libpng/contrib/intel/INSTALL
2016-03-09 12:04:40 -06:00

115 lines
3.9 KiB
Plaintext

Enabling SSE support
Copyright (c) 2016 Google, Inc.
Written by Mike Klein and Matt Sarett
If you have moved intel_init.c and filter_sse2_intrinsics.c to a different
directory, be sure to update the '#include "../../pngpriv.h"' line in both
files if necessary to point to the correct relative location of pngpriv.h
with respect to the new location of those files.
To enable SSE support in libpng, follow the instructions in I, II, or III,
below:
I. Using patched "configure" scripts:
First, apply intel_sse.patch in your build directory.
patch -i contrib/intel/intel_sse.patch -p1
Then, if you are not building in a new GIT clone, e.g., in a tar
distribution, remove any existing pre-built configure scripts:
./configure --enable-maintainer-mode
make maintainer-clean
./autogen.sh --maintainer --clean
Finally, configure libpng with -DPNG_INTEL_SSE in CPPFLAGS. If you only
want to optimize reading 4bpp images, also use -DPNG_NO_INTEL_SSE_3BPP:
./autogen.sh --maintainer
CPPFLAGS="-DPNG_INTEL_SSE -DPNG_NO_INTEL_SSE_3BPP" ./configure [options]
make
II. Using a custom makefile:
If you are using a custom makefile makefile, you will have to update it
manually to include contrib/intel/*.o in the dependencies, and to define
PNG_INTEL_SSE and possibly PNG_NO_INTEL_SSE_3BPP.
III. Using manually updated "configure" scripts:
If you prefer, manually edit configure.ac and Makefile.am, following the
instructions below, then follow the instructions in section II of INSTALL
in the main libpng directory, then configure libpng with -DPNG_INTEL_SSE
in CPPFLAGS. If you only want to optimize reading 4bpp images, also use
-DPNG_NO_INTEL_SSE_3BPP.
1. Insert the following lines above the copyright line near the top of
configure.ac:
-----------------cut----------------
# Copyright (c) 2016 Google, Inc.
# Written by Mike Klein and Matt Sarett
# Derived from the ARM supporting code in libpng/configure.ac, which was
-----------------cut----------------
2. Add the following code to configure.ac under HOST SPECIFIC OPTIONS
directly beneath the section for ARM:
-----------------cut----------------
# INTEL
# =====
#
# INTEL SSE (SIMD) support.
AC_ARG_ENABLE([intel-sse],
AS_HELP_STRING([[[--enable-intel-sse]]],
[Enable Intel SSE optimizations: =no/off, yes/on:]
[no/off: disable the optimizations;]
[yes/on: enable the optimizations.]
[If not specified: determined by the compiler.]),
[case "$enableval" in
no|off)
# disable the default enabling:
AC_DEFINE([PNG_INTEL_SSE_OPT], [0],
[Disable Intel SSE optimizations])
# Prevent inclusion of the assembler files below:
enable_intel_sse=no;;
yes|on)
AC_DEFINE([PNG_INTEL_SSE_OPT], [1],
[Enable Intel SSE optimizations]);;
*)
AC_MSG_ERROR([--enable-intel-sse=${enable_intel_sse}: invalid value])
esac])
# Add Intel specific files to all builds where the host_cpu is Intel ('x86*')
# or where Intel optimizations were explicitly requested (this allows a
# fallback if a future host CPU does not match 'x86*')
AM_CONDITIONAL([PNG_INTEL_SSE],
[test "$enable_intel_sse" != 'no' &&
case "$host_cpu" in
i?86|x86_64) :;;
*) test "$enable_intel_sse" != '';;
esac])
-----------------cut----------------
3. Insert the following lines above the copyright line near the top of
Makefile.am:
-----------------cut----------------
# Copyright (c) 2016 Google, Inc.
# Written by Mike Klein and Matt Sarett
# Derived from the ARM supporting code in libpng/configure.ac, which was
-----------------cut----------------
4. Add the following code to Makefile.am under HOST SPECIFIC OPTIONS
directly beneath the "if PNG_ARM_NEON ... endif" statement:
-----------------cut----------------
if PNG_INTEL_SSE
libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += contrib/intel/intel_init.c\
contrib/intel/filter_sse2_intrinsics.c
endif
-----------------cut----------------