of exec block
*/
fputs("{ % exec\n", fd);
if (repeat_count > 1)
fprintf(fd, "%d { %% repeat\n", repeat_count);
/*
* Output filter options and image dictionary.
*/
if (ascii85)
fputs(" /im_stream currentfile /ASCII85Decode filter def\n",
fd);
fputs(" <<\n", fd);
fputs(" /ImageType 1\n", fd);
fprintf(fd, " /Width %lu\n", (unsigned long) tile_width);
/*
* Workaround for some software that may crash when last strip
* of image contains fewer number of scanlines than specified
* by the `/Height' variable. So for stripped images with multiple
* strips we will set `/Height' as `im_h', because one is
* recalculated for each strip - including the (smaller) final strip.
* For tiled images and images with only one strip `/Height' will
* contain number of scanlines in tile (or image height in case of
* one-stripped image).
*/
if (TIFFIsTiled(tif) || tf_numberstrips == 1)
fprintf(fd, " /Height %lu\n", (unsigned long) tile_height);
else
fprintf(fd, " /Height im_h\n");
1999-07-27 17:50:26 -04:00
if (planarconfiguration == PLANARCONFIG_SEPARATE && samplesperpixel > 1)
fputs(" /MultipleDataSources true\n", fd);
fprintf(fd, " /ImageMatrix [ %lu 0 0 %ld %s %s ]\n",
(unsigned long) w, - (long)h, im_x, im_y);
fprintf(fd, " /BitsPerComponent %d\n", bitspersample);
fprintf(fd, " /Interpolate %s\n", interpolate ? "true" : "false");
switch (samplesperpixel - extrasamples) {
1999-07-27 17:50:26 -04:00
case 1:
switch (photometric) {
case PHOTOMETRIC_MINISBLACK:
fputs(" /Decode [0 1]\n", fd);
break;
case PHOTOMETRIC_MINISWHITE:
switch (compression) {
case COMPRESSION_CCITTRLE:
case COMPRESSION_CCITTRLEW:
case COMPRESSION_CCITTFAX3:
case COMPRESSION_CCITTFAX4:
/*
* Manage inverting with /Blackis1 flag
* since there migth be uncompressed parts
*/
fputs(" /Decode [0 1]\n", fd);
break;
default:
/*
* ERROR...
*/
fputs(" /Decode [1 0]\n", fd);
break;
}
break;
case PHOTOMETRIC_PALETTE:
TIFFGetFieldDefaulted(tif, TIFFTAG_MINSAMPLEVALUE,
&minsamplevalue);
TIFFGetFieldDefaulted(tif, TIFFTAG_MAXSAMPLEVALUE,
&maxsamplevalue);
fprintf(fd, " /Decode [%u %u]\n",
minsamplevalue, maxsamplevalue);
break;
default:
/*
* ERROR ?
*/
fputs(" /Decode [0 1]\n", fd);
break;
}
break;
case 3:
switch (photometric) {
case PHOTOMETRIC_RGB:
fputs(" /Decode [0 1 0 1 0 1]\n", fd);
break;
case PHOTOMETRIC_MINISWHITE:
case PHOTOMETRIC_MINISBLACK:
default:
/*
* ERROR??
*/
fputs(" /Decode [0 1 0 1 0 1]\n", fd);
break;
}
break;
case 4:
/*
* ERROR??
*/
fputs(" /Decode [0 1 0 1 0 1 0 1]\n", fd);
break;
}
fputs(" /DataSource", fd);
if (planarconfiguration == PLANARCONFIG_SEPARATE &&
samplesperpixel > 1)
fputs(" [", fd);
if (ascii85)
fputs(" im_stream", fd);
else
fputs(" currentfile /ASCIIHexDecode filter", fd);
use_rawdata = TRUE;
switch (compression) {
case COMPRESSION_NONE: /* 1: uncompressed */
break;
case COMPRESSION_CCITTRLE: /* 2: CCITT modified Huffman RLE */
case COMPRESSION_CCITTRLEW: /* 32771: #1 w/ word alignment */
case COMPRESSION_CCITTFAX3: /* 3: CCITT Group 3 fax encoding */
case COMPRESSION_CCITTFAX4: /* 4: CCITT Group 4 fax encoding */
fputs("\n\t<<\n", fd);
if (compression == COMPRESSION_CCITTFAX3) {
uint32 g3_options;
fputs("\t /EndOfLine true\n", fd);
fputs("\t /EndOfBlock false\n", fd);
if (!TIFFGetField(tif, TIFFTAG_GROUP3OPTIONS,
&g3_options))
g3_options = 0;
if (g3_options & GROUP3OPT_2DENCODING)
fprintf(fd, "\t /K %s\n", im_h);
if (g3_options & GROUP3OPT_UNCOMPRESSED)
fputs("\t /Uncompressed true\n", fd);
if (g3_options & GROUP3OPT_FILLBITS)
fputs("\t /EncodedByteAlign true\n", fd);
}
if (compression == COMPRESSION_CCITTFAX4) {
uint32 g4_options;
fputs("\t /K -1\n", fd);
TIFFGetFieldDefaulted(tif, TIFFTAG_GROUP4OPTIONS,
&g4_options);
if (g4_options & GROUP4OPT_UNCOMPRESSED)
fputs("\t /Uncompressed true\n", fd);
}
if (!(tile_width == w && w == 1728U))
fprintf(fd, "\t /Columns %lu\n",
(unsigned long) tile_width);
fprintf(fd, "\t /Rows %s\n", im_h);
if (compression == COMPRESSION_CCITTRLE ||
compression == COMPRESSION_CCITTRLEW) {
fputs("\t /EncodedByteAlign true\n", fd);
fputs("\t /EndOfBlock false\n", fd);
}
if (photometric == PHOTOMETRIC_MINISBLACK)
fputs("\t /BlackIs1 true\n", fd);
fprintf(fd, "\t>> /CCITTFaxDecode filter");
break;
case COMPRESSION_LZW: /* 5: Lempel-Ziv & Welch */
1999-07-27 17:50:26 -04:00
TIFFGetFieldDefaulted(tif, TIFFTAG_PREDICTOR, &predictor);
if (predictor == 2) {
fputs("\n\t<<\n", fd);
fprintf(fd, "\t /Predictor %u\n", predictor);
fprintf(fd, "\t /Columns %lu\n",
(unsigned long) tile_width);
fprintf(fd, "\t /Colors %u\n", samplesperpixel);
fprintf(fd, "\t /BitsPerComponent %u\n",
bitspersample);
fputs("\t>>", fd);
}
fputs(" /LZWDecode filter", fd);
break;
case COMPRESSION_DEFLATE: /* 5: ZIP */
case COMPRESSION_ADOBE_DEFLATE:
if ( level3 ) {
TIFFGetFieldDefaulted(tif, TIFFTAG_PREDICTOR, &predictor);
if (predictor > 1) {
fprintf(fd, "\t %% PostScript Level 3 only.");
fputs("\n\t<<\n", fd);
fprintf(fd, "\t /Predictor %u\n", predictor);
fprintf(fd, "\t /Columns %lu\n",
(unsigned long) tile_width);
fprintf(fd, "\t /Colors %u\n", samplesperpixel);
fprintf(fd, "\t /BitsPerComponent %u\n",
bitspersample);
fputs("\t>>", fd);
}
fputs(" /FlateDecode filter", fd);
} else {
use_rawdata = FALSE ;
}
break;
1999-07-27 17:50:26 -04:00
case COMPRESSION_PACKBITS: /* 32773: Macintosh RLE */
fputs(" /RunLengthDecode filter", fd);
use_rawdata = TRUE;
break;
case COMPRESSION_OJPEG: /* 6: !6.0 JPEG */
case COMPRESSION_JPEG: /* 7: %JPEG DCT compression */
#ifdef notdef
/*
* Code not tested yet
*/
fputs(" /DCTDecode filter", fd);
use_rawdata = TRUE;
#else
use_rawdata = FALSE;
#endif
break;
case COMPRESSION_NEXT: /* 32766: NeXT 2-bit RLE */
case COMPRESSION_THUNDERSCAN: /* 32809: ThunderScan RLE */
case COMPRESSION_PIXARFILM: /* 32908: Pixar companded 10bit LZW */
case COMPRESSION_JBIG: /* 34661: ISO JBIG */
use_rawdata = FALSE;
break;
case COMPRESSION_SGILOG: /* 34676: SGI LogL or LogLuv */
case COMPRESSION_SGILOG24: /* 34677: SGI 24-bit LogLuv */
use_rawdata = FALSE;
break;
default:
/*
* ERROR...
*/
use_rawdata = FALSE;
break;
}
if (planarconfiguration == PLANARCONFIG_SEPARATE &&
samplesperpixel > 1) {
uint16 i;
/*
* NOTE: This code does not work yet...
*/
for (i = 1; i < samplesperpixel; i++)
fputs(" dup", fd);
fputs(" ]", fd);
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
fprintf( fd, "\n >> %s\n", imageOp );
1999-07-27 17:50:26 -04:00
if (ascii85)
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
fputs(" im_stream status { im_stream flushfile } if\n", fd);
1999-07-27 17:50:26 -04:00
if (repeat_count > 1) {
if (tile_width < w) {
fprintf(fd, " /im_x im_x %lu add def\n",
(unsigned long) tile_width);
if (tile_height < h) {
fprintf(fd, " im_x %lu ge {\n",
(unsigned long) w);
fputs(" /im_x 0 def\n", fd);
fprintf(fd, " /im_y im_y %lu add def\n",
(unsigned long) tile_height);
fputs(" } if\n", fd);
}
}
if (tile_height < h) {
if (tile_width >= w) {
fprintf(fd, " /im_y im_y %lu add def\n",
(unsigned long) tile_height);
if (!TIFFIsTiled(tif)) {
fprintf(fd, " /im_h %lu im_y sub",
(unsigned long) h);
fprintf(fd, " dup %lu gt { pop",
(unsigned long) tile_height);
fprintf(fd, " %lu } if def\n",
(unsigned long) tile_height);
}
}
}
fputs("} repeat\n", fd);
}
/*
* End of exec function
*/
fputs("}\n", fd);
return(use_rawdata);
}
int
PS_Lvl2page(FILE* fd, TIFF* tif, uint32 w, uint32 h)
{
uint16 fillorder;
int use_rawdata, tiled_image, breaklen = 0;
1999-07-27 17:50:26 -04:00
uint32 chunk_no, num_chunks, *bc;
unsigned char *buf_data, *cp;
tsize_t chunk_size, byte_count;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
int ascii85_l; /* Length, in bytes, of ascii85_p[] data */
uint8 * ascii85_p = 0; /* Holds ASCII85 encoded data */
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#endif
1999-07-27 17:50:26 -04:00
PS_Lvl2colorspace(fd, tif);
use_rawdata = PS_Lvl2ImageDict(fd, tif, w, h);
/* See http://bugzilla.remotesensing.org/show_bug.cgi?id=80 */
#ifdef ENABLE_BROKEN_BEGINENDDATA
1999-07-27 17:50:26 -04:00
fputs("%%BeginData:\n", fd);
#endif
1999-07-27 17:50:26 -04:00
fputs("exec\n", fd);
tiled_image = TIFFIsTiled(tif);
if (tiled_image) {
num_chunks = TIFFNumberOfTiles(tif);
TIFFGetField(tif, TIFFTAG_TILEBYTECOUNTS, &bc);
} else {
num_chunks = TIFFNumberOfStrips(tif);
TIFFGetField(tif, TIFFTAG_STRIPBYTECOUNTS, &bc);
}
if (use_rawdata) {
2004-06-04 10:16:14 -04:00
chunk_size = (tsize_t) bc[0];
1999-07-27 17:50:26 -04:00
for (chunk_no = 1; chunk_no < num_chunks; chunk_no++)
2004-06-04 10:16:14 -04:00
if ((tsize_t) bc[chunk_no] > chunk_size)
chunk_size = (tsize_t) bc[chunk_no];
1999-07-27 17:50:26 -04:00
} else {
if (tiled_image)
chunk_size = TIFFTileSize(tif);
else
chunk_size = TIFFStripSize(tif);
}
buf_data = (unsigned char *)_TIFFmalloc(chunk_size);
if (!buf_data) {
TIFFError(filename, "Can't alloc %u bytes for %s.",
chunk_size, tiled_image ? "tiles" : "strips");
return(FALSE);
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
if ( ascii85 ) {
/*
* Allocate a buffer to hold the ASCII85 encoded data. Note
* that it is allocated with sufficient room to hold the
* encoded data (5*chunk_size/4) plus the EOD marker (+8)
* and formatting line breaks. The line breaks are more
* than taken care of by using 6*chunk_size/4 rather than
* 5*chunk_size/4.
*/
ascii85_p = _TIFFmalloc( (chunk_size+(chunk_size/2)) + 8 );
if ( !ascii85_p ) {
_TIFFfree( buf_data );
TIFFError( filename, "Cannot allocate ASCII85 encoding buffer." );
return ( FALSE );
}
}
#endif
1999-07-27 17:50:26 -04:00
TIFFGetFieldDefaulted(tif, TIFFTAG_FILLORDER, &fillorder);
for (chunk_no = 0; chunk_no < num_chunks; chunk_no++) {
if (ascii85)
Ascii85Init();
else
breaklen = 36;
if (use_rawdata) {
if (tiled_image)
byte_count = TIFFReadRawTile(tif, chunk_no,
buf_data, chunk_size);
else
byte_count = TIFFReadRawStrip(tif, chunk_no,
buf_data, chunk_size);
if (fillorder == FILLORDER_LSB2MSB)
TIFFReverseBits(buf_data, byte_count);
} else {
if (tiled_image)
byte_count = TIFFReadEncodedTile(tif,
chunk_no, buf_data,
chunk_size);
else
byte_count = TIFFReadEncodedStrip(tif,
chunk_no, buf_data,
chunk_size);
}
if (byte_count < 0) {
TIFFError(filename, "Can't read %s %d.",
tiled_image ? "tile" : "strip", chunk_no);
if (ascii85)
Ascii85Put('\0', fd);
}
/*
* For images with alpha, matte against a white background;
* i.e. Cback * (1 - Aimage) where Cback = 1. We will fill the
* lower part of the buffer with the modified values.
*
* XXX: needs better solution
*/
if (alpha) {
int adjust, i, j = 0;
int ncomps = samplesperpixel - extrasamples;
for (i = 0; i < byte_count; i+=samplesperpixel) {
adjust = 255 - buf_data[i + ncomps];
switch (ncomps) {
case 1:
buf_data[j++] = buf_data[i] + adjust;
break;
case 2:
buf_data[j++] = buf_data[i] + adjust;
buf_data[j++] = buf_data[i+1] + adjust;
break;
case 3:
buf_data[j++] = buf_data[i] + adjust;
buf_data[j++] = buf_data[i+1] + adjust;
buf_data[j++] = buf_data[i+2] + adjust;
break;
}
}
byte_count -= j;
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
if (ascii85) {
#if defined( EXP_ASCII85ENCODER )
ascii85_l = Ascii85EncodeBlock(ascii85_p, 1, buf_data, byte_count );
if ( ascii85_l > 0 )
fwrite( ascii85_p, ascii85_l, 1, fd );
#else
for (cp = buf_data; byte_count > 0; byte_count--)
1999-07-27 17:50:26 -04:00
Ascii85Put(*cp++, fd);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#endif
}
else
{
for (cp = buf_data; byte_count > 0; byte_count--) {
putc(hex[((*cp)>>4)&0xf], fd);
putc(hex[(*cp)&0xf], fd);
cp++;
1999-07-27 17:50:26 -04:00
if (--breaklen <= 0) {
putc('\n', fd);
breaklen = 36;
}
}
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
if ( !ascii85 ) {
if ( level2 || level3 )
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
putc( '>', fd );
1999-07-27 17:50:26 -04:00
putc('\n', fd);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
}
#if !defined( EXP_ASCII85ENCODER )
else
Ascii85Flush(fd);
#endif
1999-07-27 17:50:26 -04:00
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
if ( ascii85_p )
_TIFFfree( ascii85_p );
#endif
1999-07-27 17:50:26 -04:00
_TIFFfree(buf_data);
#ifdef ENABLE_BROKEN_BEGINENDDATA
1999-07-27 17:50:26 -04:00
fputs("%%EndData\n", fd);
#endif
1999-07-27 17:50:26 -04:00
return(TRUE);
}
void
PSpage(FILE* fd, TIFF* tif, uint32 w, uint32 h)
{
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
char * imageOp = "image";
if ( useImagemask && (bitspersample == 1) )
imageOp = "imagemask";
if ((level2 || level3) && PS_Lvl2page(fd, tif, w, h))
1999-07-27 17:50:26 -04:00
return;
ps_bytesperrow = tf_bytesperrow - (extrasamples * bitspersample / 8)*w;
1999-07-27 17:50:26 -04:00
switch (photometric) {
case PHOTOMETRIC_RGB:
if (planarconfiguration == PLANARCONFIG_CONTIG) {
fprintf(fd, "%s", RGBcolorimage);
PSColorContigPreamble(fd, w, h, 3);
PSDataColorContig(fd, tif, w, h, 3);
} else {
PSColorSeparatePreamble(fd, w, h, 3);
PSDataColorSeparate(fd, tif, w, h, 3);
}
break;
case PHOTOMETRIC_SEPARATED:
/* XXX should emit CMYKcolorimage */
if (planarconfiguration == PLANARCONFIG_CONTIG) {
PSColorContigPreamble(fd, w, h, 4);
PSDataColorContig(fd, tif, w, h, 4);
} else {
PSColorSeparatePreamble(fd, w, h, 4);
PSDataColorSeparate(fd, tif, w, h, 4);
}
break;
case PHOTOMETRIC_PALETTE:
fprintf(fd, "%s", RGBcolorimage);
PhotoshopBanner(fd, w, h, 1, 3, "false 3 colorimage");
fprintf(fd, "/scanLine %ld string def\n",
(long) ps_bytesperrow * 3L);
1999-07-27 17:50:26 -04:00
fprintf(fd, "%lu %lu 8\n",
(unsigned long) w, (unsigned long) h);
fprintf(fd, "[%lu 0 0 -%lu 0 %lu]\n",
(unsigned long) w, (unsigned long) h, (unsigned long) h);
fprintf(fd, "{currentfile scanLine readhexstring pop} bind\n");
fprintf(fd, "false 3 colorimage\n");
PSDataPalette(fd, tif, w, h);
break;
case PHOTOMETRIC_MINISBLACK:
case PHOTOMETRIC_MINISWHITE:
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
PhotoshopBanner(fd, w, h, 1, 1, imageOp);
1999-07-27 17:50:26 -04:00
fprintf(fd, "/scanLine %ld string def\n",
(long) ps_bytesperrow);
fprintf(fd, "%lu %lu %d\n",
(unsigned long) w, (unsigned long) h, bitspersample);
fprintf(fd, "[%lu 0 0 -%lu 0 %lu]\n",
(unsigned long) w, (unsigned long) h, (unsigned long) h);
fprintf(fd,
"{currentfile scanLine readhexstring pop} bind\n");
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
fprintf(fd, "%s\n", imageOp);
1999-07-27 17:50:26 -04:00
PSDataBW(fd, tif, w, h);
break;
}
putc('\n', fd);
}
void
PSColorContigPreamble(FILE* fd, uint32 w, uint32 h, int nc)
{
ps_bytesperrow = nc * (tf_bytesperrow / samplesperpixel);
PhotoshopBanner(fd, w, h, 1, nc, "false %d colorimage");
fprintf(fd, "/line %ld string def\n", (long) ps_bytesperrow);
fprintf(fd, "%lu %lu %d\n",
(unsigned long) w, (unsigned long) h, bitspersample);
fprintf(fd, "[%lu 0 0 -%lu 0 %lu]\n",
(unsigned long) w, (unsigned long) h, (unsigned long) h);
fprintf(fd, "{currentfile line readhexstring pop} bind\n");
fprintf(fd, "false %d colorimage\n", nc);
}
void
PSColorSeparatePreamble(FILE* fd, uint32 w, uint32 h, int nc)
{
int i;
PhotoshopBanner(fd, w, h, ps_bytesperrow, nc, "true %d colorimage");
for (i = 0; i < nc; i++)
fprintf(fd, "/line%d %ld string def\n",
i, (long) ps_bytesperrow);
fprintf(fd, "%lu %lu %d\n",
(unsigned long) w, (unsigned long) h, bitspersample);
fprintf(fd, "[%lu 0 0 -%lu 0 %lu] \n",
(unsigned long) w, (unsigned long) h, (unsigned long) h);
for (i = 0; i < nc; i++)
fprintf(fd, "{currentfile line%d readhexstring pop}bind\n", i);
fprintf(fd, "true %d colorimage\n", nc);
}
#define MAXLINE 36
#define DOBREAK(len, howmany, fd) \
if (((len) -= (howmany)) <= 0) { \
putc('\n', fd); \
(len) = MAXLINE-(howmany); \
}
#define PUTHEX(c,fd) putc(hex[((c)>>4)&0xf],fd); putc(hex[(c)&0xf],fd)
void
PSDataColorContig(FILE* fd, TIFF* tif, uint32 w, uint32 h, int nc)
{
uint32 row;
int breaklen = MAXLINE, cc, es = samplesperpixel - nc;
unsigned char *tf_buf;
unsigned char *cp, c;
(void) w;
tf_buf = (unsigned char *) _TIFFmalloc(tf_bytesperrow);
if (tf_buf == NULL) {
TIFFError(filename, "No space for scanline buffer");
return;
}
for (row = 0; row < h; row++) {
if (TIFFReadScanline(tif, tf_buf, row, 0) < 0)
break;
cp = tf_buf;
if (alpha) {
int adjust;
cc = 0;
for (; cc < tf_bytesperrow; cc += samplesperpixel) {
DOBREAK(breaklen, nc, fd);
/*
* For images with alpha, matte against
* a white background; i.e.
* Cback * (1 - Aimage)
* where Cback = 1.
*/
adjust = 255 - cp[nc];
switch (nc) {
case 4: c = *cp++ + adjust; PUTHEX(c,fd);
case 3: c = *cp++ + adjust; PUTHEX(c,fd);
case 2: c = *cp++ + adjust; PUTHEX(c,fd);
case 1: c = *cp++ + adjust; PUTHEX(c,fd);
}
cp += es;
}
} else {
cc = 0;
for (; cc < tf_bytesperrow; cc += samplesperpixel) {
DOBREAK(breaklen, nc, fd);
switch (nc) {
case 4: c = *cp++; PUTHEX(c,fd);
case 3: c = *cp++; PUTHEX(c,fd);
case 2: c = *cp++; PUTHEX(c,fd);
case 1: c = *cp++; PUTHEX(c,fd);
}
cp += es;
}
}
}
_TIFFfree((char *) tf_buf);
}
void
PSDataColorSeparate(FILE* fd, TIFF* tif, uint32 w, uint32 h, int nc)
{
uint32 row;
2004-06-04 10:16:14 -04:00
int breaklen = MAXLINE, cc;
tsample_t s, maxs;
1999-07-27 17:50:26 -04:00
unsigned char *tf_buf;
unsigned char *cp, c;
(void) w;
tf_buf = (unsigned char *) _TIFFmalloc(tf_bytesperrow);
if (tf_buf == NULL) {
TIFFError(filename, "No space for scanline buffer");
return;
}
maxs = (samplesperpixel > nc ? nc : samplesperpixel);
for (row = 0; row < h; row++) {
for (s = 0; s < maxs; s++) {
if (TIFFReadScanline(tif, tf_buf, row, s) < 0)
break;
for (cp = tf_buf, cc = 0; cc < tf_bytesperrow; cc++) {
DOBREAK(breaklen, 1, fd);
c = *cp++;
PUTHEX(c,fd);
}
}
}
_TIFFfree((char *) tf_buf);
}
#define PUTRGBHEX(c,fd) \
PUTHEX(rmap[c],fd); PUTHEX(gmap[c],fd); PUTHEX(bmap[c],fd)
void
PSDataPalette(FILE* fd, TIFF* tif, uint32 w, uint32 h)
{
uint16 *rmap, *gmap, *bmap;
uint32 row;
int breaklen = MAXLINE, cc, nc;
unsigned char *tf_buf;
unsigned char *cp, c;
(void) w;
if (!TIFFGetField(tif, TIFFTAG_COLORMAP, &rmap, &gmap, &bmap)) {
TIFFError(filename, "Palette image w/o \"Colormap\" tag");
return;
}
switch (bitspersample) {
case 8: case 4: case 2: case 1:
break;
default:
TIFFError(filename, "Depth %d not supported", bitspersample);
return;
}
nc = 3 * (8 / bitspersample);
tf_buf = (unsigned char *) _TIFFmalloc(tf_bytesperrow);
if (tf_buf == NULL) {
TIFFError(filename, "No space for scanline buffer");
return;
}
if (checkcmap(tif, 1<<bitspersample, rmap, gmap, bmap) == 16) {
int i;
2004-06-04 10:16:14 -04:00
#define CVT(x) ((unsigned short) (((x) * 255) / ((1U<<16)-1)))
1999-07-27 17:50:26 -04:00
for (i = (1<<bitspersample)-1; i >= 0; i--) {
rmap[i] = CVT(rmap[i]);
gmap[i] = CVT(gmap[i]);
bmap[i] = CVT(bmap[i]);
}
#undef CVT
}
for (row = 0; row < h; row++) {
if (TIFFReadScanline(tif, tf_buf, row, 0) < 0)
break;
for (cp = tf_buf, cc = 0; cc < tf_bytesperrow; cc++) {
DOBREAK(breaklen, nc, fd);
switch (bitspersample) {
case 8:
c = *cp++; PUTRGBHEX(c, fd);
break;
case 4:
c = *cp++; PUTRGBHEX(c&0xf, fd);
c >>= 4; PUTRGBHEX(c, fd);
break;
case 2:
c = *cp++; PUTRGBHEX(c&0x3, fd);
c >>= 2; PUTRGBHEX(c&0x3, fd);
c >>= 2; PUTRGBHEX(c&0x3, fd);
c >>= 2; PUTRGBHEX(c, fd);
break;
case 1:
c = *cp++; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c&0x1, fd);
c >>= 1; PUTRGBHEX(c, fd);
break;
}
}
}
_TIFFfree((char *) tf_buf);
}
void
PSDataBW(FILE* fd, TIFF* tif, uint32 w, uint32 h)
{
int breaklen = MAXLINE;
unsigned char* tf_buf;
unsigned char* cp;
tsize_t stripsize = TIFFStripSize(tif);
tstrip_t s;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
int ascii85_l; /* Length, in bytes, of ascii85_p[] data */
uint8 *ascii85_p = 0; /* Holds ASCII85 encoded data */
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#endif
1999-07-27 17:50:26 -04:00
(void) w; (void) h;
tf_buf = (unsigned char *) _TIFFmalloc(stripsize);
memset(tf_buf, 0, stripsize);
1999-07-27 17:50:26 -04:00
if (tf_buf == NULL) {
TIFFError(filename, "No space for scanline buffer");
return;
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
if ( ascii85 ) {
/*
* Allocate a buffer to hold the ASCII85 encoded data. Note
* that it is allocated with sufficient room to hold the
* encoded data (5*stripsize/4) plus the EOD marker (+8)
* and formatting line breaks. The line breaks are more
* than taken care of by using 6*stripsize/4 rather than
* 5*stripsize/4.
*/
ascii85_p = _TIFFmalloc( (stripsize+(stripsize/2)) + 8 );
if ( !ascii85_p ) {
_TIFFfree( tf_buf );
TIFFError( filename, "Cannot allocate ASCII85 encoding buffer." );
return;
}
}
#endif
1999-07-27 17:50:26 -04:00
if (ascii85)
Ascii85Init();
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
1999-07-27 17:50:26 -04:00
for (s = 0; s < TIFFNumberOfStrips(tif); s++) {
int cc = TIFFReadEncodedStrip(tif, s, tf_buf, stripsize);
if (cc < 0) {
TIFFError(filename, "Can't read strip");
break;
}
cp = tf_buf;
if (photometric == PHOTOMETRIC_MINISWHITE) {
for (cp += cc; --cp >= tf_buf;)
*cp = ~*cp;
cp++;
}
if (ascii85) {
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
if (alpha) {
int adjust, i;
for (i = 0; i < cc; i+=2) {
adjust = 255 - cp[i + 1];
cp[i / 2] = cp[i] + adjust;
}
cc /= 2;
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
ascii85_l = Ascii85EncodeBlock( ascii85_p, 1, cp, cc );
if ( ascii85_l > 0 )
fwrite( ascii85_p, ascii85_l, 1, fd );
#else
1999-07-27 17:50:26 -04:00
while (cc-- > 0)
Ascii85Put(*cp++, fd);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#endif /* EXP_ASCII85_ENCODER */
1999-07-27 17:50:26 -04:00
} else {
unsigned char c;
if (alpha) {
int adjust;
while (cc-- > 0) {
DOBREAK(breaklen, 1, fd);
/*
* For images with alpha, matte against
* a white background; i.e.
* Cback * (1 - Aimage)
* where Cback = 1.
*/
adjust = 255 - cp[1];
c = *cp++ + adjust; PUTHEX(c,fd);
cp++, cc--;
}
} else {
while (cc-- > 0) {
c = *cp++;
DOBREAK(breaklen, 1, fd);
PUTHEX(c, fd);
}
1999-07-27 17:50:26 -04:00
}
}
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
if ( !ascii85 )
{
if ( level2 || level3)
fputs(">\n", fd);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
}
#if !defined( EXP_ASCII85ENCODER )
else
Ascii85Flush(fd);
#else
if ( ascii85_p )
_TIFFfree( ascii85_p );
#endif
1999-07-27 17:50:26 -04:00
_TIFFfree(tf_buf);
}
void
PSRawDataBW(FILE* fd, TIFF* tif, uint32 w, uint32 h)
{
uint32 *bc;
uint32 bufsize;
int breaklen = MAXLINE, cc;
uint16 fillorder;
unsigned char *tf_buf;
unsigned char *cp, c;
tstrip_t s;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
int ascii85_l; /* Length, in bytes, of ascii85_p[] data */
uint8 * ascii85_p = 0; /* Holds ASCII85 encoded data */
#endif
1999-07-27 17:50:26 -04:00
(void) w; (void) h;
TIFFGetFieldDefaulted(tif, TIFFTAG_FILLORDER, &fillorder);
TIFFGetField(tif, TIFFTAG_STRIPBYTECOUNTS, &bc);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
/*
* Find largest strip:
*/
1999-07-27 17:50:26 -04:00
bufsize = bc[0];
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
2004-06-04 10:16:14 -04:00
for ( s = 0; ++s < (tstrip_t)tf_numberstrips; ) {
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
if ( bc[s] > bufsize )
bufsize = bc[s];
}
1999-07-27 17:50:26 -04:00
tf_buf = (unsigned char*) _TIFFmalloc(bufsize);
if (tf_buf == NULL) {
TIFFError(filename, "No space for strip buffer");
return;
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
if ( ascii85 ) {
/*
* Allocate a buffer to hold the ASCII85 encoded data. Note
* that it is allocated with sufficient room to hold the
* encoded data (5*bufsize/4) plus the EOD marker (+8)
* and formatting line breaks. The line breaks are more
* than taken care of by using 6*bufsize/4 rather than
* 5*bufsize/4.
*/
ascii85_p = _TIFFmalloc( (bufsize+(bufsize/2)) + 8 );
if ( !ascii85_p ) {
_TIFFfree( tf_buf );
TIFFError( filename, "Cannot allocate ASCII85 encoding buffer." );
return;
}
}
#endif
2004-06-04 10:16:14 -04:00
for (s = 0; s < (tstrip_t) tf_numberstrips; s++) {
1999-07-27 17:50:26 -04:00
cc = TIFFReadRawStrip(tif, s, tf_buf, bc[s]);
if (cc < 0) {
TIFFError(filename, "Can't read strip");
break;
}
if (fillorder == FILLORDER_LSB2MSB)
TIFFReverseBits(tf_buf, cc);
if (!ascii85) {
for (cp = tf_buf; cc > 0; cc--) {
DOBREAK(breaklen, 1, fd);
c = *cp++;
PUTHEX(c, fd);
}
fputs(">\n", fd);
breaklen = MAXLINE;
} else {
Ascii85Init();
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
ascii85_l = Ascii85EncodeBlock( ascii85_p, 1, tf_buf, cc );
if ( ascii85_l > 0 )
fwrite( ascii85_p, ascii85_l, 1, fd );
#else
1999-07-27 17:50:26 -04:00
for (cp = tf_buf; cc > 0; cc--)
Ascii85Put(*cp++, fd);
Ascii85Flush(fd);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#endif /* EXP_ASCII85ENCODER */
1999-07-27 17:50:26 -04:00
}
}
_TIFFfree((char *) tf_buf);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER )
if ( ascii85_p )
_TIFFfree( ascii85_p );
#endif
1999-07-27 17:50:26 -04:00
}
void
Ascii85Init(void)
{
ascii85breaklen = 2*MAXLINE;
ascii85count = 0;
}
static char*
Ascii85Encode(unsigned char* raw)
{
static char encoded[6];
uint32 word;
word = (((raw[0]<<8)+raw[1])<<16) + (raw[2]<<8) + raw[3];
if (word != 0L) {
uint32 q;
uint16 w1;
q = word / (85L*85*85*85); /* actually only a byte */
2004-06-04 10:16:14 -04:00
encoded[0] = (char) (q + '!');
1999-07-27 17:50:26 -04:00
word -= q * (85L*85*85*85); q = word / (85L*85*85);
2004-06-04 10:16:14 -04:00
encoded[1] = (char) (q + '!');
1999-07-27 17:50:26 -04:00
word -= q * (85L*85*85); q = word / (85*85);
2004-06-04 10:16:14 -04:00
encoded[2] = (char) (q + '!');
1999-07-27 17:50:26 -04:00
w1 = (uint16) (word - q*(85L*85));
2004-06-04 10:16:14 -04:00
encoded[3] = (char) ((w1 / 85) + '!');
encoded[4] = (char) ((w1 % 85) + '!');
1999-07-27 17:50:26 -04:00
encoded[5] = '\0';
} else
encoded[0] = 'z', encoded[1] = '\0';
return (encoded);
}
void
Ascii85Put(unsigned char code, FILE* fd)
{
ascii85buf[ascii85count++] = code;
if (ascii85count >= 4) {
unsigned char* p;
int n;
for (n = ascii85count, p = ascii85buf; n >= 4; n -= 4, p += 4) {
char* cp;
for (cp = Ascii85Encode(p); *cp; cp++) {
putc(*cp, fd);
if (--ascii85breaklen == 0) {
putc('\n', fd);
ascii85breaklen = 2*MAXLINE;
}
}
}
_TIFFmemcpy(ascii85buf, p, n);
ascii85count = n;
}
}
void
Ascii85Flush(FILE* fd)
{
if (ascii85count > 0) {
char* res;
_TIFFmemset(&ascii85buf[ascii85count], 0, 3);
res = Ascii85Encode(ascii85buf);
fwrite(res[0] == 'z' ? "!!!!" : res, ascii85count + 1, 1, fd);
}
fputs("~>\n", fd);
}
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
#if defined( EXP_ASCII85ENCODER)
#define A85BREAKCNTR ascii85breaklen
#define A85BREAKLEN (2*MAXLINE)
/*****************************************************************************
*
* Name: Ascii85EncodeBlock( ascii85_p, f_eod, raw_p, raw_l )
*
* Description: This routine will encode the raw data in the buffer described
* by raw_p and raw_l into ASCII85 format and store the encoding
* in the buffer given by ascii85_p.
*
* Parameters: ascii85_p - A buffer supplied by the caller which will
* contain the encoded ASCII85 data.
* f_eod - Flag: Nz means to end the encoded buffer with
* an End-Of-Data marker.
* raw_p - Pointer to the buffer of data to be encoded
* raw_l - Number of bytes in raw_p[] to be encoded
*
* Returns: (int) < 0 Error, see errno
* >= 0 Number of bytes written to ascii85_p[].
*
* Notes: An external variable given by A85BREAKCNTR is used to
* determine when to insert newline characters into the
* encoded data. As each byte is placed into ascii85_p this
* external is decremented. If the variable is decrement to
* or past zero then a newline is inserted into ascii85_p
* and the A85BREAKCNTR is then reset to A85BREAKLEN.
* Note: for efficiency reasons the A85BREAKCNTR variable
* is not actually checked on *every* character
* placed into ascii85_p but often only for every
* 5 characters.
*
* THE CALLER IS RESPONSIBLE FOR ENSURING THAT ASCII85_P[] IS
* SUFFICIENTLY LARGE TO THE ENCODED DATA!
* You will need at least 5 * (raw_l/4) bytes plus space for
* newline characters and space for an EOD marker (if
* requested). A safe calculation is to use 6*(raw_l/4) + 8
* to size ascii85_p.
*
*****************************************************************************/
int Ascii85EncodeBlock( uint8 * ascii85_p, unsigned f_eod, const uint8 * raw_p, int raw_l )
{
char ascii85[5]; /* Encoded 5 tuple */
int ascii85_l; /* Number of bytes written to ascii85_p[] */
int rc; /* Return code */
uint32 val32; /* Unencoded 4 tuple */
ascii85_l = 0; /* Nothing written yet */
if ( raw_p )
{
--raw_p; /* Prepare for pre-increment fetches */
for ( ; raw_l > 3; raw_l -= 4 )
{
val32 = *(++raw_p) << 24;
val32 += *(++raw_p) << 16;
val32 += *(++raw_p) << 8;
val32 += *(++raw_p);
if ( val32 == 0 ) /* Special case */
{
ascii85_p[ascii85_l] = 'z';
rc = 1;
}
else
{
2004-06-04 10:16:14 -04:00
ascii85[4] = (char) ((val32 % 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
val32 /= 85;
2004-06-04 10:16:14 -04:00
ascii85[3] = (char) ((val32 % 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
val32 /= 85;
2004-06-04 10:16:14 -04:00
ascii85[2] = (char) ((val32 % 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
val32 /= 85;
2004-06-04 10:16:14 -04:00
ascii85[1] = (char) ((val32 % 85) + 33);
ascii85[0] = (char) ((val32 / 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
_TIFFmemcpy( &ascii85_p[ascii85_l], ascii85, sizeof(ascii85) );
rc = sizeof(ascii85);
}
ascii85_l += rc;
if ( (A85BREAKCNTR -= rc) <= 0 )
{
ascii85_p[ascii85_l] = '\n';
++ascii85_l;
A85BREAKCNTR = A85BREAKLEN;
}
}
/*
* Output any straggler bytes:
*/
if ( raw_l > 0 )
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
{
int len; /* Output this many bytes */
len = raw_l + 1;
val32 = *++raw_p << 24; /* Prime the pump */
if ( --raw_l > 0 ) val32 += *(++raw_p) << 16;
if ( --raw_l > 0 ) val32 += *(++raw_p) << 8;
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
val32 /= 85;
2004-06-04 10:16:14 -04:00
ascii85[3] = (char) ((val32 % 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
val32 /= 85;
2004-06-04 10:16:14 -04:00
ascii85[2] = (char) ((val32 % 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
val32 /= 85;
2004-06-04 10:16:14 -04:00
ascii85[1] = (char) ((val32 % 85) + 33);
ascii85[0] = (char) ((val32 / 85) + 33);
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
_TIFFmemcpy( &ascii85_p[ascii85_l], ascii85, len );
ascii85_l += len;
}
}
/*
* If requested add an ASCII85 End Of Data marker:
*/
if ( f_eod )
{
ascii85_p[ascii85_l++] = '~';
ascii85_p[ascii85_l++] = '>';
ascii85_p[ascii85_l++] = '\n';
}
return ( ascii85_l );
} /* Ascii85EncodeBlock() */
#endif /* EXP_ASCII85ENCODER */
1999-07-27 17:50:26 -04:00
char* stuff[] = {
"usage: tiff2ps [options] input.tif ...",
"where options are:",
" -1 generate PostScript Level 1 (default)",
" -2 generate PostScript Level 2",
" -3 generate PostScript Level 3",
" -8 disable use of ASCII85 encoding with PostScript Level 2/3",
" -a convert all directories in file (default is first)",
" -b # set the bottom margin to # inches",
" -c center image (-b and -l still add to this)",
1999-07-27 17:50:26 -04:00
" -d # convert directory number #",
" -D enable duplex printing (two pages per sheet of paper)",
" -e generate Encapsulated PostScript (EPS) (implies -z)",
1999-07-27 17:50:26 -04:00
" -h # assume printed page height is # inches (default 11)",
" -w # assume printed page width is # inches (default 8.5)",
" -H # split image if height is more than # inches",
" -L # overLap split images by # inches",
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
" -i # enable/disable (Nz/0) pixel interpolation (default: enable)",
" -l # set the left margin to # inches",
Broad changes to tiff2ps by Bruce A. Mallett. Fixed PS_Lvl2page() code which outputs non-ASCII85 raw data. Moved test for when to output a line break to *after* the output of a character. This just serves to fix an eye-nuisance where the first line of raw data was one character shorter than subsequent lines. Added an experimental ASCII85 encoder which can be used only when there is a single buffer of bytes to be encoded. This version is much faster at encoding a straight-line buffer of data because it can avoid alot of the loop overhead of the byte-by-bye version. To use this version you need to define EXP_ASCII85ENCODER (experimental ...). Added bug fix given by Michael Schmidt to PS_Lvl2page() in which an end-of-data marker ('>') was not being output when producing non-ASCII85 encoded PostScript Level 2 data. Fixed PS_Lvl2colorspace() so that it no longer assumes that a TIFF having more than 2 planes is a CMYK. This routine no longer looks at the samples per pixel but instead looks at the "photometric" value. This change allows support of CMYK TIFFs. Modified the PostScript L2 imaging loop so as to test if the input stream is still open before attempting to do a flushfile on it. This was done because some RIPs close the stream after doing the image operation. Got rid of the realloc() being done inside a loop in the PSRawDataBW() routine. The code now walks through the byte-size array outside the loop to determine the largest size memory block that will be needed. Added "-m" switch to ask tiff2ps to, where possible, use the "imagemask" operator instead of the "image" operator. Added the "-i #" switch to allow interpolation to be disabled. Unrolled a loop or two to improve performance.
2001-03-28 20:34:33 -05:00
" -m use \"imagemask\" operator instead of \"image\"",
1999-07-27 17:50:26 -04:00
" -o # convert directory at file offset #",
" -O file write PostScript to file instead of standard output",
" -p generate regular PostScript",
" -r rotate by 180 degrees",
1999-07-27 17:50:26 -04:00
" -s generate PostScript for a single image",
" -T print pages for top edge binding",
2002-10-10 10:19:26 -04:00
" -x override resolution units as centimeters",
" -y override resolution units as inches",
" -z enable printing in the deadzone (only for PostScript Level 2/3)",
1999-07-27 17:50:26 -04:00
NULL
};
static void
usage(int code)
{
char buf[BUFSIZ];
int i;
setbuf(stderr, buf);
fprintf(stderr, "%s\n\n", TIFFGetVersion());
1999-07-27 17:50:26 -04:00
for (i = 0; stuff[i] != NULL; i++)
fprintf(stderr, "%s\n", stuff[i]);
exit(code);
}