libpng/png.c
John Bowler 14d0ca620e [libpng16] Cleaned up and corrected ICC profile handling.
contrib/libtests/makepng: corrected 'rgb' and 'gray' cases.  profile_error
    messages could be truncated; made a correct buffer size calculation and
    adjusted pngerror.c appropriately. png_icc_check_* checking improved;
    changed the functions to receive the correct color type of the PNG on read
    or write and check that it matches the color space of the profile (despite
    what the comments said before, there is danger in assuming the app will
    cope correctly with an RGB profile on a grayscale image and, since it
    violates the PNG spec, allowing it is certain to produce inconsistent
    app behavior and might even cause app crashes.) Check that profiles
    contain the tags needed to process the PNG (tags all required by the ICC
    spec). Removed unused PNG_STATIC from pngpriv.h.
2012-08-25 16:21:46 -05:00

4320 lines
142 KiB
C

/* png.c - location for general purpose libpng functions
*
* Last changed in libpng 1.6.0 [(PENDING RELEASE)]
* Copyright (c) 1998-2012 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
* This code is released under the libpng license.
* For conditions of distribution and use, see the disclaimer
* and license in png.h
*/
#include "pngpriv.h"
/* Generate a compiler error if there is an old png.h in the search path. */
typedef png_libpng_version_1_6_0beta28 Your_png_h_is_not_version_1_6_0beta28;
/* Tells libpng that we have already handled the first "num_bytes" bytes
* of the PNG file signature. If the PNG data is embedded into another
* stream we can set num_bytes = 8 so that libpng will not attempt to read
* or write any of the magic bytes before it starts on the IHDR.
*/
#ifdef PNG_READ_SUPPORTED
void PNGAPI
png_set_sig_bytes(png_structrp png_ptr, int num_bytes)
{
png_debug(1, "in png_set_sig_bytes");
if (png_ptr == NULL)
return;
if (num_bytes > 8)
png_error(png_ptr, "Too many bytes for PNG signature");
png_ptr->sig_bytes = (png_byte)(num_bytes < 0 ? 0 : num_bytes);
}
/* Checks whether the supplied bytes match the PNG signature. We allow
* checking less than the full 8-byte signature so that those apps that
* already read the first few bytes of a file to determine the file type
* can simply check the remaining bytes for extra assurance. Returns
* an integer less than, equal to, or greater than zero if sig is found,
* respectively, to be less than, to match, or be greater than the correct
* PNG signature (this is the same behavior as strcmp, memcmp, etc).
*/
int PNGAPI
png_sig_cmp(png_const_bytep sig, png_size_t start, png_size_t num_to_check)
{
png_byte png_signature[8] = {137, 80, 78, 71, 13, 10, 26, 10};
if (num_to_check > 8)
num_to_check = 8;
else if (num_to_check < 1)
return (-1);
if (start > 7)
return (-1);
if (start + num_to_check > 8)
num_to_check = 8 - start;
return ((int)(memcmp(&sig[start], &png_signature[start], num_to_check)));
}
#endif /* PNG_READ_SUPPORTED */
#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED)
/* Function to allocate memory for zlib */
PNG_FUNCTION(voidpf /* PRIVATE */,
png_zalloc,(voidpf png_ptr, uInt items, uInt size),PNG_ALLOCATED)
{
png_alloc_size_t num_bytes = size;
if (png_ptr == NULL)
return NULL;
if (items >= (~(png_alloc_size_t)0)/size)
{
png_warning (png_voidcast(png_structrp, png_ptr),
"Potential overflow in png_zalloc()");
return NULL;
}
num_bytes *= items;
return png_malloc_warn(png_voidcast(png_structrp, png_ptr), num_bytes);
}
/* Function to free memory for zlib */
void /* PRIVATE */
png_zfree(voidpf png_ptr, voidpf ptr)
{
png_free(png_voidcast(png_const_structrp,png_ptr), ptr);
}
/* Reset the CRC variable to 32 bits of 1's. Care must be taken
* in case CRC is > 32 bits to leave the top bits 0.
*/
void /* PRIVATE */
png_reset_crc(png_structrp png_ptr)
{
/* The cast is safe because the crc is a 32 bit value. */
png_ptr->crc = (png_uint_32)crc32(0, Z_NULL, 0);
}
/* Calculate the CRC over a section of data. We can only pass as
* much data to this routine as the largest single buffer size. We
* also check that this data will actually be used before going to the
* trouble of calculating it.
*/
void /* PRIVATE */
png_calculate_crc(png_structrp png_ptr, png_const_bytep ptr, png_size_t length)
{
int need_crc = 1;
if (PNG_CHUNK_ANCILLIARY(png_ptr->chunk_name))
{
if ((png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_MASK) ==
(PNG_FLAG_CRC_ANCILLARY_USE | PNG_FLAG_CRC_ANCILLARY_NOWARN))
need_crc = 0;
}
else /* critical */
{
if (png_ptr->flags & PNG_FLAG_CRC_CRITICAL_IGNORE)
need_crc = 0;
}
/* 'uLong' is defined as unsigned long, this means that on some systems it is
* a 64 bit value. crc32, however, returns 32 bits so the following cast is
* safe. 'uInt' may be no more than 16 bits, so it is necessary to perform a
* loop here.
*/
if (need_crc && length > 0)
{
uLong crc = png_ptr->crc; /* Should never issue a warning */
do
{
uInt safe_length = (uInt)length;
if (safe_length == 0)
safe_length = (uInt)-1; /* evil, but safe */
crc = crc32(crc, ptr, safe_length);
/* The following should never issue compiler warnings, if they do the
* target system has characteristics that will probably violate other
* assumptions within the libpng code.
*/
ptr += safe_length;
length -= safe_length;
}
while (length > 0);
/* And the following is always safe because the crc is only 32 bits. */
png_ptr->crc = (png_uint_32)crc;
}
}
/* Check a user supplied version number, called from both read and write
* functions that create a png_struct
*/
int
png_user_version_check(png_structrp png_ptr, png_const_charp user_png_ver)
{
if (user_png_ver)
{
int i = 0;
do
{
if (user_png_ver[i] != png_libpng_ver[i])
png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH;
} while (png_libpng_ver[i++]);
}
else
png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH;
if (png_ptr->flags & PNG_FLAG_LIBRARY_MISMATCH)
{
/* Libpng 0.90 and later are binary incompatible with libpng 0.89, so
* we must recompile any applications that use any older library version.
* For versions after libpng 1.0, we will be compatible, so we need
* only check the first digit.
*/
if (user_png_ver == NULL || user_png_ver[0] != png_libpng_ver[0] ||
(user_png_ver[0] == '1' && user_png_ver[2] != png_libpng_ver[2]) ||
(user_png_ver[0] == '0' && user_png_ver[2] < '9'))
{
#ifdef PNG_WARNINGS_SUPPORTED
size_t pos = 0;
char m[128];
pos = png_safecat(m, (sizeof m), pos,
"Application built with libpng-");
pos = png_safecat(m, (sizeof m), pos, user_png_ver);
pos = png_safecat(m, (sizeof m), pos, " but running with ");
pos = png_safecat(m, (sizeof m), pos, png_libpng_ver);
png_warning(png_ptr, m);
#endif
#ifdef PNG_ERROR_NUMBERS_SUPPORTED
png_ptr->flags = 0;
#endif
return 0;
}
}
/* Success return. */
return 1;
}
/* Generic function to create a png_struct for either read or write - this
* contains the common initialization.
*/
PNG_FUNCTION(png_structp /* PRIVATE */,
png_create_png_struct,(png_const_charp user_png_ver, png_voidp error_ptr,
png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr,
png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED)
{
png_struct create_struct;
# ifdef PNG_SETJMP_SUPPORTED
jmp_buf create_jmp_buf;
# endif
/* This temporary stack-allocated structure is used to provide a place to
* build enough context to allow the user provided memory allocator (if any)
* to be called.
*/
memset(&create_struct, 0, (sizeof create_struct));
/* Added at libpng-1.2.6 */
# ifdef PNG_USER_LIMITS_SUPPORTED
create_struct.user_width_max = PNG_USER_WIDTH_MAX;
create_struct.user_height_max = PNG_USER_HEIGHT_MAX;
# ifdef PNG_USER_CHUNK_CACHE_MAX
/* Added at libpng-1.2.43 and 1.4.0 */
create_struct.user_chunk_cache_max = PNG_USER_CHUNK_CACHE_MAX;
# endif
# ifdef PNG_SET_USER_CHUNK_MALLOC_MAX
/* Added at libpng-1.2.43 and 1.4.1, required only for read but exists
* in png_struct regardless.
*/
create_struct.user_chunk_malloc_max = PNG_USER_CHUNK_MALLOC_MAX;
# endif
# endif
/* The following two API calls simply set fields in png_struct, so it is safe
* to do them now even though error handling is not yet set up.
*/
# ifdef PNG_USER_MEM_SUPPORTED
png_set_mem_fn(&create_struct, mem_ptr, malloc_fn, free_fn);
# endif
/* (*error_fn) can return control to the caller after the error_ptr is set,
* this will result in a memory leak unless the error_fn does something
* extremely sophisticated. The design lacks merit but is implicit in the
* API.
*/
png_set_error_fn(&create_struct, error_ptr, error_fn, warn_fn);
# ifdef PNG_SETJMP_SUPPORTED
if (!setjmp(create_jmp_buf))
{
/* Temporarily fake out the longjmp information until we have
* successfully completed this function. This only works if we have
* setjmp() support compiled in, but it is safe - this stuff should
* never happen.
*/
create_struct.jmp_buf_ptr = &create_jmp_buf;
create_struct.jmp_buf_size = 0; /*stack allocation*/
create_struct.longjmp_fn = longjmp;
# else
{
# endif
/* Call the general version checker (shared with read and write code):
*/
if (png_user_version_check(&create_struct, user_png_ver))
{
png_structrp png_ptr = png_voidcast(png_structrp,
png_malloc_warn(&create_struct, (sizeof *png_ptr)));
if (png_ptr != NULL)
{
/* png_ptr->zstream holds a back-pointer to the png_struct, so
* this can only be done now:
*/
create_struct.zstream.zalloc = png_zalloc;
create_struct.zstream.zfree = png_zfree;
create_struct.zstream.opaque = png_ptr;
# ifdef PNG_SETJMP_SUPPORTED
/* Eliminate the local error handling: */
create_struct.jmp_buf_ptr = NULL;
create_struct.jmp_buf_size = 0;
create_struct.longjmp_fn = 0;
# endif
*png_ptr = create_struct;
/* This is the successful return point */
return png_ptr;
}
}
}
/* A longjmp because of a bug in the application storage allocator or a
* simple failure to allocate the png_struct.
*/
return NULL;
}
/* Allocate the memory for an info_struct for the application. */
PNG_FUNCTION(png_infop,PNGAPI
png_create_info_struct,(png_const_structrp png_ptr),PNG_ALLOCATED)
{
png_inforp info_ptr;
png_debug(1, "in png_create_info_struct");
if (png_ptr == NULL)
return NULL;
/* Use the internal API that does not (or at least should not) error out, so
* that this call always returns ok. The application typically sets up the
* error handling *after* creating the info_struct because this is the way it
* has always been done in 'example.c'.
*/
info_ptr = png_voidcast(png_inforp, png_malloc_base(png_ptr,
(sizeof *info_ptr)));
if (info_ptr != NULL)
memset(info_ptr, 0, (sizeof *info_ptr));
return info_ptr;
}
/* This function frees the memory associated with a single info struct.
* Normally, one would use either png_destroy_read_struct() or
* png_destroy_write_struct() to free an info struct, but this may be
* useful for some applications. From libpng 1.6.0 this function is also used
* internally to implement the png_info release part of the 'struct' destroy
* APIs. This ensures that all possible approaches free the same data (all of
* it).
*/
void PNGAPI
png_destroy_info_struct(png_const_structrp png_ptr, png_infopp info_ptr_ptr)
{
png_inforp info_ptr = NULL;
png_debug(1, "in png_destroy_info_struct");
if (png_ptr == NULL)
return;
if (info_ptr_ptr != NULL)
info_ptr = *info_ptr_ptr;
if (info_ptr != NULL)
{
/* Do this first in case of an error below; if the app implements its own
* memory management this can lead to png_free calling png_error, which
* will abort this routine and return control to the app error handler.
* An infinite loop may result if it then tries to free the same info
* ptr.
*/
*info_ptr_ptr = NULL;
png_free_data(png_ptr, info_ptr, PNG_FREE_ALL, -1);
memset(info_ptr, 0, (sizeof *info_ptr));
png_free(png_ptr, info_ptr);
}
}
/* Initialize the info structure. This is now an internal function (0.89)
* and applications using it are urged to use png_create_info_struct()
* instead. Use deprecated in 1.6.0, internal use removed (used internally it
* is just a memset).
*
* NOTE: it is almost inconceivable that this API is used because it bypasses
* the user-memory mechanism and the user error handling/warning mechanisms in
* those cases where it does anything other than a memset.
*/
PNG_FUNCTION(void,PNGAPI
png_info_init_3,(png_infopp ptr_ptr, png_size_t png_info_struct_size),
PNG_DEPRECATED)
{
png_inforp info_ptr = *ptr_ptr;
png_debug(1, "in png_info_init_3");
if (info_ptr == NULL)
return;
if ((sizeof (png_info)) > png_info_struct_size)
{
*ptr_ptr = NULL;
/* The following line is why this API should not be used: */
free(info_ptr);
info_ptr = png_voidcast(png_inforp, png_malloc_base(NULL,
(sizeof *info_ptr)));
*ptr_ptr = info_ptr;
}
/* Set everything to 0 */
memset(info_ptr, 0, (sizeof *info_ptr));
}
/* The following API is not called internally */
void PNGAPI
png_data_freer(png_const_structrp png_ptr, png_inforp info_ptr,
int freer, png_uint_32 mask)
{
png_debug(1, "in png_data_freer");
if (png_ptr == NULL || info_ptr == NULL)
return;
if (freer == PNG_DESTROY_WILL_FREE_DATA)
info_ptr->free_me |= mask;
else if (freer == PNG_USER_WILL_FREE_DATA)
info_ptr->free_me &= ~mask;
else
png_error(png_ptr, "Unknown freer parameter in png_data_freer");
}
void PNGAPI
png_free_data(png_const_structrp png_ptr, png_inforp info_ptr, png_uint_32 mask,
int num)
{
png_debug(1, "in png_free_data");
if (png_ptr == NULL || info_ptr == NULL)
return;
#ifdef PNG_TEXT_SUPPORTED
/* Free text item num or (if num == -1) all text items */
if ((mask & PNG_FREE_TEXT) & info_ptr->free_me)
{
if (num != -1)
{
if (info_ptr->text && info_ptr->text[num].key)
{
png_free(png_ptr, info_ptr->text[num].key);
info_ptr->text[num].key = NULL;
}
}
else
{
int i;
for (i = 0; i < info_ptr->num_text; i++)
png_free_data(png_ptr, info_ptr, PNG_FREE_TEXT, i);
png_free(png_ptr, info_ptr->text);
info_ptr->text = NULL;
info_ptr->num_text=0;
}
}
#endif
#ifdef PNG_tRNS_SUPPORTED
/* Free any tRNS entry */
if ((mask & PNG_FREE_TRNS) & info_ptr->free_me)
{
png_free(png_ptr, info_ptr->trans_alpha);
info_ptr->trans_alpha = NULL;
info_ptr->valid &= ~PNG_INFO_tRNS;
}
#endif
#ifdef PNG_sCAL_SUPPORTED
/* Free any sCAL entry */
if ((mask & PNG_FREE_SCAL) & info_ptr->free_me)
{
png_free(png_ptr, info_ptr->scal_s_width);
png_free(png_ptr, info_ptr->scal_s_height);
info_ptr->scal_s_width = NULL;
info_ptr->scal_s_height = NULL;
info_ptr->valid &= ~PNG_INFO_sCAL;
}
#endif
#ifdef PNG_pCAL_SUPPORTED
/* Free any pCAL entry */
if ((mask & PNG_FREE_PCAL) & info_ptr->free_me)
{
png_free(png_ptr, info_ptr->pcal_purpose);
png_free(png_ptr, info_ptr->pcal_units);
info_ptr->pcal_purpose = NULL;
info_ptr->pcal_units = NULL;
if (info_ptr->pcal_params != NULL)
{
int i;
for (i = 0; i < (int)info_ptr->pcal_nparams; i++)
{
png_free(png_ptr, info_ptr->pcal_params[i]);
info_ptr->pcal_params[i] = NULL;
}
png_free(png_ptr, info_ptr->pcal_params);
info_ptr->pcal_params = NULL;
}
info_ptr->valid &= ~PNG_INFO_pCAL;
}
#endif
#ifdef PNG_iCCP_SUPPORTED
/* Free any profile entry */
if ((mask & PNG_FREE_ICCP) & info_ptr->free_me)
{
png_free(png_ptr, info_ptr->iccp_name);
png_free(png_ptr, info_ptr->iccp_profile);
info_ptr->iccp_name = NULL;
info_ptr->iccp_profile = NULL;
info_ptr->valid &= ~PNG_INFO_iCCP;
}
#endif
#ifdef PNG_sPLT_SUPPORTED
/* Free a given sPLT entry, or (if num == -1) all sPLT entries */
if ((mask & PNG_FREE_SPLT) & info_ptr->free_me)
{
if (num != -1)
{
if (info_ptr->splt_palettes)
{
png_free(png_ptr, info_ptr->splt_palettes[num].name);
png_free(png_ptr, info_ptr->splt_palettes[num].entries);
info_ptr->splt_palettes[num].name = NULL;
info_ptr->splt_palettes[num].entries = NULL;
}
}
else
{
if (info_ptr->splt_palettes_num)
{
int i;
for (i = 0; i < (int)info_ptr->splt_palettes_num; i++)
png_free_data(png_ptr, info_ptr, PNG_FREE_SPLT, i);
png_free(png_ptr, info_ptr->splt_palettes);
info_ptr->splt_palettes = NULL;
info_ptr->splt_palettes_num = 0;
}
info_ptr->valid &= ~PNG_INFO_sPLT;
}
}
#endif
#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED
if ((mask & PNG_FREE_UNKN) & info_ptr->free_me)
{
if (num != -1)
{
if (info_ptr->unknown_chunks)
{
png_free(png_ptr, info_ptr->unknown_chunks[num].data);
info_ptr->unknown_chunks[num].data = NULL;
}
}
else
{
unsigned int i;
if (info_ptr->unknown_chunks_num)
{
for (i = 0; i < info_ptr->unknown_chunks_num; i++)
png_free_data(png_ptr, info_ptr, PNG_FREE_UNKN, i);
png_free(png_ptr, info_ptr->unknown_chunks);
info_ptr->unknown_chunks = NULL;
info_ptr->unknown_chunks_num = 0;
}
}
}
#endif
#ifdef PNG_hIST_SUPPORTED
/* Free any hIST entry */
if ((mask & PNG_FREE_HIST) & info_ptr->free_me)
{
png_free(png_ptr, info_ptr->hist);
info_ptr->hist = NULL;
info_ptr->valid &= ~PNG_INFO_hIST;
}
#endif
/* Free any PLTE entry that was internally allocated */
if ((mask & PNG_FREE_PLTE) & info_ptr->free_me)
{
png_free(png_ptr, info_ptr->palette);
info_ptr->palette = NULL;
info_ptr->valid &= ~PNG_INFO_PLTE;
info_ptr->num_palette = 0;
}
#ifdef PNG_INFO_IMAGE_SUPPORTED
/* Free any image bits attached to the info structure */
if ((mask & PNG_FREE_ROWS) & info_ptr->free_me)
{
if (info_ptr->row_pointers)
{
int row;
for (row = 0; row < (int)info_ptr->height; row++)
{
png_free(png_ptr, info_ptr->row_pointers[row]);
info_ptr->row_pointers[row] = NULL;
}
png_free(png_ptr, info_ptr->row_pointers);
info_ptr->row_pointers = NULL;
}
info_ptr->valid &= ~PNG_INFO_IDAT;
}
#endif
if (num != -1)
mask &= ~PNG_FREE_MUL;
info_ptr->free_me &= ~mask;
}
#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */
/* This function returns a pointer to the io_ptr associated with the user
* functions. The application should free any memory associated with this
* pointer before png_write_destroy() or png_read_destroy() are called.
*/
png_voidp PNGAPI
png_get_io_ptr(png_const_structrp png_ptr)
{
if (png_ptr == NULL)
return (NULL);
return (png_ptr->io_ptr);
}
#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED)
# ifdef PNG_STDIO_SUPPORTED
/* Initialize the default input/output functions for the PNG file. If you
* use your own read or write routines, you can call either png_set_read_fn()
* or png_set_write_fn() instead of png_init_io(). If you have defined
* PNG_NO_STDIO or otherwise disabled PNG_STDIO_SUPPORTED, you must use a
* function of your own because "FILE *" isn't necessarily available.
*/
void PNGAPI
png_init_io(png_structrp png_ptr, png_FILE_p fp)
{
png_debug(1, "in png_init_io");
if (png_ptr == NULL)
return;
png_ptr->io_ptr = (png_voidp)fp;
}
# endif
# ifdef PNG_TIME_RFC1123_SUPPORTED
/* Convert the supplied time into an RFC 1123 string suitable for use in
* a "Creation Time" or other text-based time string.
*/
int PNGAPI
png_convert_to_rfc1123_buffer(char out[29], png_const_timep ptime)
{
static PNG_CONST char short_months[12][4] =
{"Jan", "Feb", "Mar", "Apr", "May", "Jun",
"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
if (out == NULL)
return 0;
if (ptime->year > 9999 /* RFC1123 limitation */ ||
ptime->month == 0 || ptime->month > 12 ||
ptime->day == 0 || ptime->day > 31 ||
ptime->hour > 23 || ptime->minute > 59 ||
ptime->second > 60)
return 0;
{
size_t pos = 0;
char number_buf[5]; /* enough for a four-digit year */
# define APPEND_STRING(string) pos = png_safecat(out, 29, pos, (string))
# define APPEND_NUMBER(format, value)\
APPEND_STRING(PNG_FORMAT_NUMBER(number_buf, format, (value)))
# define APPEND(ch) if (pos < 28) out[pos++] = (ch)
APPEND_NUMBER(PNG_NUMBER_FORMAT_u, (unsigned)ptime->day);
APPEND(' ');
APPEND_STRING(short_months[(ptime->month - 1)]);
APPEND(' ');
APPEND_NUMBER(PNG_NUMBER_FORMAT_u, ptime->year);
APPEND(' ');
APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->hour);
APPEND(':');
APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->minute);
APPEND(':');
APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->second);
APPEND_STRING(" +0000"); /* This reliably terminates the buffer */
# undef APPEND
# undef APPEND_NUMBER
# undef APPEND_STRING
}
return 1;
}
# if PNG_LIBPNG_VER < 10700
/* To do: remove the following from libpng-1.7 */
/* Original API that uses a private buffer in png_struct.
* Deprecated because it causes png_struct to carry a spurious temporary
* buffer (png_struct::time_buffer), better to have the caller pass this in.
*/
png_const_charp PNGAPI
png_convert_to_rfc1123(png_structrp png_ptr, png_const_timep ptime)
{
if (png_ptr != NULL)
{
/* The only failure above if png_ptr != NULL is from an invalid ptime */
if (!png_convert_to_rfc1123_buffer(png_ptr->time_buffer, ptime))
png_warning(png_ptr, "Ignoring invalid time value");
else
return png_ptr->time_buffer;
}
return NULL;
}
# endif
# endif /* PNG_TIME_RFC1123_SUPPORTED */
#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */
png_const_charp PNGAPI
png_get_copyright(png_const_structrp png_ptr)
{
PNG_UNUSED(png_ptr) /* Silence compiler warning about unused png_ptr */
#ifdef PNG_STRING_COPYRIGHT
return PNG_STRING_COPYRIGHT
#else
# ifdef __STDC__
return PNG_STRING_NEWLINE \
"libpng version 1.6.0beta28 - August 25, 2012" PNG_STRING_NEWLINE \
"Copyright (c) 1998-2012 Glenn Randers-Pehrson" PNG_STRING_NEWLINE \
"Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \
"Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \
PNG_STRING_NEWLINE;
# else
return "libpng version 1.6.0beta28 - August 25, 2012\
Copyright (c) 1998-2012 Glenn Randers-Pehrson\
Copyright (c) 1996-1997 Andreas Dilger\
Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.";
# endif
#endif
}
/* The following return the library version as a short string in the
* format 1.0.0 through 99.99.99zz. To get the version of *.h files
* used with your application, print out PNG_LIBPNG_VER_STRING, which
* is defined in png.h.
* Note: now there is no difference between png_get_libpng_ver() and
* png_get_header_ver(). Due to the version_nn_nn_nn typedef guard,
* it is guaranteed that png.c uses the correct version of png.h.
*/
png_const_charp PNGAPI
png_get_libpng_ver(png_const_structrp png_ptr)
{
/* Version of *.c files used when building libpng */
return png_get_header_ver(png_ptr);
}
png_const_charp PNGAPI
png_get_header_ver(png_const_structrp png_ptr)
{
/* Version of *.h files used when building libpng */
PNG_UNUSED(png_ptr) /* Silence compiler warning about unused png_ptr */
return PNG_LIBPNG_VER_STRING;
}
png_const_charp PNGAPI
png_get_header_version(png_const_structrp png_ptr)
{
/* Returns longer string containing both version and date */
PNG_UNUSED(png_ptr) /* Silence compiler warning about unused png_ptr */
#ifdef __STDC__
return PNG_HEADER_VERSION_STRING
# ifndef PNG_READ_SUPPORTED
" (NO READ SUPPORT)"
# endif
PNG_STRING_NEWLINE;
#else
return PNG_HEADER_VERSION_STRING;
#endif
}
#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED
int PNGAPI
png_handle_as_unknown(png_const_structrp png_ptr, png_const_bytep chunk_name)
{
/* Check chunk_name and return "keep" value if it's on the list, else 0 */
png_const_bytep p, p_end;
if (png_ptr == NULL || chunk_name == NULL || png_ptr->num_chunk_list == 0)
return PNG_HANDLE_CHUNK_AS_DEFAULT;
p_end = png_ptr->chunk_list;
p = p_end + png_ptr->num_chunk_list*5; /* beyond end */
/* The code is the fifth byte after each four byte string. Historically this
* code was always searched from the end of the list, this is no longer
* necessary because the 'set' routine handles duplicate entries correcty.
*/
do /* num_chunk_list > 0, so at least one */
{
p -= 5;
if (!memcmp(chunk_name, p, 4))
return p[4];
}
while (p > p_end);
/* This means that known chunks should be processed and unknown chunks should
* be handled according to the value of png_ptr->unknown_default; this can be
* confusing because, as a result, there are two levels of defaulting for
* unknown chunks.
*/
return PNG_HANDLE_CHUNK_AS_DEFAULT;
}
#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED
int /* PRIVATE */
png_chunk_unknown_handling(png_const_structrp png_ptr, png_uint_32 chunk_name)
{
png_byte chunk_string[5];
PNG_CSTRING_FROM_CHUNK(chunk_string, chunk_name);
return png_handle_as_unknown(png_ptr, chunk_string);
}
#endif /* READ_UNKNOWN_CHUNKS */
#endif /* SET_UNKNOWN_CHUNKS */
#ifdef PNG_READ_SUPPORTED
/* This function, added to libpng-1.0.6g, is untested. */
int PNGAPI
png_reset_zstream(png_structrp png_ptr)
{
if (png_ptr == NULL)
return Z_STREAM_ERROR;
/* WARNING: this resets the window bits to the maximum! */
return (inflateReset(&png_ptr->zstream));
}
#endif /* PNG_READ_SUPPORTED */
/* This function was added to libpng-1.0.7 */
png_uint_32 PNGAPI
png_access_version_number(void)
{
/* Version of *.c files used when building libpng */
return((png_uint_32)PNG_LIBPNG_VER);
}
#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED)
/* Ensure that png_ptr->zstream.msg holds some appropriate error message string.
* If it doesn't 'ret' is used to set it to something appropriate, even in cases
* like Z_OK or Z_STREAM_END where the error code is apparently a success code.
*/
void /* PRIVATE */
png_zstream_error(png_structrp png_ptr, int ret)
{
/* Translate 'ret' into an appropriate error string, priority is given to the
* one in zstream if set. This always returns a string, even in cases like
* Z_OK or Z_STREAM_END where the error code is a success code.
*/
if (png_ptr->zstream.msg == NULL) switch (ret)
{
default:
case Z_OK:
png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return code");
break;
case Z_STREAM_END:
/* Normal exit */
png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected end of LZ stream");
break;
case Z_NEED_DICT:
/* This means the deflate stream did not have a dictionary; this
* indicates a bogus PNG.
*/
png_ptr->zstream.msg = PNGZ_MSG_CAST("missing LZ dictionary");
break;
case Z_ERRNO:
/* gz APIs only: should not happen */
png_ptr->zstream.msg = PNGZ_MSG_CAST("zlib IO error");
break;
case Z_STREAM_ERROR:
/* internal libpng error */
png_ptr->zstream.msg = PNGZ_MSG_CAST("bad parameters to zlib");
break;
case Z_DATA_ERROR:
png_ptr->zstream.msg = PNGZ_MSG_CAST("damaged LZ stream");
break;
case Z_MEM_ERROR:
png_ptr->zstream.msg = PNGZ_MSG_CAST("insufficient memory");
break;
case Z_BUF_ERROR:
/* End of input or output; not a problem if the caller is doing
* incremental read or write.
*/
png_ptr->zstream.msg = PNGZ_MSG_CAST("truncated");
break;
case Z_VERSION_ERROR:
png_ptr->zstream.msg = PNGZ_MSG_CAST("unsupported zlib version");
break;
case PNG_UNEXPECTED_ZLIB_RETURN:
/* Compile errors here mean that zlib now uses the value co-opted in
* pngpriv.h for PNG_UNEXPECTED_ZLIB_RETURN; update the switch above
* and change pngpriv.h. Note that this message is "... return",
* whereas the default/Z_OK one is "... return code".
*/
png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return");
break;
}
}
/* png_convert_size: a PNGAPI but no longer in png.h, so deleted
* at libpng 1.5.5!
*/
/* Added at libpng version 1.2.34 and 1.4.0 (moved from pngset.c) */
#ifdef PNG_GAMMA_SUPPORTED /* always set if COLORSPACE */
static int
png_colorspace_check_gamma(png_const_structrp png_ptr,
png_colorspacerp colorspace, png_fixed_point gAMA, int preferred)
{
/* The 'invalid' flag needs to be sticky, doing things this way avoids having
* many messages caused by just one invalid colorspace chunk.
*/
if (colorspace->flags & PNG_COLORSPACE_INVALID)
return 0;
if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_GAMMA))
{
png_fixed_point gtest;
if (!png_muldiv(&gtest, colorspace->gamma, PNG_FP_1, gAMA) ||
png_gamma_significant(gtest))
{
colorspace->flags |= PNG_COLORSPACE_INVALID;
png_benign_error(png_ptr, "inconsistent gamma values");
return 0; /* failed */
}
else if (!preferred)
return 1; /* ok, use existing gamma */
}
return 2; /* ok, write gamma */
}
int /* PRIVATE */
png_colorspace_set_gamma(png_const_structrp png_ptr,
png_colorspacerp colorspace, png_fixed_point gAMA, int preferred)
{
int result = png_colorspace_check_gamma(png_ptr, colorspace, gAMA,
preferred);
if (result == 2)
{
colorspace->gamma = gAMA;
colorspace->flags |= PNG_COLORSPACE_HAVE_GAMMA;
}
return result;
}
void /* PRIVATE */
png_colorspace_sync_info(png_const_structrp png_ptr, png_inforp info_ptr)
{
if (info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID)
{
/* Everything is invalid */
info_ptr->valid &= ~(PNG_INFO_gAMA|PNG_INFO_cHRM|PNG_INFO_sRGB|
PNG_INFO_iCCP);
# ifdef PNG_COLORSPACE_SUPPORTED
/* Clean up the iCCP profile now if it won't be used. */
png_free_data(png_ptr, info_ptr, PNG_FREE_ICCP, -1/*not used*/);
# else
PNG_UNUSED(png_ptr)
# endif
}
else
{
# ifdef PNG_COLORSPACE_SUPPORTED
/* Leave the INFO_iCCP flag set if the pngset.c code has already set
* it; this allows a PNG to contain a profile which matches sRGB and
* yet still have that profile retrievable by the application.
*/
if (info_ptr->colorspace.flags & PNG_COLORSPACE_MATCHES_sRGB)
info_ptr->valid |= PNG_INFO_sRGB;
else
info_ptr->valid &= ~PNG_INFO_sRGB;
if (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS)
info_ptr->valid |= PNG_INFO_cHRM;
else
info_ptr->valid &= ~PNG_INFO_cHRM;
# endif
if (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA)
info_ptr->valid |= PNG_INFO_gAMA;
else
info_ptr->valid &= ~PNG_INFO_gAMA;
}
}
#ifdef PNG_READ_SUPPORTED
void /* PRIVATE */
png_colorspace_sync(png_const_structrp png_ptr, png_inforp info_ptr)
{
if (info_ptr == NULL) /* reduce code size; check here not in the caller */
return;
info_ptr->colorspace = png_ptr->colorspace;
png_colorspace_sync_info(png_ptr, info_ptr);
}
#endif
#endif
#ifdef PNG_COLORSPACE_SUPPORTED
#if 0
/* Added at libpng version 1.2.34 (Dec 8, 2008) and 1.4.0 (Jan 2,
* 2010: moved from pngset.c) */
/*
* Multiply two 32-bit numbers, V1 and V2, using 32-bit
* arithmetic, to produce a 64-bit result in the HI/LO words.
*
* A B
* x C D
* ------
* AD || BD
* AC || CB || 0
*
* where A and B are the high and low 16-bit words of V1,
* C and D are the 16-bit words of V2, AD is the product of
* A and D, and X || Y is (X << 16) + Y.
*/
static void
png_64bit_product (long v1, long v2, unsigned long *hi_product,
unsigned long *lo_product)
{
int a, b, c, d;
long lo, hi, x, y;
a = (v1 >> 16) & 0xffff;
b = v1 & 0xffff;
c = (v2 >> 16) & 0xffff;
d = v2 & 0xffff;
lo = b * d; /* BD */
x = a * d + c * b; /* AD + CB */
y = ((lo >> 16) & 0xffff) + x;
lo = (lo & 0xffff) | ((y & 0xffff) << 16);
hi = (y >> 16) & 0xffff;
hi += a * c; /* AC */
*hi_product = (unsigned long)hi;
*lo_product = (unsigned long)lo;
}
static int
png_check_cHRM_fixed(png_const_structrp png_ptr,
png_fixed_point white_x, png_fixed_point white_y, png_fixed_point red_x,
png_fixed_point red_y, png_fixed_point green_x, png_fixed_point green_y,
png_fixed_point blue_x, png_fixed_point blue_y)
{
int ret = 1;
unsigned long xy_hi,xy_lo,yx_hi,yx_lo;
png_debug(1, "in function png_check_cHRM_fixed");
if (png_ptr == NULL)
return 0;
/* (x,y,z) values are first limited to 0..100000 (PNG_FP_1), the white
* y must also be greater than 0. To test for the upper limit calculate
* (PNG_FP_1-y) - x must be <= to this for z to be >= 0 (and the expression
* cannot overflow.) At this point we know x and y are >= 0 and (x+y) is
* <= PNG_FP_1. The previous test on PNG_MAX_UINT_31 is removed because it
* pointless (and it produces compiler warnings!)
*/
if (white_x < 0 || white_y <= 0 ||
red_x < 0 || red_y < 0 ||
green_x < 0 || green_y < 0 ||
blue_x < 0 || blue_y < 0)
{
png_warning(png_ptr,
"Ignoring attempt to set negative chromaticity value");
ret = 0;
}
/* And (x+y) must be <= PNG_FP_1 (so z is >= 0) */
if (white_x > PNG_FP_1 - white_y)
{
png_warning(png_ptr, "Invalid cHRM white point");
ret = 0;
}
if (red_x > PNG_FP_1 - red_y)
{
png_warning(png_ptr, "Invalid cHRM red point");
ret = 0;
}
if (green_x > PNG_FP_1 - green_y)
{
png_warning(png_ptr, "Invalid cHRM green point");
ret = 0;
}
if (blue_x > PNG_FP_1 - blue_y)
{
png_warning(png_ptr, "Invalid cHRM blue point");
ret = 0;
}
png_64bit_product(green_x - red_x, blue_y - red_y, &xy_hi, &xy_lo);
png_64bit_product(green_y - red_y, blue_x - red_x, &yx_hi, &yx_lo);
if (xy_hi == yx_hi && xy_lo == yx_lo)
{
png_warning(png_ptr,
"Ignoring attempt to set cHRM RGB triangle with zero area");
ret = 0;
}
return ret;
}
#endif /*0*/
/* Added at libpng-1.5.5 to support read and write of true CIEXYZ values for
* cHRM, as opposed to using chromaticities. These internal APIs return
* non-zero on a parameter error. The X, Y and Z values are required to be
* positive and less than 1.0.
*/
static int
png_xy_from_XYZ(png_xy *xy, const png_XYZ *XYZ)
{
png_int_32 d, dwhite, whiteX, whiteY;
d = XYZ->red_X + XYZ->red_Y + XYZ->red_Z;
if (!png_muldiv(&xy->redx, XYZ->red_X, PNG_FP_1, d)) return 1;
if (!png_muldiv(&xy->redy, XYZ->red_Y, PNG_FP_1, d)) return 1;
dwhite = d;
whiteX = XYZ->red_X;
whiteY = XYZ->red_Y;
d = XYZ->green_X + XYZ->green_Y + XYZ->green_Z;
if (!png_muldiv(&xy->greenx, XYZ->green_X, PNG_FP_1, d)) return 1;
if (!png_muldiv(&xy->greeny, XYZ->green_Y, PNG_FP_1, d)) return 1;
dwhite += d;
whiteX += XYZ->green_X;
whiteY += XYZ->green_Y;
d = XYZ->blue_X + XYZ->blue_Y + XYZ->blue_Z;
if (!png_muldiv(&xy->bluex, XYZ->blue_X, PNG_FP_1, d)) return 1;
if (!png_muldiv(&xy->bluey, XYZ->blue_Y, PNG_FP_1, d)) return 1;
dwhite += d;
whiteX += XYZ->blue_X;
whiteY += XYZ->blue_Y;
/* The reference white is simply the sum of the end-point (X,Y,Z) vectors,
* thus:
*/
if (!png_muldiv(&xy->whitex, whiteX, PNG_FP_1, dwhite)) return 1;
if (!png_muldiv(&xy->whitey, whiteY, PNG_FP_1, dwhite)) return 1;
return 0;
}
static int
png_XYZ_from_xy(png_XYZ *XYZ, const png_xy *xy)
{
png_fixed_point red_inverse, green_inverse, blue_scale;
png_fixed_point left, right, denominator;
/* Check xy and, implicitly, z. Note that wide gamut color spaces typically
* have end points with 0 tristimulus values (these are impossible end
* points, but they are used to cover the possible colors.)
*/
if (xy->redx < 0 || xy->redx > PNG_FP_1) return 1;
if (xy->redy < 0 || xy->redy > PNG_FP_1-xy->redx) return 1;
if (xy->greenx < 0 || xy->greenx > PNG_FP_1) return 1;
if (xy->greeny < 0 || xy->greeny > PNG_FP_1-xy->greenx) return 1;
if (xy->bluex < 0 || xy->bluex > PNG_FP_1) return 1;
if (xy->bluey < 0 || xy->bluey > PNG_FP_1-xy->bluex) return 1;
if (xy->whitex < 0 || xy->whitex > PNG_FP_1) return 1;
if (xy->whitey < 0 || xy->whitey > PNG_FP_1-xy->whitex) return 1;
/* The reverse calculation is more difficult because the original tristimulus
* value had 9 independent values (red,green,blue)x(X,Y,Z) however only 8
* derived values were recorded in the cHRM chunk;
* (red,green,blue,white)x(x,y). This loses one degree of freedom and
* therefore an arbitrary ninth value has to be introduced to undo the
* original transformations.
*
* Think of the original end-points as points in (X,Y,Z) space. The
* chromaticity values (c) have the property:
*
* C
* c = ---------
* X + Y + Z
*
* For each c (x,y,z) from the corresponding original C (X,Y,Z). Thus the
* three chromaticity values (x,y,z) for each end-point obey the
* relationship:
*
* x + y + z = 1
*
* This describes the plane in (X,Y,Z) space that intersects each axis at the
* value 1.0; call this the chromaticity plane. Thus the chromaticity
* calculation has scaled each end-point so that it is on the x+y+z=1 plane
* and chromaticity is the intersection of the vector from the origin to the
* (X,Y,Z) value with the chromaticity plane.
*
* To fully invert the chromaticity calculation we would need the three
* end-point scale factors, (red-scale, green-scale, blue-scale), but these
* were not recorded. Instead we calculated the reference white (X,Y,Z) and
* recorded the chromaticity of this. The reference white (X,Y,Z) would have
* given all three of the scale factors since:
*
* color-C = color-c * color-scale
* white-C = red-C + green-C + blue-C
* = red-c*red-scale + green-c*green-scale + blue-c*blue-scale
*
* But cHRM records only white-x and white-y, so we have lost the white scale
* factor:
*
* white-C = white-c*white-scale
*
* To handle this the inverse transformation makes an arbitrary assumption
* about white-scale:
*
* Assume: white-Y = 1.0
* Hence: white-scale = 1/white-y
* Or: red-Y + green-Y + blue-Y = 1.0
*
* Notice the last statement of the assumption gives an equation in three of
* the nine values we want to calculate. 8 more equations come from the
* above routine as summarised at the top above (the chromaticity
* calculation):
*
* Given: color-x = color-X / (color-X + color-Y + color-Z)
* Hence: (color-x - 1)*color-X + color.x*color-Y + color.x*color-Z = 0
*
* This is 9 simultaneous equations in the 9 variables "color-C" and can be
* solved by Cramer's rule. Cramer's rule requires calculating 10 9x9 matrix
* determinants, however this is not as bad as it seems because only 28 of
* the total of 90 terms in the various matrices are non-zero. Nevertheless
* Cramer's rule is notoriously numerically unstable because the determinant
* calculation involves the difference of large, but similar, numbers. It is
* difficult to be sure that the calculation is stable for real world values
* and it is certain that it becomes unstable where the end points are close
* together.
*
* So this code uses the perhaps slightly less optimal but more
* understandable and totally obvious approach of calculating color-scale.
*
* This algorithm depends on the precision in white-scale and that is
* (1/white-y), so we can immediately see that as white-y approaches 0 the
* accuracy inherent in the cHRM chunk drops off substantially.
*
* libpng arithmetic: a simple invertion of the above equations
* ------------------------------------------------------------
*
* white_scale = 1/white-y
* white-X = white-x * white-scale
* white-Y = 1.0
* white-Z = (1 - white-x - white-y) * white_scale
*
* white-C = red-C + green-C + blue-C
* = red-c*red-scale + green-c*green-scale + blue-c*blue-scale
*
* This gives us three equations in (red-scale,green-scale,blue-scale) where
* all the coefficients are now known:
*
* red-x*red-scale + green-x*green-scale + blue-x*blue-scale
* = white-x/white-y
* red-y*red-scale + green-y*green-scale + blue-y*blue-scale = 1
* red-z*red-scale + green-z*green-scale + blue-z*blue-scale
* = (1 - white-x - white-y)/white-y
*
* In the last equation color-z is (1 - color-x - color-y) so we can add all
* three equations together to get an alternative third:
*
* red-scale + green-scale + blue-scale = 1/white-y = white-scale
*
* So now we have a Cramer's rule solution where the determinants are just
* 3x3 - far more tractible. Unfortunately 3x3 determinants still involve
* multiplication of three coefficients so we can't guarantee to avoid
* overflow in the libpng fixed point representation. Using Cramer's rule in
* floating point is probably a good choice here, but it's not an option for
* fixed point. Instead proceed to simplify the first two equations by
* eliminating what is likely to be the largest value, blue-scale:
*
* blue-scale = white-scale - red-scale - green-scale
*
* Hence:
*
* (red-x - blue-x)*red-scale + (green-x - blue-x)*green-scale =
* (white-x - blue-x)*white-scale
*
* (red-y - blue-y)*red-scale + (green-y - blue-y)*green-scale =
* 1 - blue-y*white-scale
*
* And now we can trivially solve for (red-scale,green-scale):
*
* green-scale =
* (white-x - blue-x)*white-scale - (red-x - blue-x)*red-scale
* -----------------------------------------------------------
* green-x - blue-x
*
* red-scale =
* 1 - blue-y*white-scale - (green-y - blue-y) * green-scale
* ---------------------------------------------------------
* red-y - blue-y
*
* Hence:
*
* red-scale =
* ( (green-x - blue-x) * (white-y - blue-y) -
* (green-y - blue-y) * (white-x - blue-x) ) / white-y
* -------------------------------------------------------------------------
* (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x)
*
* green-scale =
* ( (red-y - blue-y) * (white-x - blue-x) -
* (red-x - blue-x) * (white-y - blue-y) ) / white-y
* -------------------------------------------------------------------------
* (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x)
*
* Accuracy:
* The input values have 5 decimal digits of accuracy. The values are all in
* the range 0 < value < 1, so simple products are in the same range but may
* need up to 10 decimal digits to preserve the original precision and avoid
* underflow. Because we are using a 32-bit signed representation we cannot
* match this; the best is a little over 9 decimal digits, less than 10.
*
* The approach used here is to preserve the maximum precision within the
* signed representation. Because the red-scale calculation above uses the
* difference between two products of values that must be in the range -1..+1
* it is sufficient to divide the product by 7; ceil(100,000/32767*2). The
* factor is irrelevant in the calculation because it is applied to both
* numerator and denominator.
*
* Note that the values of the differences of the products of the
* chromaticities in the above equations tend to be small, for example for
* the sRGB chromaticities they are:
*
* red numerator: -0.04751
* green numerator: -0.08788
* denominator: -0.2241 (without white-y multiplication)
*
* The resultant Y coefficients from the chromaticities of some widely used
* color space definitions are (to 15 decimal places):
*
* sRGB
* 0.212639005871510 0.715168678767756 0.072192315360734
* Kodak ProPhoto
* 0.288071128229293 0.711843217810102 0.000085653960605
* Adobe RGB
* 0.297344975250536 0.627363566255466 0.075291458493998
* Adobe Wide Gamut RGB
* 0.258728243040113 0.724682314948566 0.016589442011321
*/
/* By the argument, above overflow should be impossible here. The return
* value of 2 indicates an internal error to the caller.
*/
if (!png_muldiv(&left, xy->greenx-xy->bluex, xy->redy - xy->bluey, 7))
return 2;
if (!png_muldiv(&right, xy->greeny-xy->bluey, xy->redx - xy->bluex, 7))
return 2;
denominator = left - right;
/* Now find the red numerator. */
if (!png_muldiv(&left, xy->greenx-xy->bluex, xy->whitey-xy->bluey, 7))
return 2;
if (!png_muldiv(&right, xy->greeny-xy->bluey, xy->whitex-xy->bluex, 7))
return 2;
/* Overflow is possible here and it indicates an extreme set of PNG cHRM
* chunk values. This calculation actually returns the reciprocal of the
* scale value because this allows us to delay the multiplication of white-y
* into the denominator, which tends to produce a small number.
*/
if (!png_muldiv(&red_inverse, xy->whitey, denominator, left-right) ||
red_inverse <= xy->whitey /* r+g+b scales = white scale */)
return 1;
/* Similarly for green_inverse: */
if (!png_muldiv(&left, xy->redy-xy->bluey, xy->whitex-xy->bluex, 7))
return 2;
if (!png_muldiv(&right, xy->redx-xy->bluex, xy->whitey-xy->bluey, 7))
return 2;
if (!png_muldiv(&green_inverse, xy->whitey, denominator, left-right) ||
green_inverse <= xy->whitey)
return 1;
/* And the blue scale, the checks above guarantee this can't overflow but it
* can still produce 0 for extreme cHRM values.
*/
blue_scale = png_reciprocal(xy->whitey) - png_reciprocal(red_inverse) -
png_reciprocal(green_inverse);
if (blue_scale <= 0) return 1;
/* And fill in the png_XYZ: */
if (!png_muldiv(&XYZ->red_X, xy->redx, PNG_FP_1, red_inverse)) return 1;
if (!png_muldiv(&XYZ->red_Y, xy->redy, PNG_FP_1, red_inverse)) return 1;
if (!png_muldiv(&XYZ->red_Z, PNG_FP_1 - xy->redx - xy->redy, PNG_FP_1,
red_inverse))
return 1;
if (!png_muldiv(&XYZ->green_X, xy->greenx, PNG_FP_1, green_inverse)) return 1;
if (!png_muldiv(&XYZ->green_Y, xy->greeny, PNG_FP_1, green_inverse)) return 1;
if (!png_muldiv(&XYZ->green_Z, PNG_FP_1 - xy->greenx - xy->greeny, PNG_FP_1,
green_inverse))
return 1;
if (!png_muldiv(&XYZ->blue_X, xy->bluex, blue_scale, PNG_FP_1)) return 1;
if (!png_muldiv(&XYZ->blue_Y, xy->bluey, blue_scale, PNG_FP_1)) return 1;
if (!png_muldiv(&XYZ->blue_Z, PNG_FP_1 - xy->bluex - xy->bluey, blue_scale,
PNG_FP_1))
return 1;
return 0; /*success*/
}
static int
png_XYZ_normalize(png_XYZ *XYZ)
{
png_int_32 Y;
if (XYZ->red_Y < 0 || XYZ->green_Y < 0 || XYZ->blue_Y < 0 ||
XYZ->red_X < 0 || XYZ->green_X < 0 || XYZ->blue_X < 0 ||
XYZ->red_Z < 0 || XYZ->green_Z < 0 || XYZ->blue_Z < 0)
return 1;
/* Normalize by scaling so the sum of the end-point Y values is PNG_FP_1.
* IMPLEMENTATION NOTE: ANSI requires signed overflow not to occur, therefore
* relying on addition of two positive values producing a negative one is not
* safe.
*/
Y = XYZ->red_Y;
if (0x7fffffff - Y < XYZ->green_X) return 1;
Y += XYZ->green_Y;
if (0x7fffffff - Y < XYZ->blue_X) return 1;
Y += XYZ->blue_Y;
if (Y != PNG_FP_1)
{
if (!png_muldiv(&XYZ->red_X, XYZ->red_X, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->red_Y, XYZ->red_Y, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->red_Z, XYZ->red_Z, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->green_X, XYZ->green_X, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->green_Y, XYZ->green_Y, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->green_Z, XYZ->green_Z, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->blue_X, XYZ->blue_X, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->blue_Y, XYZ->blue_Y, PNG_FP_1, Y)) return 1;
if (!png_muldiv(&XYZ->blue_Z, XYZ->blue_Z, PNG_FP_1, Y)) return 1;
}
return 0;
}
static int
png_colorspace_endpoints_match(const png_xy *xy1, const png_xy *xy2, int delta)
{
/* Allow an error of +/-0.01 (absolute value) on each chromaticity */
return !(PNG_OUT_OF_RANGE(xy1->whitex, xy2->whitex,delta) ||
PNG_OUT_OF_RANGE(xy1->whitey, xy2->whitey,delta) ||
PNG_OUT_OF_RANGE(xy1->redx, xy2->redx, delta) ||
PNG_OUT_OF_RANGE(xy1->redy, xy2->redy, delta) ||
PNG_OUT_OF_RANGE(xy1->greenx, xy2->greenx,delta) ||
PNG_OUT_OF_RANGE(xy1->greeny, xy2->greeny,delta) ||
PNG_OUT_OF_RANGE(xy1->bluex, xy2->bluex, delta) ||
PNG_OUT_OF_RANGE(xy1->bluey, xy2->bluey, delta));
}
/* Added in libpng-1.6.0, a different check for the validity of a set of cHRM
* chunk chromaticities. Earlier checks used to simply look for the overflow
* condition (where the determinant of the matrix to solve for XYZ ends up zero
* because the chromaticity values are not all distinct.) Despite this it is
* theoretically possible to produce chromaticities that are apparently valid
* but that rapidly degrade to invalid, potentially crashing, sets because of
* arithmetic inaccuracies when calculations are performed on them. The new
* check is to round-trip xy -> XYZ -> xy and then check that the result is
* within a small percentage of the original.
*/
static int
png_colorspace_check_xy(png_XYZ *XYZ, const png_xy *xy)
{
int result;
png_xy xy_test;
/* As a side-effect this routine also returns the XYZ endpoints. */
result = png_XYZ_from_xy(XYZ, xy);
if (result) return result;
result = png_xy_from_XYZ(&xy_test, XYZ);
if (result) return result;
if (png_colorspace_endpoints_match(xy, &xy_test,
5/*actually, the math is pretty accurate*/))
return 0;
/* Too much slip */
return 1;
}
/* This is the check going the other way. The XYZ is modified to normalize it
* (another side-effect) and the xy chromaticities are returned.
*/
static int
png_colorspace_check_XYZ(png_xy *xy, png_XYZ *XYZ)
{
int result;
png_XYZ XYZtemp;
result = png_XYZ_normalize(XYZ);
if (result) return result;
result = png_xy_from_XYZ(xy, XYZ);
if (result) return result;
XYZtemp = *XYZ;
return png_colorspace_check_xy(&XYZtemp, xy);
}
/* Used to check for an endpoint match against sRGB */
static const png_xy sRGB_xy = /* From ITU-R BT.709-3 */
{
/* color x y */
/* red */ 64000, 33000,
/* green */ 30000, 60000,
/* blue */ 15000, 6000,
/* white */ 31270, 32900
};
static int
png_colorspace_set_xy_and_XYZ(png_const_structrp png_ptr,
png_colorspacerp colorspace, const png_xy *xy, const png_XYZ *XYZ,
int preferred)
{
if (colorspace->flags & PNG_COLORSPACE_INVALID)
return 0;
/* The consistency check is performed on the chromaticities; this factors out
* variations because of the normalization (or not) of the end point Y
* values.
*/
if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS))
{
/* The end points must be reasonably close to any we already have. The
* following allows an error of up to +/-1%
*/
if (!png_colorspace_endpoints_match(xy, &colorspace->end_points_xy, 1000))
{
colorspace->flags |= PNG_COLORSPACE_INVALID;
png_benign_error(png_ptr, "inconsistent chromaticities");
return 0; /* failed */
}
/* Only overwrite with preferred values */
if (!preferred)
return 1; /* ok, but no change */
}
colorspace->end_points_xy = *xy;
colorspace->end_points_XYZ = *XYZ;
colorspace->flags |= PNG_COLORSPACE_HAVE_ENDPOINTS;
/* TODO: 4000 is 0.04, and this is sufficient to accomodate the difference
* between the adapted D50 white point and the original D65 one. Is this
* necessary?
*/
if (png_colorspace_endpoints_match(xy, &sRGB_xy, 4000))
colorspace->flags |= PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB;
else
colorspace->flags &= PNG_COLORSPACE_CANCEL(
PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB);
return 2; /* ok and changed */
}
int /* PRIVATE */
png_colorspace_set_chromaticities(png_const_structrp png_ptr,
png_colorspacerp colorspace, const png_xy *xy, int preferred)
{
/* We must check the end points to ensure they are reasonable - in the past
* color management systems have crashed as a result of getting bogus
* colorant values, while this isn't the fault of libpng it is the
* responsibility of libpng because PNG carries the bomb and libpng is in a
* position to protect against it.
*/
png_XYZ XYZ;
switch (png_colorspace_check_xy(&XYZ, xy))
{
case 0: /* success */
return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, xy, &XYZ,
preferred);
case 1:
/* We can't invert the chromaticities so we can't produce value XYZ
* values. Likely as not a color management system will fail too.
*/
colorspace->flags |= PNG_COLORSPACE_INVALID;
png_benign_error(png_ptr, "invalid chromaticities");
break;
default:
/* libpng is broken; this should be a warning but if it happens we
* want error reports so for the moment it is an error.
*/
colorspace->flags |= PNG_COLORSPACE_INVALID;
png_error(png_ptr, "internal error checking chromaticities");
break;
}
return 0; /* failed */
}
int /* PRIVATE */
png_colorspace_set_endpoints(png_const_structrp png_ptr,
png_colorspacerp colorspace, const png_XYZ *XYZ_in, int preferred)
{
png_XYZ XYZ = *XYZ_in;
png_xy xy;
switch (png_colorspace_check_XYZ(&xy, &XYZ))
{
case 0:
return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, &xy, &XYZ,
preferred);
case 1:
/* End points are invalid. */
colorspace->flags |= PNG_COLORSPACE_INVALID;
png_benign_error(png_ptr, "invalid end points");
break;
default:
colorspace->flags |= PNG_COLORSPACE_INVALID;
png_error(png_ptr, "internal error checking chromaticities");
break;
}
return 0; /* failed */
}
#if defined PNG_sRGB_SUPPORTED || defined PNG_iCCP_SUPPORTED
static int
profile_error(png_const_structrp png_ptr, png_colorspacerp colorspace,
png_const_charp name, png_alloc_size_t value, png_const_charp reason)
{
size_t pos;
char message[196]; /* see below for calculation */
if (colorspace != NULL)
colorspace->flags |= PNG_COLORSPACE_INVALID;
pos = png_safecat(message, (sizeof message), 0, "profile '"); /* 9 chars */
pos = png_safecat(message, pos+79, pos, name); /* Truncate to 79 chars */
pos = png_safecat(message, (sizeof message), pos, "': "); /* +2 = 90 */
# ifdef PNG_WARNINGS_SUPPORTED
{
char number[PNG_NUMBER_BUFFER_SIZE]; /* +24 = 114*/
pos = png_safecat(message, (sizeof message), pos,
png_format_number(number, number+(sizeof number),
PNG_NUMBER_FORMAT_x, value));
}
pos = png_safecat(message, (sizeof message), pos, "h: "); /* +2 = 116 */
# endif
/* The 'reason' is an arbitrary message, allow +79 maximum 195 */
pos = png_safecat(message, (sizeof message), pos, reason);
if (colorspace != NULL)
{
# ifdef PNG_READ_SUPPORTED
if (png_ptr->mode & PNG_IS_READ_STRUCT)
png_chunk_benign_error(png_ptr, message);
else
# endif
png_app_error(png_ptr, message);
}
# ifdef PNG_WARNINGS_SUPPORTED
else
{
if (png_ptr->mode & PNG_IS_READ_STRUCT)
png_chunk_warning(png_ptr, message);
else
png_warning(png_ptr, message);
}
# endif
return 0;
}
static int /* PRIVATE */
png_colorspace_set_profile(png_const_structrp png_ptr, png_const_charp name,
png_colorspacerp colorspace, png_fixed_point gAMA, const png_xy *xy,
const png_XYZ *XYZ, int intent, int preferred)
{
int write_intent, write_gamma, result;
if (colorspace->flags & PNG_COLORSPACE_INVALID)
return 0;
/* Similar to the above routines, but ensure that both the gamma and the
* end-points are checked before doing any assignment.
*/
if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_INTENT))
{
if (colorspace->rendering_intent != intent)
return profile_error(png_ptr, colorspace, name, (unsigned)intent,
"inconsistent rendering intents");
write_intent = 0; /* Ok, don't change */
}
else
write_intent = 1; /* Needs to be written */
switch (png_colorspace_check_gamma(png_ptr, colorspace, gAMA, preferred))
{
case 2:
write_gamma = 1;
break;
case 1:
write_gamma = 0; /* current value ok and preferred */
break;
default: /* error */
return 0;
}
/* Everything seems ok up to this point, update the endpoints and, if this
* works, do the gamma and intent too.
*/
result = png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, xy, XYZ,
preferred);
switch (result)
{
case 2: /* ok, changed */
case 1: /* ok, no end-point change */
if (write_intent)
{
/* The value of intent must be checked in the caller; bugs in GCC
* force 'int' to be used as the parameter type.
*/
colorspace->rendering_intent = (png_uint_16)intent;
colorspace->flags |= PNG_COLORSPACE_HAVE_INTENT;
result = 2;
}
if (write_gamma)
{
colorspace->gamma = gAMA;
colorspace->flags |= PNG_COLORSPACE_HAVE_GAMMA;
result = 2;
}
return result;
default: /* failure */
return 0;
}
}
#endif /* sRGB || iCCP */
#ifdef PNG_sRGB_SUPPORTED
int /* PRIVATE */
png_colorspace_set_sRGB(png_const_structrp png_ptr, png_colorspacerp colorspace,
int intent, int preferred)
{
/* sRGB sets known gamma, end points and (from the chunk) intent. */
/* IMPORTANT: these are not necessarily the values found in an ICC profile
* because ICC profiles assume a D50 environment and therefore use XYZ values
* appropriate to a D50 environment. Perhaps we should too; it's just
* slightly weird because the chromaticities of the adapted colorants don't
* match the above values.
*/
static const png_XYZ sRGB_XYZ = /* D65 XYZ (*not* the D50 adapted values!) */
{
/* color X Y Z */
/* red */ 41239, 21264, 1933,
/* green */ 35758, 71517, 11919,
/* blue */ 18048, 7219, 95053
};
int result;
/* The above XYZ values, which are accurate to 5dp, produce rgb to gray
* coefficients of (6968,23435,2366), which are reduced (because they add up
* to 32769 not 32768) to (6968,23434,2366). These are the values that
* libpng has traditionally used (and are the best values given the 15bit
* algorithm used by the rgb to gray code.)
*/
if (intent < 0 || intent >= PNG_sRGB_INTENT_LAST)
return profile_error(png_ptr, colorspace, "sRGB", (unsigned)intent,
"invalid sRGB rendering intent");
result = png_colorspace_set_profile(png_ptr, "sRGB", colorspace,
PNG_GAMMA_sRGB_INVERSE, &sRGB_xy, &sRGB_XYZ, intent, preferred);
/* The implicit profile is the sRGB one, so: */
if (result)
colorspace->flags |= PNG_COLORSPACE_MATCHES_sRGB;
return result;
}
#endif /* sRGB */
#ifdef PNG_iCCP_SUPPORTED
int /* PRIVATE */
png_icc_check_length(png_const_structrp png_ptr, png_colorspacerp colorspace,
png_const_charp name, png_uint_32 profile_length)
{
if (profile_length < 132)
return profile_error(png_ptr, colorspace, name, profile_length,
"too short");
if (profile_length & 3)
return profile_error(png_ptr, colorspace, name, profile_length,
"invalid length");
return 1;
}
int /* PRIVATE */
png_icc_check_header(png_const_structrp png_ptr, png_colorspacerp colorspace,
png_const_charp name, png_uint_32 profile_length,
png_const_bytep profile/* first 132 bytes only */, int color_type)
{
png_uint_32 temp;
/* Length checks (can't be ignored) */
temp = png_get_uint_32(profile);
if (temp != profile_length)
return profile_error(png_ptr, colorspace, name, temp,
"length does not match profile");
temp = png_get_uint_32(profile+128); /* tag count: 12 bytes/tag */
if (temp > 357913930 || /* (2^32-4-132)/12: maxium possible tag count */
profile_length < 132+12*temp) /* truncated tag table */
return profile_error(png_ptr, colorspace, name, temp,
"tag count too large");
/* The 'intent' must be valid or we can't store it, ICC limits the intent to
* 16 bits.
*/
temp = png_get_uint_32(profile+64);
if (temp >= 0xffff) /* The ICC limit */
return profile_error(png_ptr, colorspace, name, temp,
"invalid rendering intent");
/* This is just a warning because the profile may be valid in future
* versions.
*/
if (temp >= PNG_sRGB_INTENT_LAST)
(void)profile_error(png_ptr, NULL, name, temp,
"intent outside defined range");
/* At this point the tag table can't be checked because it hasn't necessarily
* been loaded; however, various header fields can be checked. These checks
* are for values permitted by the PNG spec in an ICC profile; the PNG spec
* restricts the profiles that can be passed in an iCCP chunk (they must be
* appropriate to processing PNG data!)
*/
/* Data checks (could be skipped). These checks must be independent of the
* version number; however, the version number doesn't accomodate changes in
* the header fields (just the known tags and the interpretation of the
* data.)
*/
temp = png_get_uint_32(profile+36); /* signature 'ascp' */
if (temp != 0x61637370)
return profile_error(png_ptr, colorspace, name, temp,
"invalid signature");
/* The PNG spec requires this:
* "If the iCCP chunk is present, the image samples conform to the colour
* space represented by the embedded ICC profile as defined by the
* International Color Consortium [ICC]. The colour space of the ICC profile
* shall be an RGB colour space for colour images (PNG colour types 2, 3, and
* 6), or a greyscale colour space for greyscale images (PNG colour types 0
* and 4)."
*
* This checking code ensures the embedded profile (on either read or write)
* conforms to the specification requirements. Notice that an ICC 'gray'
* color-space profile contains the information to transform the monochrome
* data to XYZ or L*a*b (according to which PCS the profile uses) and this
* should be used in preference to the standard libpng K channel replication
* into R, G and B channels.
*
* Previously it was suggested that an RGB profile on grayscale data could be
* handled. However it it is clear that using an RGB profile in this context
* must be an error - there is no specification of what it means. Thus it is
* almost certainly more correct to ignore the profile.
*/
temp = png_get_uint_32(profile+16); /* data colour space field */
switch (temp)
{
case 0x52474220: /* 'RGB ' */
if (!(color_type & PNG_COLOR_MASK_COLOR))
return profile_error(png_ptr, colorspace, name, temp,
"RGB color space not permitted on grayscale PNG");
break;
case 0x47524159: /* 'GRAY' */
if (color_type & PNG_COLOR_MASK_COLOR)
return profile_error(png_ptr, colorspace, name, temp,
"Gray color space not permitted on RGB PNG");
break;
default:
return profile_error(png_ptr, colorspace, name, temp,
"invalid color space");
}
/* It is up to the application to check that the profile class matches the
* application requirements; the spec provides no guidance, but it's pretty
* weird if the profile is not scanner ('scnr'), monitor ('mntr'), printer
* ('prtr') or 'spac' (for generic color spaces). Issue a warning in these
* cases. Issue an error for device link or abstract profiles - these don't
* contain the records necessary to transform the color-space to anything
* other than the target device (and not even that for an abstract profile).
* Profiles of these classes may not be embedded in images.
*/
temp = png_get_uint_32(profile+12); /* profile/device class */
if (temp != 0x73636E72 /* 'scnr' */ && temp != 0x6D6E7472 /* 'mntr' */ &&
temp != 0x70727472 /* 'prtr' */ && temp != 0x73706163 /* 'spac' */)
{
if (temp == 0x6C696E6B /* 'link' */ || temp == 0x61627374 /* 'abst' */)
return profile_error(png_ptr, colorspace, name, temp,
"invalid ICC profile class");
/* This can only be 0x6E6D636C: a 'nmcl' profile. This is a device
* specific profile. The checks on the tags below will ensure that it can
* actually be used, but it certainly is not expected and is probably an
* error.
*/
else
(void)profile_error(png_ptr, NULL, name, temp,
"unexpected ICC profile class");
}
return 1;
}
int /* PRIVATE */
png_icc_check_tag_table(png_const_structrp png_ptr, png_colorspacerp colorspace,
png_const_charp name, png_uint_32 profile_length,
png_const_bytep profile /* header plus whole tag table */)
{
png_uint_32 tag_count = png_get_uint_32(profile+128);
png_uint_32 itag;
png_const_bytep tag = profile+132; /* The first tag */
int have_AToB0Tag = 0; /* Whether the profile has an AToB0Tag */
int have_grayTRCTag = 0; /* Whether the profile has a grayTRCTag */
unsigned int matrix_TRC_tags = 0; /* Which matrix/TRC tags are present */
# define HAVE_redMatrixColumnTag 0x01
# define HAVE_greenMatrixColumnTag 0x02
# define HAVE_blueMatrixColumnTag 0x04
# define HAVE_redTRCTag 0x10
# define HAVE_greenTRCTag 0x20
# define HAVE_blueTRCTag 0x40
# define HAVE_all_tags 0x77
for (itag=0; itag < tag_count; ++itag, tag += 12)
{
png_uint_32 tag_id = png_get_uint_32(tag+0);
png_uint_32 tag_start = png_get_uint_32(tag+4); /* must be aligned */
png_uint_32 tag_length = png_get_uint_32(tag+8);/* not padded */
/* The ICC specification does not exclude zero length tags, therefore the
* start might actually be anywhere if there is no data, but this would be
* a clear abuse of the intent of the standard so the start is checked for
* being in range.
*/
if ((tag_start & 3) != 0 || tag_start > profile_length ||
tag_length > profile_length - tag_start)
return profile_error(png_ptr, colorspace, name, tag_id,
"tag data outside profile");
/* Check the tag_id for the specific profiles which must be present for
* the profile to be valid.
*/
switch (tag_id)
{
case 0x41324230: /* 'A2B0' - AToB0Tag */
have_AToB0Tag = 1;
break;
case 0x6B545243: /* 'kTRC' - grayTRCTag */
have_grayTRCTag = 1;
break;
case 0x7258595A: /* 'rXYZ' - redMatrixColumnTag */
matrix_TRC_tags |= HAVE_redMatrixColumnTag;
break;
case 0x72545243: /* 'rTRC' - redTRCTag */
matrix_TRC_tags |= HAVE_redTRCTag;
break;
case 0x6758595A: /* 'gXYZ' - greenMatrixColumnTag */
matrix_TRC_tags |= HAVE_greenMatrixColumnTag;
break;
case 0x67545243: /* 'gTRC' - greenTRCTag */
matrix_TRC_tags |= HAVE_greenTRCTag;
break;
case 0x6258595A: /* 'bXYZ' - blueMatrixColumnTag */
matrix_TRC_tags |= HAVE_blueMatrixColumnTag;
break;
case 0x62545243: /* 'bTRC' - blueTRCTag */
matrix_TRC_tags |= HAVE_blueTRCTag;
break;
default:
break;
}
}
/* An AToB0Tag works in all valid profiles, but if it is absent then
* something matching the profile class and color space must be present.
*/
if (!have_AToB0Tag)
{
png_uint_32 profile_class = png_get_uint_32(profile+12);
switch (profile_class)
{
case 0x73636E72: /* 'scnr' - an input profile */
case 0x6D6E7472: /* 'mntr' - a display device profile */
case 0x70727472: /* 'prtr' - an output device profile */
if (png_get_uint_32(profile+16) /* color space */ ==
0x47524159 /* gray */)
{
if (!have_grayTRCTag)
return profile_error(png_ptr, colorspace, name, profile_class,
"missing grayTRCTag for monochrome profile");
}
else
{
if (matrix_TRC_tags != HAVE_all_tags)
return profile_error(png_ptr, colorspace, name, profile_class,
"missing Matrix/TRC tags for RGB profile");
}
return 1;
case 0x73706163: /* 'spac' */
return profile_error(png_ptr, colorspace, name, profile_class,
"missing AToB0Tag for colorspace profile");
default: /* should have been checked before */
png_error(png_ptr, "invalid ICC class");
return 0; /* NOT REACHED */
}
}
else
return 1;
}
#ifdef PNG_sRGB_SUPPORTED
/* Information about the known ICC sRGB profiles */
static const struct
{
png_uint_32 adler, crc, length;
png_uint_32 md5[4];
png_uint_16 have_md5;
png_uint_16 intent;
# define PNG_MD5(a,b,c,d) { a, b, c, d }, (a!=0)||(b!=0)||(c!=0)||(d!=0)
# define PNG_ICC_CHECKSUM(adler, crc, md5, intent, date, length, fname)\
{ adler, crc, length, md5, intent },
} png_sRGB_checks[] =
{
/* This data comes from contrib/tools/checksum-icc run on downloads of
* all four ICC sRGB profiles from www.color.org.
*/
/* adler32, crc32, MD5[4], intent, date, length, file-name */
PNG_ICC_CHECKSUM(0x0a3fd9f6, 0x3b8772b9,
PNG_MD5(0x29f83dde, 0xaff255ae, 0x7842fae4, 0xca83390d), 0,
"2009/03/27 21:36:31", 3048, "sRGB_IEC61966-2-1_black_scaled.icc")
/* ICC sRGB v2 perceptual no black-compensation: */
PNG_ICC_CHECKSUM(0x4909e5e1, 0x427ebb21,
PNG_MD5(0xc95bd637, 0xe95d8a3b, 0x0df38f99, 0xc1320389), 1,
"2009/03/27 21:37:45", 3052, "sRGB_IEC61966-2-1_no_black_scaling.icc")
PNG_ICC_CHECKSUM(0xfd2144a1, 0x306fd8ae,
PNG_MD5(0xfc663378, 0x37e2886b, 0xfd72e983, 0x8228f1b8), 0,
"2009/08/10 17:28:01", 60988, "sRGB_v4_ICC_preference_displayclass.icc")
/* ICC sRGB v4 perceptual */
PNG_ICC_CHECKSUM(0x209c35d2, 0xbbef7812,
PNG_MD5(0x34562abf, 0x994ccd06, 0x6d2c5721, 0xd0d68c5d), 0,
"2007/07/25 00:05:37", 60960, "sRGB_v4_ICC_preference.icc")
/* The following profiles have no known MD5 checksum. If there is a match
* on the (empty) MD5 the other fields are used to attempt a match and
* a warning is produced. The first two of these profiles have a 'cprt' tag
* which suggests that they were also made by Hewlett Packard.
*/
PNG_ICC_CHECKSUM(0xa054d762, 0x5d5129ce,
PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1,
"2004/07/21 18:57:42", 3024, "sRGB_IEC61966-2-1_noBPC.icc")
PNG_ICC_CHECKSUM(0xf784f3fb, 0x182ea552,
PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 0,
"1998/02/09 06:49:00", 3144, "sRGB Profile.icc")
PNG_ICC_CHECKSUM(0x0398f3fcUL, 0xf29e526dUL,
PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1,
"1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 media-relative")
};
static int
png_compare_ICC_profile_with_sRGB(png_const_structrp png_ptr,
png_const_bytep profile, uLong adler)
{
/* The quick check is to verify just the MD5 signature and trust the
* rest of the data. Because the profile has already been verified for
* correctness this is safe. png_colorspace_set_sRGB will check the 'intent'
* field too, so if the profile has been edited with an intent not defined
* by sRGB (but maybe defined by a later ICC specification) the read of
* the profile will fail at that point.
*/
png_uint_32 length = 0;
png_uint_32 intent = 0x10000; /* invalid */
#if PNG_sRGB_PROFILE_CHECKS > 1
uLong crc = 0; /* the value for 0 length data */
#endif
unsigned int i;
for (i=0; i < (sizeof png_sRGB_checks) / (sizeof png_sRGB_checks[0]); ++i)
{
if (png_get_uint_32(profile+84) == png_sRGB_checks[i].md5[0] &&
png_get_uint_32(profile+88) == png_sRGB_checks[i].md5[1] &&
png_get_uint_32(profile+92) == png_sRGB_checks[i].md5[2] &&
png_get_uint_32(profile+96) == png_sRGB_checks[i].md5[3])
{
/* This may be one of the old HP profiles without an MD5, in that
* case we can only use the length and Adler32 (note that these
* are not used by default if there is an MD5!)
*/
# if PNG_sRGB_PROFILE_CHECKS == 0
if (png_sRGB_checks[i].have_md5)
return 1;
# endif
/* Profile is unsigned or more checks have been configured in. */
if (length == 0)
{
length = png_get_uint_32(profile);
intent = png_get_uint_32(profile+64);
}
/* Length *and* intent must match */
if (length == png_sRGB_checks[i].length &&
intent == png_sRGB_checks[i].intent)
{
/* Now calculate the alder32 if not done already. */
if (adler == 0)
{
adler = adler32(0, NULL, 0);
adler = adler32(adler, profile, length);
}
if (adler == png_sRGB_checks[i].adler)
{
/* These basic checks suggest that the data has not been
* modified, but if the check level is more than 1 perform
* our own crc32 checksum on the data.
*/
# if PNG_sRGB_PROFILE_CHECKS > 1
if (crc == 0)
{
crc = crc32(0, NULL, 0);
crc = crc32(crc, profile, length);
}
/* So this check must pass for the 'return' below to happen.
*/
if (crc == png_sRGB_checks[i].crc)
# endif
{
/* Warn that this being done; this isn't even an error since
* the profile is perfectly valid, but it would be nice if
* people used the up-to-date ones.
*/
if (!png_sRGB_checks[i].have_md5)
{
# ifdef PNG_READ_SUPPORTED
if (png_ptr->mode & PNG_IS_READ_STRUCT)
png_chunk_warning(png_ptr,
"out-of-date sRGB profile with no signature");
else
# endif
png_app_warning(png_ptr,
"out-of-date sRGB profile with no signature");
}
return 1;
}
}
}
# if PNG_sRGB_PROFILE_CHECKS > 0
/* The signature matched, but the profile had been changed in some
* way. This is an apparent violation of the ICC terms of use and,
* anyway, the rejection may be unexpected.
*/
if (png_sRGB_checks[i].have_md5)
png_benign_error(png_ptr,
"copyright violation: edited ICC profile ignored");
# endif
}
}
return 0; /* no match */
}
#endif
int /* PRIVATE */
png_icc_set_gAMA_and_cHRM(png_const_structrp png_ptr,
png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile,
uLong adler, int preferred)
{
# ifdef PNG_sRGB_SUPPORTED
/* 1) Is this profile one of the known ICC sRGB profiles? If it is, just
* set the sRGB information.
*/
if (png_compare_ICC_profile_with_sRGB(png_ptr, profile, adler))
return png_colorspace_set_sRGB(png_ptr, colorspace,
(int)/*already checked*/png_get_uint_32(profile+64), preferred);
else
# endif
/* 2) Attempt to extract the gAMA and cHRM information from non-sRGB
* profiles. Always set the rendering intent from the profile.
*/
{
/* TODO: implement this; at present it is possible to set a detectably
* incorrect ICC profile which, unfortunately, is likely to cause external
* color management software to crash (though the checks on the tag table
* do actually eliminate the most dangerous errors).
*/
PNG_UNUSED(name) /* NYI */
return 1;
}
}
int /* PRIVATE */
png_colorspace_set_ICC(png_const_structrp png_ptr, png_colorspacerp colorspace,
png_const_charp name, png_uint_32 profile_length,
png_const_bytep profile, int preferred, int color_type)
{
if (colorspace->flags & PNG_COLORSPACE_INVALID)
return 0;
if (png_icc_check_length(png_ptr, colorspace, name, profile_length) &&
png_icc_check_header(png_ptr, colorspace, name, profile_length, profile,
color_type) &&
png_icc_check_tag_table(png_ptr, colorspace, name, profile_length,
profile))
{
png_icc_set_gAMA_and_cHRM(png_ptr, colorspace, name, profile, 0,
preferred);
return 1;
}
/* Failure case */
return 0;
}
#endif /* iCCP */
#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED
void /* PRIVATE */
png_colorspace_set_rgb_coefficients(png_structrp png_ptr)
{
/* Set the rgb_to_gray coefficients from the colorspace. */
if (!png_ptr->rgb_to_gray_coefficients_set &&
(png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0)
{
/* png_set_background has not been called, get the coefficients from the Y
* values of the colorspace colorants.
*/
png_fixed_point r = png_ptr->colorspace.end_points_XYZ.red_Y;
png_fixed_point g = png_ptr->colorspace.end_points_XYZ.green_Y;
png_fixed_point b = png_ptr->colorspace.end_points_XYZ.blue_Y;
png_fixed_point total = r+g+b;
if (total > 0 &&
r >= 0 && png_muldiv(&r, r, 32768, total) && r >= 0 && r <= 32768 &&
g >= 0 && png_muldiv(&g, g, 32768, total) && g >= 0 && g <= 32768 &&
b >= 0 && png_muldiv(&b, b, 32768, total) && b >= 0 && b <= 32768 &&
r+g+b <= 32769)
{
/* We allow 0 coefficients here. r+g+b may be 32769 if two or
* all of the coefficients were rounded up. Handle this by
* reducing the *largest* coefficient by 1; this matches the
* approach used for the default coefficients in pngrtran.c
*/
int add = 0;
if (r+g+b > 32768)
add = -1;
else if (r+g+b < 32768)
add = 1;
if (add != 0)
{
if (g >= r && g >= b)
g += add;
else if (r >= g && r >= b)
r += add;
else
b += add;
}
/* Check for an internal error. */
if (r+g+b != 32768)
png_error(png_ptr,
"internal error handling cHRM coefficients");
else
{
png_ptr->rgb_to_gray_red_coeff = (png_uint_16)r;
png_ptr->rgb_to_gray_green_coeff = (png_uint_16)g;
}
}
/* This is a png_error at present even though it could be ignored -
* it should never happen, but it is important that if it does, the
* bug is fixed.
*/
else
png_error(png_ptr, "internal error handling cHRM->XYZ");
}
}
#endif
#endif /* COLORSPACE */
void /* PRIVATE */
png_check_IHDR(png_const_structrp png_ptr,
png_uint_32 width, png_uint_32 height, int bit_depth,
int color_type, int interlace_type, int compression_type,
int filter_type)
{
int error = 0;
/* Check for width and height valid values */
if (width == 0)
{
png_warning(png_ptr, "Image width is zero in IHDR");
error = 1;
}
if (height == 0)
{
png_warning(png_ptr, "Image height is zero in IHDR");
error = 1;
}
# ifdef PNG_SET_USER_LIMITS_SUPPORTED
if (width > png_ptr->user_width_max)
# else
if (width > PNG_USER_WIDTH_MAX)
# endif
{
png_warning(png_ptr, "Image width exceeds user limit in IHDR");
error = 1;
}
# ifdef PNG_SET_USER_LIMITS_SUPPORTED
if (height > png_ptr->user_height_max)
# else
if (height > PNG_USER_HEIGHT_MAX)
# endif
{
png_warning(png_ptr, "Image height exceeds user limit in IHDR");
error = 1;
}
if (width > PNG_UINT_31_MAX)
{
png_warning(png_ptr, "Invalid image width in IHDR");
error = 1;
}
if (height > PNG_UINT_31_MAX)
{
png_warning(png_ptr, "Invalid image height in IHDR");
error = 1;
}
if (width > (PNG_UINT_32_MAX
>> 3) /* 8-byte RGBA pixels */
- 48 /* bigrowbuf hack */
- 1 /* filter byte */
- 7*8 /* rounding of width to multiple of 8 pixels */
- 8) /* extra max_pixel_depth pad */
png_warning(png_ptr, "Width is too large for libpng to process pixels");
/* Check other values */
if (bit_depth != 1 && bit_depth != 2 && bit_depth != 4 &&
bit_depth != 8 && bit_depth != 16)
{
png_warning(png_ptr, "Invalid bit depth in IHDR");
error = 1;
}
if (color_type < 0 || color_type == 1 ||
color_type == 5 || color_type > 6)
{
png_warning(png_ptr, "Invalid color type in IHDR");
error = 1;
}
if (((color_type == PNG_COLOR_TYPE_PALETTE) && bit_depth > 8) ||
((color_type == PNG_COLOR_TYPE_RGB ||
color_type == PNG_COLOR_TYPE_GRAY_ALPHA ||
color_type == PNG_COLOR_TYPE_RGB_ALPHA) && bit_depth < 8))
{
png_warning(png_ptr, "Invalid color type/bit depth combination in IHDR");
error = 1;
}
if (interlace_type >= PNG_INTERLACE_LAST)
{
png_warning(png_ptr, "Unknown interlace method in IHDR");
error = 1;
}
if (compression_type != PNG_COMPRESSION_TYPE_BASE)
{
png_warning(png_ptr, "Unknown compression method in IHDR");
error = 1;
}
# ifdef PNG_MNG_FEATURES_SUPPORTED
/* Accept filter_method 64 (intrapixel differencing) only if
* 1. Libpng was compiled with PNG_MNG_FEATURES_SUPPORTED and
* 2. Libpng did not read a PNG signature (this filter_method is only
* used in PNG datastreams that are embedded in MNG datastreams) and
* 3. The application called png_permit_mng_features with a mask that
* included PNG_FLAG_MNG_FILTER_64 and
* 4. The filter_method is 64 and
* 5. The color_type is RGB or RGBA
*/
if ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) &&
png_ptr->mng_features_permitted)
png_warning(png_ptr, "MNG features are not allowed in a PNG datastream");
if (filter_type != PNG_FILTER_TYPE_BASE)
{
if (!((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) &&
(filter_type == PNG_INTRAPIXEL_DIFFERENCING) &&
((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) == 0) &&
(color_type == PNG_COLOR_TYPE_RGB ||
color_type == PNG_COLOR_TYPE_RGB_ALPHA)))
{
png_warning(png_ptr, "Unknown filter method in IHDR");
error = 1;
}
if (png_ptr->mode & PNG_HAVE_PNG_SIGNATURE)
{
png_warning(png_ptr, "Invalid filter method in IHDR");
error = 1;
}
}
# else
if (filter_type != PNG_FILTER_TYPE_BASE)
{
png_warning(png_ptr, "Unknown filter method in IHDR");
error = 1;
}
# endif
if (error == 1)
png_error(png_ptr, "Invalid IHDR data");
}
#if defined(PNG_sCAL_SUPPORTED) || defined(PNG_pCAL_SUPPORTED)
/* ASCII to fp functions */
/* Check an ASCII formated floating point value, see the more detailed
* comments in pngpriv.h
*/
/* The following is used internally to preserve the sticky flags */
#define png_fp_add(state, flags) ((state) |= (flags))
#define png_fp_set(state, value) ((state) = (value) | ((state) & PNG_FP_STICKY))
int /* PRIVATE */
png_check_fp_number(png_const_charp string, png_size_t size, int *statep,
png_size_tp whereami)
{
int state = *statep;
png_size_t i = *whereami;
while (i < size)
{
int type;
/* First find the type of the next character */
switch (string[i])
{
case 43: type = PNG_FP_SAW_SIGN; break;
case 45: type = PNG_FP_SAW_SIGN + PNG_FP_NEGATIVE; break;
case 46: type = PNG_FP_SAW_DOT; break;
case 48: type = PNG_FP_SAW_DIGIT; break;
case 49: case 50: case 51: case 52:
case 53: case 54: case 55: case 56:
case 57: type = PNG_FP_SAW_DIGIT + PNG_FP_NONZERO; break;
case 69:
case 101: type = PNG_FP_SAW_E; break;
default: goto PNG_FP_End;
}
/* Now deal with this type according to the current
* state, the type is arranged to not overlap the
* bits of the PNG_FP_STATE.
*/
switch ((state & PNG_FP_STATE) + (type & PNG_FP_SAW_ANY))
{
case PNG_FP_INTEGER + PNG_FP_SAW_SIGN:
if (state & PNG_FP_SAW_ANY)
goto PNG_FP_End; /* not a part of the number */
png_fp_add(state, type);
break;
case PNG_FP_INTEGER + PNG_FP_SAW_DOT:
/* Ok as trailer, ok as lead of fraction. */
if (state & PNG_FP_SAW_DOT) /* two dots */
goto PNG_FP_End;
else if (state & PNG_FP_SAW_DIGIT) /* trailing dot? */
png_fp_add(state, type);
else
png_fp_set(state, PNG_FP_FRACTION | type);
break;
case PNG_FP_INTEGER + PNG_FP_SAW_DIGIT:
if (state & PNG_FP_SAW_DOT) /* delayed fraction */
png_fp_set(state, PNG_FP_FRACTION | PNG_FP_SAW_DOT);
png_fp_add(state, type | PNG_FP_WAS_VALID);
break;
case PNG_FP_INTEGER + PNG_FP_SAW_E:
if ((state & PNG_FP_SAW_DIGIT) == 0)
goto PNG_FP_End;
png_fp_set(state, PNG_FP_EXPONENT);
break;
/* case PNG_FP_FRACTION + PNG_FP_SAW_SIGN:
goto PNG_FP_End; ** no sign in fraction */
/* case PNG_FP_FRACTION + PNG_FP_SAW_DOT:
goto PNG_FP_End; ** Because SAW_DOT is always set */
case PNG_FP_FRACTION + PNG_FP_SAW_DIGIT:
png_fp_add(state, type | PNG_FP_WAS_VALID);
break;
case PNG_FP_FRACTION + PNG_FP_SAW_E:
/* This is correct because the trailing '.' on an
* integer is handled above - so we can only get here
* with the sequence ".E" (with no preceding digits).
*/
if ((state & PNG_FP_SAW_DIGIT) == 0)
goto PNG_FP_End;
png_fp_set(state, PNG_FP_EXPONENT);
break;
case PNG_FP_EXPONENT + PNG_FP_SAW_SIGN:
if (state & PNG_FP_SAW_ANY)
goto PNG_FP_End; /* not a part of the number */
png_fp_add(state, PNG_FP_SAW_SIGN);
break;
/* case PNG_FP_EXPONENT + PNG_FP_SAW_DOT:
goto PNG_FP_End; */
case PNG_FP_EXPONENT + PNG_FP_SAW_DIGIT:
png_fp_add(state, PNG_FP_SAW_DIGIT | PNG_FP_WAS_VALID);
break;
/* case PNG_FP_EXPONEXT + PNG_FP_SAW_E:
goto PNG_FP_End; */
default: goto PNG_FP_End; /* I.e. break 2 */
}
/* The character seems ok, continue. */
++i;
}
PNG_FP_End:
/* Here at the end, update the state and return the correct
* return code.
*/
*statep = state;
*whereami = i;
return (state & PNG_FP_SAW_DIGIT) != 0;
}
/* The same but for a complete string. */
int
png_check_fp_string(png_const_charp string, png_size_t size)
{
int state=0;
png_size_t char_index=0;
if (png_check_fp_number(string, size, &state, &char_index) &&
(char_index == size || string[char_index] == 0))
return state /* must be non-zero - see above */;
return 0; /* i.e. fail */
}
#endif /* pCAL or sCAL */
#ifdef PNG_sCAL_SUPPORTED
# ifdef PNG_FLOATING_POINT_SUPPORTED
/* Utility used below - a simple accurate power of ten from an integral
* exponent.
*/
static double
png_pow10(int power)
{
int recip = 0;
double d = 1;
/* Handle negative exponent with a reciprocal at the end because
* 10 is exact whereas .1 is inexact in base 2
*/
if (power < 0)
{
if (power < DBL_MIN_10_EXP) return 0;
recip = 1, power = -power;
}
if (power > 0)
{
/* Decompose power bitwise. */
double mult = 10;
do
{
if (power & 1) d *= mult;
mult *= mult;
power >>= 1;
}
while (power > 0);
if (recip) d = 1/d;
}
/* else power is 0 and d is 1 */
return d;
}
/* Function to format a floating point value in ASCII with a given
* precision.
*/
void /* PRIVATE */
png_ascii_from_fp(png_const_structrp png_ptr, png_charp ascii, png_size_t size,
double fp, unsigned int precision)
{
/* We use standard functions from math.h, but not printf because
* that would require stdio. The caller must supply a buffer of
* sufficient size or we will png_error. The tests on size and
* the space in ascii[] consumed are indicated below.
*/
if (precision < 1)
precision = DBL_DIG;
/* Enforce the limit of the implementation precision too. */
if (precision > DBL_DIG+1)
precision = DBL_DIG+1;
/* Basic sanity checks */
if (size >= precision+5) /* See the requirements below. */
{
if (fp < 0)
{
fp = -fp;
*ascii++ = 45; /* '-' PLUS 1 TOTAL 1 */
--size;
}
if (fp >= DBL_MIN && fp <= DBL_MAX)
{
int exp_b10; /* A base 10 exponent */
double base; /* 10^exp_b10 */
/* First extract a base 10 exponent of the number,
* the calculation below rounds down when converting
* from base 2 to base 10 (multiply by log10(2) -
* 0.3010, but 77/256 is 0.3008, so exp_b10 needs to
* be increased. Note that the arithmetic shift
* performs a floor() unlike C arithmetic - using a
* C multiply would break the following for negative
* exponents.
*/
(void)frexp(fp, &exp_b10); /* exponent to base 2 */
exp_b10 = (exp_b10 * 77) >> 8; /* <= exponent to base 10 */
/* Avoid underflow here. */
base = png_pow10(exp_b10); /* May underflow */
while (base < DBL_MIN || base < fp)
{
/* And this may overflow. */
double test = png_pow10(exp_b10+1);
if (test <= DBL_MAX)
++exp_b10, base = test;
else
break;
}
/* Normalize fp and correct exp_b10, after this fp is in the
* range [.1,1) and exp_b10 is both the exponent and the digit
* *before* which the decimal point should be inserted
* (starting with 0 for the first digit). Note that this
* works even if 10^exp_b10 is out of range because of the
* test on DBL_MAX above.
*/
fp /= base;
while (fp >= 1) fp /= 10, ++exp_b10;
/* Because of the code above fp may, at this point, be
* less than .1, this is ok because the code below can
* handle the leading zeros this generates, so no attempt
* is made to correct that here.
*/
{
int czero, clead, cdigits;
char exponent[10];
/* Allow up to two leading zeros - this will not lengthen
* the number compared to using E-n.
*/
if (exp_b10 < 0 && exp_b10 > -3) /* PLUS 3 TOTAL 4 */
{
czero = -exp_b10; /* PLUS 2 digits: TOTAL 3 */
exp_b10 = 0; /* Dot added below before first output. */
}
else
czero = 0; /* No zeros to add */
/* Generate the digit list, stripping trailing zeros and
* inserting a '.' before a digit if the exponent is 0.
*/
clead = czero; /* Count of leading zeros */
cdigits = 0; /* Count of digits in list. */
do
{
double d;
fp *= 10;
/* Use modf here, not floor and subtract, so that
* the separation is done in one step. At the end
* of the loop don't break the number into parts so
* that the final digit is rounded.
*/
if (cdigits+czero-clead+1 < (int)precision)
fp = modf(fp, &d);
else
{
d = floor(fp + .5);
if (d > 9)
{
/* Rounding up to 10, handle that here. */
if (czero > 0)
{
--czero, d = 1;
if (cdigits == 0) --clead;
}
else
{
while (cdigits > 0 && d > 9)
{
int ch = *--ascii;
if (exp_b10 != (-1))
++exp_b10;
else if (ch == 46)
{
ch = *--ascii, ++size;
/* Advance exp_b10 to '1', so that the
* decimal point happens after the
* previous digit.
*/
exp_b10 = 1;
}
--cdigits;
d = ch - 47; /* I.e. 1+(ch-48) */
}
/* Did we reach the beginning? If so adjust the
* exponent but take into account the leading
* decimal point.
*/
if (d > 9) /* cdigits == 0 */
{
if (exp_b10 == (-1))
{
/* Leading decimal point (plus zeros?), if
* we lose the decimal point here it must
* be reentered below.
*/
int ch = *--ascii;
if (ch == 46)
++size, exp_b10 = 1;
/* Else lost a leading zero, so 'exp_b10' is
* still ok at (-1)
*/
}
else
++exp_b10;
/* In all cases we output a '1' */
d = 1;
}
}
}
fp = 0; /* Guarantees termination below. */
}
if (d == 0)
{
++czero;
if (cdigits == 0) ++clead;
}
else
{
/* Included embedded zeros in the digit count. */
cdigits += czero - clead;
clead = 0;
while (czero > 0)
{
/* exp_b10 == (-1) means we just output the decimal
* place - after the DP don't adjust 'exp_b10' any
* more!
*/
if (exp_b10 != (-1))
{
if (exp_b10 == 0) *ascii++ = 46, --size;
/* PLUS 1: TOTAL 4 */
--exp_b10;
}
*ascii++ = 48, --czero;
}
if (exp_b10 != (-1))
{
if (exp_b10 == 0) *ascii++ = 46, --size; /* counted
above */
--exp_b10;
}
*ascii++ = (char)(48 + (int)d), ++cdigits;
}
}
while (cdigits+czero-clead < (int)precision && fp > DBL_MIN);
/* The total output count (max) is now 4+precision */
/* Check for an exponent, if we don't need one we are
* done and just need to terminate the string. At
* this point exp_b10==(-1) is effectively if flag - it got
* to '-1' because of the decrement after outputing
* the decimal point above (the exponent required is
* *not* -1!)
*/
if (exp_b10 >= (-1) && exp_b10 <= 2)
{
/* The following only happens if we didn't output the
* leading zeros above for negative exponent, so this
* doest add to the digit requirement. Note that the
* two zeros here can only be output if the two leading
* zeros were *not* output, so this doesn't increase
* the output count.
*/
while (--exp_b10 >= 0) *ascii++ = 48;
*ascii = 0;
/* Total buffer requirement (including the '\0') is
* 5+precision - see check at the start.
*/
return;
}
/* Here if an exponent is required, adjust size for
* the digits we output but did not count. The total
* digit output here so far is at most 1+precision - no
* decimal point and no leading or trailing zeros have
* been output.
*/
size -= cdigits;
*ascii++ = 69, --size; /* 'E': PLUS 1 TOTAL 2+precision */
/* The following use of an unsigned temporary avoids ambiguities in
* the signed arithmetic on exp_b10 and permits GCC at least to do
* better optimization.
*/
{
unsigned int uexp_b10;
if (exp_b10 < 0)
{
*ascii++ = 45, --size; /* '-': PLUS 1 TOTAL 3+precision */
uexp_b10 = -exp_b10;
}
else
uexp_b10 = exp_b10;
cdigits = 0;
while (uexp_b10 > 0)
{
exponent[cdigits++] = (char)(48 + uexp_b10 % 10);
uexp_b10 /= 10;
}
}
/* Need another size check here for the exponent digits, so
* this need not be considered above.
*/
if ((int)size > cdigits)
{
while (cdigits > 0) *ascii++ = exponent[--cdigits];
*ascii = 0;
return;
}
}
}
else if (!(fp >= DBL_MIN))
{
*ascii++ = 48; /* '0' */
*ascii = 0;
return;
}
else
{
*ascii++ = 105; /* 'i' */
*ascii++ = 110; /* 'n' */
*ascii++ = 102; /* 'f' */
*ascii = 0;
return;
}
}
/* Here on buffer too small. */
png_error(png_ptr, "ASCII conversion buffer too small");
}
# endif /* FLOATING_POINT */
# ifdef PNG_FIXED_POINT_SUPPORTED
/* Function to format a fixed point value in ASCII.
*/
void /* PRIVATE */
png_ascii_from_fixed(png_const_structrp png_ptr, png_charp ascii,
png_size_t size, png_fixed_point fp)
{
/* Require space for 10 decimal digits, a decimal point, a minus sign and a
* trailing \0, 13 characters:
*/
if (size > 12)
{
png_uint_32 num;
/* Avoid overflow here on the minimum integer. */
if (fp < 0)
*ascii++ = 45, --size, num = -fp;
else
num = fp;
if (num <= 0x80000000) /* else overflowed */
{
unsigned int ndigits = 0, first = 16 /* flag value */;
char digits[10];
while (num)
{
/* Split the low digit off num: */
unsigned int tmp = num/10;
num -= tmp*10;
digits[ndigits++] = (char)(48 + num);
/* Record the first non-zero digit, note that this is a number
* starting at 1, it's not actually the array index.
*/
if (first == 16 && num > 0)
first = ndigits;
num = tmp;
}
if (ndigits > 0)
{
while (ndigits > 5) *ascii++ = digits[--ndigits];
/* The remaining digits are fractional digits, ndigits is '5' or
* smaller at this point. It is certainly not zero. Check for a
* non-zero fractional digit:
*/
if (first <= 5)
{
unsigned int i;
*ascii++ = 46; /* decimal point */
/* ndigits may be <5 for small numbers, output leading zeros
* then ndigits digits to first:
*/
i = 5;
while (ndigits < i) *ascii++ = 48, --i;
while (ndigits >= first) *ascii++ = digits[--ndigits];
/* Don't output the trailing zeros! */
}
}
else
*ascii++ = 48;
/* And null terminate the string: */
*ascii = 0;
return;
}
}
/* Here on buffer too small. */
png_error(png_ptr, "ASCII conversion buffer too small");
}
# endif /* FIXED_POINT */
#endif /* READ_SCAL */
#if defined(PNG_FLOATING_POINT_SUPPORTED) && \
!defined(PNG_FIXED_POINT_MACRO_SUPPORTED) && \
(defined(PNG_gAMA_SUPPORTED) || defined(PNG_cHRM_SUPPORTED) || \
defined(PNG_sCAL_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) || \
defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)) || \
(defined(PNG_sCAL_SUPPORTED) && \
defined(PNG_FLOATING_ARITHMETIC_SUPPORTED))
png_fixed_point
png_fixed(png_const_structrp png_ptr, double fp, png_const_charp text)
{
double r = floor(100000 * fp + .5);
if (r > 2147483647. || r < -2147483648.)
png_fixed_error(png_ptr, text);
return (png_fixed_point)r;
}
#endif
#if defined(PNG_READ_GAMMA_SUPPORTED) || \
defined(PNG_INCH_CONVERSIONS_SUPPORTED) || defined(PNG__READ_pHYs_SUPPORTED)
/* muldiv functions */
/* This API takes signed arguments and rounds the result to the nearest
* integer (or, for a fixed point number - the standard argument - to
* the nearest .00001). Overflow and divide by zero are signalled in
* the result, a boolean - true on success, false on overflow.
*/
int
png_muldiv(png_fixed_point_p res, png_fixed_point a, png_int_32 times,
png_int_32 divisor)
{
/* Return a * times / divisor, rounded. */
if (divisor != 0)
{
if (a == 0 || times == 0)
{
*res = 0;
return 1;
}
else
{
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
double r = a;
r *= times;
r /= divisor;
r = floor(r+.5);
/* A png_fixed_point is a 32-bit integer. */
if (r <= 2147483647. && r >= -2147483648.)
{
*res = (png_fixed_point)r;
return 1;
}
#else
int negative = 0;
png_uint_32 A, T, D;
png_uint_32 s16, s32, s00;
if (a < 0)
negative = 1, A = -a;
else
A = a;
if (times < 0)
negative = !negative, T = -times;
else
T = times;
if (divisor < 0)
negative = !negative, D = -divisor;
else
D = divisor;
/* Following can't overflow because the arguments only
* have 31 bits each, however the result may be 32 bits.
*/
s16 = (A >> 16) * (T & 0xffff) +
(A & 0xffff) * (T >> 16);
/* Can't overflow because the a*times bit is only 30
* bits at most.
*/
s32 = (A >> 16) * (T >> 16) + (s16 >> 16);
s00 = (A & 0xffff) * (T & 0xffff);
s16 = (s16 & 0xffff) << 16;
s00 += s16;
if (s00 < s16)
++s32; /* carry */
if (s32 < D) /* else overflow */
{
/* s32.s00 is now the 64-bit product, do a standard
* division, we know that s32 < D, so the maximum
* required shift is 31.
*/
int bitshift = 32;
png_fixed_point result = 0; /* NOTE: signed */
while (--bitshift >= 0)
{
png_uint_32 d32, d00;
if (bitshift > 0)
d32 = D >> (32-bitshift), d00 = D << bitshift;
else
d32 = 0, d00 = D;
if (s32 > d32)
{
if (s00 < d00) --s32; /* carry */
s32 -= d32, s00 -= d00, result += 1<<bitshift;
}
else
if (s32 == d32 && s00 >= d00)
s32 = 0, s00 -= d00, result += 1<<bitshift;
}
/* Handle the rounding. */
if (s00 >= (D >> 1))
++result;
if (negative)
result = -result;
/* Check for overflow. */
if ((negative && result <= 0) || (!negative && result >= 0))
{
*res = result;
return 1;
}
}
#endif
}
}
return 0;
}
#endif /* READ_GAMMA || INCH_CONVERSIONS */
#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_INCH_CONVERSIONS_SUPPORTED)
/* The following is for when the caller doesn't much care about the
* result.
*/
png_fixed_point
png_muldiv_warn(png_const_structrp png_ptr, png_fixed_point a, png_int_32 times,
png_int_32 divisor)
{
png_fixed_point result;
if (png_muldiv(&result, a, times, divisor))
return result;
png_warning(png_ptr, "fixed point overflow ignored");
return 0;
}
#endif
#ifdef PNG_GAMMA_SUPPORTED /* more fixed point functions for gamma */
/* Calculate a reciprocal, return 0 on div-by-zero or overflow. */
png_fixed_point
png_reciprocal(png_fixed_point a)
{
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
double r = floor(1E10/a+.5);
if (r <= 2147483647. && r >= -2147483648.)
return (png_fixed_point)r;
#else
png_fixed_point res;
if (png_muldiv(&res, 100000, 100000, a))
return res;
#endif
return 0; /* error/overflow */
}
/* This is the shared test on whether a gamma value is 'significant' - whether
* it is worth doing gamma correction.
*/
int /* PRIVATE */
png_gamma_significant(png_fixed_point gamma_val)
{
return gamma_val < PNG_FP_1 - PNG_GAMMA_THRESHOLD_FIXED ||
gamma_val > PNG_FP_1 + PNG_GAMMA_THRESHOLD_FIXED;
}
#endif
#ifdef PNG_READ_GAMMA_SUPPORTED
/* A local convenience routine. */
static png_fixed_point
png_product2(png_fixed_point a, png_fixed_point b)
{
/* The required result is 1/a * 1/b; the following preserves accuracy. */
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
double r = a * 1E-5;
r *= b;
r = floor(r+.5);
if (r <= 2147483647. && r >= -2147483648.)
return (png_fixed_point)r;
#else
png_fixed_point res;
if (png_muldiv(&res, a, b, 100000))
return res;
#endif
return 0; /* overflow */
}
/* The inverse of the above. */
png_fixed_point
png_reciprocal2(png_fixed_point a, png_fixed_point b)
{
/* The required result is 1/a * 1/b; the following preserves accuracy. */
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
double r = 1E15/a;
r /= b;
r = floor(r+.5);
if (r <= 2147483647. && r >= -2147483648.)
return (png_fixed_point)r;
#else
/* This may overflow because the range of png_fixed_point isn't symmetric,
* but this API is only used for the product of file and screen gamma so it
* doesn't matter that the smallest number it can produce is 1/21474, not
* 1/100000
*/
png_fixed_point res = png_product2(a, b);
if (res != 0)
return png_reciprocal(res);
#endif
return 0; /* overflow */
}
#endif /* READ_GAMMA */
#ifdef PNG_READ_GAMMA_SUPPORTED /* gamma table code */
#ifndef PNG_FLOATING_ARITHMETIC_SUPPORTED
/* Fixed point gamma.
*
* The code to calculate the tables used below can be found in the shell script
* contrib/tools/intgamma.sh
*
* To calculate gamma this code implements fast log() and exp() calls using only
* fixed point arithmetic. This code has sufficient precision for either 8-bit
* or 16-bit sample values.
*
* The tables used here were calculated using simple 'bc' programs, but C double
* precision floating point arithmetic would work fine.
*
* 8-bit log table
* This is a table of -log(value/255)/log(2) for 'value' in the range 128 to
* 255, so it's the base 2 logarithm of a normalized 8-bit floating point
* mantissa. The numbers are 32-bit fractions.
*/
static const png_uint_32
png_8bit_l2[128] =
{
4270715492U, 4222494797U, 4174646467U, 4127164793U, 4080044201U, 4033279239U,
3986864580U, 3940795015U, 3895065449U, 3849670902U, 3804606499U, 3759867474U,
3715449162U, 3671346997U, 3627556511U, 3584073329U, 3540893168U, 3498011834U,
3455425220U, 3413129301U, 3371120137U, 3329393864U, 3287946700U, 3246774933U,
3205874930U, 3165243125U, 3124876025U, 3084770202U, 3044922296U, 3005329011U,
2965987113U, 2926893432U, 2888044853U, 2849438323U, 2811070844U, 2772939474U,
2735041326U, 2697373562U, 2659933400U, 2622718104U, 2585724991U, 2548951424U,
2512394810U, 2476052606U, 2439922311U, 2404001468U, 2368287663U, 2332778523U,
2297471715U, 2262364947U, 2227455964U, 2192742551U, 2158222529U, 2123893754U,
2089754119U, 2055801552U, 2022034013U, 1988449497U, 1955046031U, 1921821672U,
1888774511U, 1855902668U, 1823204291U, 1790677560U, 1758320682U, 1726131893U,
1694109454U, 1662251657U, 1630556815U, 1599023271U, 1567649391U, 1536433567U,
1505374214U, 1474469770U, 1443718700U, 1413119487U, 1382670639U, 1352370686U,
1322218179U, 1292211689U, 1262349810U, 1232631153U, 1203054352U, 1173618059U,
1144320946U, 1115161701U, 1086139034U, 1057251672U, 1028498358U, 999877854U,
971388940U, 943030410U, 914801076U, 886699767U, 858725327U, 830876614U,
803152505U, 775551890U, 748073672U, 720716771U, 693480120U, 666362667U,
639363374U, 612481215U, 585715177U, 559064263U, 532527486U, 506103872U,
479792461U, 453592303U, 427502463U, 401522014U, 375650043U, 349885648U,
324227938U, 298676034U, 273229066U, 247886176U, 222646516U, 197509248U,
172473545U, 147538590U, 122703574U, 97967701U, 73330182U, 48790236U,
24347096U, 0U
#if 0
/* The following are the values for 16-bit tables - these work fine for the
* 8-bit conversions but produce very slightly larger errors in the 16-bit
* log (about 1.2 as opposed to 0.7 absolute error in the final value). To
* use these all the shifts below must be adjusted appropriately.
*/
65166, 64430, 63700, 62976, 62257, 61543, 60835, 60132, 59434, 58741, 58054,
57371, 56693, 56020, 55352, 54689, 54030, 53375, 52726, 52080, 51439, 50803,
50170, 49542, 48918, 48298, 47682, 47070, 46462, 45858, 45257, 44661, 44068,
43479, 42894, 42312, 41733, 41159, 40587, 40020, 39455, 38894, 38336, 37782,
37230, 36682, 36137, 35595, 35057, 34521, 33988, 33459, 32932, 32408, 31887,
31369, 30854, 30341, 29832, 29325, 28820, 28319, 27820, 27324, 26830, 26339,
25850, 25364, 24880, 24399, 23920, 23444, 22970, 22499, 22029, 21562, 21098,
20636, 20175, 19718, 19262, 18808, 18357, 17908, 17461, 17016, 16573, 16132,
15694, 15257, 14822, 14390, 13959, 13530, 13103, 12678, 12255, 11834, 11415,
10997, 10582, 10168, 9756, 9346, 8937, 8531, 8126, 7723, 7321, 6921, 6523,
6127, 5732, 5339, 4947, 4557, 4169, 3782, 3397, 3014, 2632, 2251, 1872, 1495,
1119, 744, 372
#endif
};
static png_int_32
png_log8bit(unsigned int x)
{
unsigned int lg2 = 0;
/* Each time 'x' is multiplied by 2, 1 must be subtracted off the final log,
* because the log is actually negate that means adding 1. The final
* returned value thus has the range 0 (for 255 input) to 7.994 (for 1
* input), return -1 for the overflow (log 0) case, - so the result is
* always at most 19 bits.
*/
if ((x &= 0xff) == 0)
return -1;
if ((x & 0xf0) == 0)
lg2 = 4, x <<= 4;
if ((x & 0xc0) == 0)
lg2 += 2, x <<= 2;
if ((x & 0x80) == 0)
lg2 += 1, x <<= 1;
/* result is at most 19 bits, so this cast is safe: */
return (png_int_32)((lg2 << 16) + ((png_8bit_l2[x-128]+32768)>>16));
}
/* The above gives exact (to 16 binary places) log2 values for 8-bit images,
* for 16-bit images we use the most significant 8 bits of the 16-bit value to
* get an approximation then multiply the approximation by a correction factor
* determined by the remaining up to 8 bits. This requires an additional step
* in the 16-bit case.
*
* We want log2(value/65535), we have log2(v'/255), where:
*
* value = v' * 256 + v''
* = v' * f
*
* So f is value/v', which is equal to (256+v''/v') since v' is in the range 128
* to 255 and v'' is in the range 0 to 255 f will be in the range 256 to less
* than 258. The final factor also needs to correct for the fact that our 8-bit
* value is scaled by 255, whereas the 16-bit values must be scaled by 65535.
*
* This gives a final formula using a calculated value 'x' which is value/v' and
* scaling by 65536 to match the above table:
*
* log2(x/257) * 65536
*
* Since these numbers are so close to '1' we can use simple linear
* interpolation between the two end values 256/257 (result -368.61) and 258/257
* (result 367.179). The values used below are scaled by a further 64 to give
* 16-bit precision in the interpolation:
*
* Start (256): -23591
* Zero (257): 0
* End (258): 23499
*/
static png_int_32
png_log16bit(png_uint_32 x)
{
unsigned int lg2 = 0;
/* As above, but now the input has 16 bits. */
if ((x &= 0xffff) == 0)
return -1;
if ((x & 0xff00) == 0)
lg2 = 8, x <<= 8;
if ((x & 0xf000) == 0)
lg2 += 4, x <<= 4;
if ((x & 0xc000) == 0)
lg2 += 2, x <<= 2;
if ((x & 0x8000) == 0)
lg2 += 1, x <<= 1;
/* Calculate the base logarithm from the top 8 bits as a 28-bit fractional
* value.
*/
lg2 <<= 28;
lg2 += (png_8bit_l2[(x>>8)-128]+8) >> 4;
/* Now we need to interpolate the factor, this requires a division by the top
* 8 bits. Do this with maximum precision.
*/
x = ((x << 16) + (x >> 9)) / (x >> 8);
/* Since we divided by the top 8 bits of 'x' there will be a '1' at 1<<24,
* the value at 1<<16 (ignoring this) will be 0 or 1; this gives us exactly
* 16 bits to interpolate to get the low bits of the result. Round the
* answer. Note that the end point values are scaled by 64 to retain overall
* precision and that 'lg2' is current scaled by an extra 12 bits, so adjust
* the overall scaling by 6-12. Round at every step.
*/
x -= 1U << 24;
if (x <= 65536U) /* <= '257' */
lg2 += ((23591U * (65536U-x)) + (1U << (16+6-12-1))) >> (16+6-12);
else
lg2 -= ((23499U * (x-65536U)) + (1U << (16+6-12-1))) >> (16+6-12);
/* Safe, because the result can't have more than 20 bits: */
return (png_int_32)((lg2 + 2048) >> 12);
}
/* The 'exp()' case must invert the above, taking a 20-bit fixed point
* logarithmic value and returning a 16 or 8-bit number as appropriate. In
* each case only the low 16 bits are relevant - the fraction - since the
* integer bits (the top 4) simply determine a shift.
*
* The worst case is the 16-bit distinction between 65535 and 65534, this
* requires perhaps spurious accuracty in the decoding of the logarithm to
* distinguish log2(65535/65534.5) - 10^-5 or 17 bits. There is little chance
* of getting this accuracy in practice.
*
* To deal with this the following exp() function works out the exponent of the
* frational part of the logarithm by using an accurate 32-bit value from the
* top four fractional bits then multiplying in the remaining bits.
*/
static const png_uint_32
png_32bit_exp[16] =
{
/* NOTE: the first entry is deliberately set to the maximum 32-bit value. */
4294967295U, 4112874773U, 3938502376U, 3771522796U, 3611622603U, 3458501653U,
3311872529U, 3171459999U, 3037000500U, 2908241642U, 2784941738U, 2666869345U,
2553802834U, 2445529972U, 2341847524U, 2242560872U
};
/* Adjustment table; provided to explain the numbers in the code below. */
#if 0
for (i=11;i>=0;--i){ print i, " ", (1 - e(-(2^i)/65536*l(2))) * 2^(32-i), "\n"}
11 44937.64284865548751208448
10 45180.98734845585101160448
9 45303.31936980687359311872
8 45364.65110595323018870784
7 45395.35850361789624614912
6 45410.72259715102037508096
5 45418.40724413220722311168
4 45422.25021786898173001728
3 45424.17186732298419044352
2 45425.13273269940811464704
1 45425.61317555035558641664
0 45425.85339951654943850496
#endif
static png_uint_32
png_exp(png_fixed_point x)
{
if (x > 0 && x <= 0xfffff) /* Else overflow or zero (underflow) */
{
/* Obtain a 4-bit approximation */
png_uint_32 e = png_32bit_exp[(x >> 12) & 0xf];
/* Incorporate the low 12 bits - these decrease the returned value by
* multiplying by a number less than 1 if the bit is set. The multiplier
* is determined by the above table and the shift. Notice that the values
* converge on 45426 and this is used to allow linear interpolation of the
* low bits.
*/
if (x & 0x800)
e -= (((e >> 16) * 44938U) + 16U) >> 5;
if (x & 0x400)
e -= (((e >> 16) * 45181U) + 32U) >> 6;
if (x & 0x200)
e -= (((e >> 16) * 45303U) + 64U) >> 7;
if (x & 0x100)
e -= (((e >> 16) * 45365U) + 128U) >> 8;
if (x & 0x080)
e -= (((e >> 16) * 45395U) + 256U) >> 9;
if (x & 0x040)
e -= (((e >> 16) * 45410U) + 512U) >> 10;
/* And handle the low 6 bits in a single block. */
e -= (((e >> 16) * 355U * (x & 0x3fU)) + 256U) >> 9;
/* Handle the upper bits of x. */
e >>= x >> 16;
return e;
}
/* Check for overflow */
if (x <= 0)
return png_32bit_exp[0];
/* Else underflow */
return 0;
}
static png_byte
png_exp8bit(png_fixed_point lg2)
{
/* Get a 32-bit value: */
png_uint_32 x = png_exp(lg2);
/* Convert the 32-bit value to 0..255 by multiplying by 256-1, note that the
* second, rounding, step can't overflow because of the first, subtraction,
* step.
*/
x -= x >> 8;
return (png_byte)((x + 0x7fffffU) >> 24);
}
static png_uint_16
png_exp16bit(png_fixed_point lg2)
{
/* Get a 32-bit value: */
png_uint_32 x = png_exp(lg2);
/* Convert the 32-bit value to 0..65535 by multiplying by 65536-1: */
x -= x >> 16;
return (png_uint_16)((x + 32767U) >> 16);
}
#endif /* FLOATING_ARITHMETIC */
png_byte
png_gamma_8bit_correct(unsigned int value, png_fixed_point gamma_val)
{
if (value > 0 && value < 255)
{
# ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
double r = floor(255*pow(value/255.,gamma_val*.00001)+.5);
return (png_byte)r;
# else
png_int_32 lg2 = png_log8bit(value);
png_fixed_point res;
if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1))
return png_exp8bit(res);
/* Overflow. */
value = 0;
# endif
}
return (png_byte)value;
}
png_uint_16
png_gamma_16bit_correct(unsigned int value, png_fixed_point gamma_val)
{
if (value > 0 && value < 65535)
{
# ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
double r = floor(65535*pow(value/65535.,gamma_val*.00001)+.5);
return (png_uint_16)r;
# else
png_int_32 lg2 = png_log16bit(value);
png_fixed_point res;
if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1))
return png_exp16bit(res);
/* Overflow. */
value = 0;
# endif
}
return (png_uint_16)value;
}
/* This does the right thing based on the bit_depth field of the
* png_struct, interpreting values as 8-bit or 16-bit. While the result
* is nominally a 16-bit value if bit depth is 8 then the result is
* 8-bit (as are the arguments.)
*/
png_uint_16 /* PRIVATE */
png_gamma_correct(png_structrp png_ptr, unsigned int value,
png_fixed_point gamma_val)
{
if (png_ptr->bit_depth == 8)
return png_gamma_8bit_correct(value, gamma_val);
else
return png_gamma_16bit_correct(value, gamma_val);
}
/* Internal function to build a single 16-bit table - the table consists of
* 'num' 256 entry subtables, where 'num' is determined by 'shift' - the amount
* to shift the input values right (or 16-number_of_signifiant_bits).
*
* The caller is responsible for ensuring that the table gets cleaned up on
* png_error (i.e. if one of the mallocs below fails) - i.e. the *table argument
* should be somewhere that will be cleaned.
*/
static void
png_build_16bit_table(png_structrp png_ptr, png_uint_16pp *ptable,
PNG_CONST unsigned int shift, PNG_CONST png_fixed_point gamma_val)
{
/* Various values derived from 'shift': */
PNG_CONST unsigned int num = 1U << (8U - shift);
PNG_CONST unsigned int max = (1U << (16U - shift))-1U;
PNG_CONST unsigned int max_by_2 = 1U << (15U-shift);
unsigned int i;
png_uint_16pp table = *ptable =
(png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p)));
for (i = 0; i < num; i++)
{
png_uint_16p sub_table = table[i] =
(png_uint_16p)png_malloc(png_ptr, 256 * (sizeof (png_uint_16)));
/* The 'threshold' test is repeated here because it can arise for one of
* the 16-bit tables even if the others don't hit it.
*/
if (png_gamma_significant(gamma_val))
{
/* The old code would overflow at the end and this would cause the
* 'pow' function to return a result >1, resulting in an
* arithmetic error. This code follows the spec exactly; ig is
* the recovered input sample, it always has 8-16 bits.
*
* We want input * 65535/max, rounded, the arithmetic fits in 32
* bits (unsigned) so long as max <= 32767.
*/
unsigned int j;
for (j = 0; j < 256; j++)
{
png_uint_32 ig = (j << (8-shift)) + i;
# ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
/* Inline the 'max' scaling operation: */
double d = floor(65535*pow(ig/(double)max, gamma_val*.00001)+.5);
sub_table[j] = (png_uint_16)d;
# else
if (shift)
ig = (ig * 65535U + max_by_2)/max;
sub_table[j] = png_gamma_16bit_correct(ig, gamma_val);
# endif
}
}
else
{
/* We must still build a table, but do it the fast way. */
unsigned int j;
for (j = 0; j < 256; j++)
{
png_uint_32 ig = (j << (8-shift)) + i;
if (shift)
ig = (ig * 65535U + max_by_2)/max;
sub_table[j] = (png_uint_16)ig;
}
}
}
}
/* NOTE: this function expects the *inverse* of the overall gamma transformation
* required.
*/
static void
png_build_16to8_table(png_structrp png_ptr, png_uint_16pp *ptable,
PNG_CONST unsigned int shift, PNG_CONST png_fixed_point gamma_val)
{
PNG_CONST unsigned int num = 1U << (8U - shift);
PNG_CONST unsigned int max = (1U << (16U - shift))-1U;
unsigned int i;
png_uint_32 last;
png_uint_16pp table = *ptable =
(png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p)));
/* 'num' is the number of tables and also the number of low bits of low
* bits of the input 16-bit value used to select a table. Each table is
* itself index by the high 8 bits of the value.
*/
for (i = 0; i < num; i++)
table[i] = (png_uint_16p)png_malloc(png_ptr,
256 * (sizeof (png_uint_16)));
/* 'gamma_val' is set to the reciprocal of the value calculated above, so
* pow(out,g) is an *input* value. 'last' is the last input value set.
*
* In the loop 'i' is used to find output values. Since the output is
* 8-bit there are only 256 possible values. The tables are set up to
* select the closest possible output value for each input by finding
* the input value at the boundary between each pair of output values
* and filling the table up to that boundary with the lower output
* value.
*
* The boundary values are 0.5,1.5..253.5,254.5. Since these are 9-bit
* values the code below uses a 16-bit value in i; the values start at
* 128.5 (for 0.5) and step by 257, for a total of 254 values (the last
* entries are filled with 255). Start i at 128 and fill all 'last'
* table entries <= 'max'
*/
last = 0;
for (i = 0; i < 255; ++i) /* 8-bit output value */
{
/* Find the corresponding maximum input value */
png_uint_16 out = (png_uint_16)(i * 257U); /* 16-bit output value */
/* Find the boundary value in 16 bits: */
png_uint_32 bound = png_gamma_16bit_correct(out+128U, gamma_val);
/* Adjust (round) to (16-shift) bits: */
bound = (bound * max + 32768U)/65535U + 1U;
while (last < bound)
{
table[last & (0xffU >> shift)][last >> (8U - shift)] = out;
last++;
}
}
/* And fill in the final entries. */
while (last < (num << 8))
{
table[last & (0xff >> shift)][last >> (8U - shift)] = 65535U;
last++;
}
}
/* Build a single 8-bit table: same as the 16-bit case but much simpler (and
* typically much faster). Note that libpng currently does no sBIT processing
* (apparently contrary to the spec) so a 256 entry table is always generated.
*/
static void
png_build_8bit_table(png_structrp png_ptr, png_bytepp ptable,
PNG_CONST png_fixed_point gamma_val)
{
unsigned int i;
png_bytep table = *ptable = (png_bytep)png_malloc(png_ptr, 256);
if (png_gamma_significant(gamma_val)) for (i=0; i<256; i++)
table[i] = png_gamma_8bit_correct(i, gamma_val);
else for (i=0; i<256; ++i)
table[i] = (png_byte)i;
}
/* Used from png_read_destroy and below to release the memory used by the gamma
* tables.
*/
void /* PRIVATE */
png_destroy_gamma_table(png_structrp png_ptr)
{
png_free(png_ptr, png_ptr->gamma_table);
png_ptr->gamma_table = NULL;
if (png_ptr->gamma_16_table != NULL)
{
int i;
int istop = (1 << (8 - png_ptr->gamma_shift));
for (i = 0; i < istop; i++)
{
png_free(png_ptr, png_ptr->gamma_16_table[i]);
}
png_free(png_ptr, png_ptr->gamma_16_table);
png_ptr->gamma_16_table = NULL;
}
#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \
defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \
defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)
png_free(png_ptr, png_ptr->gamma_from_1);
png_ptr->gamma_from_1 = NULL;
png_free(png_ptr, png_ptr->gamma_to_1);
png_ptr->gamma_to_1 = NULL;
if (png_ptr->gamma_16_from_1 != NULL)
{
int i;
int istop = (1 << (8 - png_ptr->gamma_shift));
for (i = 0; i < istop; i++)
{
png_free(png_ptr, png_ptr->gamma_16_from_1[i]);
}
png_free(png_ptr, png_ptr->gamma_16_from_1);
png_ptr->gamma_16_from_1 = NULL;
}
if (png_ptr->gamma_16_to_1 != NULL)
{
int i;
int istop = (1 << (8 - png_ptr->gamma_shift));
for (i = 0; i < istop; i++)
{
png_free(png_ptr, png_ptr->gamma_16_to_1[i]);
}
png_free(png_ptr, png_ptr->gamma_16_to_1);
png_ptr->gamma_16_to_1 = NULL;
}
#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */
}
/* We build the 8- or 16-bit gamma tables here. Note that for 16-bit
* tables, we don't make a full table if we are reducing to 8-bit in
* the future. Note also how the gamma_16 tables are segmented so that
* we don't need to allocate > 64K chunks for a full 16-bit table.
*/
void /* PRIVATE */
png_build_gamma_table(png_structrp png_ptr, int bit_depth)
{
png_debug(1, "in png_build_gamma_table");
/* Remove any existing table; this copes with multiple calls to
* png_read_update_info. The warning is because building the gamma tables
* multiple times is a performance hit - it's harmless but the ability to call
* png_read_update_info() multiple times is new in 1.5.6 so it seems sensible
* to warn if the app introduces such a hit.
*/
if (png_ptr->gamma_table != NULL || png_ptr->gamma_16_table != NULL)
{
png_warning(png_ptr, "gamma table being rebuilt");
png_destroy_gamma_table(png_ptr);
}
if (bit_depth <= 8)
{
png_build_8bit_table(png_ptr, &png_ptr->gamma_table,
png_ptr->screen_gamma > 0 ? png_reciprocal2(png_ptr->colorspace.gamma,
png_ptr->screen_gamma) : PNG_FP_1);
#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \
defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \
defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)
if (png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY))
{
png_build_8bit_table(png_ptr, &png_ptr->gamma_to_1,
png_reciprocal(png_ptr->colorspace.gamma));
png_build_8bit_table(png_ptr, &png_ptr->gamma_from_1,
png_ptr->screen_gamma > 0 ? png_reciprocal(png_ptr->screen_gamma) :
png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */);
}
#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */
}
else
{
png_byte shift, sig_bit;
if (png_ptr->color_type & PNG_COLOR_MASK_COLOR)
{
sig_bit = png_ptr->sig_bit.red;
if (png_ptr->sig_bit.green > sig_bit)
sig_bit = png_ptr->sig_bit.green;
if (png_ptr->sig_bit.blue > sig_bit)
sig_bit = png_ptr->sig_bit.blue;
}
else
sig_bit = png_ptr->sig_bit.gray;
/* 16-bit gamma code uses this equation:
*
* ov = table[(iv & 0xff) >> gamma_shift][iv >> 8]
*
* Where 'iv' is the input color value and 'ov' is the output value -
* pow(iv, gamma).
*
* Thus the gamma table consists of up to 256 256 entry tables. The table
* is selected by the (8-gamma_shift) most significant of the low 8 bits of
* the color value then indexed by the upper 8 bits:
*
* table[low bits][high 8 bits]
*
* So the table 'n' corresponds to all those 'iv' of:
*
* <all high 8-bit values><n << gamma_shift>..<(n+1 << gamma_shift)-1>
*
*/
if (sig_bit > 0 && sig_bit < 16U)
shift = (png_byte)(16U - sig_bit); /* shift == insignificant bits */
else
shift = 0; /* keep all 16 bits */
if (png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8))
{
/* PNG_MAX_GAMMA_8 is the number of bits to keep - effectively
* the significant bits in the *input* when the output will
* eventually be 8 bits. By default it is 11.
*/
if (shift < (16U - PNG_MAX_GAMMA_8))
shift = (16U - PNG_MAX_GAMMA_8);
}
if (shift > 8U)
shift = 8U; /* Guarantees at least one table! */
png_ptr->gamma_shift = shift;
#ifdef PNG_16BIT_SUPPORTED
/* NOTE: prior to 1.5.4 this test used to include PNG_BACKGROUND (now
* PNG_COMPOSE). This effectively smashed the background calculation for
* 16-bit output because the 8-bit table assumes the result will be reduced
* to 8 bits.
*/
if (png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8))
#endif
png_build_16to8_table(png_ptr, &png_ptr->gamma_16_table, shift,
png_ptr->screen_gamma > 0 ? png_product2(png_ptr->colorspace.gamma,
png_ptr->screen_gamma) : PNG_FP_1);
#ifdef PNG_16BIT_SUPPORTED
else
png_build_16bit_table(png_ptr, &png_ptr->gamma_16_table, shift,
png_ptr->screen_gamma > 0 ? png_reciprocal2(png_ptr->colorspace.gamma,
png_ptr->screen_gamma) : PNG_FP_1);
#endif
#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \
defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \
defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)
if (png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY))
{
png_build_16bit_table(png_ptr, &png_ptr->gamma_16_to_1, shift,
png_reciprocal(png_ptr->colorspace.gamma));
/* Notice that the '16 from 1' table should be full precision, however
* the lookup on this table still uses gamma_shift, so it can't be.
* TODO: fix this.
*/
png_build_16bit_table(png_ptr, &png_ptr->gamma_16_from_1, shift,
png_ptr->screen_gamma > 0 ? png_reciprocal(png_ptr->screen_gamma) :
png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */);
}
#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */
}
}
#endif /* READ_GAMMA */
/* sRGB support */
#if defined PNG_SIMPLIFIED_READ_SUPPORTED ||\
defined PNG_SIMPLIFIED_WRITE_SUPPORTED
/* sRGB conversion tables; these are machine generated with the code in
* contrib/tools/makesRGB.c. The actual sRGB transfer curve defined in the
* specification (see the article at http://en.wikipedia.org/wiki/SRGB)
* is used, not the gamma=1/2.2 approximation use elsewhere in libpng.
* The sRGB to linear table is exact (to the nearest 16 bit linear fraction).
* The inverse (linear to sRGB) table has accuracies as follows:
*
* For all possible (255*65535+1) input values:
*
* error: -0.515566 - 0.625971, 79441 (0.475369%) of readings inexact
*
* For the input values corresponding to the 65536 16-bit values:
*
* error: -0.513727 - 0.607759, 308 (0.469978%) of readings inexact
*
* In all cases the inexact readings are off by one.
*/
#ifdef PNG_SIMPLIFIED_READ_SUPPORTED
/* The convert-to-sRGB table is only currently required for read. */
const png_uint_16 png_sRGB_table[256] =
{
0,20,40,60,80,99,119,139,
159,179,199,219,241,264,288,313,
340,367,396,427,458,491,526,562,
599,637,677,718,761,805,851,898,
947,997,1048,1101,1156,1212,1270,1330,
1391,1453,1517,1583,1651,1720,1790,1863,
1937,2013,2090,2170,2250,2333,2418,2504,
2592,2681,2773,2866,2961,3058,3157,3258,
3360,3464,3570,3678,3788,3900,4014,4129,
4247,4366,4488,4611,4736,4864,4993,5124,
5257,5392,5530,5669,5810,5953,6099,6246,
6395,6547,6700,6856,7014,7174,7335,7500,
7666,7834,8004,8177,8352,8528,8708,8889,
9072,9258,9445,9635,9828,10022,10219,10417,
10619,10822,11028,11235,11446,11658,11873,12090,
12309,12530,12754,12980,13209,13440,13673,13909,
14146,14387,14629,14874,15122,15371,15623,15878,
16135,16394,16656,16920,17187,17456,17727,18001,
18277,18556,18837,19121,19407,19696,19987,20281,
20577,20876,21177,21481,21787,22096,22407,22721,
23038,23357,23678,24002,24329,24658,24990,25325,
25662,26001,26344,26688,27036,27386,27739,28094,
28452,28813,29176,29542,29911,30282,30656,31033,
31412,31794,32179,32567,32957,33350,33745,34143,
34544,34948,35355,35764,36176,36591,37008,37429,
37852,38278,38706,39138,39572,40009,40449,40891,
41337,41785,42236,42690,43147,43606,44069,44534,
45002,45473,45947,46423,46903,47385,47871,48359,
48850,49344,49841,50341,50844,51349,51858,52369,
52884,53401,53921,54445,54971,55500,56032,56567,
57105,57646,58190,58737,59287,59840,60396,60955,
61517,62082,62650,63221,63795,64372,64952,65535
};
#endif /* simplified read only */
/* The base/delta tables are required for both read and write (but currently
* only the simplified versions.)
*/
const png_uint_16 png_sRGB_base[512] =
{
128,1782,3383,4644,5675,6564,7357,8074,
8732,9346,9921,10463,10977,11466,11935,12384,
12816,13233,13634,14024,14402,14769,15125,15473,
15812,16142,16466,16781,17090,17393,17690,17981,
18266,18546,18822,19093,19359,19621,19879,20133,
20383,20630,20873,21113,21349,21583,21813,22041,
22265,22487,22707,22923,23138,23350,23559,23767,
23972,24175,24376,24575,24772,24967,25160,25352,
25542,25730,25916,26101,26284,26465,26645,26823,
27000,27176,27350,27523,27695,27865,28034,28201,
28368,28533,28697,28860,29021,29182,29341,29500,
29657,29813,29969,30123,30276,30429,30580,30730,
30880,31028,31176,31323,31469,31614,31758,31902,
32045,32186,32327,32468,32607,32746,32884,33021,
33158,33294,33429,33564,33697,33831,33963,34095,
34226,34357,34486,34616,34744,34873,35000,35127,
35253,35379,35504,35629,35753,35876,35999,36122,
36244,36365,36486,36606,36726,36845,36964,37083,
37201,37318,37435,37551,37668,37783,37898,38013,
38127,38241,38354,38467,38580,38692,38803,38915,
39026,39136,39246,39356,39465,39574,39682,39790,
39898,40005,40112,40219,40325,40431,40537,40642,
40747,40851,40955,41059,41163,41266,41369,41471,
41573,41675,41777,41878,41979,42079,42179,42279,
42379,42478,42577,42676,42775,42873,42971,43068,
43165,43262,43359,43456,43552,43648,43743,43839,
43934,44028,44123,44217,44311,44405,44499,44592,
44685,44778,44870,44962,45054,45146,45238,45329,
45420,45511,45601,45692,45782,45872,45961,46051,
46140,46229,46318,46406,46494,46583,46670,46758,
46846,46933,47020,47107,47193,47280,47366,47452,
47538,47623,47709,47794,47879,47964,48048,48133,
48217,48301,48385,48468,48552,48635,48718,48801,
48884,48966,49048,49131,49213,49294,49376,49458,
49539,49620,49701,49782,49862,49943,50023,50103,
50183,50263,50342,50422,50501,50580,50659,50738,
50816,50895,50973,51051,51129,51207,51285,51362,
51439,51517,51594,51671,51747,51824,51900,51977,
52053,52129,52205,52280,52356,52432,52507,52582,
52657,52732,52807,52881,52956,53030,53104,53178,
53252,53326,53400,53473,53546,53620,53693,53766,
53839,53911,53984,54056,54129,54201,54273,54345,
54417,54489,54560,54632,54703,54774,54845,54916,
54987,55058,55129,55199,55269,55340,55410,55480,
55550,55620,55689,55759,55828,55898,55967,56036,
56105,56174,56243,56311,56380,56448,56517,56585,
56653,56721,56789,56857,56924,56992,57059,57127,
57194,57261,57328,57395,57462,57529,57595,57662,
57728,57795,57861,57927,57993,58059,58125,58191,
58256,58322,58387,58453,58518,58583,58648,58713,
58778,58843,58908,58972,59037,59101,59165,59230,
59294,59358,59422,59486,59549,59613,59677,59740,
59804,59867,59930,59993,60056,60119,60182,60245,
60308,60370,60433,60495,60558,60620,60682,60744,
60806,60868,60930,60992,61054,61115,61177,61238,
61300,61361,61422,61483,61544,61605,61666,61727,
61788,61848,61909,61969,62030,62090,62150,62211,
62271,62331,62391,62450,62510,62570,62630,62689,
62749,62808,62867,62927,62986,63045,63104,63163,
63222,63281,63340,63398,63457,63515,63574,63632,
63691,63749,63807,63865,63923,63981,64039,64097,
64155,64212,64270,64328,64385,64443,64500,64557,
64614,64672,64729,64786,64843,64900,64956,65013,
65070,65126,65183,65239,65296,65352,65409,65465
};
const png_byte png_sRGB_delta[512] =
{
207,201,158,129,113,100,90,82,77,72,68,64,61,59,56,54,
52,50,49,47,46,45,43,42,41,40,39,39,38,37,36,36,
35,34,34,33,33,32,32,31,31,30,30,30,29,29,28,28,
28,27,27,27,27,26,26,26,25,25,25,25,24,24,24,24,
23,23,23,23,23,22,22,22,22,22,22,21,21,21,21,21,
21,20,20,20,20,20,20,20,20,19,19,19,19,19,19,19,
19,18,18,18,18,18,18,18,18,18,18,17,17,17,17,17,
17,17,17,17,17,17,16,16,16,16,16,16,16,16,16,16,
16,16,16,16,15,15,15,15,15,15,15,15,15,15,15,15,
15,15,15,15,14,14,14,14,14,14,14,14,14,14,14,14,
14,14,14,14,14,14,14,13,13,13,13,13,13,13,13,13,
13,13,13,13,13,13,13,13,13,13,13,13,13,13,12,12,
12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,
12,12,12,12,12,12,12,12,12,12,12,12,11,11,11,11,
11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,
11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,
11,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
10,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
9,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,7,7,7,7,7,7,7,
7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
};
#endif /* SIMPLIFIED READ/WRITE sRGB support */
/* SIMPLIFIED READ/WRITE SUPPORT */
#if defined PNG_SIMPLIFIED_READ_SUPPORTED ||\
defined PNG_SIMPLIFIED_WRITE_SUPPORTED
static int
png_image_free_function(png_voidp argument)
{
png_imagep image = png_voidcast(png_imagep, argument);
png_controlp cp = image->opaque;
png_control c;
/* Double check that we have a png_ptr - it should be impossible to get here
* without one.
*/
if (cp->png_ptr == NULL)
return 0;
/* First free any data held in the control structure. */
# ifdef PNG_STDIO_SUPPORTED
if (cp->owned_file)
{
FILE *fp = png_voidcast(FILE*, cp->png_ptr->io_ptr);
cp->owned_file = 0;
/* Ignore errors here. */
if (fp != NULL)
{
cp->png_ptr->io_ptr = NULL;
(void)fclose(fp);
}
}
# endif
/* Copy the control structure so that the original, allocated, version can be
* safely freed. Notice that a png_error here stops the remainder of the
* cleanup, but this is probably fine because that would indicate bad memory
* problems anyway.
*/
c = *cp;
image->opaque = &c;
png_free(c.png_ptr, cp);
/* Then the structures, calling the correct API. */
if (c.for_write)
{
# ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED
png_destroy_write_struct(&c.png_ptr, &c.info_ptr);
# else
png_error(c.png_ptr, "simplified write not supported");
# endif
}
else
{
# ifdef PNG_SIMPLIFIED_READ_SUPPORTED
png_destroy_read_struct(&c.png_ptr, &c.info_ptr, NULL);
# else
png_error(c.png_ptr, "simplified read not supported");
# endif
}
/* Success. */
return 1;
}
void PNGAPI
png_image_free(png_imagep image)
{
/* Safely call the real function, but only if doing so is safe at this point
* (if not inside an error handling context). Otherwise assume
* png_safe_execute will call this API after the return.
*/
if (image != NULL && image->opaque != NULL &&
image->opaque->error_buf == NULL)
{
/* Ignore errors here: */
(void)png_safe_execute(image, png_image_free_function, image);
image->opaque = NULL;
}
}
int /* PRIVATE */
png_image_error(png_imagep image, png_const_charp error_message)
{
/* Utility to log an error. */
png_safecat(image->message, (sizeof image->message), 0, error_message);
image->warning_or_error |= PNG_IMAGE_ERROR;
png_image_free(image);
return 0;
}
#endif /* SIMPLIFIED READ/WRITE */
#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */