cheng/libpng
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
fdc2d5f38f
libpng/png.h
Glenn Randers-Pehrson 67a289ffa9 [libpng16] Fixed some spelling/typos
2013-04-19 19:03:34 -05:00

3304 lines
145 KiB
C
Raw Blame History

/* png.h - header file for PNG reference library
*
* libpng version 1.6.2rc03 - April 19, 2013
* Copyright (c) 1998-2013 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
* This code is released under the libpng license (See LICENSE, below)
*
* Authors and maintainers:
* libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
* libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger
* libpng versions 0.97, January 1998, through 1.6.2rc03 - April 19, 2013: Glenn
* See also "Contributing Authors", below.
*
* Note about libpng version numbers:
*
* Due to various miscommunications, unforeseen code incompatibilities
* and occasional factors outside the authors' control, version numbering
* on the library has not always been consistent and straightforward.
* The following table summarizes matters since version 0.89c, which was
* the first widely used release:
*
* source png.h png.h shared-lib
* version string int version
* ------- ------ ----- ----------
* 0.89c "1.0 beta 3" 0.89 89 1.0.89
* 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90]
* 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95]
* 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96]
* 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97]
* 0.97c 0.97 97 2.0.97
* 0.98 0.98 98 2.0.98
* 0.99 0.99 98 2.0.99
* 0.99a-m 0.99 99 2.0.99
* 1.00 1.00 100 2.1.0 [100 should be 10000]
* 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000]
* 1.0.1 png.h string is 10001 2.1.0
* 1.0.1a-e identical to the 10002 from here on, the shared library
* 1.0.2 source version) 10002 is 2.V where V is the source code
* 1.0.2a-b 10003 version, except as noted.
* 1.0.3 10003
* 1.0.3a-d 10004
* 1.0.4 10004
* 1.0.4a-f 10005
* 1.0.5 (+ 2 patches) 10005
* 1.0.5a-d 10006
* 1.0.5e-r 10100 (not source compatible)
* 1.0.5s-v 10006 (not binary compatible)
* 1.0.6 (+ 3 patches) 10006 (still binary incompatible)
* 1.0.6d-f 10007 (still binary incompatible)
* 1.0.6g 10007
* 1.0.6h 10007 10.6h (testing xy.z so-numbering)
* 1.0.6i 10007 10.6i
* 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0)
* 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible)
* 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible)
* 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible)
* 1.0.7 1 10007 (still compatible)
* 1.0.8beta1-4 1 10008 2.1.0.8beta1-4
* 1.0.8rc1 1 10008 2.1.0.8rc1
* 1.0.8 1 10008 2.1.0.8
* 1.0.9beta1-6 1 10009 2.1.0.9beta1-6
* 1.0.9rc1 1 10009 2.1.0.9rc1
* 1.0.9beta7-10 1 10009 2.1.0.9beta7-10
* 1.0.9rc2 1 10009 2.1.0.9rc2
* 1.0.9 1 10009 2.1.0.9
* 1.0.10beta1 1 10010 2.1.0.10beta1
* 1.0.10rc1 1 10010 2.1.0.10rc1
* 1.0.10 1 10010 2.1.0.10
* 1.0.11beta1-3 1 10011 2.1.0.11beta1-3
* 1.0.11rc1 1 10011 2.1.0.11rc1
* 1.0.11 1 10011 2.1.0.11
* 1.0.12beta1-2 2 10012 2.1.0.12beta1-2
* 1.0.12rc1 2 10012 2.1.0.12rc1
* 1.0.12 2 10012 2.1.0.12
* 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned)
* 1.2.0beta1-2 2 10200 2.1.2.0beta1-2
* 1.2.0beta3-5 3 10200 3.1.2.0beta3-5
* 1.2.0rc1 3 10200 3.1.2.0rc1
* 1.2.0 3 10200 3.1.2.0
* 1.2.1beta1-4 3 10201 3.1.2.1beta1-4
* 1.2.1rc1-2 3 10201 3.1.2.1rc1-2
* 1.2.1 3 10201 3.1.2.1
* 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6
* 1.0.13beta1 10 10013 10.so.0.1.0.13beta1
* 1.0.13rc1 10 10013 10.so.0.1.0.13rc1
* 1.2.2rc1 12 10202 12.so.0.1.2.2rc1
* 1.0.13 10 10013 10.so.0.1.0.13
* 1.2.2 12 10202 12.so.0.1.2.2
* 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6
* 1.2.3 12 10203 12.so.0.1.2.3
* 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3
* 1.0.14rc1 13 10014 10.so.0.1.0.14rc1
* 1.2.4rc1 13 10204 12.so.0.1.2.4rc1
* 1.0.14 10 10014 10.so.0.1.0.14
* 1.2.4 13 10204 12.so.0.1.2.4
* 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2
* 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3
* 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3
* 1.0.15 10 10015 10.so.0.1.0.15
* 1.2.5 13 10205 12.so.0.1.2.5
* 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4
* 1.0.16 10 10016 10.so.0.1.0.16
* 1.2.6 13 10206 12.so.0.1.2.6
* 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2
* 1.0.17rc1 10 10017 12.so.0.1.0.17rc1
* 1.2.7rc1 13 10207 12.so.0.1.2.7rc1
* 1.0.17 10 10017 12.so.0.1.0.17
* 1.2.7 13 10207 12.so.0.1.2.7
* 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5
* 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5
* 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5
* 1.0.18 10 10018 12.so.0.1.0.18
* 1.2.8 13 10208 12.so.0.1.2.8
* 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3
* 1.2.9beta4-11 13 10209 12.so.0.9[.0]
* 1.2.9rc1 13 10209 12.so.0.9[.0]
* 1.2.9 13 10209 12.so.0.9[.0]
* 1.2.10beta1-7 13 10210 12.so.0.10[.0]
* 1.2.10rc1-2 13 10210 12.so.0.10[.0]
* 1.2.10 13 10210 12.so.0.10[.0]
* 1.4.0beta1-5 14 10400 14.so.0.0[.0]
* 1.2.11beta1-4 13 10211 12.so.0.11[.0]
* 1.4.0beta7-8 14 10400 14.so.0.0[.0]
* 1.2.11 13 10211 12.so.0.11[.0]
* 1.2.12 13 10212 12.so.0.12[.0]
* 1.4.0beta9-14 14 10400 14.so.0.0[.0]
* 1.2.13 13 10213 12.so.0.13[.0]
* 1.4.0beta15-36 14 10400 14.so.0.0[.0]
* 1.4.0beta37-87 14 10400 14.so.14.0[.0]
* 1.4.0rc01 14 10400 14.so.14.0[.0]
* 1.4.0beta88-109 14 10400 14.so.14.0[.0]
* 1.4.0rc02-08 14 10400 14.so.14.0[.0]
* 1.4.0 14 10400 14.so.14.0[.0]
* 1.4.1beta01-03 14 10401 14.so.14.1[.0]
* 1.4.1rc01 14 10401 14.so.14.1[.0]
* 1.4.1beta04-12 14 10401 14.so.14.1[.0]
* 1.4.1 14 10401 14.so.14.1[.0]
* 1.4.2 14 10402 14.so.14.2[.0]
* 1.4.3 14 10403 14.so.14.3[.0]
* 1.4.4 14 10404 14.so.14.4[.0]
* 1.5.0beta01-58 15 10500 15.so.15.0[.0]
* 1.5.0rc01-07 15 10500 15.so.15.0[.0]
* 1.5.0 15 10500 15.so.15.0[.0]
* 1.5.1beta01-11 15 10501 15.so.15.1[.0]
* 1.5.1rc01-02 15 10501 15.so.15.1[.0]
* 1.5.1 15 10501 15.so.15.1[.0]
* 1.5.2beta01-03 15 10502 15.so.15.2[.0]
* 1.5.2rc01-03 15 10502 15.so.15.2[.0]
* 1.5.2 15 10502 15.so.15.2[.0]
* 1.5.3beta01-10 15 10503 15.so.15.3[.0]
* 1.5.3rc01-02 15 10503 15.so.15.3[.0]
* 1.5.3beta11 15 10503 15.so.15.3[.0]
* 1.5.3 [omitted]
* 1.5.4beta01-08 15 10504 15.so.15.4[.0]
* 1.5.4rc01 15 10504 15.so.15.4[.0]
* 1.5.4 15 10504 15.so.15.4[.0]
* 1.5.5beta01-08 15 10505 15.so.15.5[.0]
* 1.5.5rc01 15 10505 15.so.15.5[.0]
* 1.5.5 15 10505 15.so.15.5[.0]
* 1.5.6beta01-07 15 10506 15.so.15.6[.0]
* 1.5.6rc01-03 15 10506 15.so.15.6[.0]
* 1.5.6 15 10506 15.so.15.6[.0]
* 1.5.7beta01-05 15 10507 15.so.15.7[.0]
* 1.5.7rc01-03 15 10507 15.so.15.7[.0]
* 1.5.7 15 10507 15.so.15.7[.0]
* 1.6.0beta01-40 16 10600 16.so.16.0[.0]
* 1.6.0rc01-08 16 10600 16.so.16.0[.0]
* 1.6.0 16 10600 16.so.16.0[.0]
* 1.6.1beta01-09 16 10601 16.so.16.1[.0]
* 1.6.1rc01 16 10601 16.so.16.1[.0]
* 1.6.1 16 10601 16.so.16.1[.0]
* 1.6.2beta01 16 10602 16.so.16.2[.0]
* 1.6.2rc01-03 16 10602 16.so.16.2[.0]
*
* Henceforth the source version will match the shared-library major
* and minor numbers; the shared-library major version number will be
* used for changes in backward compatibility, as it is intended. The
* PNG_LIBPNG_VER macro, which is not used within libpng but is available
* for applications, is an unsigned integer of the form xyyzz corresponding
* to the source version x.y.z (leading zeros in y and z). Beta versions
* were given the previous public release number plus a letter, until
* version 1.0.6j; from then on they were given the upcoming public
* release number plus "betaNN" or "rcNN".
*
* Binary incompatibility exists only when applications make direct access
* to the info_ptr or png_ptr members through png.h, and the compiled
* application is loaded with a different version of the library.
*
* DLLNUM will change each time there are forward or backward changes
* in binary compatibility (e.g., when a new feature is added).
*
* See libpng-manual.txt or libpng.3 for more information. The PNG
* specification is available as a W3C Recommendation and as an ISO
* Specification, <http://www.w3.org/TR/2003/REC-PNG-20031110/
*/
/*
* COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
*
* If you modify libpng you may insert additional notices immediately following
* this sentence.
*
* This code is released under the libpng license.
*
* libpng versions 1.2.6, August 15, 2004, through 1.6.2rc03, April 19, 2013, are
* Copyright (c) 2004, 2006-2013 Glenn Randers-Pehrson, and are
* distributed according to the same disclaimer and license as libpng-1.2.5
* with the following individual added to the list of Contributing Authors:
*
* Cosmin Truta
*
* libpng versions 1.0.7, July 1, 2000, through 1.2.5, October 3, 2002, are
* Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are
* distributed according to the same disclaimer and license as libpng-1.0.6
* with the following individuals added to the list of Contributing Authors:
*
* Simon-Pierre Cadieux
* Eric S. Raymond
* Gilles Vollant
*
* and with the following additions to the disclaimer:
*
* There is no warranty against interference with your enjoyment of the
* library or against infringement. There is no warranty that our
* efforts or the library will fulfill any of your particular purposes
* or needs. This library is provided with all faults, and the entire
* risk of satisfactory quality, performance, accuracy, and effort is with
* the user.
*
* libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are
* Copyright (c) 1998, 1999, 2000 Glenn Randers-Pehrson, and are
* distributed according to the same disclaimer and license as libpng-0.96,
* with the following individuals added to the list of Contributing Authors:
*
* Tom Lane
* Glenn Randers-Pehrson
* Willem van Schaik
*
* libpng versions 0.89, June 1996, through 0.96, May 1997, are
* Copyright (c) 1996, 1997 Andreas Dilger
* Distributed according to the same disclaimer and license as libpng-0.88,
* with the following individuals added to the list of Contributing Authors:
*
* John Bowler
* Kevin Bracey
* Sam Bushell
* Magnus Holmgren
* Greg Roelofs
* Tom Tanner
*
* libpng versions 0.5, May 1995, through 0.88, January 1996, are
* Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
*
* For the purposes of this copyright and license, "Contributing Authors"
* is defined as the following set of individuals:
*
* Andreas Dilger
* Dave Martindale
* Guy Eric Schalnat
* Paul Schmidt
* Tim Wegner
*
* The PNG Reference Library is supplied "AS IS". The Contributing Authors
* and Group 42, Inc. disclaim all warranties, expressed or implied,
* including, without limitation, the warranties of merchantability and of
* fitness for any purpose. The Contributing Authors and Group 42, Inc.
* assume no liability for direct, indirect, incidental, special, exemplary,
* or consequential damages, which may result from the use of the PNG
* Reference Library, even if advised of the possibility of such damage.
*
* Permission is hereby granted to use, copy, modify, and distribute this
* source code, or portions hereof, for any purpose, without fee, subject
* to the following restrictions:
*
* 1. The origin of this source code must not be misrepresented.
*
* 2. Altered versions must be plainly marked as such and must not
* be misrepresented as being the original source.
*
* 3. This Copyright notice may not be removed or altered from
* any source or altered source distribution.
*
* The Contributing Authors and Group 42, Inc. specifically permit, without
* fee, and encourage the use of this source code as a component to
* supporting the PNG file format in commercial products. If you use this
* source code in a product, acknowledgment is not required but would be
* appreciated.
*/
/*
* A "png_get_copyright" function is available, for convenient use in "about"
* boxes and the like:
*
* printf("%s", png_get_copyright(NULL));
*
* Also, the PNG logo (in PNG format, of course) is supplied in the
* files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
*/
/*
* Libpng is OSI Certified Open Source Software. OSI Certified is a
* certification mark of the Open Source Initiative.
*/
/*
* The contributing authors would like to thank all those who helped
* with testing, bug fixes, and patience. This wouldn't have been
* possible without all of you.
*
* Thanks to Frank J. T. Wojcik for helping with the documentation.
*/
/*
* Y2K compliance in libpng:
* =========================
*
* April 19, 2013
*
* Since the PNG Development group is an ad-hoc body, we can't make
* an official declaration.
*
* This is your unofficial assurance that libpng from version 0.71 and
* upward through 1.6.2rc03 are Y2K compliant. It is my belief that
* earlier versions were also Y2K compliant.
*
* Libpng only has two year fields. One is a 2-byte unsigned integer
* that will hold years up to 65535. The other, which is deprecated,
* holds the date in text format, and will hold years up to 9999.
*
* The integer is
* "png_uint_16 year" in png_time_struct.
*
* The string is
* "char time_buffer[29]" in png_struct. This is no longer used
* in libpng-1.6.x and will be removed from libpng-1.7.0.
*
* There are seven time-related functions:
* png.c: png_convert_to_rfc_1123_buffer() in png.c
* (formerly png_convert_to_rfc_1123() prior to libpng-1.5.x and
* png_convert_to_rfc_1152() in error prior to libpng-0.98)
* png_convert_from_struct_tm() in pngwrite.c, called in pngwrite.c
* png_convert_from_time_t() in pngwrite.c
* png_get_tIME() in pngget.c
* png_handle_tIME() in pngrutil.c, called in pngread.c
* png_set_tIME() in pngset.c
* png_write_tIME() in pngwutil.c, called in pngwrite.c
*
* All handle dates properly in a Y2K environment. The
* png_convert_from_time_t() function calls gmtime() to convert from system
* clock time, which returns (year - 1900), which we properly convert to
* the full 4-digit year. There is a possibility that libpng applications
* are not passing 4-digit years into the png_convert_to_rfc_1123_buffer()
* function, or that they are incorrectly passing only a 2-digit year
* instead of "year - 1900" into the png_convert_from_struct_tm() function,
* but this is not under our control. The libpng documentation has always
* stated that it works with 4-digit years, and the APIs have been
* documented as such.
*
* The tIME chunk itself is also Y2K compliant. It uses a 2-byte unsigned
* integer to hold the year, and can hold years as large as 65535.
*
* zlib, upon which libpng depends, is also Y2K compliant. It contains
* no date-related code.
*
* Glenn Randers-Pehrson
* libpng maintainer
* PNG Development Group
*/
#ifndef PNG_H
#define PNG_H
/* This is not the place to learn how to use libpng. The file libpng-manual.txt
* describes how to use libpng, and the file example.c summarizes it
* with some code on which to build. This file is useful for looking
* at the actual function definitions and structure components.
*
* If you just need to read a PNG file and don't want to read the documentation
* skip to the end of this file and read the section entitled 'simplified API'.
*/
/* Version information for png.h - this should match the version in png.c */
#define PNG_LIBPNG_VER_STRING "1.6.2rc03"
#define PNG_HEADER_VERSION_STRING \
" libpng version 1.6.2rc03 - April 19, 2013\n"
#define PNG_LIBPNG_VER_SONUM 16
#define PNG_LIBPNG_VER_DLLNUM 16
/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */
#define PNG_LIBPNG_VER_MAJOR 1
#define PNG_LIBPNG_VER_MINOR 6
#define PNG_LIBPNG_VER_RELEASE 2
/* This should match the numeric part of the final component of
* PNG_LIBPNG_VER_STRING, omitting any leading zero:
*/
#define PNG_LIBPNG_VER_BUILD 03
/* Release Status */
#define PNG_LIBPNG_BUILD_ALPHA 1
#define PNG_LIBPNG_BUILD_BETA 2
#define PNG_LIBPNG_BUILD_RC 3
#define PNG_LIBPNG_BUILD_STABLE 4
#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7
/* Release-Specific Flags */
#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with
PNG_LIBPNG_BUILD_STABLE only */
#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with
PNG_LIBPNG_BUILD_SPECIAL */
#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
PNG_LIBPNG_BUILD_PRIVATE */
#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_RC
/* Careful here. At one time, Guy wanted to use 082, but that would be octal.
* We must not include leading zeros.
* Versions 0.7 through 1.0.0 were in the range 0 to 100 here (only
* version 1.0.0 was mis-numbered 100 instead of 10000). From
* version 1.0.1 it's xxyyzz, where x=major, y=minor, z=release
*/
#define PNG_LIBPNG_VER 10602 /* 1.6.2 */
/* Library configuration: these options cannot be changed after
* the library has been built.
*/
#ifndef PNGLCONF_H
/* If pnglibconf.h is missing, you can
* copy scripts/pnglibconf.h.prebuilt to pnglibconf.h
*/
# include "pnglibconf.h"
#endif
#ifndef PNG_VERSION_INFO_ONLY
/* Machine specific configuration. */
# include "pngconf.h"
#endif
/*
* Added at libpng-1.2.8
*
* Ref MSDN: Private as priority over Special
* VS_FF_PRIVATEBUILD File *was not* built using standard release
* procedures. If this value is given, the StringFileInfo block must
* contain a PrivateBuild string.
*
* VS_FF_SPECIALBUILD File *was* built by the original company using
* standard release procedures but is a variation of the standard
* file of the same version number. If this value is given, the
* StringFileInfo block must contain a SpecialBuild string.
*/
#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */
# define PNG_LIBPNG_BUILD_TYPE \
(PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE)
#else
# ifdef PNG_LIBPNG_SPECIALBUILD
# define PNG_LIBPNG_BUILD_TYPE \
(PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL)
# else
# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE)
# endif
#endif
#ifndef PNG_VERSION_INFO_ONLY
/* Inhibit C++ name-mangling for libpng functions but not for system calls. */
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* Version information for C files, stored in png.c. This had better match
* the version above.
*/
#define png_libpng_ver png_get_header_ver(NULL)
/* This file is arranged in several sections:
*
* 1. Any configuration options that can be specified by for the application
* code when it is built. (Build time configuration is in pnglibconf.h)
* 2. Type definitions (base types are defined in pngconf.h), structure
* definitions.
* 3. Exported library functions.
* 4. Simplified API.
*
* The library source code has additional files (principally pngpriv.h) that
* allow configuration of the library.
*/
/* Section 1: run time configuration
* See pnglibconf.h for build time configuration
*
* Run time configuration allows the application to choose between
* implementations of certain arithmetic APIs. The default is set
* at build time and recorded in pnglibconf.h, but it is safe to
* override these (and only these) settings. Note that this won't
* change what the library does, only application code, and the
* settings can (and probably should) be made on a per-file basis
* by setting the #defines before including png.h
*
* Use macros to read integers from PNG data or use the exported
* functions?
* PNG_USE_READ_MACROS: use the macros (see below) Note that
* the macros evaluate their argument multiple times.
* PNG_NO_USE_READ_MACROS: call the relevant library function.
*
* Use the alternative algorithm for compositing alpha samples that
* does not use division?
* PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division'
* algorithm.
* PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm.
*
* How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is
* false?
* PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error
* APIs to png_warning.
* Otherwise the calls are mapped to png_error.
*/
/* Section 2: type definitions, including structures and compile time
* constants.
* See pngconf.h for base types that vary by machine/system
*/
/* This triggers a compiler error in png.c, if png.c and png.h
* do not agree upon the version number.
*/
typedef char* png_libpng_version_1_6_2rc03;
/* Basic control structions. Read libpng-manual.txt or libpng.3 for more info.
*
* png_struct is the cache of information used while reading or writing a single
* PNG file. One of these is always required, although the simplified API
* (below) hides the creation and destruction of it.
*/
typedef struct png_struct_def png_struct;
typedef const png_struct * png_const_structp;
typedef png_struct * png_structp;
typedef png_struct * * png_structpp;
/* png_info contains information read from or to be written to a PNG file. One
* or more of these must exist while reading or creating a PNG file. The
* information is not used by libpng during read but is used to control what
* gets written when a PNG file is created. "png_get_" function calls read
* information during read and "png_set_" functions calls write information
* when creating a PNG.
* been moved into a separate header file that is not accessible to
* applications. Read libpng-manual.txt or libpng.3 for more info.
*/
typedef struct png_info_def png_info;
typedef png_info * png_infop;
typedef const png_info * png_const_infop;
typedef png_info * * png_infopp;
/* Types with names ending 'p' are pointer types. The corresponding types with
* names ending 'rp' are identical pointer types except that the pointer is
* marked 'restrict', which means that it is the only pointer to the object
* passed to the function. Applications should not use the 'restrict' types;
* it is always valid to pass 'p' to a pointer with a function argument of the
* corresponding 'rp' type. Different compilers have different rules with
* regard to type matching in the presence of 'restrict'. For backward
* compatibility libpng callbacks never have 'restrict' in their parameters and,
* consequentially, writing portable application code is extremely difficult if
* an attempt is made to use 'restrict'.
*/
typedef png_struct * PNG_RESTRICT png_structrp;
typedef const png_struct * PNG_RESTRICT png_const_structrp;
typedef png_info * PNG_RESTRICT png_inforp;
typedef const png_info * PNG_RESTRICT png_const_inforp;
/* Three color definitions. The order of the red, green, and blue, (and the
* exact size) is not important, although the size of the fields need to
* be png_byte or png_uint_16 (as defined below).
*/
typedef struct png_color_struct
{
png_byte red;
png_byte green;
png_byte blue;
} png_color;
typedef png_color * png_colorp;
typedef const png_color * png_const_colorp;
typedef png_color * * png_colorpp;
typedef struct png_color_16_struct
{
png_byte index; /* used for palette files */
png_uint_16 red; /* for use in red green blue files */
png_uint_16 green;
png_uint_16 blue;
png_uint_16 gray; /* for use in grayscale files */
} png_color_16;
typedef png_color_16 * png_color_16p;
typedef const png_color_16 * png_const_color_16p;
typedef png_color_16 * * png_color_16pp;
typedef struct png_color_8_struct
{
png_byte red; /* for use in red green blue files */
png_byte green;
png_byte blue;
png_byte gray; /* for use in grayscale files */
png_byte alpha; /* for alpha channel files */
} png_color_8;
typedef png_color_8 * png_color_8p;
typedef const png_color_8 * png_const_color_8p;
typedef png_color_8 * * png_color_8pp;
/*
* The following two structures are used for the in-core representation
* of sPLT chunks.
*/
typedef struct png_sPLT_entry_struct
{
png_uint_16 red;
png_uint_16 green;
png_uint_16 blue;
png_uint_16 alpha;
png_uint_16 frequency;
} png_sPLT_entry;
typedef png_sPLT_entry * png_sPLT_entryp;
typedef const png_sPLT_entry * png_const_sPLT_entryp;
typedef png_sPLT_entry * * png_sPLT_entrypp;
/* When the depth of the sPLT palette is 8 bits, the color and alpha samples
* occupy the LSB of their respective members, and the MSB of each member
* is zero-filled. The frequency member always occupies the full 16 bits.
*/
typedef struct png_sPLT_struct
{
png_charp name; /* palette name */
png_byte depth; /* depth of palette samples */
png_sPLT_entryp entries; /* palette entries */
png_int_32 nentries; /* number of palette entries */
} png_sPLT_t;
typedef png_sPLT_t * png_sPLT_tp;
typedef const png_sPLT_t * png_const_sPLT_tp;
typedef png_sPLT_t * * png_sPLT_tpp;
#ifdef PNG_TEXT_SUPPORTED
/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file,
* and whether that contents is compressed or not. The "key" field
* points to a regular zero-terminated C string. The "text" fields can be a
* regular C string, an empty string, or a NULL pointer.
* However, the structure returned by png_get_text() will always contain
* the "text" field as a regular zero-terminated C string (possibly
* empty), never a NULL pointer, so it can be safely used in printf() and
* other string-handling functions. Note that the "itxt_length", "lang", and
* "lang_key" members of the structure only exist when the library is built
* with iTXt chunk support. Prior to libpng-1.4.0 the library was built by
* default without iTXt support. Also note that when iTXt *is* supported,
* the "lang" and "lang_key" fields contain NULL pointers when the
* "compression" field contains * PNG_TEXT_COMPRESSION_NONE or
* PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the
* same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag"
* which is always 0 or 1, or its "compression method" which is always 0.
*/
typedef struct png_text_struct
{
int compression; /* compression value:
-1: tEXt, none
0: zTXt, deflate
1: iTXt, none
2: iTXt, deflate */
png_charp key; /* keyword, 1-79 character description of "text" */
png_charp text; /* comment, may be an empty string (ie "")
or a NULL pointer */
png_size_t text_length; /* length of the text string */
png_size_t itxt_length; /* length of the itxt string */
png_charp lang; /* language code, 0-79 characters
or a NULL pointer */
png_charp lang_key; /* keyword translated UTF-8 string, 0 or more
chars or a NULL pointer */
} png_text;
typedef png_text * png_textp;
typedef const png_text * png_const_textp;
typedef png_text * * png_textpp;
#endif
/* Supported compression types for text in PNG files (tEXt, and zTXt).
* The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */
#define PNG_TEXT_COMPRESSION_NONE_WR -3
#define PNG_TEXT_COMPRESSION_zTXt_WR -2
#define PNG_TEXT_COMPRESSION_NONE -1
#define PNG_TEXT_COMPRESSION_zTXt 0
#define PNG_ITXT_COMPRESSION_NONE 1
#define PNG_ITXT_COMPRESSION_zTXt 2
#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */
/* png_time is a way to hold the time in an machine independent way.
* Two conversions are provided, both from time_t and struct tm. There
* is no portable way to convert to either of these structures, as far
* as I know. If you know of a portable way, send it to me. As a side
* note - PNG has always been Year 2000 compliant!
*/
typedef struct png_time_struct
{
png_uint_16 year; /* full year, as in, 1995 */
png_byte month; /* month of year, 1 - 12 */
png_byte day; /* day of month, 1 - 31 */
png_byte hour; /* hour of day, 0 - 23 */
png_byte minute; /* minute of hour, 0 - 59 */
png_byte second; /* second of minute, 0 - 60 (for leap seconds) */
} png_time;
typedef png_time * png_timep;
typedef const png_time * png_const_timep;
typedef png_time * * png_timepp;
#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED
/* png_unknown_chunk is a structure to hold queued chunks for which there is
* no specific support. The idea is that we can use this to queue
* up private chunks for output even though the library doesn't actually
* know about their semantics.
*
* The data in the structure is set by libpng on read and used on write.
*/
typedef struct png_unknown_chunk_t
{
png_byte name[5]; /* Textual chunk name with '\0' terminator */
png_byte *data; /* Data, should not be modified on read! */
png_size_t size;
/* On write 'location' must be set using the flag values listed below.
* Notice that on read it is set by libpng however the values stored have
* more bits set than are listed below. Always treat the value as a
* bitmask. On write set only one bit - setting multiple bits may cause the
* chunk to be written in multiple places.
*/
png_byte location; /* mode of operation at read time */
}
png_unknown_chunk;
typedef png_unknown_chunk * png_unknown_chunkp;
typedef const png_unknown_chunk * png_const_unknown_chunkp;
typedef png_unknown_chunk * * png_unknown_chunkpp;
#endif
/* Flag values for the unknown chunk location byte. */
#define PNG_HAVE_IHDR 0x01
#define PNG_HAVE_PLTE 0x02
#define PNG_AFTER_IDAT 0x08
/* Maximum positive integer used in PNG is (2^31)-1 */
#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL)
#define PNG_UINT_32_MAX ((png_uint_32)(-1))
#define PNG_SIZE_MAX ((png_size_t)(-1))
/* These are constants for fixed point values encoded in the
* PNG specification manner (x100000)
*/
#define PNG_FP_1 100000
#define PNG_FP_HALF 50000
#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL)
#define PNG_FP_MIN (-PNG_FP_MAX)
/* These describe the color_type field in png_info. */
/* color type masks */
#define PNG_COLOR_MASK_PALETTE 1
#define PNG_COLOR_MASK_COLOR 2
#define PNG_COLOR_MASK_ALPHA 4
/* color types. Note that not all combinations are legal */
#define PNG_COLOR_TYPE_GRAY 0
#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE)
#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR)
#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA)
#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA)
/* aliases */
#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA
#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA
/* This is for compression type. PNG 1.0-1.2 only define the single type. */
#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */
#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE
/* This is for filter type. PNG 1.0-1.2 only define the single type. */
#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */
#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */
#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE
/* These are for the interlacing type. These values should NOT be changed. */
#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */
#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */
#define PNG_INTERLACE_LAST 2 /* Not a valid value */
/* These are for the oFFs chunk. These values should NOT be changed. */
#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */
#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */
#define PNG_OFFSET_LAST 2 /* Not a valid value */
/* These are for the pCAL chunk. These values should NOT be changed. */
#define PNG_EQUATION_LINEAR 0 /* Linear transformation */
#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */
#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */
#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */
#define PNG_EQUATION_LAST 4 /* Not a valid value */
/* These are for the sCAL chunk. These values should NOT be changed. */
#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */
#define PNG_SCALE_METER 1 /* meters per pixel */
#define PNG_SCALE_RADIAN 2 /* radians per pixel */
#define PNG_SCALE_LAST 3 /* Not a valid value */
/* These are for the pHYs chunk. These values should NOT be changed. */
#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */
#define PNG_RESOLUTION_METER 1 /* pixels/meter */
#define PNG_RESOLUTION_LAST 2 /* Not a valid value */
/* These are for the sRGB chunk. These values should NOT be changed. */
#define PNG_sRGB_INTENT_PERCEPTUAL 0
#define PNG_sRGB_INTENT_RELATIVE 1
#define PNG_sRGB_INTENT_SATURATION 2
#define PNG_sRGB_INTENT_ABSOLUTE 3
#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */
/* This is for text chunks */
#define PNG_KEYWORD_MAX_LENGTH 79
/* Maximum number of entries in PLTE/sPLT/tRNS arrays */
#define PNG_MAX_PALETTE_LENGTH 256
/* These determine if an ancillary chunk's data has been successfully read
* from the PNG header, or if the application has filled in the corresponding
* data in the info_struct to be written into the output file. The values
* of the PNG_INFO_<chunk> defines should NOT be changed.
*/
#define PNG_INFO_gAMA 0x0001
#define PNG_INFO_sBIT 0x0002
#define PNG_INFO_cHRM 0x0004
#define PNG_INFO_PLTE 0x0008
#define PNG_INFO_tRNS 0x0010
#define PNG_INFO_bKGD 0x0020
#define PNG_INFO_hIST 0x0040
#define PNG_INFO_pHYs 0x0080
#define PNG_INFO_oFFs 0x0100
#define PNG_INFO_tIME 0x0200
#define PNG_INFO_pCAL 0x0400
#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */
#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */
#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */
#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */
#define PNG_INFO_IDAT 0x8000 /* ESR, 1.0.6 */
/* This is used for the transformation routines, as some of them
* change these values for the row. It also should enable using
* the routines for other purposes.
*/
typedef struct png_row_info_struct
{
png_uint_32 width; /* width of row */
png_size_t rowbytes; /* number of bytes in row */
png_byte color_type; /* color type of row */
png_byte bit_depth; /* bit depth of row */
png_byte channels; /* number of channels (1, 2, 3, or 4) */
png_byte pixel_depth; /* bits per pixel (depth * channels) */
} png_row_info;
typedef png_row_info * png_row_infop;
typedef png_row_info * * png_row_infopp;
/* These are the function types for the I/O functions and for the functions
* that allow the user to override the default I/O functions with his or her
* own. The png_error_ptr type should match that of user-supplied warning
* and error functions, while the png_rw_ptr type should match that of the
* user read/write data functions. Note that the 'write' function must not
* modify the buffer it is passed. The 'read' function, on the other hand, is
* expected to return the read data in the buffer.
*/
typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp));
typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t));
typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp));
typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32,
int));
typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32,
int));
#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop));
typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop));
/* The following callback receives png_uint_32 row_number, int pass for the
* png_bytep data of the row. When transforming an interlaced image the
* row number is the row number within the sub-image of the interlace pass, so
* the value will increase to the height of the sub-image (not the full image)
* then reset to 0 for the next pass.
*
* Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to
* find the output pixel (x,y) given an interlaced sub-image pixel
* (row,col,pass). (See below for these macros.)
*/
typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep,
png_uint_32, int));
#endif
#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \
defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED)
typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop,
png_bytep));
#endif
#ifdef PNG_USER_CHUNKS_SUPPORTED
typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp,
png_unknown_chunkp));
#endif
#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED
/* not used anywhere */
/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */
#endif
#ifdef PNG_SETJMP_SUPPORTED
/* This must match the function definition in <setjmp.h>, and the application
* must include this before png.h to obtain the definition of jmp_buf. The
* function is required to be PNG_NORETURN, but this is not checked. If the
* function does return the application will crash via an abort() or similar
* system level call.
*
* If you get a warning here while building the library you may need to make
* changes to ensure that pnglibconf.h records the calling convention used by
* your compiler. This may be very difficult - try using a different compiler
* to build the library!
*/
PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), typedef);
#endif
/* Transform masks for the high-level interface */
#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */
#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */
#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */
#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */
#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */
#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */
#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */
#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */
#define PNG_TRANSFORM_BGR 0x0080 /* read and write */
#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */
#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */
#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */
#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */
/* Added to libpng-1.2.34 */
#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER
#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */
/* Added to libpng-1.4.0 */
#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */
/* Added to libpng-1.5.4 */
#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */
#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */
/* Flags for MNG supported features */
#define PNG_FLAG_MNG_EMPTY_PLTE 0x01
#define PNG_FLAG_MNG_FILTER_64 0x04
#define PNG_ALL_MNG_FEATURES 0x05
/* NOTE: prior to 1.5 these functions had no 'API' style declaration,
* this allowed the zlib default functions to be used on Windows
* platforms. In 1.5 the zlib default malloc (which just calls malloc and
* ignores the first argument) should be completely compatible with the
* following.
*/
typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp,
png_alloc_size_t));
typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp));
/* Section 3: exported functions
* Here are the function definitions most commonly used. This is not
* the place to find out how to use libpng. See libpng-manual.txt for the
* full explanation, see example.c for the summary. This just provides
* a simple one line description of the use of each function.
*
* The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in
* pngconf.h and in the *.dfn files in the scripts directory.
*
* PNG_EXPORT(ordinal, type, name, (args));
*
* ordinal: ordinal that is used while building
* *.def files. The ordinal value is only
* relevant when preprocessing png.h with
* the *.dfn files for building symbol table
* entries, and are removed by pngconf.h.
* type: return type of the function
* name: function name
* args: function arguments, with types
*
* When we wish to append attributes to a function prototype we use
* the PNG_EXPORTA() macro instead.
*
* PNG_EXPORTA(ordinal, type, name, (args), attributes);
*
* ordinal, type, name, and args: same as in PNG_EXPORT().
* attributes: function attributes
*/
/* Returns the version number of the library */
PNG_EXPORT(1, png_uint_32, png_access_version_number, (void));
/* Tell lib we have already handled the first <num_bytes> magic bytes.
* Handling more than 8 bytes from the beginning of the file is an error.
*/
PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes));
/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a
* PNG file. Returns zero if the supplied bytes match the 8-byte PNG
* signature, and non-zero otherwise. Having num_to_check == 0 or
* start > 7 will always fail (ie return non-zero).
*/
PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start,
png_size_t num_to_check));
/* Simple signature checking function. This is the same as calling
* png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n).
*/
#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n))
/* Allocate and initialize png_ptr struct for reading, and any other memory. */
PNG_EXPORTA(4, png_structp, png_create_read_struct,
(png_const_charp user_png_ver, png_voidp error_ptr,
png_error_ptr error_fn, png_error_ptr warn_fn),
PNG_ALLOCATED);
/* Allocate and initialize png_ptr struct for writing, and any other memory */
PNG_EXPORTA(5, png_structp, png_create_write_struct,
(png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
png_error_ptr warn_fn),
PNG_ALLOCATED);
PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size,
(png_const_structrp png_ptr));
PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr,
png_size_t size));
/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp
* match up.
*/
#ifdef PNG_SETJMP_SUPPORTED
/* This function returns the jmp_buf built in to *png_ptr. It must be
* supplied with an appropriate 'longjmp' function to use on that jmp_buf
* unless the default error function is overridden in which case NULL is
* acceptable. The size of the jmp_buf is checked against the actual size
* allocated by the library - the call will return NULL on a mismatch
* indicating an ABI mismatch.
*/
PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr,
png_longjmp_ptr longjmp_fn, size_t jmp_buf_size));
# define png_jmpbuf(png_ptr) \
(*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf))))
#else
# define png_jmpbuf(png_ptr) \
(LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP)
#endif
/* This function should be used by libpng applications in place of
* longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it
* will use it; otherwise it will call PNG_ABORT(). This function was
* added in libpng-1.5.0.
*/
PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val),
PNG_NORETURN);
#ifdef PNG_READ_SUPPORTED
/* Reset the compression stream */
PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED);
#endif
/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */
#ifdef PNG_USER_MEM_SUPPORTED
PNG_EXPORTA(11, png_structp, png_create_read_struct_2,
(png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
png_error_ptr warn_fn,
png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn),
PNG_ALLOCATED);
PNG_EXPORTA(12, png_structp, png_create_write_struct_2,
(png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
png_error_ptr warn_fn,
png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn),
PNG_ALLOCATED);
#endif
/* Write the PNG file signature. */
PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr));
/* Write a PNG chunk - size, type, (optional) data, CRC. */
PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep
chunk_name, png_const_bytep data, png_size_t length));
/* Write the start of a PNG chunk - length and chunk name. */
PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr,
png_const_bytep chunk_name, png_uint_32 length));
/* Write the data of a PNG chunk started with png_write_chunk_start(). */
PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr,
png_const_bytep data, png_size_t length));
/* Finish a chunk started with png_write_chunk_start() (includes CRC). */
PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr));
/* Allocate and initialize the info structure */
PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr),
PNG_ALLOCATED);
/* DEPRECATED: this function allowed init structures to be created using the
* default allocation method (typically malloc). Use is deprecated in 1.6.0 and
* the API will be removed in the future.
*/
PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr,
png_size_t png_info_struct_size), PNG_DEPRECATED);
/* Writes all the PNG information before the image. */
PNG_EXPORT(20, void, png_write_info_before_PLTE,
(png_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(21, void, png_write_info,
(png_structrp png_ptr, png_const_inforp info_ptr));
#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
/* Read the information before the actual image data. */
PNG_EXPORT(22, void, png_read_info,
(png_structrp png_ptr, png_inforp info_ptr));
#endif
#ifdef PNG_TIME_RFC1123_SUPPORTED
/* Convert to a US string format: there is no localization support in this
* routine. The original implementation used a 29 character buffer in
* png_struct, this will be removed in future versions.
*/
#if PNG_LIBPNG_VER < 10700
/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */
PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr,
png_const_timep ptime),PNG_DEPRECATED);
#endif
PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29],
png_const_timep ptime));
#endif
#ifdef PNG_CONVERT_tIME_SUPPORTED
/* Convert from a struct tm to png_time */
PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime,
const struct tm * ttime));
/* Convert from time_t to png_time. Uses gmtime() */
PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime));
#endif /* PNG_CONVERT_tIME_SUPPORTED */
#ifdef PNG_READ_EXPAND_SUPPORTED
/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */
PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr));
PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr));
PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr));
PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr));
#endif
#ifdef PNG_READ_EXPAND_16_SUPPORTED
/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion
* of a tRNS chunk if present.
*/
PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED)
/* Use blue, green, red order for pixels. */
PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr));
#endif
#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED
/* Expand the grayscale to 24-bit RGB if necessary. */
PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr));
#endif
#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED
/* Reduce RGB to grayscale. */
#define PNG_ERROR_ACTION_NONE 1
#define PNG_ERROR_ACTION_WARN 2
#define PNG_ERROR_ACTION_ERROR 3
#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/
PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr,
int error_action, double red, double green))
PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr,
int error_action, png_fixed_point red, png_fixed_point green))
PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp
png_ptr));
#endif
#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED
PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth,
png_colorp palette));
#endif
#ifdef PNG_READ_ALPHA_MODE_SUPPORTED
/* How the alpha channel is interpreted - this affects how the color channels of
* a PNG file are returned when an alpha channel, or tRNS chunk in a palette
* file, is present.
*
* This has no effect on the way pixels are written into a PNG output
* datastream. The color samples in a PNG datastream are never premultiplied
* with the alpha samples.
*
* The default is to return data according to the PNG specification: the alpha
* channel is a linear measure of the contribution of the pixel to the
* corresponding composited pixel. The gamma encoded color channels must be
* scaled according to the contribution and to do this it is necessary to undo
* the encoding, scale the color values, perform the composition and reencode
* the values. This is the 'PNG' mode.
*
* The alternative is to 'associate' the alpha with the color information by
* storing color channel values that have been scaled by the alpha. The
* advantage is that the color channels can be resampled (the image can be
* scaled) in this form. The disadvantage is that normal practice is to store
* linear, not (gamma) encoded, values and this requires 16-bit channels for
* still images rather than the 8-bit channels that are just about sufficient if
* gamma encoding is used. In addition all non-transparent pixel values,
* including completely opaque ones, must be gamma encoded to produce the final
* image. This is the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' mode (the
* latter being the two common names for associated alpha color channels.)
*
* Since it is not necessary to perform arithmetic on opaque color values so
* long as they are not to be resampled and are in the final color space it is
* possible to optimize the handling of alpha by storing the opaque pixels in
* the PNG format (adjusted for the output color space) while storing partially
* opaque pixels in the standard, linear, format. The accuracy required for
* standard alpha composition is relatively low, because the pixels are
* isolated, therefore typically the accuracy loss in storing 8-bit linear
* values is acceptable. (This is not true if the alpha channel is used to
* simulate transparency over large areas - use 16 bits or the PNG mode in
* this case!) This is the 'OPTIMIZED' mode. For this mode a pixel is
* treated as opaque only if the alpha value is equal to the maximum value.
*
* The final choice is to gamma encode the alpha channel as well. This is
* broken because, in practice, no implementation that uses this choice
* correctly undoes the encoding before handling alpha composition. Use this
* choice only if other serious errors in the software or hardware you use
* mandate it; the typical serious error is for dark halos to appear around
* opaque areas of the composited PNG image because of arithmetic overflow.
*
* The API function png_set_alpha_mode specifies which of these choices to use
* with an enumerated 'mode' value and the gamma of the required output:
*/
#define PNG_ALPHA_PNG 0 /* according to the PNG standard */
#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */
#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */
#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */
#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */
#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */
PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode,
double output_gamma))
PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr,
int mode, png_fixed_point output_gamma))
#endif
#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED)
/* The output_gamma value is a screen gamma in libpng terminology: it expresses
* how to decode the output values, not how they are encoded. The values used
* correspond to the normal numbers used to describe the overall gamma of a
* computer display system; for example 2.2 for an sRGB conformant system. The
* values are scaled by 100000 in the _fixed version of the API (so 220000 for
* sRGB.)
*
* The inverse of the value is always used to provide a default for the PNG file
* encoding if it has no gAMA chunk and if png_set_gamma() has not been called
* to override the PNG gamma information.
*
* When the ALPHA_OPTIMIZED mode is selected the output gamma is used to encode
* opaque pixels however pixels with lower alpha values are not encoded,
* regardless of the output gamma setting.
*
* When the standard Porter Duff handling is requested with mode 1 the output
* encoding is set to be linear and the output_gamma value is only relevant
* as a default for input data that has no gamma information. The linear output
* encoding will be overridden if png_set_gamma() is called - the results may be
* highly unexpected!
*
* The following numbers are derived from the sRGB standard and the research
* behind it. sRGB is defined to be approximated by a PNG gAMA chunk value of
* 0.45455 (1/2.2) for PNG. The value implicitly includes any viewing
* correction required to take account of any differences in the color
* environment of the original scene and the intended display environment; the
* value expresses how to *decode* the image for display, not how the original
* data was *encoded*.
*
* sRGB provides a peg for the PNG standard by defining a viewing environment.
* sRGB itself, and earlier TV standards, actually use a more complex transform
* (a linear portion then a gamma 2.4 power law) than PNG can express. (PNG is
* limited to simple power laws.) By saying that an image for direct display on
* an sRGB conformant system should be stored with a gAMA chunk value of 45455
* (11.3.3.2 and 11.3.3.5 of the ISO PNG specification) the PNG specification
* makes it possible to derive values for other display systems and
* environments.
*
* The Mac value is deduced from the sRGB based on an assumption that the actual
* extra viewing correction used in early Mac display systems was implemented as
* a power 1.45 lookup table.
*
* Any system where a programmable lookup table is used or where the behavior of
* the final display device characteristics can be changed requires system
* specific code to obtain the current characteristic. However this can be
* difficult and most PNG gamma correction only requires an approximate value.
*
* By default, if png_set_alpha_mode() is not called, libpng assumes that all
* values are unencoded, linear, values and that the output device also has a
* linear characteristic. This is only very rarely correct - it is invariably
* better to call png_set_alpha_mode() with PNG_DEFAULT_sRGB than rely on the
* default if you don't know what the right answer is!
*
* The special value PNG_GAMMA_MAC_18 indicates an older Mac system (pre Mac OS
* 10.6) which used a correction table to implement a somewhat lower gamma on an
* otherwise sRGB system.
*
* Both these values are reserved (not simple gamma values) in order to allow
* more precise correction internally in the future.
*
* NOTE: the following values can be passed to either the fixed or floating
* point APIs, but the floating point API will also accept floating point
* values.
*/
#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */
#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */
#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */
#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */
#endif
/* The following are examples of calls to png_set_alpha_mode to achieve the
* required overall gamma correction and, where necessary, alpha
* premultiplication.
*
* png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB);
* This is the default libpng handling of the alpha channel - it is not
* pre-multiplied into the color components. In addition the call states
* that the output is for a sRGB system and causes all PNG files without gAMA
* chunks to be assumed to be encoded using sRGB.
*
* png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
* In this case the output is assumed to be something like an sRGB conformant
* display preceeded by a power-law lookup table of power 1.45. This is how
* early Mac systems behaved.
*
* png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR);
* This is the classic Jim Blinn approach and will work in academic
* environments where everything is done by the book. It has the shortcoming
* of assuming that input PNG data with no gamma information is linear - this
* is unlikely to be correct unless the PNG files where generated locally.
* Most of the time the output precision will be so low as to show
* significant banding in dark areas of the image.
*
* png_set_expand_16(pp);
* png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB);
* This is a somewhat more realistic Jim Blinn inspired approach. PNG files
* are assumed to have the sRGB encoding if not marked with a gamma value and
* the output is always 16 bits per component. This permits accurate scaling
* and processing of the data. If you know that your input PNG files were
* generated locally you might need to replace PNG_DEFAULT_sRGB with the
* correct value for your system.
*
* png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB);
* If you just need to composite the PNG image onto an existing background
* and if you control the code that does this you can use the optimization
* setting. In this case you just copy completely opaque pixels to the
* output. For pixels that are not completely transparent (you just skip
* those) you do the composition math using png_composite or png_composite_16
* below then encode the resultant 8-bit or 16-bit values to match the output
* encoding.
*
* Other cases
* If neither the PNG nor the standard linear encoding work for you because
* of the software or hardware you use then you have a big problem. The PNG
* case will probably result in halos around the image. The linear encoding
* will probably result in a washed out, too bright, image (it's actually too
* contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably
* substantially reduce the halos. Alternatively try:
*
* png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB);
* This option will also reduce the halos, but there will be slight dark
* halos round the opaque parts of the image where the background is light.
* In the OPTIMIZED mode the halos will be light halos where the background
* is dark. Take your pick - the halos are unavoidable unless you can get
* your hardware/software fixed! (The OPTIMIZED approach is slightly
* faster.)
*
* When the default gamma of PNG files doesn't match the output gamma.
* If you have PNG files with no gamma information png_set_alpha_mode allows
* you to provide a default gamma, but it also sets the ouput gamma to the
* matching value. If you know your PNG files have a gamma that doesn't
* match the output you can take advantage of the fact that
* png_set_alpha_mode always sets the output gamma but only sets the PNG
* default if it is not already set:
*
* png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB);
* png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
* The first call sets both the default and the output gamma values, the
* second call overrides the output gamma without changing the default. This
* is easier than achieving the same effect with png_set_gamma. You must use
* PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will
* fire if more than one call to png_set_alpha_mode and png_set_background is
* made in the same read operation, however multiple calls with PNG_ALPHA_PNG
* are ignored.
*/
#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED
PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \
defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED)
PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \
defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED)
PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED)
/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */
PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler,
int flags));
/* The values of the PNG_FILLER_ defines should NOT be changed */
# define PNG_FILLER_BEFORE 0
# define PNG_FILLER_AFTER 1
/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */
PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr,
png_uint_32 filler, int flags));
#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */
#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED)
/* Swap bytes in 16-bit depth files. */
PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED)
/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */
PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \
defined(PNG_WRITE_PACKSWAP_SUPPORTED)
/* Swap packing order of pixels in bytes. */
PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED)
/* Converts files to legal bit depths. */
PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p
true_bits));
#endif
#if defined(PNG_READ_INTERLACING_SUPPORTED) || \
defined(PNG_WRITE_INTERLACING_SUPPORTED)
/* Have the code handle the interlacing. Returns the number of passes.
* MUST be called before png_read_update_info or png_start_read_image,
* otherwise it will not have the desired effect. Note that it is still
* necessary to call png_read_row or png_read_rows png_get_image_height
* times for each pass.
*/
PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr));
#endif
#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED)
/* Invert monochrome files */
PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr));
#endif
#ifdef PNG_READ_BACKGROUND_SUPPORTED
/* Handle alpha and tRNS by replacing with a background color. Prior to
* libpng-1.5.4 this API must not be called before the PNG file header has been
* read. Doing so will result in unexpected behavior and possible warnings or
* errors if the PNG file contains a bKGD chunk.
*/
PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr,
png_const_color_16p background_color, int background_gamma_code,
int need_expand, double background_gamma))
PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr,
png_const_color_16p background_color, int background_gamma_code,
int need_expand, png_fixed_point background_gamma))
#endif
#ifdef PNG_READ_BACKGROUND_SUPPORTED
# define PNG_BACKGROUND_GAMMA_UNKNOWN 0
# define PNG_BACKGROUND_GAMMA_SCREEN 1
# define PNG_BACKGROUND_GAMMA_FILE 2
# define PNG_BACKGROUND_GAMMA_UNIQUE 3
#endif
#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED
/* Scale a 16-bit depth file down to 8-bit, accurately. */
PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr));
#endif
#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED
#define PNG_READ_16_TO_8 SUPPORTED /* Name prior to 1.5.4 */
/* Strip the second byte of information from a 16-bit depth file. */
PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr));
#endif
#ifdef PNG_READ_QUANTIZE_SUPPORTED
/* Turn on quantizing, and reduce the palette to the number of colors
* available.
*/
PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr,
png_colorp palette, int num_palette, int maximum_colors,
png_const_uint_16p histogram, int full_quantize));
#endif
#ifdef PNG_READ_GAMMA_SUPPORTED
/* The threshold on gamma processing is configurable but hard-wired into the
* library. The following is the floating point variant.
*/
#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001)
/* Handle gamma correction. Screen_gamma=(display_exponent).
* NOTE: this API simply sets the screen and file gamma values. It will
* therefore override the value for gamma in a PNG file if it is called after
* the file header has been read - use with care - call before reading the PNG
* file for best results!
*
* These routines accept the same gamma values as png_set_alpha_mode (described
* above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either
* API (floating point or fixed.) Notice, however, that the 'file_gamma' value
* is the inverse of a 'screen gamma' value.
*/
PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr,
double screen_gamma, double override_file_gamma))
PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr,
png_fixed_point screen_gamma, png_fixed_point override_file_gamma))
#endif
#ifdef PNG_WRITE_FLUSH_SUPPORTED
/* Set how many lines between output flushes - 0 for no flushing */
PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows));
/* Flush the current PNG output buffer */
PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr));
#endif
/* Optional update palette with requested transformations */
PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr));
/* Optional call to update the users info structure */
PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr,
png_inforp info_ptr));
#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
/* Read one or more rows of image data. */
PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row,
png_bytepp display_row, png_uint_32 num_rows));
#endif
#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
/* Read a row of data. */
PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row,
png_bytep display_row));
#endif
#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
/* Read the whole image into memory at once. */
PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image));
#endif
/* Write a row of image data */
PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr,
png_const_bytep row));
/* Write a few rows of image data: (*row) is not written; however, the type
* is declared as writeable to maintain compatibility with previous versions
* of libpng and to allow the 'display_row' array from read_rows to be passed
* unchanged to write_rows.
*/
PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row,
png_uint_32 num_rows));
/* Write the image data */
PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image));
/* Write the end of the PNG file. */
PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr,
png_inforp info_ptr));
#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
/* Read the end of the PNG file. */
PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr));
#endif
/* Free any memory associated with the png_info_struct */
PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr,
png_infopp info_ptr_ptr));
/* Free any memory associated with the png_struct and the png_info_structs */
PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr,
png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr));
/* Free any memory associated with the png_struct and the png_info_structs */
PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr,
png_infopp info_ptr_ptr));
/* Set the libpng method of handling chunk CRC errors */
PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action,
int ancil_action));
/* Values for png_set_crc_action() say how to handle CRC errors in
* ancillary and critical chunks, and whether to use the data contained
* therein. Note that it is impossible to "discard" data in a critical
* chunk. For versions prior to 0.90, the action was always error/quit,
* whereas in version 0.90 and later, the action for CRC errors in ancillary
* chunks is warn/discard. These values should NOT be changed.
*
* value action:critical action:ancillary
*/
#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */
#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */
#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */
#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */
#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */
#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */
/* These functions give the user control over the scan-line filtering in
* libpng and the compression methods used by zlib. These functions are
* mainly useful for testing, as the defaults should work with most users.
* Those users who are tight on memory or want faster performance at the
* expense of compression can modify them. See the compression library
* header file (zlib.h) for an explination of the compression functions.
*/
/* Set the filtering method(s) used by libpng. Currently, the only valid
* value for "method" is 0.
*/
PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method,
int filters));
/* Flags for png_set_filter() to say which filters to use. The flags
* are chosen so that they don't conflict with real filter types
* below, in case they are supplied instead of the #defined constants.
* These values should NOT be changed.
*/
#define PNG_NO_FILTERS 0x00
#define PNG_FILTER_NONE 0x08
#define PNG_FILTER_SUB 0x10
#define PNG_FILTER_UP 0x20
#define PNG_FILTER_AVG 0x40
#define PNG_FILTER_PAETH 0x80
#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \
PNG_FILTER_AVG | PNG_FILTER_PAETH)
/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now.
* These defines should NOT be changed.
*/
#define PNG_FILTER_VALUE_NONE 0
#define PNG_FILTER_VALUE_SUB 1
#define PNG_FILTER_VALUE_UP 2
#define PNG_FILTER_VALUE_AVG 3
#define PNG_FILTER_VALUE_PAETH 4
#define PNG_FILTER_VALUE_LAST 5
#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */
/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_
* defines, either the default (minimum-sum-of-absolute-differences), or
* the experimental method (weighted-minimum-sum-of-absolute-differences).
*
* Weights are factors >= 1.0, indicating how important it is to keep the
* filter type consistent between rows. Larger numbers mean the current
* filter is that many times as likely to be the same as the "num_weights"
* previous filters. This is cumulative for each previous row with a weight.
* There needs to be "num_weights" values in "filter_weights", or it can be
* NULL if the weights aren't being specified. Weights have no influence on
* the selection of the first row filter. Well chosen weights can (in theory)
* improve the compression for a given image.
*
* Costs are factors >= 1.0 indicating the relative decoding costs of a
* filter type. Higher costs indicate more decoding expense, and are
* therefore less likely to be selected over a filter with lower computational
* costs. There needs to be a value in "filter_costs" for each valid filter
* type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't
* setting the costs. Costs try to improve the speed of decompression without
* unduly increasing the compressed image size.
*
* A negative weight or cost indicates the default value is to be used, and
* values in the range [0.0, 1.0) indicate the value is to remain unchanged.
* The default values for both weights and costs are currently 1.0, but may
* change if good general weighting/cost heuristics can be found. If both
* the weights and costs are set to 1.0, this degenerates the WEIGHTED method
* to the UNWEIGHTED method, but with added encoding time/computation.
*/
PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr,
int heuristic_method, int num_weights, png_const_doublep filter_weights,
png_const_doublep filter_costs))
PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed,
(png_structrp png_ptr, int heuristic_method, int num_weights,
png_const_fixed_point_p filter_weights,
png_const_fixed_point_p filter_costs))
#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */
/* Heuristic used for row filter selection. These defines should NOT be
* changed.
*/
#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */
#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */
#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */
#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */
#ifdef PNG_WRITE_SUPPORTED
/* Set the library compression level. Currently, valid values range from
* 0 - 9, corresponding directly to the zlib compression levels 0 - 9
* (0 - no compression, 9 - "maximal" compression). Note that tests have
* shown that zlib compression levels 3-6 usually perform as well as level 9
* for PNG images, and do considerably fewer caclulations. In the future,
* these values may not correspond directly to the zlib compression levels.
*/
PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr,
int level));
PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr,
int mem_level));
PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr,
int strategy));
/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a
* smaller value of window_bits if it can do so safely.
*/
PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr,
int window_bits));
PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr,
int method));
#endif
#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED
/* Also set zlib parameters for compressing non-IDAT chunks */
PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr,
int level));
PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr,
int mem_level));
PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr,
int strategy));
/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a
* smaller value of window_bits if it can do so safely.
*/
PNG_EXPORT(225, void, png_set_text_compression_window_bits,
(png_structrp png_ptr, int window_bits));
PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr,
int method));
#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */
/* These next functions are called for input/output, memory, and error
* handling. They are in the file pngrio.c, pngwio.c, and pngerror.c,
* and call standard C I/O routines such as fread(), fwrite(), and
* fprintf(). These functions can be made to use other I/O routines
* at run time for those applications that need to handle I/O in a
* different manner by calling png_set_???_fn(). See libpng-manual.txt for
* more information.
*/
#ifdef PNG_STDIO_SUPPORTED
/* Initialize the input/output for the PNG file to the default functions. */
PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp));
#endif
/* Replace the (error and abort), and warning functions with user
* supplied functions. If no messages are to be printed you must still
* write and use replacement functions. The replacement error_fn should
* still do a longjmp to the last setjmp location if you are using this
* method of error handling. If error_fn or warning_fn is NULL, the
* default function will be used.
*/
PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr,
png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn));
/* Return the user pointer associated with the error functions */
PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr));
/* Replace the default data output functions with a user supplied one(s).
* If buffered output is not used, then output_flush_fn can be set to NULL.
* If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time
* output_flush_fn will be ignored (and thus can be NULL).
* It is probably a mistake to use NULL for output_flush_fn if
* write_data_fn is not also NULL unless you have built libpng with
* PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's
* default flush function, which uses the standard *FILE structure, will
* be used.
*/
PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr,
png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn));
/* Replace the default data input function with a user supplied one. */
PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr,
png_rw_ptr read_data_fn));
/* Return the user pointer associated with the I/O functions */
PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr));
PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr,
png_read_status_ptr read_row_fn));
PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr,
png_write_status_ptr write_row_fn));
#ifdef PNG_USER_MEM_SUPPORTED
/* Replace the default memory allocation functions with user supplied one(s). */
PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr,
png_malloc_ptr malloc_fn, png_free_ptr free_fn));
/* Return the user pointer associated with the memory functions */
PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr));
#endif
#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED
PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr,
png_user_transform_ptr read_user_transform_fn));
#endif
#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED
PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr,
png_user_transform_ptr write_user_transform_fn));
#endif
#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED
PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr,
png_voidp user_transform_ptr, int user_transform_depth,
int user_transform_channels));
/* Return the user pointer associated with the user transform functions */
PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr,
(png_const_structrp png_ptr));
#endif
#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED
/* Return information about the row currently being processed. Note that these
* APIs do not fail but will return unexpected results if called outside a user
* transform callback. Also note that when transforming an interlaced image the
* row number is the row number within the sub-image of the interlace pass, so
* the value will increase to the height of the sub-image (not the full image)
* then reset to 0 for the next pass.
*
* Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to
* find the output pixel (x,y) given an interlaced sub-image pixel
* (row,col,pass). (See below for these macros.)
*/
PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp));
PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp));
#endif
#ifdef PNG_READ_USER_CHUNKS_SUPPORTED
/* This callback is called only for *unknown* chunks. If
* PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known
* chunks to be treated as unknown, however in this case the callback must do
* any processing required by the chunk (e.g. by calling the appropriate
* png_set_ APIs.)
*
* There is no write support - on write, by default, all the chunks in the
* 'unknown' list are written in the specified position.
*
* The integer return from the callback function is interpreted thus:
*
* negative: An error occured, png_chunk_error will be called.
* zero: The chunk was not handled, the chunk will be saved. A critical
* chunk will cause an error at this point unless it is to be saved.
* positive: The chunk was handled, libpng will ignore/discard it.
*
* See "INTERACTION WTIH USER CHUNK CALLBACKS" below for important notes about
* how this behavior will change in libpng 1.7
*/
PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr,
png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn));
#endif
#ifdef PNG_USER_CHUNKS_SUPPORTED
PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr));
#endif
#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
/* Sets the function callbacks for the push reader, and a pointer to a
* user-defined structure available to the callback functions.
*/
PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr,
png_voidp progressive_ptr, png_progressive_info_ptr info_fn,
png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn));
/* Returns the user pointer associated with the push read functions */
PNG_EXPORT(91, png_voidp, png_get_progressive_ptr,
(png_const_structrp png_ptr));
/* Function to be called when data becomes available */
PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr,
png_inforp info_ptr, png_bytep buffer, png_size_t buffer_size));
/* A function which may be called *only* within png_process_data to stop the
* processing of any more data. The function returns the number of bytes
* remaining, excluding any that libpng has cached internally. A subsequent
* call to png_process_data must supply these bytes again. If the argument
* 'save' is set to true the routine will first save all the pending data and
* will always return 0.
*/
PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structrp, int save));
/* A function which may be called *only* outside (after) a call to
* png_process_data. It returns the number of bytes of data to skip in the
* input. Normally it will return 0, but if it returns a non-zero value the
* application must skip than number of bytes of input data and pass the
* following data to the next call to png_process_data.
*/
PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp));
#ifdef PNG_READ_INTERLACING_SUPPORTED
/* Function that combines rows. 'new_row' is a flag that should come from
* the callback and be non-NULL if anything needs to be done; the library
* stores its own version of the new data internally and ignores the passed
* in value.
*/
PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr,
png_bytep old_row, png_const_bytep new_row));
#endif /* PNG_READ_INTERLACING_SUPPORTED */
#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */
PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr,
png_alloc_size_t size), PNG_ALLOCATED);
/* Added at libpng version 1.4.0 */
PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr,
png_alloc_size_t size), PNG_ALLOCATED);
/* Added at libpng version 1.2.4 */
PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr,
png_alloc_size_t size), PNG_ALLOCATED);
/* Frees a pointer allocated by png_malloc() */
PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr));
/* Free data that was allocated internally */
PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr,
png_inforp info_ptr, png_uint_32 free_me, int num));
/* Reassign responsibility for freeing existing data, whether allocated
* by libpng or by the application; this works on the png_info structure passed
* in, it does not change the state for other png_info structures.
*
* It is unlikely that this function works correctly as of 1.6.0 and using it
* may result either in memory leaks or double free of allocated data.
*/
PNG_EXPORTA(99, void, png_data_freer, (png_const_structrp png_ptr,
png_inforp info_ptr, int freer, png_uint_32 mask), PNG_DEPRECATED);
/* Assignments for png_data_freer */
#define PNG_DESTROY_WILL_FREE_DATA 1
#define PNG_SET_WILL_FREE_DATA 1
#define PNG_USER_WILL_FREE_DATA 2
/* Flags for png_ptr->free_me and info_ptr->free_me */
#define PNG_FREE_HIST 0x0008
#define PNG_FREE_ICCP 0x0010
#define PNG_FREE_SPLT 0x0020
#define PNG_FREE_ROWS 0x0040
#define PNG_FREE_PCAL 0x0080
#define PNG_FREE_SCAL 0x0100
#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED
# define PNG_FREE_UNKN 0x0200
#endif
/* PNG_FREE_LIST 0x0400 removed in 1.6.0 because it is ignored */
#define PNG_FREE_PLTE 0x1000
#define PNG_FREE_TRNS 0x2000
#define PNG_FREE_TEXT 0x4000
#define PNG_FREE_ALL 0x7fff
#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */
#ifdef PNG_USER_MEM_SUPPORTED
PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr,
png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED);
PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr,
png_voidp ptr), PNG_DEPRECATED);
#endif
#ifdef PNG_ERROR_TEXT_SUPPORTED
/* Fatal error in PNG image of libpng - can't continue */
PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr,
png_const_charp error_message), PNG_NORETURN);
/* The same, but the chunk name is prepended to the error string. */
PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr,
png_const_charp error_message), PNG_NORETURN);
#else
/* Fatal error in PNG image of libpng - can't continue */
PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN);
#endif
#ifdef PNG_WARNINGS_SUPPORTED
/* Non-fatal error in libpng. Can continue, but may have a problem. */
PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr,
png_const_charp warning_message));
/* Non-fatal error in libpng, chunk name is prepended to message. */
PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr,
png_const_charp warning_message));
#endif
#ifdef PNG_BENIGN_ERRORS_SUPPORTED
/* Benign error in libpng. Can continue, but may have a problem.
* User can choose whether to handle as a fatal error or as a warning. */
PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr,
png_const_charp warning_message));
#ifdef PNG_READ_SUPPORTED
/* Same, chunk name is prepended to message (only during read) */
PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr,
png_const_charp warning_message));
#endif
PNG_EXPORT(109, void, png_set_benign_errors,
(png_structrp png_ptr, int allowed));
#else
# ifdef PNG_ALLOW_BENIGN_ERRORS
# define png_benign_error png_warning
# define png_chunk_benign_error png_chunk_warning
# else
# define png_benign_error png_error
# define png_chunk_benign_error png_chunk_error
# endif
#endif
/* The png_set_<chunk> functions are for storing values in the png_info_struct.
* Similarly, the png_get_<chunk> calls are used to read values from the
* png_info_struct, either storing the parameters in the passed variables, or
* setting pointers into the png_info_struct where the data is stored. The
* png_get_<chunk> functions return a non-zero value if the data was available
* in info_ptr, or return zero and do not change any of the parameters if the
* data was not available.
*
* These functions should be used instead of directly accessing png_info
* to avoid problems with future changes in the size and internal layout of
* png_info_struct.
*/
/* Returns "flag" if chunk data is valid in info_ptr. */
PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr,
png_const_inforp info_ptr, png_uint_32 flag));
/* Returns number of bytes needed to hold a transformed row. */
PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
#ifdef PNG_INFO_IMAGE_SUPPORTED
/* Returns row_pointers, which is an array of pointers to scanlines that was
* returned from png_read_png().
*/
PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Set row_pointers, which is an array of pointers to scanlines for use
* by png_write_png().
*/
PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr,
png_inforp info_ptr, png_bytepp row_pointers));
#endif
/* Returns number of color channels in image. */
PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
#ifdef PNG_EASY_ACCESS_SUPPORTED
/* Returns image width in pixels. */
PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image height in pixels. */
PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image bit_depth. */
PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image color_type. */
PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image filter_type. */
PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image interlace_type. */
PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image compression_type. */
PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
/* Returns image resolution in pixels per meter, from pHYs chunk data. */
PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
/* Returns pixel aspect ratio, computed from pHYs chunk data. */
PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio,
(png_const_structrp png_ptr, png_const_inforp info_ptr))
PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr))
/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */
PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(128, png_int_32, png_get_x_offset_microns,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(129, png_int_32, png_get_y_offset_microns,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
#endif /* PNG_EASY_ACCESS_SUPPORTED */
#ifdef PNG_READ_SUPPORTED
/* Returns pointer to signature string read from PNG header */
PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
#endif
#ifdef PNG_bKGD_SUPPORTED
PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr,
png_inforp info_ptr, png_color_16p *background));
#endif
#ifdef PNG_bKGD_SUPPORTED
PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_color_16p background));
#endif
#ifdef PNG_cHRM_SUPPORTED
PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr,
png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x,
double *red_y, double *green_x, double *green_y, double *blue_x,
double *blue_y))
PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr,
png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z,
double *green_X, double *green_Y, double *green_Z, double *blue_X,
double *blue_Y, double *blue_Z))
PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr,
png_fixed_point *int_white_x, png_fixed_point *int_white_y,
png_fixed_point *int_red_x, png_fixed_point *int_red_y,
png_fixed_point *int_green_x, png_fixed_point *int_green_y,
png_fixed_point *int_blue_x, png_fixed_point *int_blue_y))
PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr,
png_fixed_point *int_red_X, png_fixed_point *int_red_Y,
png_fixed_point *int_red_Z, png_fixed_point *int_green_X,
png_fixed_point *int_green_Y, png_fixed_point *int_green_Z,
png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y,
png_fixed_point *int_blue_Z))
#endif
#ifdef PNG_cHRM_SUPPORTED
PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr,
png_inforp info_ptr,
double white_x, double white_y, double red_x, double red_y, double green_x,
double green_y, double blue_x, double blue_y))
PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr,
png_inforp info_ptr, double red_X, double red_Y, double red_Z,
double green_X, double green_Y, double green_Z, double blue_X,
double blue_Y, double blue_Z))
PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr,
png_inforp info_ptr, png_fixed_point int_white_x,
png_fixed_point int_white_y, png_fixed_point int_red_x,
png_fixed_point int_red_y, png_fixed_point int_green_x,
png_fixed_point int_green_y, png_fixed_point int_blue_x,
png_fixed_point int_blue_y))
PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr,
png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y,
png_fixed_point int_red_Z, png_fixed_point int_green_X,
png_fixed_point int_green_Y, png_fixed_point int_green_Z,
png_fixed_point int_blue_X, png_fixed_point int_blue_Y,
png_fixed_point int_blue_Z))
#endif
#ifdef PNG_gAMA_SUPPORTED
PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr,
png_const_inforp info_ptr, double *file_gamma))
PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr,
png_fixed_point *int_file_gamma))
#endif
#ifdef PNG_gAMA_SUPPORTED
PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr,
png_inforp info_ptr, double file_gamma))
PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr,
png_inforp info_ptr, png_fixed_point int_file_gamma))
#endif
#ifdef PNG_hIST_SUPPORTED
PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr,
png_inforp info_ptr, png_uint_16p *hist));
#endif
#ifdef PNG_hIST_SUPPORTED
PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_uint_16p hist));
#endif
PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr,
png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height,
int *bit_depth, int *color_type, int *interlace_method,
int *compression_method, int *filter_method));
PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr,
png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth,
int color_type, int interlace_method, int compression_method,
int filter_method));
#ifdef PNG_oFFs_SUPPORTED
PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr,
png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y,
int *unit_type));
#endif
#ifdef PNG_oFFs_SUPPORTED
PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr,
png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y,
int unit_type));
#endif
#ifdef PNG_pCAL_SUPPORTED
PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr,
png_inforp info_ptr, png_charp *purpose, png_int_32 *X0,
png_int_32 *X1, int *type, int *nparams, png_charp *units,
png_charpp *params));
#endif
#ifdef PNG_pCAL_SUPPORTED
PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1,
int type, int nparams, png_const_charp units, png_charpp params));
#endif
#ifdef PNG_pHYs_SUPPORTED
PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr,
png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y,
int *unit_type));
#endif
#ifdef PNG_pHYs_SUPPORTED
PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr,
png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type));
#endif
PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr,
png_inforp info_ptr, png_colorp *palette, int *num_palette));
PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr,
png_inforp info_ptr, png_const_colorp palette, int num_palette));
#ifdef PNG_sBIT_SUPPORTED
PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr,
png_inforp info_ptr, png_color_8p *sig_bit));
#endif
#ifdef PNG_sBIT_SUPPORTED
PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_color_8p sig_bit));
#endif
#ifdef PNG_sRGB_SUPPORTED
PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr,
png_const_inforp info_ptr, int *file_srgb_intent));
#endif
#ifdef PNG_sRGB_SUPPORTED
PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr,
png_inforp info_ptr, int srgb_intent));
PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr,
png_inforp info_ptr, int srgb_intent));
#endif
#ifdef PNG_iCCP_SUPPORTED
PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr,
png_inforp info_ptr, png_charpp name, int *compression_type,
png_bytepp profile, png_uint_32 *proflen));
#endif
#ifdef PNG_iCCP_SUPPORTED
PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_charp name, int compression_type,
png_const_bytep profile, png_uint_32 proflen));
#endif
#ifdef PNG_sPLT_SUPPORTED
PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr,
png_inforp info_ptr, png_sPLT_tpp entries));
#endif
#ifdef PNG_sPLT_SUPPORTED
PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_sPLT_tp entries, int nentries));
#endif
#ifdef PNG_TEXT_SUPPORTED
/* png_get_text also returns the number of text chunks in *num_text */
PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr,
png_inforp info_ptr, png_textp *text_ptr, int *num_text));
#endif
/* Note while png_set_text() will accept a structure whose text,
* language, and translated keywords are NULL pointers, the structure
* returned by png_get_text will always contain regular
* zero-terminated C strings. They might be empty strings but
* they will never be NULL pointers.
*/
#ifdef PNG_TEXT_SUPPORTED
PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_textp text_ptr, int num_text));
#endif
#ifdef PNG_tIME_SUPPORTED
PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr,
png_inforp info_ptr, png_timep *mod_time));
#endif
#ifdef PNG_tIME_SUPPORTED
PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_timep mod_time));
#endif
#ifdef PNG_tRNS_SUPPORTED
PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr,
png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans,
png_color_16p *trans_color));
#endif
#ifdef PNG_tRNS_SUPPORTED
PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr,
png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans,
png_const_color_16p trans_color));
#endif
#ifdef PNG_sCAL_SUPPORTED
PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr,
png_const_inforp info_ptr, int *unit, double *width, double *height))
#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \
defined(PNG_FLOATING_POINT_SUPPORTED)
/* NOTE: this API is currently implemented using floating point arithmetic,
* consequently it can only be used on systems with floating point support.
* In any case the range of values supported by png_fixed_point is small and it
* is highly recommended that png_get_sCAL_s be used instead.
*/
PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit,
png_fixed_point *width, png_fixed_point *height))
#endif
PNG_EXPORT(169, png_uint_32, png_get_sCAL_s,
(png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit,
png_charpp swidth, png_charpp sheight));
PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr,
png_inforp info_ptr, int unit, double width, double height))
PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr,
png_inforp info_ptr, int unit, png_fixed_point width,
png_fixed_point height))
PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr,
png_inforp info_ptr, int unit,
png_const_charp swidth, png_const_charp sheight));
#endif /* PNG_sCAL_SUPPORTED */
#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED
/* Provide the default handling for all unknown chunks or, optionally, for
* specific unknown chunks.
*
* NOTE: prior to 1.6.0 the handling specified for particular chunks on read was
* ignored and the default was used, the per-chunk setting only had an effect on
* write. If you wish to have chunk-specific handling on read in code that must
* work on earlier versions you must use a user chunk callback to specify the
* desired handling (keep or discard.)
*
* The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The
* parameter is interpreted as follows:
*
* READ:
* PNG_HANDLE_CHUNK_AS_DEFAULT:
* Known chunks: do normal libpng processing, do not keep the chunk (but
* see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED)
* Unknown chunks: for a specific chunk use the global default, when used
* as the default discard the chunk data.
* PNG_HANDLE_CHUNK_NEVER:
* Discard the chunk data.
* PNG_HANDLE_CHUNK_IF_SAFE:
* Keep the chunk data if the chunk is not critical else raise a chunk
* error.
* PNG_HANDLE_CHUNK_ALWAYS:
* Keep the chunk data.
*
* If the chunk data is saved it can be retrieved using png_get_unknown_chunks,
* below. Notice that specifying "AS_DEFAULT" as a global default is equivalent
* to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks
* it simply resets the behavior to the libpng default.
*
* INTERACTION WTIH USER CHUNK CALLBACKS:
* The per-chunk handling is always used when there is a png_user_chunk_ptr
* callback and the callback returns 0; the chunk is then always stored *unless*
* it is critical and the per-chunk setting is other than ALWAYS. Notice that
* the global default is *not* used in this case. (In effect the per-chunk
* value is incremented to at least IF_SAFE.)
*
* IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and
* per-chunk defaults will be honored. If you want to preserve the current
* behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE
* as the default - if you don't do this libpng 1.6 will issue a warning.
*
* If you want unhandled unknown chunks to be discarded in libpng 1.6 and
* earlier simply return '1' (handled).
*
* PNG_HANDLE_AS_UNKNOWN_SUPPORTED:
* If this is *not* set known chunks will always be handled by libpng and
* will never be stored in the unknown chunk list. Known chunks listed to
* png_set_keep_unknown_chunks will have no effect. If it is set then known
* chunks listed with a keep other than AS_DEFAULT will *never* be processed
* by libpng, in addition critical chunks must either be processed by the
* callback or saved.
*
* The IHDR and IEND chunks must not be listed. Because this turns off the
* default handling for chunks that would otherwise be recognized the
* behavior of libpng transformations may well become incorrect!
*
* WRITE:
* When writing chunks the options only apply to the chunks specified by
* png_set_unknown_chunks (below), libpng will *always* write known chunks
* required by png_set_ calls and will always write the core critical chunks
* (as required for PLTE).
*
* Each chunk in the png_set_unknown_chunks list is looked up in the
* png_set_keep_unknown_chunks list to find the keep setting, this is then
* interpreted as follows:
*
* PNG_HANDLE_CHUNK_AS_DEFAULT:
* Write safe-to-copy chunks and write other chunks if the global
* default is set to _ALWAYS, otherwise don't write this chunk.
* PNG_HANDLE_CHUNK_NEVER:
* Do not write the chunk.
* PNG_HANDLE_CHUNK_IF_SAFE:
* Write the chunk if it is safe-to-copy, otherwise do not write it.
* PNG_HANDLE_CHUNK_ALWAYS:
* Write the chunk.
*
* Note that the default behavior is effectively the opposite of the read case -
* in read unknown chunks are not stored by default, in write they are written
* by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different
* - on write the safe-to-copy bit is checked, on read the critical bit is
* checked and on read if the chunk is critical an error will be raised.
*
* num_chunks:
* ===========
* If num_chunks is positive, then the "keep" parameter specifies the manner
* for handling only those chunks appearing in the chunk_list array,
* otherwise the chunk list array is ignored.
*
* If num_chunks is 0 the "keep" parameter specifies the default behavior for
* unknown chunks, as described above.
*
* If num_chunks is negative, then the "keep" parameter specifies the manner
* for handling all unknown chunks plus all chunks recognized by libpng
* except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to
* be processed by libpng.
*/
PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr,
int keep, png_const_bytep chunk_list, int num_chunks));
/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned;
* the result is therefore true (non-zero) if special handling is required,
* false for the default handling.
*/
PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr,
png_const_bytep chunk_name));
#endif
#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED
PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr,
png_inforp info_ptr, png_const_unknown_chunkp unknowns,
int num_unknowns));
/* NOTE: prior to 1.6.0 this routine set the 'location' field of the added
* unknowns to the location currently stored in the png_struct. This is
* invariably the wrong value on write. To fix this call the following API
* for each chunk in the list with the correct location. If you know your
* code won't be compiled on earlier versions you can rely on
* png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing
* the correct thing.
*/
PNG_EXPORT(175, void, png_set_unknown_chunk_location,
(png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location));
PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr,
png_inforp info_ptr, png_unknown_chunkpp entries));
#endif
/* Png_free_data() will turn off the "valid" flag for anything it frees.
* If you need to turn it off for a chunk that your application has freed,
* you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK);
*/
PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr,
png_inforp info_ptr, int mask));
#ifdef PNG_INFO_IMAGE_SUPPORTED
/* The "params" pointer is currently not used and is for future expansion. */
PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr,
int transforms, png_voidp params));
PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr,
int transforms, png_voidp params));
#endif
PNG_EXPORT(180, png_const_charp, png_get_copyright,
(png_const_structrp png_ptr));
PNG_EXPORT(181, png_const_charp, png_get_header_ver,
(png_const_structrp png_ptr));
PNG_EXPORT(182, png_const_charp, png_get_header_version,
(png_const_structrp png_ptr));
PNG_EXPORT(183, png_const_charp, png_get_libpng_ver,
(png_const_structrp png_ptr));
#ifdef PNG_MNG_FEATURES_SUPPORTED
PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr,
png_uint_32 mng_features_permitted));
#endif
/* For use in png_set_keep_unknown, added to version 1.2.6 */
#define PNG_HANDLE_CHUNK_AS_DEFAULT 0
#define PNG_HANDLE_CHUNK_NEVER 1
#define PNG_HANDLE_CHUNK_IF_SAFE 2
#define PNG_HANDLE_CHUNK_ALWAYS 3
#define PNG_HANDLE_CHUNK_LAST 4
/* Strip the prepended error numbers ("#nnn ") from error and warning
* messages before passing them to the error or warning handler.
*/
#ifdef PNG_ERROR_NUMBERS_SUPPORTED
PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr,
png_uint_32 strip_mode));
#endif
/* Added in libpng-1.2.6 */
#ifdef PNG_SET_USER_LIMITS_SUPPORTED
PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr,
png_uint_32 user_width_max, png_uint_32 user_height_max));
PNG_EXPORT(187, png_uint_32, png_get_user_width_max,
(png_const_structrp png_ptr));
PNG_EXPORT(188, png_uint_32, png_get_user_height_max,
(png_const_structrp png_ptr));
/* Added in libpng-1.4.0 */
PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr,
png_uint_32 user_chunk_cache_max));
PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max,
(png_const_structrp png_ptr));
/* Added in libpng-1.4.1 */
PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr,
png_alloc_size_t user_chunk_cache_max));
PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max,
(png_const_structrp png_ptr));
#endif
#if defined(PNG_INCH_CONVERSIONS_SUPPORTED)
PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch,
(png_const_structrp png_ptr, png_const_inforp info_ptr));
PNG_FP_EXPORT(196, float, png_get_x_offset_inches,
(png_const_structrp png_ptr, png_const_inforp info_ptr))
#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */
PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr))
#endif
PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr,
png_const_inforp info_ptr))
#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */
PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed,
(png_const_structrp png_ptr, png_const_inforp info_ptr))
#endif
# ifdef PNG_pHYs_SUPPORTED
PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr,
png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y,
int *unit_type));
# endif /* PNG_pHYs_SUPPORTED */
#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */
/* Added in libpng-1.4.0 */
#ifdef PNG_IO_STATE_SUPPORTED
PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr));
/* Removed from libpng 1.6; use png_get_io_chunk_type. */
PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr),
PNG_DEPRECATED)
PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type,
(png_const_structrp png_ptr));
/* The flags returned by png_get_io_state() are the following: */
# define PNG_IO_NONE 0x0000 /* no I/O at this moment */
# define PNG_IO_READING 0x0001 /* currently reading */
# define PNG_IO_WRITING 0x0002 /* currently writing */
# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */
# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */
# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */
# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */
# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */
# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */
#endif /* ?PNG_IO_STATE_SUPPORTED */
/* Interlace support. The following macros are always defined so that if
* libpng interlace handling is turned off the macros may be used to handle
* interlaced images within the application.
*/
#define PNG_INTERLACE_ADAM7_PASSES 7
/* Two macros to return the first row and first column of the original,
* full, image which appears in a given pass. 'pass' is in the range 0
* to 6 and the result is in the range 0 to 7.
*/
#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7)
#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7)
/* A macro to return the offset between pixels in the output row for a pair of
* pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that
* follows. Note that ROW_OFFSET is the offset from one row to the next whereas
* COL_OFFSET is from one column to the next, within a row.
*/
#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8)
#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1))
/* Two macros to help evaluate the number of rows or columns in each
* pass. This is expressed as a shift - effectively log2 of the number or
* rows or columns in each 8x8 tile of the original image.
*/
#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3)
#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3)
/* Hence two macros to determine the number of rows or columns in a given
* pass of an image given its height or width. In fact these macros may
* return non-zero even though the sub-image is empty, because the other
* dimension may be empty for a small image.
*/
#define PNG_PASS_ROWS(height, pass) (((height)+(((1<<PNG_PASS_ROW_SHIFT(pass))\
-1)-PNG_PASS_START_ROW(pass)))>>PNG_PASS_ROW_SHIFT(pass))
#define PNG_PASS_COLS(width, pass) (((width)+(((1<<PNG_PASS_COL_SHIFT(pass))\
-1)-PNG_PASS_START_COL(pass)))>>PNG_PASS_COL_SHIFT(pass))
/* For the reader row callbacks (both progressive and sequential) it is
* necessary to find the row in the output image given a row in an interlaced
* image, so two more macros:
*/
#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \
(((y_in)<<PNG_PASS_ROW_SHIFT(pass))+PNG_PASS_START_ROW(pass))
#define PNG_COL_FROM_PASS_COL(x_in, pass) \
(((x_in)<<PNG_PASS_COL_SHIFT(pass))+PNG_PASS_START_COL(pass))
/* Two macros which return a boolean (0 or 1) saying whether the given row
* or column is in a particular pass. These use a common utility macro that
* returns a mask for a given pass - the offset 'off' selects the row or
* column version. The mask has the appropriate bit set for each column in
* the tile.
*/
#define PNG_PASS_MASK(pass,off) ( \
((0x110145AF>>(((7-(off))-(pass))<<2)) & 0xF) | \
((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0))
#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \
((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1)
#define PNG_COL_IN_INTERLACE_PASS(x, pass) \
((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1)
#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED
/* With these routines we avoid an integer divide, which will be slower on
* most machines. However, it does take more operations than the corresponding
* divide method, so it may be slower on a few RISC systems. There are two
* shifts (by 8 or 16 bits) and an addition, versus a single integer divide.
*
* Note that the rounding factors are NOT supposed to be the same! 128 and
* 32768 are correct for the NODIV code; 127 and 32767 are correct for the
* standard method.
*
* [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ]
*/
/* fg and bg should be in `gamma 1.0' space; alpha is the opacity */
# define png_composite(composite, fg, alpha, bg) \
{ png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \
* (png_uint_16)(alpha) \
+ (png_uint_16)(bg)*(png_uint_16)(255 \
- (png_uint_16)(alpha)) + 128); \
(composite) = (png_byte)((temp + (temp >> 8)) >> 8); }
# define png_composite_16(composite, fg, alpha, bg) \
{ png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \
* (png_uint_32)(alpha) \
+ (png_uint_32)(bg)*(65535 \
- (png_uint_32)(alpha)) + 32768); \
(composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); }
#else /* Standard method using integer division */
# define png_composite(composite, fg, alpha, bg) \
(composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \
(png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \
127) / 255)
# define png_composite_16(composite, fg, alpha, bg) \
(composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \
(png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \
32767) / 65535)
#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */
#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED
PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf));
PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf));
PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf));
#endif
PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr,
png_const_bytep buf));
/* No png_get_int_16 -- may be added if there's a real need for it. */
/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */
#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED
PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i));
#endif
#ifdef PNG_SAVE_INT_32_SUPPORTED
PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i));
#endif
/* Place a 16-bit number into a buffer in PNG byte order.
* The parameter is declared unsigned int, not png_uint_16,
* just to avoid potential problems on pre-ANSI C compilers.
*/
#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED
PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i));
/* No png_save_int_16 -- may be added if there's a real need for it. */
#endif
#ifdef PNG_USE_READ_MACROS
/* Inline macros to do direct reads of bytes from the input buffer.
* The png_get_int_32() routine assumes we are using two's complement
* format for negative values, which is almost certainly true.
*/
# define PNG_get_uint_32(buf) \
(((png_uint_32)(*(buf)) << 24) + \
((png_uint_32)(*((buf) + 1)) << 16) + \
((png_uint_32)(*((buf) + 2)) << 8) + \
((png_uint_32)(*((buf) + 3))))
/* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the
* function) incorrectly returned a value of type png_uint_32.
*/
# define PNG_get_uint_16(buf) \
((png_uint_16) \
(((unsigned int)(*(buf)) << 8) + \
((unsigned int)(*((buf) + 1)))))
# define PNG_get_int_32(buf) \
((png_int_32)((*(buf) & 0x80) \
? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \
: (png_int_32)png_get_uint_32(buf)))
/* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h,
* but defining a macro name prefixed with PNG_PREFIX.
*/
# ifndef PNG_PREFIX
# define png_get_uint_32(buf) PNG_get_uint_32(buf)
# define png_get_uint_16(buf) PNG_get_uint_16(buf)
# define png_get_int_32(buf) PNG_get_int_32(buf)
# endif
#else
# ifdef PNG_PREFIX
/* No macros; revert to the (redefined) function */
# define PNG_get_uint_32 (png_get_uint_32)
# define PNG_get_uint_16 (png_get_uint_16)
# define PNG_get_int_32 (png_get_int_32)
# endif
#endif
/*******************************************************************************
* SIMPLIFIED API
*******************************************************************************
*
* Please read the documentation in libpng-manual.txt (TODO: write said
* documentation) if you don't understand what follows.
*
* The simplified API hides the details of both libpng and the PNG file format
* itself. It allows PNG files to be read into a very limited number of
* in-memory bitmap formats or to be written from the same formats. If these
* formats do not accomodate your needs then you can, and should, use the more
* sophisticated APIs above - these support a wide variety of in-memory formats
* and a wide variety of sophisticated transformations to those formats as well
* as a wide variety of APIs to manipulate ancillary information.
*
* To read a PNG file using the simplified API:
*
* 1) Declare a 'png_image' structure (see below) on the stack and set the
* version field to PNG_IMAGE_VERSION.
* 2) Call the appropriate png_image_begin_read... function.
* 3) Set the png_image 'format' member to the required sample format.
* 4) Allocate a buffer for the image and, if required, the color-map.
* 5) Call png_image_finish_read to read the image and, if required, the
* color-map into your buffers.
*
* There are no restrictions on the format of the PNG input itself; all valid
* color types, bit depths, and interlace methods are acceptable, and the
* input image is transformed as necessary to the requested in-memory format
* during the png_image_finish_read() step. The only caveat is that if you
* request a color-mapped image from a PNG that is full-color or makes
* complex use of an alpha channel the transformation is extremely lossy and the
* result may look terrible.
*
* To write a PNG file using the simplified API:
*
* 1) Declare a 'png_image' structure on the stack and memset() it to all zero.
* 2) Initialize the members of the structure that describe the image, setting
* the 'format' member to the format of the image samples.
* 3) Call the appropriate png_image_write... function with a pointer to the
* image and, if necessary, the color-map to write the PNG data.
*
* png_image is a structure that describes the in-memory format of an image
* when it is being read or defines the in-memory format of an image that you
* need to write:
*/
#define PNG_IMAGE_VERSION 1
typedef struct png_control *png_controlp;
typedef struct
{
png_controlp opaque; /* Initialize to NULL, free with png_image_free */
png_uint_32 version; /* Set to PNG_IMAGE_VERSION */
png_uint_32 width; /* Image width in pixels (columns) */
png_uint_32 height; /* Image height in pixels (rows) */
png_uint_32 format; /* Image format as defined below */
png_uint_32 flags; /* A bit mask containing informational flags */
png_uint_32 colormap_entries;
/* Number of entries in the color-map */
/* In the event of an error or warning the following field will be set to a
* non-zero value and the 'message' field will contain a '\0' terminated
* string with the libpng error or warning message. If both warnings and
* an error were encountered, only the error is recorded. If there
* are multiple warnings, only the first one is recorded.
*
* The upper 30 bits of this value are reserved, the low two bits contain
* a value as follows:
*/
# define PNG_IMAGE_WARNING 1
# define PNG_IMAGE_ERROR 2
/*
* The result is a two bit code such that a value more than 1 indicates
* a failure in the API just called:
*
* 0 - no warning or error
* 1 - warning
* 2 - error
* 3 - error preceded by warning
*/
# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1)
png_uint_32 warning_or_error;
char message[64];
} png_image, *png_imagep;
/* The samples of the image have one to four channels whose components have
* original values in the range 0 to 1.0:
*
* 1: A single gray or luminance channel (G).
* 2: A gray/luminance channel and an alpha channel (GA).
* 3: Three red, green, blue color channels (RGB).
* 4: Three color channels and an alpha channel (RGBA).
*
* The components are encoded in one of two ways:
*
* a) As a small integer, value 0..255, contained in a single byte. For the
* alpha channel the original value is simply value/255. For the color or
* luminance channels the value is encoded according to the sRGB specification
* and matches the 8-bit format expected by typical display devices.
*
* The color/gray channels are not scaled (pre-multiplied) by the alpha
* channel and are suitable for passing to color management software.
*
* b) As a value in the range 0..65535, contained in a 2-byte integer. All
* channels can be converted to the original value by dividing by 65535; all
* channels are linear. Color channels use the RGB encoding (RGB end-points) of
* the sRGB specification. This encoding is identified by the
* PNG_FORMAT_FLAG_LINEAR flag below.
*
* When the simplified API needs to convert between sRGB and linear colorspaces,
* the actual sRGB transfer curve defined in the sRGB specification (see the
* article at http://en.wikipedia.org/wiki/SRGB) is used, not the gamma=1/2.2
* approximation used elsewhere in libpng.
*
* When an alpha channel is present it is expected to denote pixel coverage
* of the color or luminance channels and is returned as an associated alpha
* channel: the color/gray channels are scaled (pre-multiplied) by the alpha
* value.
*
* The samples are either contained directly in the image data, between 1 and 8
* bytes per pixel according to the encoding, or are held in a color-map indexed
* by bytes in the image data. In the case of a color-map the color-map entries
* are individual samples, encoded as above, and the image data has one byte per
* pixel to select the relevant sample from the color-map.
*/
/* PNG_FORMAT_*
*
* #defines to be used in png_image::format. Each #define identifies a
* particular layout of sample data and, if present, alpha values. There are
* separate defines for each of the two component encodings.
*
* A format is built up using single bit flag values. All combinations are
* valid. Formats can be built up from the flag values or you can use one of
* the predefined values below. When testing formats always use the FORMAT_FLAG
* macros to test for individual features - future versions of the library may
* add new flags.
*
* When reading or writing color-mapped images the format should be set to the
* format of the entries in the color-map then png_image_{read,write}_colormap
* called to read or write the color-map and set the format correctly for the
* image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly!
*
* NOTE: libpng can be built with particular features disabled, if you see
* compiler errors because the definition of one of the following flags has been
* compiled out it is because libpng does not have the required support. It is
* possible, however, for the libpng configuration to enable the format on just
* read or just write; in that case you may see an error at run time. You can
* guard against this by checking for the definition of the appropriate
* "_SUPPORTED" macro, one of:
*
* PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED
*/
#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */
#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */
#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2 byte channels else 1 byte */
#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */
#ifdef PNG_FORMAT_BGR_SUPPORTED
# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */
#endif
#ifdef PNG_FORMAT_AFIRST_SUPPORTED
# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */
#endif
/* Commonly used formats have predefined macros.
*
* First the single byte (sRGB) formats:
*/
#define PNG_FORMAT_GRAY 0
#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA
#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST)
#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR
#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR)
#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA)
#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST)
#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA)
#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST)
/* Then the linear 2-byte formats. When naming these "Y" is used to
* indicate a luminance (gray) channel.
*/
#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR
#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA)
#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR)
#define PNG_FORMAT_LINEAR_RGB_ALPHA \
(PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA)
/* With color-mapped formats the image data is one byte for each pixel, the byte
* is an index into the color-map which is formatted as above. To obtain a
* color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP
* to one of the above definitions, or you can use one of the definitions below.
*/
#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP)
#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP)
#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP)
#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP)
#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP)
#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP)
/* PNG_IMAGE macros
*
* These are convenience macros to derive information from a png_image
* structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the
* actual image sample values - either the entries in the color-map or the
* pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values
* for the pixels and will always return 1 for color-mapped formats. The
* remaining macros return information about the rows in the image and the
* complete image.
*
* NOTE: All the macros that take a png_image::format parameter are compile time
* constants if the format parameter is, itself, a constant. Therefore these
* macros can be used in array declarations and case labels where required.
* Similarly the macros are also pre-processor constants (sizeof is not used) so
* they can be used in #if tests.
*
* First the information about the samples.
*/
#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\
(((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1)
/* Return the total number of channels in a given format: 1..4 */
#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\
((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1)
/* Return the size in bytes of a single component of a pixel or color-map
* entry (as appropriate) in the image: 1 or 2.
*/
#define PNG_IMAGE_SAMPLE_SIZE(fmt)\
(PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt))
/* This is the size of the sample data for one sample. If the image is
* color-mapped it is the size of one color-map entry (and image pixels are
* one byte in size), otherwise it is the size of one image pixel.
*/
#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\
(PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256)
/* The maximum size of the color-map required by the format expressed in a
* count of components. This can be used to compile-time allocate a
* color-map:
*
* png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)];
*
* png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)];
*
* Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the
* information from one of the png_image_begin_read_ APIs and dynamically
* allocate the required memory.
*/
/* Corresponding information about the pixels */
#define PNG_IMAGE_PIXEL_(test,fmt)\
(((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt))
#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\
PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt)
/* The number of separate channels (components) in a pixel; 1 for a
* color-mapped image.
*/
#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\
PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt)
/* The size, in bytes, of each component in a pixel; 1 for a color-mapped
* image.
*/
#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt)
/* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */
/* Information about the whole row, or whole image */
#define PNG_IMAGE_ROW_STRIDE(image)\
(PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width)
/* Return the total number of components in a single row of the image; this
* is the minimum 'row stride', the minimum count of components between each
* row. For a color-mapped image this is the minimum number of bytes in a
* row.
*/
#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\
(PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride))
/* Return the size, in bytes, of an image buffer given a png_image and a row
* stride - the number of components to leave space for in each row.
*/
#define PNG_IMAGE_SIZE(image)\
PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image))
/* Return the size, in bytes, of the image in memory given just a png_image;
* the row stride is the minimum stride required for the image.
*/
#define PNG_IMAGE_COLORMAP_SIZE(image)\
(PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries)
/* Return the size, in bytes, of the color-map of this image. If the image
* format is not a color-map format this will return a size sufficient for
* 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if
* you don't want to allocate a color-map in this case.
*/
/* PNG_IMAGE_FLAG_*
*
* Flags containing additional information about the image are held in the
* 'flags' field of png_image.
*/
#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01
/* This indicates the the RGB values of the in-memory bitmap do not
* correspond to the red, green and blue end-points defined by sRGB.
*/
#define PNG_IMAGE_FLAG_FAST 0x02
/* On write emphasise speed over compression; the resultant PNG file will be
* larger but will be produced significantly faster, particular for large
* images. Do not use this option for images which will be distributed, only
* used it when producing intermediate files that will be read back in
* repeatedly. For a typical 24-bit image the option will double the read
* speed at the cost of increasing the image size by 25%, however for many
* more compressible images the PNG file can be 10 times larger with only a
* slight speed gain.
*/
#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04
/* On read if the image is a 16-bit per component image and there is no gAMA
* or sRGB chunk assume that the components are sRGB encoded. Notice that
* images output by the simplified API always have gamma information; setting
* this flag only affects the interpretation of 16-bit images from an
* external source. It is recommended that the application expose this flag
* to the user; the user can normally easily recognize the difference between
* linear and sRGB encoding. This flag has no effect on write - the data
* passed to the write APIs must have the correct encoding (as defined
* above.)
*
* If the flag is not set (the default) input 16-bit per component data is
* assumed to be linear.
*
* NOTE: the flag can only be set after the png_image_begin_read_ call,
* because that call initializes the 'flags' field.
*/
#ifdef PNG_SIMPLIFIED_READ_SUPPORTED
/* READ APIs
* ---------
*
* The png_image passed to the read APIs must have been initialized by setting
* the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.)
*/
#ifdef PNG_STDIO_SUPPORTED
PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image,
const char *file_name));
/* The named file is opened for read and the image header is filled in
* from the PNG header in the file.
*/
PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image,
FILE* file));
/* The PNG header is read from the stdio FILE object. */
#endif /* PNG_STDIO_SUPPORTED */
PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image,
png_const_voidp memory, png_size_t size));
/* The PNG header is read from the given memory buffer. */
PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image,
png_const_colorp background, void *buffer, png_int_32 row_stride,
void *colormap));
/* Finish reading the image into the supplied buffer and clean up the
* png_image structure.
*
* row_stride is the step, in byte or 2-byte units as appropriate,
* between adjacent rows. A positive stride indicates that the top-most row
* is first in the buffer - the normal top-down arrangement. A negative
* stride indicates that the bottom-most row is first in the buffer.
*
* background need only be supplied if an alpha channel must be removed from
* a png_byte format and the removal is to be done by compositing on a solid
* color; otherwise it may be NULL and any composition will be done directly
* onto the buffer. The value is an sRGB color to use for the background,
* for grayscale output the green channel is used.
*
* background must be supplied when an alpha channel must be removed from a
* single byte color-mapped output format, in other words if:
*
* 1) The original format from png_image_begin_read_from_* had
* PNG_FORMAT_FLAG_ALPHA set.
* 2) The format set by the application does not.
* 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and
* PNG_FORMAT_FLAG_LINEAR *not* set.
*
* For linear output removing the alpha channel is always done by compositing
* on black and background is ignored.
*
* colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must
* be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE.
* image->colormap_entries will be updated to the actual number of entries
* written to the colormap; this may be less than the original value.
*/
PNG_EXPORT(238, void, png_image_free, (png_imagep image));
/* Free any data allocated by libpng in image->opaque, setting the pointer to
* NULL. May be called at any time after the structure is initialized.
*/
#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */
#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED
/* WRITE APIS
* ----------
* For write you must initialize a png_image structure to describe the image to
* be written. To do this use memset to set the whole structure to 0 then
* initialize fields describing your image.
*
* version: must be set to PNG_IMAGE_VERSION
* opaque: must be initialized to NULL
* width: image width in pixels
* height: image height in rows
* format: the format of the data (image and color-map) you wish to write
* flags: set to 0 unless one of the defined flags applies; set
* PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB
* values do not correspond to the colors in sRGB.
* colormap_entries: set to the number of entries in the color-map (0 to 256)
*/
PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image,
const char *file, int convert_to_8bit, const void *buffer,
png_int_32 row_stride, const void *colormap));
/* Write the image to the named file. */
PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file,
int convert_to_8_bit, const void *buffer, png_int_32 row_stride,
const void *colormap));
/* Write the image to the given (FILE*). */
/* With both write APIs if image is in one of the linear formats with 16-bit
* data then setting convert_to_8_bit will cause the output to be an 8-bit PNG
* gamma encoded according to the sRGB specification, otherwise a 16-bit linear
* encoded PNG file is written.
*
* With color-mapped data formats the colormap parameter point to a color-map
* with at least image->colormap_entries encoded in the specified format. If
* the format is linear the written PNG color-map will be converted to sRGB
* regardless of the convert_to_8_bit flag.
*
* With all APIs row_stride is handled as in the read APIs - it is the spacing
* from one row to the next in component sized units (1 or 2 bytes) and if
* negative indicates a bottom-up row layout in the buffer.
*
* Note that the write API does not support interlacing or sub-8-bit pixels.
*/
#endif /* PNG_SIMPLIFIED_WRITE_SUPPORTED */
/*******************************************************************************
* END OF SIMPLIFIED API
******************************************************************************/
#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED
PNG_EXPORT(242, void, png_set_check_for_invalid_index,
(png_structrp png_ptr, int allowed));
# ifdef PNG_GET_PALETTE_MAX_SUPPORTED
PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr,
png_const_infop info_ptr));
# endif
#endif /* CHECK_FOR_INVALID_INDEX */
/*******************************************************************************
* IMPLEMENTATION OPTIONS
*******************************************************************************
*
* Support for arbitrary implementation-specific optimizations. The API allows
* particular options to be turned on or off. 'Option' is the number of the
* option and 'onoff' is 0 (off) or non-0 (on). The value returned is given
* by the PNG_OPTION_ defines below.
*
* HARDWARE: normally hardware capabilites, such as the Intel SSE instructions,
* are detected at run time, however sometimes it may be impossible
* to do this in user mode, in which case it is necessary to discover
* the capabilities in an OS specific way. Such capabilities are
* listed here when libpng has support for them and must be turned
* ON by the application if present.
*
* SOFTWARE: sometimes software optimizations actually result in performance
* decrease on some architectures or systems, or with some sets of
* PNG images. 'Software' options allow such optimizations to be
* selected at run time.
*/
#ifdef PNG_SET_OPTION_SUPPORTED
#ifdef PNG_ARM_NEON_API_SUPPORTED
# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */
#endif
#define PNG_OPTION_NEXT 2 /* Next option - numbers must be even */
/* Return values: NOTE: there are four values and 'off' is *not* zero */
#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */
#define PNG_OPTION_INVALID 1 /* Option number out of range */
#define PNG_OPTION_OFF 2
#define PNG_OPTION_ON 3
PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option,
int onoff));
#endif
/*******************************************************************************
* END OF HARDWARE OPTIONS
******************************************************************************/
/* Maintainer: Put new public prototypes here ^, in libpng.3, and project
* defs, scripts/pnglibconf.h, and scripts/pnglibconf.h.prebuilt
*/
/* The last ordinal number (this is the *last* one already used; the next
* one to use is one more than this.) Maintainer, remember to add an entry to
* scripts/symbols.def as well.
*/
#ifdef PNG_EXPORT_LAST_ORDINAL
PNG_EXPORT_LAST_ORDINAL(244);
#endif
#ifdef __cplusplus
}
#endif
#endif /* PNG_VERSION_INFO_ONLY */
/* Do not put anything past this line */
#endif /* PNG_H */
Reference in New Issue View Git Blame Copy Permalink