diff --git a/ANNOUNCE b/ANNOUNCE index b9391c1d6..73c332be5 100644 --- a/ANNOUNCE +++ b/ANNOUNCE @@ -1,114 +1,19 @@ -Libpng 1.2.6 - August 15, 2004 +Libpng 1.2.7beta1 - August 26, 2004 -This is a public release of libpng, intended for use in production codes. +This is not intended to be a public release. It will be replaced +within a few weeks by a public version or by another test version. -Changes since the last public release (1.2.5): +Changes since the last public release (1.2.6): - Commented out warning about uninitialized mmx_support in pnggccrd.c. - Changed "IBMCPP__" flag to "__IBMCPP__" in pngconf.h. - Relocated two more misplaced PNGAPI lines in pngtest.c - Fixed memory overrun bug in png_do_read_filler() with 16-bit datastreams, - introduced in version 1.0.2. - Fixed potential overrun in pngerror.c by using strncpy instead of memcpy. - Revised makefile.macosx, makefile.dec, makefile.aix, and makefile.32sunu. - Changed the one instance of "ln -sf" to "ln -f -s" in each Sun makefile. - Fixed potential overrun in pngerror.c by using strncpy instead of memcpy. - Added "#!/bin/sh" at the top of configure, for recognition of the - 'x' flag under Cygwin (Cosmin). - Optimized vacuous tests that silence compiler warnings, in png.c (Cosmin). - Added support for PNG_USER_CONFIG, in pngconf.h (Cosmin). - Fixed the special memory handler for Borland C under DOS, in pngmem.c - (Cosmin). - Removed some spurious assignments in pngrutil.c (Cosmin). - Replaced 65536 with 65536L, and 0xffff with 0xffffL, to silence warnings - on 16-bit platforms (Cosmin). - Enclosed shift op expressions in parentheses, to silence warnings (Cosmin). - Used proper type png_fixed_point, to avoid problems on 16-bit platforms, - in png_handle_sRGB() (Cosmin). - Added compression_type to png_struct, and optimized the window size - inside the deflate stream (Cosmin). - Fixed definition of isnonalpha(), in pngerror.c and pngrutil.c (Cosmin). - Fixed handling of unknown chunks that come after IDAT (Cosmin). - Allowed png_error() and png_warning() to work even if png_ptr == NULL - (Cosmin). - Replaced row_info->rowbytes with row_bytes in png_write_find_filter() - (Cosmin). - Fixed definition of PNG_LIBPNG_VER_DLLNUM (Simon-Pierre). - Used PNG_LIBPNG_VER and PNG_LIBPNG_VER_STRING instead of the hardcoded - values in png.c (Simon-Pierre, Cosmin). - Initialized png_libpng_ver[] with PNG_LIBPNG_VER_STRING (Simon-Pierre). - Replaced PNG_LIBPNG_VER_MAJOR with PNG_LIBPNG_VER_DLLNUM in png.rc - (Simon-Pierre). - Moved the definition of PNG_HEADER_VERSION_STRING near the definitions - of the other PNG_LIBPNG_VER_... symbols in png.h (Cosmin). - Relocated #ifndef PNGAPI guards in pngconf.h (Simon-Pierre, Cosmin). - Updated scripts/makefile.vc(a)win32 (Cosmin). - Updated the MSVC project (Simon-Pierre, Cosmin). - Updated the Borland C++ Builder project (Cosmin). - Avoided access to asm_flags in pngvcrd.c, if PNG_1_0_X is defined (Cosmin). - Commented out warning about uninitialized mmx_support in pngvcrd.c (Cosmin). - Removed scripts/makefile.bd32 and scripts/pngdef.pas (Cosmin). - Added extra guard around inclusion of Turbo C memory headers, in pngconf.h - (Cosmin). - Renamed projects/msvc/ to projects/visualc6/, and projects/borland/ to - projects/cbuilder5/ (Cosmin). - Moved projects/visualc6/png32ms.def to scripts/pngw32.def, - and projects/visualc6/png.rc to scripts/pngw32.rc (Cosmin). - Added projects/visualc6/pngtest.dsp; removed contrib/msvctest/ (Cosmin). - Updated contrib/visupng/VisualPng.dsp (Cosmin). - Updated contrib/visupng/cexcept.h to version 2.0.0 (Cosmin). - Added a separate distribution with "configure" and supporting files (Junichi). - Added user ability to change png_size_t via a PNG_SIZE_T macro. - Added png_sizeof() and png_convert_size() functions. - Added PNG_SIZE_MAX (maximum value of a png_size_t variable. - Added check in png_malloc_default() for (size_t)size != (png_uint_32)size - which would indicate an overflow. - Changed sPLT failure action from png_error to png_warning and abandon chunk. - Changed sCAL and iCCP failures from png_error to png_warning and abandon. - Added png_get_uint_31(png_ptr, buf) function. - Added PNG_UINT_32_MAX macro. - Renamed PNG_MAX_UINT to PNG_UINT_31_MAX. - Made png_zalloc() issue a png_warning and return NULL on potential - overflow. - Revised "clobber list" in pnggccrd.c so it will compile under gcc-3.4. - Revised Borland portion of png_malloc() to return NULL or issue - png_error() according to setting of PNG_FLAG_MALLOC_NULL_MEM_OK. - Added PNG_NO_SEQUENTIAL_READ_SUPPORTED macro to conditionally remove - sequential read support. - Added some "#if PNG_WRITE_SUPPORTED" blocks. - #ifdef'ed out some redundancy in png_malloc_default(). - Use png_malloc instead of png_zalloc to allocate the pallete. - Rearranged order of processing of color types in png_handle_tRNS(). - Added PNG_ROWBYTES macro to calculate rowbytes without integer overflow. - Updated makefile.darwin and removed makefile.macosx from scripts directory. - Imposed default one million column, one-million row limits on the image - dimensions, and added png_set_user_limits() function and - PNG_SET_USER_LIMITS_SUPPORTED macro to override them. - Fixed wrong cast of returns from png_get_user_width|height_max(). - Fixed buffer overflow vulnerability in png_handle_tRNS() - Fixed integer arithmetic overflow vulnerability in png_read_png(). - Fixed some harmless bugs in png_handle_sBIT, etc, that would cause - duplicate chunk types to go undetected. - Changed some "keep the compiler happy" from empty statements to returns, -Revised libpng.txt to remove 1.2.x stuff from the 1.0.x distribution - Revised makefile.darwin and makefile.solaris. Removed makefile.macosx. - Revised pngtest's png_debug_malloc() to use png_malloc() instead of - png_malloc_default() which is not supposed to be exported. - Fixed old bug in RGB to Gray transformation. - Fixed problem with 64-bit compilers by casting arguments to abs() - to png_int_32. - Changed "ln -sf" to "ln -f -s" in three makefiles (solaris, sco, so9). - Changed "HANDLE_CHUNK_*" to "PNG_HANDLE_CHUNK_*" (Cosmin) - Added "-@/bin/rm -f $(DL)/$(LIBNAME).so.$(PNGMAJ)" to 15 *NIX makefiles. - Added code to update the row_info->colortype in png_do_read_filler() (MSB). - Eliminated use of "abs()" in testing cHRM and gAMA values, to avoid - trouble with some 64-bit compilers. Created PNG_OUT_OF_RANGE() macro. - Revised documentation of png_set_keep_unknown_chunks(). - Check handle_as_unknown status in pngpread.c, as in pngread.c previously. - Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_INTERNAL section of png.h - Added "rim" definitions for CONST4 and CONST6 in pnggccrd.c +version 1.2.7beta1 [August 26, 2004] Revised pngtest so memory allocation testing is only done when PNG_DEBUG==1. + Removed unused pngasmrd.h file. + Removed unused pngasmrd.h file. + Removed references to uu.net for archived files. Added references to + PNG Spec (second edition) and the PNG ISO/IEC Standard. + Added "test-dd" target in 15 makefiles, to run pngtest in DESTDIR. + Fixed bug with "optimized window size" in the IDAT datastream. Send comments/corrections/commendations to png-implement@ccrc.wustl.edu or to glennrp@users.sourceforge.net diff --git a/CHANGES b/CHANGES index 980538cda..ae7933275 100644 --- a/CHANGES +++ b/CHANGES @@ -4,6 +4,7 @@ CHANGES - changes for libpng version 0.2 added reader into png.h fixed small problems in stub file + version 0.3 added pull reader split up pngwrite.c to several files @@ -14,6 +15,7 @@ version 0.3 interfaced with zlib 0.5 added K&R support added check for 64 KB blocks for 16 bit machines + version 0.4 cleaned up code and commented code simplified time handling into png_time @@ -24,23 +26,28 @@ version 0.4 interfaced with zlib 0.71 cleaned up zTXt reader and writer (using zlib's Reset functions) split transformations into pngrtran.c and pngwtran.c + version 0.5 interfaced with zlib 0.8 fixed many reading and writing bugs saved using 3 spaces instead of tabs + version 0.6 added png_large_malloc() and png_large_free() added png_size_t cleaned up some compiler warnings added png_start_read_image() + version 0.7 cleaned up lots of bugs finished dithering and other stuff added test program changed name from pnglib to libpng + version 0.71 [June, 1995] changed pngtest.png for zlib 0.93 fixed error in libpng.txt and example.c + version 0.8 cleaned up some bugs added png_set_filler() @@ -57,27 +64,34 @@ version 0.8 enabled png_set_shift to work with paletted images on read added png_read_update_info() - updates info structure with transformations + version 0.81 [August, 1995] incorporated Tim Wegner's medium model code (thanks, Tim) + version 0.82 [September, 1995] [unspecified changes] + version 0.85 [December, 1995] added more medium model code (almost everything's a far) added i/o, error, and memory callback functions fixed some bugs (16 bit, 4 bit interlaced, etc.) added first run progressive reader (barely tested) + version 0.86 [January, 1996] fixed bugs improved documentation + version 0.87 [January, 1996] fixed medium model bugs fixed other bugs introduced in 0.85 and 0.86 added some minor documentation + version 0.88 [January, 1996] fixed progressive bugs replaced tabs with spaces cleaned up documentation added callbacks for read/write and warning/error functions + version 0.89 [July, 1996] added new initialization API to make libpng work better with shared libs we now have png_create_read_struct(), png_create_write_struct(), @@ -104,6 +118,7 @@ version 0.89 [July, 1996] into a binary when only reading or writing functionality is used new pngtest image also has interlacing and zTXt updated documentation to reflect new API + version 0.90 [January, 1997] made CRC errors/warnings on critical and ancillary chunks configurable libpng will use the zlib CRC routines by (compile-time) default @@ -125,6 +140,7 @@ version 0.90 [January, 1997] be able to handle all chunks via a callback mechanism try to fix Linux "setjmp" buffer size problems removed png_large_malloc, png_large_free, and png_realloc functions. + version 0.95 [March, 1997] fixed bug in pngwutil.c allocating "up_row" twice and "avg_row" never fixed bug in PNG file signature compares when start != 0 @@ -159,6 +175,7 @@ version 0.95 [March, 1997] functions in pngget.c to get infomation in info_ptr. This isolates the application from the internal organization of png_info_struct (good for shared library implementations). + version 0.96 [May, 1997] fixed serious bug with < 8bpp images introduced in 0.95 fixed 256-color transparency bug (Greg Roelofs) @@ -169,6 +186,7 @@ version 0.96 [May, 1997] added read of CRC after IEND chunk for embedded PNGs (Laszlo Nyul) added typecasts to quiet compiler errors added more debugging info + version 0.97 [January, 1998] removed PNG_USE_OWN_CRC capability relocated png_set_crc_action from pngrutil.c to pngrtran.c @@ -191,6 +209,7 @@ version 0.97 [January, 1998] added "-m" option and PNGTEST_DEBUG_MEMORY to pngtest (John Bowler) regularized version numbering scheme and bumped shared-library major version number to 2 to avoid problems with libpng 0.89 apps (Greg Roelofs) + version 0.98 [January, 1998] cleaned up some typos in libpng.txt and in code documentation fixed memory leaks in pCAL chunk processing (Glenn R-P and John Bowler) @@ -202,6 +221,7 @@ version 0.98 [January, 1998] PNG_TIME_RFC1152_SUPPORTED macro to PNG_TIME_RFC1123_SUPPORTED added png_invert_alpha capability (Glenn R-P -- suggestion by Jon Vincent) changed srgb_intent from png_byte to int to avoid compiler bugs + version 0.99 [January 30, 1998] free info_ptr->text instead of end_info_ptr->text in pngread.c (John Bowler) fixed a longstanding "packswap" bug in pngtrans.c @@ -262,6 +282,7 @@ version 0.99h [March 6, 1998, evening] Changed PNG_READ_NOT_FULLY_SUPPORTED to PNG_READ_TRANSFORMS_NOT_SUPPORTED and added PNG_PROGRESSIVE_READ_NOT_SUPPORTED macro Added user transform capability + version 1.00 [March 7, 1998] Changed several typedefs in pngrutil.c Added makefile.wat (Pawel Mrochen), updated makefile.tc3 (Willem van Schaik) @@ -271,6 +292,7 @@ version 1.00 [March 7, 1998] changed some typedefs (s_start, etc.) in pngrutil.c fixed dimensions of "short_months" array in pngwrite.c Replaced ansi2knr.c with the one from jpeg-v6 + version 1.0.0 [March 8, 1998] Changed name from 1.00 to 1.0.0 (Adam Costello) Added smakefile.ppc (with SCOPTIONS.ppc) for Amiga PPC (Andreas Kleinert) @@ -285,6 +307,7 @@ version 1.0.0b [March 13, 1998] Quieted compiler complaints about two empty "for" loops in pngrutil.c Minor changes to makefile.s2x Removed #ifdef/#endif around a png_free() in pngread.c + version 1.0.1 [March 14, 1998] Changed makefile.s2x to reduce security risk of using a relative pathname Fixed some typos in the documentation (Greg). @@ -353,6 +376,7 @@ version 1.0.1e [June 6, 1998] and revised pngtest.c to demonstrate their use, replacing the PNGTEST_DEBUG_MEM feature. Added makefile.w32, for Microsoft C++ 4.0 and later (Tim Wegner). + version 1.0.2 [June 14, 1998] Fixed two bugs in makefile.bor . version 1.0.2a [December 30, 1998] @@ -387,6 +411,7 @@ version 1.0.2a [January 6, 1999] Changed "check_if_png" function in example.c to return true (nonzero) if PNG. Changed libpng.txt to demonstrate png_sig_cmp() instead of png_check_sig() which is obsolete. + version 1.0.3 [January 14, 1999] Added makefile.hux, for Hewlett Packard HPUX 10.20 and 11.00 (Jim Rice) Added a statement of Y2K compliance in png.h, libpng.3, and Y2KINFO. @@ -439,6 +464,7 @@ version 1.0.3d [September 4, 1999] Fixed type casting of igamma in pngrutil.c Added new png_expand functions to scripts/pngdef.pas and pngos2.def Added a demo read_user_transform_fn that examines the row filters in pngtest.c + version 1.0.4 [September 24, 1999] Define PNG_ALWAYS_EXTERN in pngconf.h if __STDC__ is defined Delete #define PNG_INTERNAL and include "png.h" from pngasmrd.h @@ -477,6 +503,7 @@ version 1.0.4f [October 15, 1999] Added type casting mostly in pngrtran.c and pngwtran.c Removed some pointless "ptr = NULL" in pngmem.c Added a "contrib" directory containing the source code from Greg's book. + version 1.0.5 [October 15, 1999] Minor editing of the INSTALL and README files. version 1.0.5a [October 23, 1999] @@ -660,6 +687,7 @@ version 1.0.5v [March 11, 2000] Updated documentation of png_rgb_to_gray calculations in libpng.3/libpng.txt. Renamed makefile.borland,turboc3 back to makefile.bor,tc3 as in version 1.0.3, revised borland makefiles; added makefile.ibmvac3 and makefile.gcc (Cosmin) + version 1.0.6 [March 20, 2000] Minor revisions of makefile.bor, libpng.txt, and gregbook/rpng2-win.c Added makefile.sggcc (SGI IRIX with gcc) @@ -798,6 +826,7 @@ version 1.0.7beta18 [June 23, 2000] version 1.0.7rc2 [June 28, 2000] Updated license to include disclaimers required by UCITA. Fixed "DJBPP" typo in pnggccrd.c introduced in beta18. + version 1.0.7 [July 1, 2000] Revised the definition of "trans_values" in libpng.3/libpng.txt version 1.0.8beta1 [July 8, 2000] @@ -822,6 +851,7 @@ version 1.0.8beta4 [July 14, 2000] Added PNG_NO_ZALLOC_ZERO macro (makes png_zalloc skip zeroing memory) version 1.0.8rc1 [July 16, 2000] Revised png_debug() macros and statements to eliminate compiler warnings. + version 1.0.8 [July 24, 2000] Added png_flush() in pngwrite.c, after png_write_IEND(). Updated makefile.hpux to build a shared library. @@ -892,6 +922,7 @@ version 1.0.9beta11 [January 19, 2001] be re-enabled in version 1.2.0. version 1.0.9rc2 [January 22, 2001] Revised cygwin support. + version 1.0.9 [January 31, 2001] Added check of cygwin's ALL_STATIC in pngconf.h Added "-nommx" parameter to contrib/gregbook/rpng2-win and rpng2-x demos. @@ -913,6 +944,7 @@ version 1.0.10rc1 [March 23, 2001] and png_strlen. Revised png_mmx_supported() function in pnggccrd.c to return proper value. Fixed bug in progressive reading (pngpread.c) with small images (height < 8). + version 1.0.10 [March 30, 2001] Deleted extraneous space (introduced in 1.0.9) from line 42 of makefile.cygwin Added beos project files (Chris Herborth) @@ -930,6 +962,7 @@ version 1.0.11beta4 [April 20, 2001] from user's malloc_fn(). Removed some useless type casts of the NULL pointer. Added makefile.netbsd + version 1.0.11 [April 27, 2001] Revised makefile.netbsd version 1.0.12beta1 [May 14, 2001] @@ -978,6 +1011,7 @@ version 1.2.0beta5 [August 8, 2001] Revised makefile.sgi and makefile.sggcc Replaced calls to fprintf(stderr,...) with png_warning() in pnggccrd.c Removed restriction that do_invert_mono only operate on 1-bit opaque files + version 1.2.0 [September 1, 2001] Changed a png_warning() to png_debug() in pnggccrd.c Fixed contrib/gregbook/rpng-x.c, rpng2-x.c to avoid crash with XFreeGC(). @@ -1011,6 +1045,7 @@ version 1.2.1rc2 [December 4, 2001] Always allocate 256-entry internal palette, hist, and trans arrays, to avoid out-of-bounds memory reference caused by invalid PNG datastreams. Added a check for prefix_length > data_length in iCCP chunk handler. + version 1.2.1 [December 7, 2001] None. version 1.2.2beta1 [February 22, 2002] @@ -1064,6 +1099,7 @@ version 1.0.13rc1 [April 7, 2002] Save the ebx register in pnggccrd.c (Sami Farin) Add "mem_ptr = png_ptr->mem_ptr" in png_destroy_write_struct() (Paul Gardner). Updated makefiles to put headers in include/libpng and remove old include/*.h. + version 1.2.2 [April 15, 2002] version 1.0.13 [April 15, 2002] Revised description of png_set_filter() in libpng.3/libpng.txt. @@ -1118,6 +1154,7 @@ version 1.2.3rc6 [May 14, 2002] Changed "Gz" to "Gd" in projects/msvc/libpng.dsp and zlib.dsp. Removed leftover libpng-config "sed" script from four makefiles. Revised libpng-config creating script in 16 makefiles. + version 1.2.3 [May 22, 2002] Revised libpng-config target in makefile.cygwin. Removed description of png_set_mem_fn() from documentation. @@ -1147,6 +1184,7 @@ version 1.2.4beta3 [June 28, 2002] version 1.2.4rc1 and 1.0.14rc1 [July 2, 2002] Added "test-installed" target to makefile.cygwin and makefile.sco. Revised pnggccrd.c to be able to back out version 1.0.x via PNG_1_0_X macro. + version 1.2.4 and 1.0.14 [July 8, 2002] Changed png_warning() to png_error() when width is too large to process. version 1.2.4patch01 [July 20, 2002] @@ -1173,6 +1211,7 @@ version 1.2.5rc2 and 1.0.15rc2 [September 16, 2002] Added missing "; fi" to makefile.32sunu. version 1.2.5rc3 and 1.0.15rc3 [September 18, 2002] Revised libpng-config script. + version 1.2.5 and 1.0.15 [October 3, 2002] Revised makefile.macosx, makefile.darwin, makefile.hpgcc, and makefile.hpux, and makefile.aix. @@ -1263,7 +1302,7 @@ version 1.2.6beta4 [July 28, 2004] Added some "#if PNG_WRITE_SUPPORTED" blocks. #ifdef'ed out some redundancy in png_malloc_default(). Use png_malloc instead of png_zalloc to allocate the pallete. -version 1.2.6rc1 [August 4, 2004] +version 1.0.16rc1 and 1.2.6rc1 [August 4, 2004] Fixed buffer overflow vulnerability in png_handle_tRNS() Fixed integer arithmetic overflow vulnerability in png_read_png(). Fixed some harmless bugs in png_handle_sBIT, etc, that would cause @@ -1277,7 +1316,7 @@ version 1.2.6rc1 [August 4, 2004] Revised use of PNG_SET_USER_LIMITS_SUPPORTED macro. Fixed wrong cast of returns from png_get_user_width|height_max(). Changed some "keep the compiler happy" from empty statements to returns, -version 1.2.6rc2 [August 7, 2004] +version 1.0.16rc2 and 1.2.6rc2 [August 7, 2004] Revised makefile.darwin and makefile.solaris. Removed makefile.macosx. Revised pngtest's png_debug_malloc() to use png_malloc() instead of png_malloc_default() which is not supposed to be exported. @@ -1291,21 +1330,28 @@ version 1.2.6rc2 [August 7, 2004] Changed "HANDLE_CHUNK_*" to "PNG_HANDLE_CHUNK_*" (Cosmin) Added "-@/bin/rm -f $(DL)/$(LIBNAME).so.$(PNGMAJ)" to 15 *NIX makefiles. Added code to update the row_info->colortype in png_do_read_filler() (MSB). -version 1.2.6rc3 [August 9, 2004] +version 1.0.16rc3 and 1.2.6rc3 [August 9, 2004] Eliminated use of "abs()" in testing cHRM and gAMA values, to avoid trouble with some 64-bit compilers. Created PNG_OUT_OF_RANGE() macro. Revised documentation of png_set_keep_unknown_chunks(). Check handle_as_unknown status in pngpread.c, as in pngread.c previously. Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_INTERNAL section of png.h Added "rim" definitions for CONST4 and CONST6 in pnggccrd.c -version 1.2.6rc4 [August 10, 2004] +version 1.0.16rc4 and 1.2.6rc4 [August 10, 2004] Fixed mistake in pngtest.c introduced in 1.2.6rc2 (declaration of "pinfo" was out of place). -version 1.2.6rc5 [August 10, 2004] +version 1.0.16rc5 and 1.2.6rc5 [August 10, 2004] Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_ASSEMBLER_CODE_SUPPORTED section of png.h where they were inadvertently placed in version rc3. -version 1.2.6rc6 [August 15, 2004] + +version 1.0.16 and 1.2.6 [August 15, 2004] Revised pngtest so memory allocation testing is only done when PNG_DEBUG==1. +version 1.2.7beta1 [August 26, 2004] + Removed unused pngasmrd.h file. + Removed references to uu.net for archived files. Added references to + PNG Spec (second edition) and the PNG ISO/IEC Standard. + Added "test-dd" target in 15 makefiles, to run pngtest in DESTDIR. + Fixed bug with "optimized window size" in the IDAT datastream. Send comments/corrections/commendations to png-implement@ccrc.wustl.edu or to glennrp@users.sourceforge.net diff --git a/INSTALL b/INSTALL index f60802e6f..10bf57104 100644 --- a/INSTALL +++ b/INSTALL @@ -1,5 +1,5 @@ -Installing libpng version 1.2.6 - %DATE% +Installing libpng version 1.2.7beta1 - August 26, 2004 Before installing libpng, you must first install zlib. zlib can usually be found wherever you got libpng. zlib can be @@ -10,8 +10,8 @@ zlib.h and zconf.h include files that correspond to the version of zlib that's installed. You can rename the directories that you downloaded (they -might be called "libpng-1.2.6" or "lpng109" and "zlib-1.1.3" -or "zlib113") so that you have directories called "zlib" and "libpng". +might be called "libpng-1.2.7beta1" or "lpng109" and "zlib-1.2.1" +or "zlib121") so that you have directories called "zlib" and "libpng". Your directory structure should look like this: @@ -23,14 +23,13 @@ Your directory structure should look like this: *.c contrib gregbook - msvctest pngminus pngsuite visupng projects beos - borland - msvc + c5builder (Borland) + visualc6 (msvc) netware.txt wince.txt scripts @@ -48,13 +47,16 @@ If the line endings in the files look funny, you may wish to get the other distribution of libpng. It is available in both tar.gz (UNIX style line endings) and zip (DOS style line endings) formats. -If you are building libpng with MSVC, you can enter the libpng\msvc directory -and follow the instructions in msvc\README.txt. -You can build libpng for WindowsCE by entering the downloading and installing -the libpng\wince directory as instructed in the projects\wince.txt file, and +If you are building libpng with MSVC, you can enter the +libpng projects\visualc6 directory and follow the instructions in +projects\visualc6\README.txt. + +You can build libpng for WindowsCE by downloading and installing +the projects\wince directory as instructed in the projects\wince.txt file, and then following the instructions in the README* files. Similarly, you can -build libpng for Netware as instructed in projects\netware.txt. +build libpng for Netware or Beos as instructed in projects\netware.txt +or projects\beos. Else enter the zlib directory and follow the instructions in zlib/README, then come back here and choose the appropriate makefile.sys in the scripts @@ -64,8 +66,10 @@ The files that are presently available in the scripts directory include makefile.std => Generic UNIX makefile (cc, creates static libpng.a) - makefile.linux => Linux/ELF makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.6) - makefile.gcmmx => Linux/ELF makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.6, + makefile.linux => Linux/ELF makefile + (gcc, creates libpng12.so.0.1.2.7beta1) + makefile.gcmmx => Linux/ELF makefile + (gcc, creates libpng12.so.0.1.2.7beta1, uses assembler code tuned for Intel MMX platform) makefile.gcc => Generic makefile (gcc, creates static libpng.a) makefile.knr => Archaic UNIX Makefile that converts files with @@ -73,23 +77,26 @@ include ftp://ftp.cs.wisc.edu/ghost) makefile.aix => AIX/gcc makefile makefile.cygwin => Cygwin/gcc makefile - makefile.darwin => Darwin makefile + makefile.darwin => Darwin makefile, can use on MacosX makefile.dec => DEC Alpha UNIX makefile - makefile.hpgcc => FreeBSD makefile + makefile.freebsd => FreeBSD makefile makefile.hpgcc => HPUX makefile using gcc makefile.hpux => HPUX (10.20 and 11.00) makefile makefile.ibmc => IBM C/C++ version 3.x for Win32 and OS/2 (static) makefile.intel => Intel C/C++ version 4.0 and later libpng.icc => Project file for IBM VisualAge/C++ version 4.0 or later - makefile.macosx => MACOS X Makefile makefile.netbsd => NetBSD/cc makefile, uses PNGGCCRD, makes libpng.so. - makefile.ne%SONUM%bsd => NetBSD/cc makefile, uses PNGGCCRD, makes libpng%SONUM%.so + makefile.ne0bsd => NetBSD/cc makefile, uses PNGGCCRD, + makes libpng0.so makefile.openbsd => OpenBSD makefile makefile.sgi => Silicon Graphics IRIX makefile (cc, creates static lib) - makefile.sggcc => Silicon Graphics (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.6) + makefile.sggcc => Silicon Graphics (gcc, + creates libpng12.so.0.1.2.7beta1) makefile.sunos => Sun makefile - makefile.solaris => Solaris 2.X makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.6) - makefile.so9 => Solaris 9 makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.6) + makefile.solaris => Solaris 2.X makefile (gcc, + creates libpng12.so.0.1.2.7beta1) + makefile.so9 => Solaris 9 makefile (gcc, + creates libpng12.so.0.1.2.7beta1) makefile.32sunu => Sun Ultra 32-bit makefile makefile.64sunu => Sun Ultra 64-bit makefile makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc @@ -130,13 +137,13 @@ target directories to match your preferences. Then read pngconf.h to see if you want to make any configuration changes. -Then just run "make test" which will create the libpng library in -this directory and run a quick test that reads the "pngtest.png" -file and writes a "pngout.png" file that should be identical to it. -Look for "9782 zero samples" in the output of the test. For more -confidence, you can run another test by typing "pngtest pngnow.png" -and looking for "289 zero samples" in the output. Also, you can -run "pngtest -m *.png" in the "contrib/pngsuite" directory and compare +Then just run "make" which will create the libpng library in +this directory and "make test" which will run a quick test that reads +the "pngtest.png" file and writes a "pngout.png" file that should be +identical to it. Look for "9782 zero samples" in the output of the +test. For more confidence, you can run another test by typing +"pngtest pngnow.png" and looking for "289 zero samples" in the output. +Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare your output with the result shown in contrib/pngsuite/README. Most of the makefiles will allow you to run "make install" to @@ -145,26 +152,17 @@ do that, run "make install" in the zlib directory first if necessary). Some also allow you to run "make test-installed" after you have run "make install". +If you encounter a compiler error message complaining about the +lines + __png.h__ already includes setjmp.h; + __dont__ include it again.; +This means you have compiled another module that includes setjmp.h, +which is hazardous because the two modules might not include exactly +the same setjmp.h. If you are sure that you know what you are doing +and that they are exactly the same, then you can comment out or +delete the two lines. Better yet, use the cexcept interface +instead, as demonstrated in contrib/visupng of the libpng distribution. + Further information can be found in the README and libpng.txt -files, in the individual makefiles, in png.h, in the README files in -subdirectories of the LIB directory, and the manual pages libpng.3 and png.5. - - -Using the ./configure script -- 16 December 2002. -================================================= - - -The ./configure script should work compatibly with what scripts/makefile.* -did, however there are some options you need to add to configure explicitly, -which previously was done semi-automatically (if you didn't edit -scripts/makefile.* yourself, that is) - - -CFLAGS="-Wall -O3 -funroll-loops \ --malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \ ---with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include - -You can alternatively specify --includedir=/usr/include, /usr/local/include, -/usr/include/png12, or whatever. - - +files, in the individual makefiles, in png.h, and the manual pages +libpng.3 and png.5. diff --git a/KNOWNBUG b/KNOWNBUG index 01e0d3a7b..78a73d45b 100644 --- a/KNOWNBUG +++ b/KNOWNBUG @@ -1,5 +1,5 @@ -Known bugs in libpng version 1.2.6 +Known bugs in libpng version 1.2.7beta1 1. April 22, 2001: pnggccrd.c has been reported to crash on NetBSD when reading interlaced PNG files, when assembler code is enabled but running diff --git a/LICENSE b/LICENSE index 65c9d4678..70ba9a0d3 100644 --- a/LICENSE +++ b/LICENSE @@ -8,7 +8,7 @@ COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. -libpng version 1.2.6, August 15, 2004, is +libpng version 1.2.6, August 26, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors @@ -106,4 +106,4 @@ certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp@users.sourceforge.net -August 15, 2004 +August 26, 2004 diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index 027be0650..000000000 --- a/Makefile.am +++ /dev/null @@ -1,66 +0,0 @@ -# test -check_PROGRAMS= pngtest -pngtest_SOURCES = pngtest.c -pngtest_LDADD = libpng.la -TESTS = test-pngtest.sh -TESTS_ENVIRONMENT= srcdir=$(srcdir) -dist_man_MANS= libpng.3 libpngpf.3 png.5 -include_HEADERS= png.h pngconf.h -bin_SCRIPTS=libpng-config libpng12-config - -#rules to build libpng -lib_LTLIBRARIES=libpng12.la libpng.la -libpng12_la_SOURCES = png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ - pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ - pngwtran.c pngmem.c pngerror.c pngpread.c \ - png.h pngconf.h -libpng_la_SOURCES = $(libpng12_la_SOURCES) -libpng12_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG12_VERSION_INFO) -libpng_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG3_VERSION_INFO) - -#distribute headers in /usr/include/libpng/* -pkginclude_HEADERS= png.h pngconf.h - -#extra source distribution files. -EXTRA_DIST= ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \ - pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ - ${srcdir}/projects/cbuilder5/* ${srcdir}/projects/beos/* ${srcdir}/projects/visualc6/* \ - ${srcdir}/projects/wince.txt ${srcdir}/projects/netware.txt \ - ${srcdir}/scripts/* \ - ${srcdir}/contrib/gregbook/* \ - ${srcdir}/contrib/pngminus/* \ - ${srcdir}/contrib/pngsuite/* \ - ${srcdir}/contrib/visupng/* \ - $(TESTS) \ - example.c libpng.txt pngasmrd.h pnggccrd.c pngvcrd.c - -CLEANFILES= pngout.png libpng.pc libpng12.pc libpng-config libpng12-config - - -libpng.pc: - cat ${srcdir}/scripts/libpng.pc.in | \ - sed -e 's,[@]PREFIX[@],$(prefix),' -e 's,[@]INCLUDEDIR[@],$(includedir),' > libpng.pc - -libpng12.pc: libpng.pc - cp libpng.pc libpng12.pc - -install-data-local: libpng.pc libpng12.pc - @INSTALL@ -d @PKGCONFIGDIR@ - @INSTALL_DATA@ libpng.pc @PKGCONFIGDIR@ - @INSTALL_DATA@ libpng12.pc @PKGCONFIGDIR@ - -uninstall-local: - rm -f @PKGCONFIGDIR@/libpng.pc - rm -f @PKGCONFIGDIR@/libpng12.pc - -libpng-config: - ( cat ${srcdir}/scripts/libpng-config-head.in; \ - echo prefix=\"$(prefix)\"; \ - echo I_opts=\"-I$(includedir)\"; \ - echo L_opts=\"-L$(libdir)\"; \ - echo R_opts=\"-Wl,-rpath,$(libdir)\"; \ - echo libs=\"-lpng12 -lz -lm\"; \ - cat ${srcdir}/scripts/libpng-config-body.in ) > libpng-config - -libpng12-config: libpng-config - cp libpng-config libpng12-config diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index f845e2dea..000000000 --- a/Makefile.in +++ /dev/null @@ -1,898 +0,0 @@ -# Makefile.in generated by automake 1.7.2 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_triplet = @host@ -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO = @ECHO@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBPNG12_VERSION_INFO = @LIBPNG12_VERSION_INFO@ -LIBPNG3_VERSION_INFO = @LIBPNG3_VERSION_INFO@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKGCONFIGDIR = @PKGCONFIGDIR@ -POW_LIB = @POW_LIB@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__quote = @am__quote@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ - -# test -check_PROGRAMS = pngtest -pngtest_SOURCES = pngtest.c -pngtest_LDADD = libpng.la -TESTS = test-pngtest.sh -TESTS_ENVIRONMENT = srcdir=$(srcdir) -dist_man_MANS = libpng.3 libpngpf.3 png.5 -include_HEADERS = png.h pngconf.h -bin_SCRIPTS = libpng-config libpng12-config - -#rules to build libpng -lib_LTLIBRARIES = libpng12.la libpng.la -libpng12_la_SOURCES = png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ - pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ - pngwtran.c pngmem.c pngerror.c pngpread.c \ - png.h pngconf.h - -libpng_la_SOURCES = $(libpng12_la_SOURCES) -libpng12_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG12_VERSION_INFO) -libpng_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG3_VERSION_INFO) - -#distribute headers in /usr/include/libpng/* -pkginclude_HEADERS = png.h pngconf.h - -#extra source distribution files. -EXTRA_DIST = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \ - pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ - ${srcdir}/projects/borland/* ${srcdir}/projects/beos/* ${srcdir}/projects/msvc/* \ - ${srcdir}/projects/wince.txt ${srcdir}/projects/netware.txt \ - ${srcdir}/scripts/* \ - ${srcdir}/contrib/gregbook/* \ - ${srcdir}/contrib/msvctest/* \ - ${srcdir}/contrib/pngminus/* \ - ${srcdir}/contrib/pngsuite/* \ - ${srcdir}/contrib/visupng/* \ - $(TESTS) \ - example.c libpng.txt pngasmrd.h pnggccrd.c pngvcrd.c - - -CLEANFILES = pngout.png libpng.pc libpng12.pc libpng-config libpng12-config -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(lib_LTLIBRARIES) - -libpng_la_LIBADD = -am__objects_1 = png.lo pngset.lo pngget.lo pngrutil.lo pngtrans.lo \ - pngwutil.lo pngread.lo pngrio.lo pngwio.lo pngwrite.lo \ - pngrtran.lo pngwtran.lo pngmem.lo pngerror.lo pngpread.lo -am_libpng_la_OBJECTS = $(am__objects_1) -libpng_la_OBJECTS = $(am_libpng_la_OBJECTS) -libpng12_la_LIBADD = -am_libpng12_la_OBJECTS = png.lo pngset.lo pngget.lo pngrutil.lo \ - pngtrans.lo pngwutil.lo pngread.lo pngrio.lo pngwio.lo \ - pngwrite.lo pngrtran.lo pngwtran.lo pngmem.lo pngerror.lo \ - pngpread.lo -libpng12_la_OBJECTS = $(am_libpng12_la_OBJECTS) -check_PROGRAMS = pngtest$(EXEEXT) -am_pngtest_OBJECTS = pngtest.$(OBJEXT) -pngtest_OBJECTS = $(am_pngtest_OBJECTS) -pngtest_DEPENDENCIES = libpng.la -pngtest_LDFLAGS = -SCRIPTS = $(bin_SCRIPTS) - - -DEFAULT_INCLUDES = -I. -I$(srcdir) -I. -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/png.Plo ./$(DEPDIR)/pngerror.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngget.Plo ./$(DEPDIR)/pngmem.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngpread.Plo ./$(DEPDIR)/pngread.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngrio.Plo ./$(DEPDIR)/pngrtran.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngrutil.Plo ./$(DEPDIR)/pngset.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngtest.Po ./$(DEPDIR)/pngtrans.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngwio.Plo ./$(DEPDIR)/pngwrite.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/pngwtran.Plo ./$(DEPDIR)/pngwutil.Plo -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -DIST_SOURCES = $(libpng_la_SOURCES) $(libpng12_la_SOURCES) \ - $(pngtest_SOURCES) - -NROFF = nroff -MANS = $(dist_man_MANS) -HEADERS = $(include_HEADERS) $(pkginclude_HEADERS) - -DIST_COMMON = README $(dist_man_MANS) $(include_HEADERS) \ - $(pkginclude_HEADERS) INSTALL Makefile.am Makefile.in TODO \ - aclocal.m4 config.guess config.h.in config.sub configure \ - configure.ac depcomp install-sh ltmain.sh missing mkinstalldirs -SOURCES = $(libpng_la_SOURCES) $(libpng12_la_SOURCES) $(pngtest_SOURCES) - -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj - -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) - -$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) - cd $(srcdir) && $(AUTOCONF) - -$(ACLOCAL_M4): configure.ac - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h - -$(srcdir)/config.h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOHEADER) - touch $(srcdir)/config.h.in - -distclean-hdr: - -rm -f config.h stamp-h1 -libLTLIBRARIES_INSTALL = $(INSTALL) -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libdir) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ - else :; fi; \ - done - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" = "$$p" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libpng.la: $(libpng_la_OBJECTS) $(libpng_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libpng_la_LDFLAGS) $(libpng_la_OBJECTS) $(libpng_la_LIBADD) $(LIBS) -libpng12.la: $(libpng12_la_OBJECTS) $(libpng12_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libpng12_la_LDFLAGS) $(libpng12_la_OBJECTS) $(libpng12_la_LIBADD) $(LIBS) - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES) - @rm -f pngtest$(EXEEXT) - $(LINK) $(pngtest_LDFLAGS) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS) -binSCRIPT_INSTALL = $(INSTALL_SCRIPT) -install-binSCRIPTS: $(bin_SCRIPTS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_SCRIPTS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f $$d$$p; then \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \ - $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(bin_SCRIPTS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ -@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ -@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ -@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ -@am__fastdepCC_TRUE@ fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ -@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \ -@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ -@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ -@am__fastdepCC_TRUE@ fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` - -.c.lo: -@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ -@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ -@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \ -@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ -@am__fastdepCC_TRUE@ fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man3dir = $(mandir)/man3 -install-man3: $(man3_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man3dir) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \ - done -uninstall-man3: - @$(NORMAL_UNINSTALL) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \ - rm -f $(DESTDIR)$(man3dir)/$$inst; \ - done - -man5dir = $(mandir)/man5 -install-man5: $(man5_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man5dir) - @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.5*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 5*) ;; \ - *) ext='5' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \ - done -uninstall-man5: - @$(NORMAL_UNINSTALL) - @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.5*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 5*) ;; \ - *) ext='5' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \ - rm -f $(DESTDIR)$(man5dir)/$$inst; \ - done -includeHEADERS_INSTALL = $(INSTALL_HEADER) -install-includeHEADERS: $(include_HEADERS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(includedir) - @list='$(include_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ - $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ - done - -uninstall-includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ - rm -f $(DESTDIR)$(includedir)/$$f; \ - done -pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER) -install-pkgincludeHEADERS: $(pkginclude_HEADERS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(pkgincludedir) - @list='$(pkginclude_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f"; \ - $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f; \ - done - -uninstall-pkgincludeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(pkginclude_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(pkgincludedir)/$$f"; \ - rm -f $(DESTDIR)$(pkgincludedir)/$$f; \ - done - -ETAGS = etags -ETAGSFLAGS = - -CTAGS = ctags -CTAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; \ - srcdir=$(srcdir); export srcdir; \ - list='$(TESTS)'; \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *" $$tst "*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - echo "XPASS: $$tst"; \ - ;; \ - *) \ - echo "PASS: $$tst"; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *" $$tst "*) \ - xfail=`expr $$xfail + 1`; \ - echo "XFAIL: $$tst"; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - echo "FAIL: $$tst"; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - echo "SKIP: $$tst"; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all tests failed"; \ - else \ - banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - skipped="($$skip tests were not run)"; \ - test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - test -n "$$skipped" && echo "$$skipped"; \ - test -n "$$report" && echo "$$report"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - else :; fi -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = . -distdir = $(PACKAGE)-$(VERSION) - -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } - -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print - -distdir: $(DISTFILES) - $(am__remove_distdir) - mkdir $(distdir) - $(mkinstalldirs) $(distdir)/${srcdir}/contrib/gregbook $(distdir)/${srcdir}/contrib/msvctest $(distdir)/${srcdir}/contrib/pngminus $(distdir)/${srcdir}/contrib/pngsuite $(distdir)/${srcdir}/contrib/visupng $(distdir)/${srcdir}/projects $(distdir)/${srcdir}/projects/beos $(distdir)/${srcdir}/projects/borland $(distdir)/${srcdir}/projects/msvc $(distdir)/${srcdir}/scripts - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - $(am__remove_distdir) - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ - && rm -f $(distdir).tar.gz \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @echo "$(distdir).tar.gz is ready for distribution" | \ - sed 'h;s/./=/g;p;x;p;x' -distuninstallcheck: - cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(MANS) $(HEADERS) config.h - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(man3dir) $(DESTDIR)$(man5dir) $(DESTDIR)$(includedir) $(DESTDIR)$(pkgincludedir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ - clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-hdr distclean-libtool \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-includeHEADERS install-man \ - install-pkgincludeHEADERS - -install-exec-am: install-binSCRIPTS install-libLTLIBRARIES - -install-info: install-info-am - -install-man: install-man3 install-man5 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf autom4te.cache -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \ - uninstall-info-am uninstall-libLTLIBRARIES uninstall-local \ - uninstall-man uninstall-pkgincludeHEADERS - -uninstall-man: uninstall-man3 uninstall-man5 - -.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ - clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ - clean-libtool ctags dist dist-all dist-gzip distcheck distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-hdr distclean-libtool distclean-tags distcleancheck \ - distdir distuninstallcheck dvi dvi-am info info-am install \ - install-am install-binSCRIPTS install-data install-data-am \ - install-data-local install-exec install-exec-am \ - install-includeHEADERS install-info install-info-am \ - install-libLTLIBRARIES install-man install-man3 install-man5 \ - install-pkgincludeHEADERS install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-binSCRIPTS \ - uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES uninstall-local uninstall-man \ - uninstall-man3 uninstall-man5 uninstall-pkgincludeHEADERS - - -libpng.pc: - cat ${srcdir}/scripts/libpng.pc.in | \ - sed -e 's,[@]PREFIX[@],$(prefix),' -e 's,[@]INCLUDEDIR[@],$(includedir),' > libpng.pc - -libpng12.pc: libpng.pc - cp libpng.pc libpng12.pc - -install-data-local: libpng.pc libpng12.pc - @INSTALL@ -d @PKGCONFIGDIR@ - @INSTALL_DATA@ libpng.pc @PKGCONFIGDIR@ - @INSTALL_DATA@ libpng12.pc @PKGCONFIGDIR@ - -uninstall-local: - rm -f @PKGCONFIGDIR@/libpng.pc - rm -f @PKGCONFIGDIR@/libpng12.pc - -libpng-config: - ( cat ${srcdir}/scripts/libpng-config-head.in; \ - echo prefix=\"$(prefix)\"; \ - echo I_opts=\"-I$(includedir)\"; \ - echo L_opts=\"-L$(libdir)\"; \ - echo R_opts=\"-Wl,-rpath,$(libdir)\"; \ - echo libs=\"-lpng12 -lz -lm\"; \ - cat ${srcdir}/scripts/libpng-config-body.in ) > libpng-config - -libpng12-config: libpng-config - cp libpng-config libpng12-config -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/README b/README index 037f32888..5fe7b67b2 100644 --- a/README +++ b/README @@ -1,4 +1,4 @@ -README for libpng version 1.2.6 - August 15, 2004 (shared library 12.0) +README for libpng version 1.2.7beta1 - August 26, 2004 (shared library 12.0) See the note about version numbers near the top of png.h See INSTALL for instructions on how to install libpng. @@ -77,16 +77,15 @@ compression library that is useful for more things than just PNG files. You can use zlib as a drop-in replacement for fread() and fwrite() if you are so inclined. -zlib should be available at the same place that libpng is. -If not, it should be at ftp.uu.net in /graphics/png -Eventually, it will be at ftp.uu.net in /pub/archiving/zip/zlib +zlib should be available at the same place that libpng is, or at. +ftp://ftp.info-zip.org/pub/infozip/zlib You may also want a copy of the PNG specification. It is available -as an RFC and a W3C Recommendation. Failing -these resources you can try ftp.uu.net in the /graphics/png directory. +as an RFC, a W3C Recommendation, and an ISO/IEC Standard. You can find +these at http://www.libpng.org/pub/png/documents/ -This code is currently being archived at ftp.uu.net in the -/graphics/png directory, and on CompuServe, Lib 20 (PNG SUPPORT) +This code is currently being archived at libpng.sf.net in the +[DOWNLOAD] area, and on CompuServe, Lib 20 (PNG SUPPORT) at GO GRAPHSUP. If you can't find it in any of those places, e-mail me, and I'll help you find it. @@ -122,10 +121,10 @@ and ...". If in doubt, send questions to me. I'll bounce them to others, if necessary. Please do not send suggestions on how to change PNG. We have -been discussing PNG for three years now, and it is official and +been discussing PNG for nine years now, and it is official and finished. If you have suggestions for libpng, however, I'll -gladly listen. Even if your suggestion is not used for version -1.0, it may be used later. +gladly listen. Even if your suggestion is not used immediately, +it may be used later. Files in this distribution: @@ -173,9 +172,9 @@ Files in this distribution: visupng => Contains a MSVC workspace for VisualPng projects => Contains project files and workspaces for building DLL beos => Contains a Beos workspace for building libpng - borland => Contains a Borland workspace for building libpng + c5builder => Contains a Borland workspace for building libpng and zlib - msvc => Contains a Microsoft Visual C++ (MSVC) workspace + visualc6 => Contains a Microsoft Visual C++ (MSVC) workspace for building libpng and zlib netware.txt => Contains instructions for downloading a set of project files for building libpng and zlib on @@ -187,10 +186,10 @@ Files in this distribution: descrip.mms => VMS makefile for MMS or MMK makefile.std => Generic UNIX makefile (cc, creates static libpng.a) makefile.linux => Linux/ELF makefile - (gcc, creates libpng12.so.0.1.2.5) - makefile.gcmmx => Linux/ELF makefile (gcc, creates - libpng12.so.0.1.2.5, uses assembler code - tuned for Intel MMX platform) + (gcc, creates libpng12.so.0.1.2.7beta1) + makefile.gcmmx => Linux/ELF makefile + (gcc, creates libpng12.so.0.1.2.7beta1, + uses assembler code tuned for Intel MMX platform) makefile.gcc => Generic makefile (gcc, creates static libpng.a) makefile.knr => Archaic UNIX Makefile that converts files with ansi2knr (Requires ansi2knr.c from @@ -205,17 +204,17 @@ Files in this distribution: makefile.ibmc => IBM C/C++ version 3.x for Win32 and OS/2 (static) makefile.intel => Intel C/C++ version 4.0 and later libpng.icc => Project file, IBM VisualAge/C++ 4.0 or later - makefile.macosx => MACOS X Makefile makefile.netbsd => NetBSD/cc makefile, PNGGCCRD, makes libpng.so. - makefile.ne0bsd => NetBSD/cc makefile, PNGGCCRD, makes libpng0.so + makefile.ne0bsd => NetBSD/cc makefile, PNGGCCRD, makes libpng0.so makefile.openbsd => OpenBSD makefile makefile.sgi => Silicon Graphics IRIX (cc, creates static lib) - makefile.sggcc => Silicon Graphics (gcc, creates libpng12.so.0.1.2.5) + makefile.sggcc => Silicon Graphics + (gcc, creates libpng12.so.0.1.2.7beta1) makefile.sunos => Sun makefile makefile.solaris => Solaris 2.X makefile - (gcc, creates libpng12.so.0.1.2.5) + (gcc, creates libpng12.so.0.1.2.7beta1) makefile.so9 => Solaris 9 makefile - (gcc, creates libpng12.so.0.1.2.5) + (gcc, creates libpng12.so.0.1.2.7beta1) makefile.32sunu => Sun Ultra 32-bit makefile makefile.64sunu => Sun Ultra 64-bit makefile makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc @@ -233,7 +232,7 @@ Files in this distribution: makefile.tc3 => Turbo C 3.0 makefile makefile.dj2 => DJGPP 2 makefile makefile.msc => Microsoft C makefile - makefile.vcawin32 => makefile for Microsoft Visual C++ 5.0 and + makefile.vcawin32=> makefile for Microsoft Visual C++ 5.0 and later (uses assembler code tuned for Intel MMX platform) makefile.vcwin32 => makefile for Microsoft Visual C++ 4.0 and @@ -244,26 +243,16 @@ Files in this distribution: makevms.com => VMS build script pngdef.pas => Defines for a png32bd.dll with Borland C++ 4.5 SCOPTIONS.ppc => Used with smakefile.ppc - mangle => Directory containing scripts to build libpng12m.so: - mangle.in => Function-decoration macros added to png.h by the - makefiles. - makefile.linux => Linux/ELF makefile - (gcc, creates libpng12m.so.0.1.2.5) - makefile.gcmmx => Linux/ELF makefile (gcc, creates - libpng12.so.0m.1.2.5, uses assembler code - tuned for Intel MMX platform) - makefile.sgi => Silicon Graphics (cc, creates libpng12m.so) - makefile.sggcc => Silicon Graphics (gcc, creates libpng12m.so) Good luck, and happy coding. --Glenn Randers-Pehrson - Internet: randeg@alum.rpi.edu +-Glenn Randers-Pehrson (current maintainer) + Internet: glennrp@users.sourceforge.net --Andreas Eric Dilger +-Andreas Eric Dilger (former maintainer, 1996-1997) Internet: adilger@enel.ucalgary.ca Web: http://www-mddsp.enel.ucalgary.ca/People/adilger/ --Guy Eric Schalnat +-Guy Eric Schalnat (original author and former maintainer, 1995-1996) (formerly of Group 42, Inc) Internet: gschal@infinet.com diff --git a/Y2KINFO b/Y2KINFO index e28bea10f..77d799ed7 100644 --- a/Y2KINFO +++ b/Y2KINFO @@ -1,13 +1,13 @@ Y2K compliance in libpng: ========================= - August 15, 2004 + August 26, 2004 Since the PNG Development group is an ad-hoc body, we can't make an official declaration. This is your unofficial assurance that libpng from version 0.71 and - upward through 1.2.6 are Y2K compliant. It is my belief that earlier + upward through 1.2.7beta1 are Y2K compliant. It is my belief that earlier versions were also Y2K compliant. Libpng only has three year fields. One is a 2-byte unsigned integer diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 78bb771fd..000000000 --- a/aclocal.m4 +++ /dev/null @@ -1,4445 +0,0 @@ -# generated automatically by aclocal 1.7.2 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# Do all the work for Automake. -*- Autoconf -*- - -# This macro actually does too much some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 8 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -AC_PREREQ([2.54]) - -# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow -# the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl - AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl - -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[_am_stamp_count=`expr ${_am_stamp_count-0} + 1` -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) - -# Copyright 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"]) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.7.2])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# -# Check to make sure that the build environment is sane. -# - -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# -*- Autoconf -*- - - -# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# AM_AUX_DIR_EXPAND - -# Copyright 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -# Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50]) - -AC_DEFUN([AM_AUX_DIR_EXPAND], [ -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. - -# Copyright 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# AM_PROG_INSTALL_STRIP - -# Copyright 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# serial 4 -*- Autoconf -*- - -# Copyright 1999, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c -o conftest.o conftest.c >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null -AC_SUBST([DEPDIR]) -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -#serial 2 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST(am__include) -AC_SUBST(am__quote) -AC_MSG_RESULT($_am_result) -rm -f confinc confmf -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 5 - -AC_PREREQ(2.52) - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) -fi])]) - -# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- - -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_PREREQ([2.52]) - -# serial 6 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - -# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- - -# serial 46 AC_PROG_LIBTOOL - -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -]) - -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([LT_AC_PROG_SED])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -_LT_AC_PROG_ECHO_BACKSLASH -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_RESTORE]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac - ;; - ]) -esac - -_LT_AC_LTCONFIG_HACK - -]) - -# AC_LIBTOOL_HEADER_ASSERT -# ------------------------ -AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], -[AC_CACHE_CHECK([whether $CC supports assert without backlinking], - [lt_cv_func_assert_works], - [case $host in - *-*-solaris*) - if test "$GCC" = yes && test "$with_gnu_ld" != yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) lt_cv_func_assert_works=no ;; - *) lt_cv_func_assert_works=yes ;; - esac - fi - ;; - esac]) - -if test "x$lt_cv_func_assert_works" = xyes; then - AC_CHECK_HEADERS(assert.h) -fi -])# AC_LIBTOOL_HEADER_ASSERT - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h) -])# _LT_AC_CHECK_DLFCN - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AC_FD_CC - fi - else - echo "cannot find nm_test_var in $nlist" >&AC_FD_CC - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi - else - echo "$progname: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - -# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR -# --------------------------------- -AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], -[# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi -])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[if test "$cross_compiling" = yes; then : - [$4] -else - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - -AC_DEFUN([_LT_AC_LTCONFIG_HACK], -[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" - -AC_MSG_CHECKING([for objdir]) -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -AC_MSG_RESULT($objdir) - - -AC_ARG_WITH(pic, -[ --with-pic try to use only PIC/non-PIC objects [default=use both]], -pic_mode="$withval", pic_mode=default) -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -AC_MSG_CHECKING([for $compiler option to produce PIC]) -AC_CACHE_VAL(lt_cv_prog_cc_pic, -[ lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6* | nonstopux*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi -]) -if test -z "$lt_cv_prog_cc_pic"; then - AC_MSG_RESULT([none]) -else - AC_MSG_RESULT([$lt_cv_prog_cc_pic]) - - # Check to make sure the pic_flag actually works. - AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) - AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - AC_TRY_COMPILE([], [], [dnl - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - ], [dnl - lt_cv_prog_cc_pic_works=no - ]) - CFLAGS="$save_CFLAGS" - ]) - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) - lt_cv_prog_cc_can_build_shared=no - fi -fi - -AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) -AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) - LDFLAGS="$save_LDFLAGS" -]) - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) -AC_CACHE_VAL([lt_cv_compiler_c_o], [ -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&AC_FD_CC - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null -]) -compiler_c_o=$lt_cv_compiler_c_o -AC_MSG_RESULT([$compiler_c_o]) - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) - AC_CACHE_VAL([lt_cv_compiler_o_lo], [ - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - ]) - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - ]) - compiler_o_lo=$lt_cv_compiler_o_lo - AC_MSG_RESULT([$compiler_o_lo]) -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - ]) - CFLAGS="$save_CFLAGS" - AC_MSG_RESULT([$compiler_rtti_exceptions]) - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -AC_MSG_RESULT([$ld_shlibs]) -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -AC_MSG_CHECKING([how to hardcode library paths into programs]) -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -AC_MSG_RESULT([$hardcode_action]) - -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - hardcode_into_libs=yes - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU/FreeBSD ld.so' - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - need_lib_prefix=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - hardcode_into_libs=yes - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -AC_LIBTOOL_DLOPEN_SELF - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], - [$rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile); then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi]) - AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS SED \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="${SED} -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - -])# _LT_AC_LTCONFIG_HACK - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_LIBTOOL_PICMODE - implement the --with-pic flag -# Usage: AC_LIBTOOL_PICMODE[(MODE)] -# Where MODE is either `yes' or `no'. If omitted, it defaults to -# `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default)]) - - -# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -]) - - -# AC_PATH_MAGIC - find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl -AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) - else - MAGIC_CMD=: - fi -fi -]) - - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | [[A-Za-z]]:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) - -# AC_PROG_LD_GNU - -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -]) - -# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, -[lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" -]) - -# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[[78]]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -]) - - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and LTDLINCL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and LTDLINCL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and LTDLINCL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -]) - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_executable_p="test -f" -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" - fi - done - done -done - - # Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 40000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" -]) -if test "X$SED" != "X"; then - lt_cv_path_SED=$SED -else - SED=$lt_cv_path_SED -fi -AC_MSG_RESULT([$SED]) -]) - diff --git a/autogen.sh b/autogen.sh deleted file mode 100755 index e7f1dfeec..000000000 --- a/autogen.sh +++ /dev/null @@ -1,5 +0,0 @@ -#! /bin/sh -# a quick hack script to generate necessary files from -# auto* tools. - -libtoolize -c -f && aclocal && autoheader && automake --foreign -a -c && autoconf diff --git a/config.guess b/config.guess deleted file mode 100755 index 9b1384be4..000000000 --- a/config.guess +++ /dev/null @@ -1,1400 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. - -timestamp='2002-11-30' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# This shell variable is my proudest work .. or something. --bje - -set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ; -(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old) - || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ; -dummy=$tmpdir/dummy ; -files="$dummy.c $dummy.o $dummy.rel $dummy" ; -trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - rm -f $files ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; -unset files' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - eval $set_cc_for_build - cat <$dummy.s - .data -\$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main -main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - $CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null - if test "$?" = 0 ; then - case `$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - 2-1307) - UNAME_MACHINE="alphaev68" - ;; - 3-1307) - UNAME_MACHINE="alphaev7" - ;; - esac - fi - rm -f $dummy.s $dummy && rmdir $tmpdir - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit 0;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 - rm -f $dummy.c $dummy && rmdir $tmpdir - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit 0 ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit 0 ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 - rm -f $dummy.c $dummy && rmdir $tmpdir - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi - rm -f $dummy.c $dummy && rmdir $tmpdir - fi ;; - esac - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 - rm -f $dummy.c $dummy && rmdir $tmpdir - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3D:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - # Determine whether the default compiler uses glibc. - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #if __GLIBC__ >= 2 - LIBC=gnu - #else - LIBC= - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - rm -f $dummy.c && rmdir $tmpdir - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} - exit 0 ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; - x86:Interix*:3*) - echo i586-pc-interix3 - exit 0 ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit 0 ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit 0 ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; - arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - rm -f $dummy.c && rmdir $tmpdir - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - rm -f $dummy.c && rmdir $tmpdir - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 - ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit 0 ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit 0 ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit 0 ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit 0 ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit 0 ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit 0 ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - rm -f $dummy.c && rmdir $tmpdir - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit 0 ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit 0 ;; - i*86:*:5:[78]*) - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit 0 ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit 0 ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit 0 ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit 0 ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit 0 ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Darwin:*:*) - echo `uname -p`-apple-darwin${UNAME_RELEASE} - exit 0 ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit 0 ;; - NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit 0 ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit 0 ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit 0 ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit 0 ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit 0 ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit 0 ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit 0 ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 -rm -f $dummy.c $dummy && rmdir $tmpdir - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/config.h.in b/config.h.in deleted file mode 100644 index 8e8261292..000000000 --- a/config.h.in +++ /dev/null @@ -1,92 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_FCNTL_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the `m' library (-lm). */ -#undef HAVE_LIBM - -/* Define to 1 if you have the `z' library (-lz). */ -#undef HAVE_LIBZ - -/* Define to 1 if your system has a GNU libc compatible `malloc' function, and - to 0 otherwise. */ -#undef HAVE_MALLOC - -/* Define to 1 if you have the header file. */ -#undef HAVE_MALLOC_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the `memset' function. */ -#undef HAVE_MEMSET - -/* Define to 1 if you have the `pow' function. */ -#undef HAVE_POW - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strrchr' function. */ -#undef HAVE_STRRCHR - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define to 1 if your declares `struct tm'. */ -#undef TM_IN_SYS_TIME - -/* Version number of package */ -#undef VERSION - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to rpl_malloc if the replacement function should be used. */ -#undef malloc - -/* Define to `unsigned' if does not define. */ -#undef size_t diff --git a/config.sub b/config.sub deleted file mode 100755 index f0675aa6b..000000000 --- a/config.sub +++ /dev/null @@ -1,1469 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. - -timestamp='2002-11-30' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit 0;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k \ - | m32r | m68000 | m68k | m88k | mcore \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mipsisa32 | mipsisa32el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | ns16k | ns32k \ - | openrisc | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ - | strongarm \ - | tahoe | thumb | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xscale | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ - | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \ - | clipper-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* \ - | m32r-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39 | mipstx39el \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ - | xtensa-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - or32 | or32-*) - basic_machine=or32-unknown - os=-coff - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2) - basic_machine=i686-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3d) - basic_machine=alpha-cray - os=-unicos - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic4x | c4x*) - basic_machine=tic4x-unknown - os=-coff - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele) - basic_machine=sh-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv9 | sparcv9b) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/configure b/configure index a4c2a756d..1f168ac08 100755 --- a/configure +++ b/configure @@ -1,10612 +1,13 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.57 for libpng 1.2.6-automake. -# -# Report bugs to . -# -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME='libpng' -PACKAGE_TARNAME='libpng' -PACKAGE_VERSION='1.2.6-automake' -PACKAGE_STRING='libpng 1.2.6-automake' -PACKAGE_BUGREPORT='png-implement@ccrc.wustl.edu' - -ac_unique_file="pngget.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os LN_S ECHO RANLIB ac_ct_RANLIB CPP EGREP LIBTOOL LIBOBJS POW_LIB PKGCONFIGDIR LIBPNG12_VERSION_INFO LIBPNG3_VERSION_INFO LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures libpng 1.2.6-automake to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -X features: - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of libpng 1.2.6-automake:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=yes - --enable-fast-install=PKGS optimize for fast installation default=yes - --disable-libtool-lock avoid locking (might break parallel builds) - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-pic try to use only PIC/non-PIC objects default=use both - --with-x use the X Window System - --with-pkgconfigdir Use the specified pkgconfig dir (default is - prefix/lib/pkgconfig) - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF -libpng configure 1.2.6-automake -generated by GNU Autoconf 2.57 - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by libpng $as_me 1.2.6-automake, which was -generated by GNU Autoconf 2.57. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core core.* *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - - - -am__api_version="1.7" -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. -# By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed - - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AWK" && break -done - -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="$(MAKE)"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - - # test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE=libpng - VERSION=1.2.6-automake - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -install_sh=${install_sh-"$am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. - - - - - ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C compiler default output" >&5 -echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null - - - ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 -rm -f confinc confmf - -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" - -fi; -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - - -if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - - -depcc="$CC" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c -o conftest.o conftest.c >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - - -if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="$(MAKE)"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi; -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi; -# Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 -build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 -host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld - - -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" - -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi - -NM="$lt_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 - -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 -if test "${lt_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_executable_p="test -f" -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" - fi - done - done -done - - # Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 40000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" - -fi - -if test "X$SED" != "X"; then - lt_cv_path_SED=$SED -else - SED=$lt_cv_path_SED -fi -echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6 - -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 -fi - -echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 -echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[78]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; -esac - -fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method - - - - - - - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output" >&5 -echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris* | sysv5*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 -else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - - -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4610 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -lt_cv_cc_needs_belf=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - - -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$as_me:$LINENO: result: $objdir" >&5 -echo "${ECHO_T}$objdir" >&6 - - - -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_pic+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6* | nonstopux*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi - -fi - -if test -z "$lt_cv_prog_cc_pic"; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 -else - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 - - # Check to make sure the pic_flag actually works. - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 - if test "${lt_cv_prog_cc_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_prog_cc_pic_works=no - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - -fi - - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi - -echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_prog_cc_static_works=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi - - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:5139: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null - -fi - -compiler_c_o=$lt_cv_compiler_c_o -echo "$as_me:$LINENO: result: $compiler_c_o" >&5 -echo "${ECHO_T}$compiler_c_o" >&6 - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 - if test "${lt_cv_compiler_o_lo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - -fi - - compiler_o_lo=$lt_cv_compiler_o_lo - echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 -echo "${ECHO_T}$compiler_o_lo" >&6 -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$compiler_rtti_exceptions" >&6 - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [12].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - hardcode_into_libs=yes - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU/FreeBSD ld.so' - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - need_lib_prefix=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - hardcode_into_libs=yes - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - if test "${lt_cv_archive_cmds_need_lc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi -fi - - echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS SED \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="${SED} -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - -# Checks for header files. -echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6 - - -# Check whether --with-x or --without-x was given. -if test "${with_x+set}" = set; then - withval="$with_x" - -fi; -# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -if test "x$with_x" = xno; then - # The user explicitly disabled X. - have_x=disabled -else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - # Both variables are already set. - have_x=yes - else - if test "${ac_cv_have_x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # One or both of the vars are not set, and there is no cached value. -ac_x_includes=no ac_x_libraries=no -rm -fr conftest.dir -if mkdir conftest.dir; then - cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. - cat >Imakefile <<'_ACEOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case $ac_im_incroot in - /usr/include) ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac - case $ac_im_usrlibdir in - /usr/lib | /lib) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. - rm -fr conftest.dir -fi - -# Standard set of common directories for X headers. -# Check X11 before X11Rn because it is often a symlink to the current release. -ac_x_header_dirs=' -/usr/X11/include -/usr/X11R6/include -/usr/X11R5/include -/usr/X11R4/include - -/usr/include/X11 -/usr/include/X11R6 -/usr/include/X11R5 -/usr/include/X11R4 - -/usr/local/X11/include -/usr/local/X11R6/include -/usr/local/X11R5/include -/usr/local/X11R4/include - -/usr/local/include/X11 -/usr/local/include/X11R6 -/usr/local/include/X11R5 -/usr/local/include/X11R4 - -/usr/X386/include -/usr/x386/include -/usr/XFree86/include/X11 - -/usr/include -/usr/local/include -/usr/unsupported/include -/usr/athena/include -/usr/local/x11r5/include -/usr/lpp/Xamples/include - -/usr/openwin/include -/usr/openwin/share/include' - -if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Intrinsic.h. - # First, try using that file with no special directory specified. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # We can compile using X headers with no special include directory. -ac_x_includes= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Intrinsic.h"; then - ac_x_includes=$ac_dir - break - fi -done -fi -rm -f conftest.err conftest.$ac_ext -fi # $ac_x_includes = no - -if test "$ac_x_libraries" = no; then - # Check for the libraries. - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS=$LIBS - LIBS="-lXt $LIBS" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -XtMalloc (0) - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - LIBS=$ac_save_LIBS -# We can link X programs with no special library path. -ac_x_libraries= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -LIBS=$ac_save_LIBS -for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` -do - # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/libXt.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi # $ac_x_libraries = no - -if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" -else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi -fi - - fi - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6 - no_x=yes -else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 -fi - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - - - - - - - -for ac_header in fcntl.h malloc.h stdlib.h string.h strings.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Checks for typedefs, structures, and compiler characteristics. -echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 -echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 -if test "${ac_cv_c_const+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -/* FIXME: Include the comments suggested by Paul. */ -#ifndef __cplusplus - /* Ultrix mips cc rejects this. */ - typedef int charset[2]; - const charset x; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *ccp; - char **p; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - ccp = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++ccp; - p = (char**) ccp; - ccp = (char const *const *) p; - { /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - } -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_const=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_c_const=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 -echo "${ECHO_T}$ac_cv_c_const" >&6 -if test $ac_cv_c_const = no; then - -cat >>confdefs.h <<\_ACEOF -#define const -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for size_t" >&5 -echo $ECHO_N "checking for size_t... $ECHO_C" >&6 -if test "${ac_cv_type_size_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((size_t *) 0) - return 0; -if (sizeof (size_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_size_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_size_t=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -echo "${ECHO_T}$ac_cv_type_size_t" >&6 -if test $ac_cv_type_size_t = yes; then - : -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned -_ACEOF - -fi - -echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 -echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 -if test "${ac_cv_struct_tm+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include - -int -main () -{ -struct tm *tp; tp->tm_sec; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_struct_tm=time.h -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_struct_tm=sys/time.h -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 -echo "${ECHO_T}$ac_cv_struct_tm" >&6 -if test $ac_cv_struct_tm = sys/time.h; then - -cat >>confdefs.h <<\_ACEOF -#define TM_IN_SYS_TIME 1 -_ACEOF - -fi - - -# Checks for library functions. - -for ac_header in stdlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 -echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6 -if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_malloc_0_nonnull=no -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if STDC_HEADERS || HAVE_STDLIB_H -# include -#else -char *malloc (); -#endif - -int -main () -{ -exit (malloc (0) ? 0 : 1); - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_malloc_0_nonnull=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_malloc_0_nonnull=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 -echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6 -if test $ac_cv_func_malloc_0_nonnull = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 1 -_ACEOF - -else - cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 0 -_ACEOF - - LIBOBJS="$LIBOBJS malloc.$ac_objext" - -cat >>confdefs.h <<\_ACEOF -#define malloc rpl_malloc -_ACEOF - -fi - - - -echo "$as_me:$LINENO: checking for working strtod" >&5 -echo $ECHO_N "checking for working strtod... $ECHO_C" >&6 -if test "${ac_cv_func_strtod+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_strtod=no -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -double strtod (); -int -main() -{ - { - /* Some versions of Linux strtod mis-parse strings with leading '+'. */ - char *string = " +69"; - char *term; - double value; - value = strtod (string, &term); - if (value != 69 || term != (string + 4)) - exit (1); - } - - { - /* Under Solaris 2.4, strtod returns the wrong value for the - terminating character under some conditions. */ - char *string = "NaN"; - char *term; - strtod (string, &term); - if (term != string && *(term - 1) == 0) - exit (1); - } - exit (0); -} - -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_strtod=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_strtod=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_strtod" >&5 -echo "${ECHO_T}$ac_cv_func_strtod" >&6 -if test $ac_cv_func_strtod = no; then - LIBOBJS="$LIBOBJS strtod.$ac_objext" -echo "$as_me:$LINENO: checking for pow" >&5 -echo $ECHO_N "checking for pow... $ECHO_C" >&6 -if test "${ac_cv_func_pow+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char pow (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pow (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_pow) || defined (__stub___pow) -choke me -#else -char (*f) () = pow; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != pow; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_pow=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_pow=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_pow" >&5 -echo "${ECHO_T}$ac_cv_func_pow" >&6 - -if test $ac_cv_func_pow = no; then - echo "$as_me:$LINENO: checking for pow in -lm" >&5 -echo $ECHO_N "checking for pow in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_pow+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pow (); -int -main () -{ -pow (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_m_pow=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_m_pow=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_pow" >&5 -echo "${ECHO_T}$ac_cv_lib_m_pow" >&6 -if test $ac_cv_lib_m_pow = yes; then - POW_LIB=-lm -else - { echo "$as_me:$LINENO: WARNING: cannot find library containing definition of pow" >&5 -echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;} -fi - -fi - -fi - - - - - -for ac_func in memset pow strrchr -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -echo "$as_me:$LINENO: checking for sqrt" >&5 -echo $ECHO_N "checking for sqrt... $ECHO_C" >&6 -if test "${ac_cv_func_sqrt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char sqrt (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char sqrt (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_sqrt) || defined (__stub___sqrt) -choke me -#else -char (*f) () = sqrt; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != sqrt; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_sqrt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_sqrt=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_sqrt" >&5 -echo "${ECHO_T}$ac_cv_func_sqrt" >&6 -if test $ac_cv_func_sqrt = yes; then - : -else - -echo "$as_me:$LINENO: checking for sqrt in -lm" >&5 -echo $ECHO_N "checking for sqrt in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_sqrt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char sqrt (); -int -main () -{ -sqrt (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_m_sqrt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_m_sqrt=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_sqrt" >&5 -echo "${ECHO_T}$ac_cv_lib_m_sqrt" >&6 -if test $ac_cv_lib_m_sqrt = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -else - cannot find sqrt -fi - -fi - - -echo "$as_me:$LINENO: checking for zlibVersion in -lz" >&5 -echo $ECHO_N "checking for zlibVersion in -lz... $ECHO_C" >&6 -if test "${ac_cv_lib_z_zlibVersion+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char zlibVersion (); -int -main () -{ -zlibVersion (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_z_zlibVersion=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_z_zlibVersion=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_z_zlibVersion" >&5 -echo "${ECHO_T}$ac_cv_lib_z_zlibVersion" >&6 -if test $ac_cv_lib_z_zlibVersion = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - { { echo "$as_me:$LINENO: error: ZLib not installed" >&5 -echo "$as_me: error: ZLib not installed" >&2;} - { (exit 1); exit 1; }; } -fi - - - -# Check whether --with-pkgconfigdir or --without-pkgconfigdir was given. -if test "${with_pkgconfigdir+set}" = set; then - withval="$with_pkgconfigdir" - PKGCONFIGDIR=${withval} -else - PKGCONFIGDIR='${prefix}/lib/pkgconfig' -fi; - -echo "$as_me:$LINENO: checking pkgconfig directory" >&5 -echo $ECHO_N "checking pkgconfig directory... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $PKGCONFIGDIR" >&5 -echo "${ECHO_T}$PKGCONFIGDIR" >&6 - - -LIBPNG12_VERSION_INFO=0:0:0 - -LIBPNG3_VERSION_INFO=3:0:0 - - - ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by libpng $as_me 1.2.6-automake, which was -generated by GNU Autoconf 2.57. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -libpng config.status 1.2.6-automake -configured by $0, generated by GNU Autoconf 2.57, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS section. -# - -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CYGPATH_W@,$CYGPATH_W,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@AMTAR@,$AMTAR,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@LN_S@,$LN_S,;t t -s,@ECHO@,$ECHO,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@CPP@,$CPP,;t t -s,@EGREP@,$EGREP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@POW_LIB@,$POW_LIB,;t t -s,@PKGCONFIGDIR@,$PKGCONFIGDIR,;t t -s,@LIBPNG12_VERSION_INFO@,$LIBPNG12_VERSION_INFO,;t t -s,@LIBPNG3_VERSION_INFO@,$LIBPNG3_VERSION_INFO,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_HEADER section. -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -_ACEOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\_ACEOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -_ACEOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -_ACEOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null -do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines -echo ' fi # grep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs - -cat >>$CONFIG_STATUS <<\_ACEOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in - if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - rm -f $ac_file - mv $tmp/config.h $ac_file - fi - else - cat $tmp/config.h - rm -f $tmp/config.h - fi -_am_stamp_count=`expr ${_am_stamp_count-0} + 1` -echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || -$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X$ac_file : 'X\(//\)[^/]' \| \ - X$ac_file : 'X\(//\)$' \| \ - X$ac_file : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X$ac_file | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'`/stamp-h$_am_stamp_count -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - else - continue - fi - grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} - { (exit 1); exit 1; }; }; } - - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - esac -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi +#!/bin/sh +echo " + There is no \"configure\" script in this distribution of + libpng-1.2.7beta1. + + Instead, please copy the appropriate makefile for your system from the + \"scripts\" directory. Read the INSTALL file for more details. + + Update, July 2004: you can get a "configure" based distribution + from the libpng distribution sites. Download the file + libpng-1.2.7beta1-config.tar.gz +" diff --git a/configure.ac b/configure.ac deleted file mode 100644 index 554a9e357..000000000 --- a/configure.ac +++ /dev/null @@ -1,41 +0,0 @@ -# Process this file with autoconf to produce a configure script. -m4_define(PNGPKG_VERSION,[1.2.6-automake]) -AC_INIT([libpng], PNGPKG_VERSION, png-implement@ccrc.wustl.edu) -AM_INIT_AUTOMAKE([libpng], PNGPKG_VERSION) -AC_CONFIG_SRCDIR([pngget.c]) -AM_CONFIG_HEADER([config.h]) - -# Checks for programs. -AC_PROG_CC -AC_PROG_MAKE_SET -AC_PROG_LIBTOOL - -# Checks for header files. -AC_PATH_X -AC_HEADER_STDC -AC_CHECK_HEADERS([fcntl.h malloc.h stdlib.h string.h strings.h unistd.h]) - -# Checks for typedefs, structures, and compiler characteristics. -AC_C_CONST -AC_TYPE_SIZE_T -AC_STRUCT_TM - -# Checks for library functions. -AC_FUNC_MALLOC -AC_FUNC_STRTOD - -AC_CHECK_FUNCS([memset pow strrchr]) -AC_CHECK_FUNC(sqrt, , AC_CHECK_LIB(m, sqrt,, [cannot find sqrt])) -AC_CHECK_LIB(z, zlibVersion,, AC_ERROR([ZLib not installed])) - -AC_ARG_WITH(pkgconfigdir, AC_HELP_STRING([--with-pkgconfigdir],[Use the specified pkgconfig dir (default is prefix/lib/pkgconfig)]),[PKGCONFIGDIR=${withval}],[PKGCONFIGDIR='${prefix}/lib/pkgconfig']) - -AC_MSG_CHECKING([pkgconfig directory]) -AC_MSG_RESULT([$PKGCONFIGDIR]) -AC_SUBST([PKGCONFIGDIR]) - -AC_SUBST(LIBPNG12_VERSION_INFO,0:0:0) -AC_SUBST(LIBPNG3_VERSION_INFO,3:0:0) - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/depcomp b/depcomp deleted file mode 100755 index 807b991f4..000000000 --- a/depcomp +++ /dev/null @@ -1,423 +0,0 @@ -#! /bin/sh - -# depcomp - compile a program generating dependencies as side-effects -# Copyright 1999, 2000 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi -# `libtool' can also be set to `yes' or `no'. - -if test -z "$depfile"; then - base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` - dir=`echo "$object" | sed 's,/.*$,/,'` - if test "$dir" = "$object"; then - dir= - fi - # FIXME: should be _deps on DOS. - depfile="$dir.deps/$base" -fi - -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. This file always lives in the current directory. - # Also, the AIX compiler puts `$object:' at the start of each line; - # $object doesn't have directory information. - stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" - outname="$stripped.o" - if test "$libtool" = yes; then - "$@" -Wc,-M - else - "$@" -M - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - tmpdepfile1="$dir.libs/$base.lo.d" - tmpdepfile2="$dir.libs/$base.d" - "$@" -Wc,-MD - else - tmpdepfile1="$dir$base.o.d" - tmpdepfile2="$dir$base.d" - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - if test -f "$tmpdepfile1"; then - tmpdepfile="$tmpdepfile1" - else - tmpdepfile="$tmpdepfile2" - fi - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a space and a tab in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. We will use -o /dev/null later, - # however we can't do the remplacement now because - # `-o $object' might simply not be used - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # X makedepend - shift - cleared=no - for arg in "$@"; do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - -*) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - "$@" || exit $? - IFS=" " - for arg - do - case "$arg" in - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 diff --git a/install-sh b/install-sh deleted file mode 100755 index 36f96f3e0..000000000 --- a/install-sh +++ /dev/null @@ -1,276 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd=$cpprog - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "$0: no input file specified" >&2 - exit 1 -else - : -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d "$dst" ]; then - instcmd=: - chmodcmd="" - else - instcmd=$mkdirprog - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f "$src" ] || [ -d "$src" ] - then - : - else - echo "$0: $src does not exist" >&2 - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "$0: no destination specified" >&2 - exit 1 - else - : - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d "$dst" ] - then - dst=$dst/`basename "$src"` - else - : - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' - ' -IFS="${IFS-$defaultIFS}" - -oIFS=$IFS -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS=$oIFS - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp=$pathcomp$1 - shift - - if [ ! -d "$pathcomp" ] ; - then - $mkdirprog "$pathcomp" - else - : - fi - - pathcomp=$pathcomp/ -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd "$dst" && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename "$dst"` - else - dstfile=`basename "$dst" $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename "$dst"` - else - : - fi - -# Make a couple of temp file names in the proper directory. - - dsttmp=$dstdir/#inst.$$# - rmtmp=$dstdir/#rm.$$# - -# Trap to clean up temp files at exit. - - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 - -# Move or copy the file name to the temp name - - $doit $instcmd "$src" "$dsttmp" && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && - -# Now remove or move aside any old file at destination location. We try this -# two ways since rm can't unlink itself on some systems and the destination -# file might be busy for other reasons. In this case, the final cleanup -# might fail but the new file should still install successfully. - -{ - if [ -f "$dstdir/$dstfile" ] - then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || - $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || - { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi -} && - -# Now rename the file to the real destination. - - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - -fi && - -# The final little trick to "correctly" pass the exit status to the exit trap. - -{ - (exit 0); exit -} diff --git a/libpng.3 b/libpng.3 index e7fa62e6a..415b77653 100644 --- a/libpng.3 +++ b/libpng.3 @@ -1,6 +1,6 @@ -.TH LIBPNG 3 "August 15, 2004" +.TH LIBPNG 3 "August 26, 2004" .SH NAME -libpng \- Portable Network Graphics (PNG) Reference Library 1.2.6 +libpng \- Portable Network Graphics (PNG) Reference Library 1.2.7beta1 .SH SYNOPSIS \fI\fB @@ -773,7 +773,7 @@ Following is a copy of the libpng.txt file that accompanies libpng. .SH LIBPNG.TXT libpng.txt - A description on how to use and modify libpng - libpng version 1.2.6 - August 15, 2004 + libpng version 1.2.7beta1 - August 26, 2004 Updated and distributed by Glenn Randers-Pehrson Copyright (c) 1998-2004 Glenn Randers-Pehrson @@ -810,19 +810,23 @@ Libpng was written as a companion to the PNG specification, as a way of reducing the amount of time and effort it takes to support the PNG file format in application programs. -The PNG-1.2 specification is available at -and at . +The PNG specification (second edition), November 2003, is available as +a W3C Recommendation and as an ISO Standard (ISO/IEC 15948:2003 (E)) at + The PNG-1.0 specification is available -as RFC 2083 and as a +as RFC 2083 and as a W3C Recommendation . Some additional chunks are described in the special-purpose public chunks -documents at . +documents at . Other information about PNG, and the latest version of libpng, can be found at the PNG home -page, -and at . +page, . Most users will not have to modify the library significantly; advanced users may want to modify it more. All attempts were made to make it as @@ -855,7 +859,6 @@ same instance of a structure. Note: thread safety may be defeated by use of some of the MMX assembler code in pnggccrd.c, which is only compiled when the user defines PNG_THREAD_UNSAFE_OK. - .SH II. Structures There are two main structures that are important to libpng, png_struct @@ -1170,6 +1173,9 @@ then png_read_image(), and finally png_read_end(). (The final parameter of this call is not yet used. Someday it might point to transformation parameters required by some future input transform.) +You must use png_transforms and not call any png_set_transform() functions +when you use png_read_png(). + After you have called png_read_png(), you can retrieve the image data with @@ -2770,6 +2776,9 @@ then png_write_image(), and finally png_write_end(). (The final parameter of this call is not yet used. Someday it might point to transformation parameters required by some future output transform.) +You must use png_transforms and not call any png_set_transform() functions +when you use png_write_png(). + .SS The low-level write interface If you are going the low-level route instead, you are now ready to @@ -3581,7 +3590,8 @@ this version of libpng, but if you insert some they will be printed. %-%of optimized features, see contrib/gregbook/readpng2.c in the libpng %-%source-code distribution. %-% -.SH VI. MNG support +%-%.SH VII. MNG support +%+%.SH VI. MNG support The MNG specification (available at http://www.libpng.org/pub/mng) allows certain extensions to PNG for PNG images that are embedded in MNG datastreams. @@ -3606,7 +3616,8 @@ or any other MNG chunks; your application must provide its own support for them. You may wish to consider using libmng (available at http://www.libmng.com) instead. -.SH VII. Changes to Libpng from version 0.88 +%-%.SH VIII. Changes to Libpng from version 0.88 +%+%.SH VII. Changes to Libpng from version 0.88 It should be noted that versions of libpng later than 0.96 are not distributed by the original libpng author, Guy Schalnat, nor by @@ -3655,15 +3666,16 @@ application: png_uint_32 application_vn = PNG_LIBPNG_VER; -.SH VII. Y2K Compliance in libpng +%-%.SH IX. Y2K Compliance in libpng +%+%.SH VIII. Y2K Compliance in libpng -August 15, 2004 +August 26, 2004 Since the PNG Development group is an ad-hoc body, we can't make an official declaration. This is your unofficial assurance that libpng from version 0.71 and -upward through 1.2.6 are Y2K compliant. It is my belief that earlier +upward through 1.2.7beta1 are Y2K compliant. It is my belief that earlier versions were also Y2K compliant. Libpng only has three year fields. One is a 2-byte unsigned integer that @@ -3806,6 +3818,7 @@ the first widely used release: 1.2.6rc1-5 13 10206 12.so.0.1.2.6rc1-5 1.0.16 10 10016 10.so.0.1.0.16 1.2.6 13 10206 12.so.0.1.2.6 + 1.2.7beta1 13 10207 12.so.0.1.2.7beta1 Henceforth the source version will match the shared-library minor and patch numbers; the shared-library major version number will be @@ -3822,7 +3835,7 @@ libpngpf(3), png(5) .LP .IR libpng : .IP -ftp://ftp.uu.net/graphics/png +http://libpng.sourceforge.net (follow the [DOWNLOAD] link) http://www.libpng.org/pub/png .LP @@ -3832,8 +3845,6 @@ http://www.libpng.org/pub/png .I libpng or at .br -ftp://ftp.uu.net/pub/archiving/zip/zlib -.br ftp://ftp.info-zip.org/pub/infozip/zlib .LP @@ -3863,7 +3874,7 @@ possible without all of you. Thanks to Frank J. T. Wojcik for helping with the documentation. -Libpng version 1.2.6 - August 15, 2004: +Libpng version 1.2.7beta1 - August 26, 2004: Initially created in 1995 by Guy Eric Schalnat, then of Group 42, Inc. Currently maintained by Glenn Randers-Pehrson (glennrp@users.sourceforge.net). @@ -3880,7 +3891,7 @@ included in the libpng distribution, the latter shall prevail.) If you modify libpng you may insert additional notices immediately following this sentence. -libpng version 1.2.6, August 15, 2004, is +libpng version 1.2.6, August 26, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors @@ -3979,7 +3990,7 @@ certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp@users.sourceforge.net -August 15, 2004 +August 26, 2004 .\" end of man page diff --git a/libpng.txt b/libpng.txt index 0324715bb..b7f4688a3 100644 --- a/libpng.txt +++ b/libpng.txt @@ -1,6 +1,6 @@ libpng.txt - A description on how to use and modify libpng - libpng version 1.2.6 - August 15, 2004 + libpng version 1.2.7beta1 - August 26, 2004 Updated and distributed by Glenn Randers-Pehrson Copyright (c) 1998-2004 Glenn Randers-Pehrson @@ -37,19 +37,23 @@ Libpng was written as a companion to the PNG specification, as a way of reducing the amount of time and effort it takes to support the PNG file format in application programs. -The PNG-1.2 specification is available at -and at . +The PNG specification (second edition), November 2003, is available as +a W3C Recommendation and as an ISO Standard (ISO/IEC 15948:2003 (E)) at + The PNG-1.0 specification is available -as RFC 2083 and as a +as RFC 2083 and as a W3C Recommendation . Some additional chunks are described in the special-purpose public chunks -documents at . +documents at . Other information about PNG, and the latest version of libpng, can be found at the PNG home -page, -and at . +page, . Most users will not have to modify the library significantly; advanced users may want to modify it more. All attempts were made to make it as @@ -82,7 +86,6 @@ same instance of a structure. Note: thread safety may be defeated by use of some of the MMX assembler code in pnggccrd.c, which is only compiled when the user defines PNG_THREAD_UNSAFE_OK. - II. Structures There are two main structures that are important to libpng, png_struct @@ -397,6 +400,9 @@ then png_read_image(), and finally png_read_end(). (The final parameter of this call is not yet used. Someday it might point to transformation parameters required by some future input transform.) +You must use png_transforms and not call any png_set_transform() functions +when you use png_read_png(). + After you have called png_read_png(), you can retrieve the image data with @@ -1997,6 +2003,9 @@ then png_write_image(), and finally png_write_end(). (The final parameter of this call is not yet used. Someday it might point to transformation parameters required by some future output transform.) +You must use png_transforms and not call any png_set_transform() functions +when you use png_write_png(). + The low-level write interface If you are going the low-level route instead, you are now ready to @@ -2808,7 +2817,7 @@ For more extensive examples of runtime querying, enabling and disabling of optimized features, see contrib/gregbook/readpng2.c in the libpng source-code distribution. -VI. MNG support +VII. MNG support The MNG specification (available at http://www.libpng.org/pub/mng) allows certain extensions to PNG for PNG images that are embedded in MNG datastreams. @@ -2833,7 +2842,7 @@ or any other MNG chunks; your application must provide its own support for them. You may wish to consider using libmng (available at http://www.libmng.com) instead. -VII. Changes to Libpng from version 0.88 +VIII. Changes to Libpng from version 0.88 It should be noted that versions of libpng later than 0.96 are not distributed by the original libpng author, Guy Schalnat, nor by @@ -2882,15 +2891,15 @@ application: png_uint_32 application_vn = PNG_LIBPNG_VER; -VII. Y2K Compliance in libpng +IX. Y2K Compliance in libpng -August 15, 2004 +August 26, 2004 Since the PNG Development group is an ad-hoc body, we can't make an official declaration. This is your unofficial assurance that libpng from version 0.71 and -upward through 1.2.6 are Y2K compliant. It is my belief that earlier +upward through 1.2.7beta1 are Y2K compliant. It is my belief that earlier versions were also Y2K compliant. Libpng only has three year fields. One is a 2-byte unsigned integer that diff --git a/libpngpf.3 b/libpngpf.3 index d22e50b8b..33c3a36ff 100644 --- a/libpngpf.3 +++ b/libpngpf.3 @@ -1,6 +1,6 @@ -.TH LIBPNGPF 3 "August 15, 2004" +.TH LIBPNGPF 3 "August 26, 2004" .SH NAME -libpng \- Portable Network Graphics (PNG) Reference Library 1.2.6 +libpng \- Portable Network Graphics (PNG) Reference Library 1.2.7beta1 (private functions) .SH SYNOPSIS \fB\fB#include \fP\fP diff --git a/ltmain.sh b/ltmain.sh deleted file mode 100644 index 6fc690018..000000000 --- a/ltmain.sh +++ /dev/null @@ -1,5107 +0,0 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" - -# Parse our command line options once, thoroughly. -while test $# -gt 0 -do - arg="$1" - shift - - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 - ;; - - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --preserve-dup-deps) duplicate_deps="yes" ;; - - --quiet | --silent) - show=: - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case $nonopt in - *cc | *++ | gcc* | *-gcc* | g++* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - prev= - lastarg= - srcfile="$nonopt" - suppress_output= - - user_target=no - for arg - do - case $prev in - "") ;; - xcompiler) - # Aesthetically quote the previous argument. - prev= - lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - - case $arg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - # Accept any command-line options. - case $arg in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; - - -static) - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - - # Add the arguments to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - case $user_target in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $lastarg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - case $user_target in - set) - ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' - case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 - ;; - esac - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $libobj" - else - removelist="$libobj" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 - else - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $run ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - echo $srcfile > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test "$pic_mode" != no; then - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" - else - # Don't build PIC code - command="$base_compile $srcfile" - fi - if test "$build_old_libs" = yes; then - lo_libobj="$libobj" - dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$libobj"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - - if test -d "$dir"; then - $show "$rm $libobj" - $run $rm $libobj - else - $show "$mkdir $dir" - $run $mkdir $dir - status=$? - if test $status -ne 0 && test ! -d $dir; then - exit $status - fi - fi - fi - if test "$compiler_o_lo" = yes; then - output_obj="$libobj" - command="$command -o $output_obj" - elif test "$compiler_c_o" = yes; then - output_obj="$obj" - command="$command -o $output_obj" - fi - - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # If we have no pic_flag, then copy the object into place and finish. - if (test -z "$pic_flag" || test "$pic_mode" != default) && - test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi - - $show "$mv $libobj $obj" - if $run $mv $libobj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` - libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - # Now arrange that obj and lo_libobj become the same file - $show "(cd $xdir && $LN_S $baseobj $libobj)" - if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $run $rm "$lockfile" - fi - exit 0 - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Allow error messages only from the first compilation. - suppress_output=' >/dev/null 2>&1' - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then - # Don't build PIC code - command="$base_compile $srcfile" - else - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" - fi - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - output_obj="$obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed - if test x"$output_obj" != x"$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - fi - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $run $rm "$lockfile" - fi - - exit 0 - ;; - - # libtool link mode - link | relink) - modename="$modename: link" - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invokation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args="$nonopt" - compile_command="$nonopt" - finalize_command="$nonopt" - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - - avoid_version=no - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -all-static | -static) - if test "X$arg" = "X-all-static"; then - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - else - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - fi - build_libtool_libs=no - build_old_libs=yes - prefer_static_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test $# -gt 0; do - arg="$1" - shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n $prev - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit 1 - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | no/*-*-nonstopux*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - ;; - esac - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 - fi - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-mingw* | *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -static) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; - - *.lo | *.$objext) - # A library or standard object. - if test "$prev" = dlfiles; then - # This file was specified with -dlopen. - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $arg" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= - else - case $arg in - *.lo) libobjs="$libobjs $arg" ;; - *) objs="$objs $arg" ;; - esac - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done # argument parsing loop - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - # Create the object directory. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - - # Determine the type of output - case $output in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - case $linkmode in - lib) - passes="conv link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit 1 - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - for pass in $passes; do - if test $linkmode = prog; then - # Determine which files to process - case $pass in - dlopen) - libs="$dlfiles" - save_deplibs="$deplibs" # Collect dlpreopened libraries - deplibs= - ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - for deplib in $libs; do - lib= - found=no - case $deplib in - -l*) - if test $linkmode = oldlib && test $linkmode = obj; then - $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 - continue - fi - if test $pass = conv; then - deplibs="$deplib $deplibs" - continue - fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - # Search the libtool library - lib="$searchdir/lib${name}.la" - if test -f "$lib"; then - found=yes - break - fi - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - ;; # -l - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test $pass = conv && continue - newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - prog) - if test $pass = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test $pass = scan; then - deplibs="$deplib $deplibs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - ;; - *) - $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test $pass = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test $pass = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - if test "$deplibs_check_method" != pass_all; then - echo - echo "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not used here." - else - echo - echo "*** Warning: Linking the shared library $output against the" - echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - continue - ;; - prog) - if test $pass != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - if test $found = yes || test -f "$lib"; then : - else - $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit 1 - fi - - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test $linkmode = oldlib && test $linkmode = obj; }; then - # Add dl[pre]opened files of deplib - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test $pass = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - elif test $linkmode != prog && test $linkmode != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit 1 - fi - continue - fi # $pass = conv - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 - fi - - # This library was specified with -dlopen. - if test $pass = dlopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit 1 - fi - if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. - dlprefiles="$dlprefiles $lib" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - abs_ladir="$ladir" - fi - ;; - esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - - # This library was specified with -dlpreopen. - if test $pass = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit 1 - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test $linkmode = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" - fi - continue - fi - - if test $linkmode = prog && test $pass != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test - esac - # Need to link against all dependency_libs? - if test $linkalldeplibs = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # Link against this shared library - - if test "$linkmode,$pass" = "prog,link" || - { test $linkmode = lib && test $hardcode_into_libs = yes; }; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - if test $linkmode = prog; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - fi - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin*) - major=`expr $current - $age` - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - soname=`echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$extract_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$old_archive_from_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n $old_archive_from_expsyms_cmds - - if test $linkmode = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case "$libdir" in - [\/]*) - add_dir="-L$inst_prefix_dir$libdir $add_dir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test $linkmode = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test $linkmode = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case "$libdir" in - [\/]*) - add_dir="-L$inst_prefix_dir$libdir $add_dir" - ;; - esac - fi - add="-l$name" - fi - - if test $linkmode = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test $linkmode = prog; then - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - - # Try to link the static library - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - echo "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test $linkmode = lib; then - if test -n "$dependency_libs" && - { test $hardcode_into_libs != yes || test $build_old_libs = yes || - test $link_static = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test $link_all_deplibs != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - fi - ;; - esac - if grep "^installed=no" $deplib > /dev/null; then - path="-L$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi - path="-L$absdir" - fi - ;; - *) continue ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$deplibs $path" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test $pass = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test $pass != dlopen; then - test $pass != scan && dependency_libs="$newdependency_libs" - if test $pass != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - *) - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - if test "$pass" = "conv" && - { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then - libs="$deplibs" # reset libs - deplibs= - fi - done # for pass - if test $linkmode = prog; then - dlfiles="$newdlfiles" - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit 1 - else - echo - echo "*** Warning: Linking the shared library $output against the non-libtool" - echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test $# -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - libext=al - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" - - # Check that each of the things are valid numbers. - case $current in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case $revision in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case $age in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test $age -gt $current; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - irix | nonstopux) - major=`expr $current - $age + 1` - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test $loop != 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=.`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test $loop != 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - major=`expr $current - $age` - versuffix="-$major" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - verstring="0.0" - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring="" - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - fi - - if test "$mode" != relink; then - # Remove our outputs. - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` - done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test $hardcode_into_libs != yes || test $build_old_libs = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd*) - # Do not include libc due to us having libc/libc_r. - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test $build_libtool_need_lc = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for file magic test)" - else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a file magic. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check below in file_magic test - if eval echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for regex pattern test)" - else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a regex pattern. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test $allow_undefined = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test $hardcode_into_libs = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - test -z "$dlname" && dlname=$soname - - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) in case we are running --disable-static - for obj in $libobjs; do - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - if test ! -f $xdir/$oldobj; then - $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" - $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? - fi - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - save_deplibs="$deplibs" - for conv in $convenience; do - tmp_deplibs= - for test_deplib in $deplibs; do - if test "$test_deplib" != "$conv"; then - tmp_deplibs="$tmp_deplibs $test_deplib" - fi - done - deplibs="$tmp_deplibs" - done - eval cmds=\"$archive_cmds\" - deplibs="$save_deplibs" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit 0 - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case $output in - *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$libobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - $show "(cd $xdir && $LN_S $oldobj $baseobj)" - $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? - fi - - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - ;; - - prog) - case $host in - *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; - esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - ;; - esac - ;; - esac - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test $need_relink = no || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? - - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi - - exit $status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $run $rm $output - # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit 0 - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case $0 in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) exeext=.exe ;; - *) exeext= ;; - esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 ${SED} - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # win32 systems need to use the prog path for dll - # lookup to work - *-*-cygwin* | *-*-pw32*) - $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} -" - ;; - - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" - ;; - - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - # Ensure that we have .o objects in place in case we decided - # not to build a shared library, and have fallen back to building - # static libs even though --disable-static was passed! - for oldobj in $oldobjs; do - if test ! -f $oldobj; then - xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$oldobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` - obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - $show "(cd $xdir && ${LN_S} $obj $baseobj)" - $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? - fi - done - - eval cmds=\"$old_archive_cmds\" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlfiles="$newdlfiles $libdir/$name" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlprefiles="$newdlprefiles $libdir/$name" - done - dlprefiles="$newdlprefiles" - fi - $rm $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test $need_relink = yes; then - $echo >> $output "\ -relink_command=\"$relink_command\"" - fi - done - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test $# -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - if test "$inst_prefix_dir" = "$destdir"; then - $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit 1 - fi - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"` - fi - - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit 1 - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test $# -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $wrapper ;; - *) . ./$wrapper ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $wrapper ;; - *) . ./$wrapper ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyways - case $install_prog,$host in - /usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $0 --finish$current_libdirs' - else - exit 0 - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = ":" && exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - rmdirs= - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$objdir" - else - objdir="$dir/$objdir" - fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test $mode = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test $mode = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - - if test $mode = uninstall; then - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test $? != 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test $? != 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - # FIXME: should reinstall the best remaining shared library. - fi - fi - ;; - - *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" - fi - ;; - - *) - # Do a test to see if this is a libtool program. - if test $mode = clean && - (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$file - - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - fi - ;; - esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 - done - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 - fi - done - - exit $exit_status - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - fi -fi # test -z "$show_help" - -if test -n "$exec_cmd"; then - eval exec $exec_cmd - exit 1 -fi - -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/missing b/missing deleted file mode 100755 index 6a37006e8..000000000 --- a/missing +++ /dev/null @@ -1,336 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing 0.4 - GNU automake" - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - - aclocal*) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the - proper tools for further handling them. - You can get \`$1Help2man' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then - # We have makeinfo, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - tar) - shift - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - fi - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 diff --git a/mkinstalldirs b/mkinstalldirs deleted file mode 100755 index d2d5f21b6..000000000 --- a/mkinstalldirs +++ /dev/null @@ -1,111 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Public domain - -errstatus=0 -dirmode="" - -usage="\ -Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" 1>&2 - exit 0 - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -case $dirmode in - '') - if mkdir -p -- . 2>/dev/null; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - fi - ;; - *) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - fi - ;; -esac - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# End: -# mkinstalldirs ends here diff --git a/png.5 b/png.5 index e9e9bc700..bc081564f 100644 --- a/png.5 +++ b/png.5 @@ -1,4 +1,4 @@ -.TH PNG 5 "August 15, 2004" +.TH PNG 5 "August 26, 2004" .SH NAME png \- Portable Network Graphics (PNG) format .SH DESCRIPTION @@ -20,12 +20,14 @@ platforms. .SH "SEE ALSO" .IR libpng(3), zlib(3), deflate(5), and zlib(5) .LP +PNG specification (second edition), November 2003: +.IP +.br + - * and as a W3C Recommendation + * is available as a W3C Recommendation and as an ISO Specification, + * flags & PNG_FLAG_ZLIB_CUSTOM_MEM_LEVEL)) png_ptr->zlib_mem_level = 8; if (!(png_ptr->flags & PNG_FLAG_ZLIB_CUSTOM_WINDOW_BITS)) - png_ptr->zlib_window_bits = 15; + { + if (png_ptr->rowbytes <= 16384 && png_ptr->height <= 16384) + { + png_uint_32 imagebytes = (png_ptr->rowbytes+1) * png_ptr->height; + png_uint_32 windowsize = 14; /* try for a smaller window */ + while ((1U << windowsize) >= imagebytes && windowsize > 7) + --windowsize; + png_ptr->zlib_window_bits = windowsize + 1; + } + else + png_ptr->zlib_window_bits = 15; + } if (!(png_ptr->flags & PNG_FLAG_ZLIB_CUSTOM_METHOD)) png_ptr->zlib_method = 8; deflateInit2(&png_ptr->zstream, png_ptr->zlib_level, @@ -602,45 +613,6 @@ png_write_IDAT(png_structp png_ptr, png_bytep data, png_size_t length) #endif png_debug(1, "in png_write_IDAT\n"); - /* Optimize the CMF field in the zlib stream. */ - /* This hack of the zlib stream is compliant to the stream specification. */ - if (!(png_ptr->mode & PNG_HAVE_IDAT) && - png_ptr->compression_type == PNG_COMPRESSION_TYPE_BASE) - { - unsigned int z_cmf = data[0]; /* zlib compression method and flags */ - if ((z_cmf & 0x0f) == 8 && (z_cmf & 0xf0) <= 0x70) - { - /* Avoid memory underflows and multiplication overflows. */ - /* The conditions below are practically always satisfied; - however, they still must be checked. */ - if (length >= 2 && - png_ptr->height < 16384 && png_ptr->width < 16384) - { - png_uint_32 uncompressed_idat_size = png_ptr->height * - (PNG_ROWBYTES(png_ptr->channels*png_ptr->bit_depth, - png_ptr->channels * png_ptr->bit_depth + 15) >> 3); - unsigned int z_cinfo = z_cmf >> 4; - unsigned int half_z_window_size = 1 << (z_cinfo + 7); - while (uncompressed_idat_size <= half_z_window_size && - half_z_window_size >= 256) - { - z_cinfo--; - half_z_window_size >>= 1; - } - z_cmf = (z_cmf & 0x0f) | (z_cinfo << 4); - if (data[0] != (png_byte)z_cmf) - { - data[0] = (png_byte)z_cmf; - data[1] &= 0xe0; - data[1] += (png_byte)(0x1f - ((z_cmf << 8) + data[1]) % 0x1f); - } - } - } - else - png_error(png_ptr, - "Invalid zlib compression method or flags in IDAT"); - } - png_write_chunk(png_ptr, (png_bytep)png_IDAT, data, length); png_ptr->mode |= PNG_HAVE_IDAT; } diff --git a/scripts/libpng-config-head.in b/scripts/libpng-config-head.in index 1e0766f38..30fe17d67 100755 --- a/scripts/libpng-config-head.in +++ b/scripts/libpng-config-head.in @@ -8,7 +8,7 @@ # Modeled after libxml-config. -version=1.2.6 +version=1.2.7beta1 prefix="" libdir="" libs="" diff --git a/scripts/libpng.pc.in b/scripts/libpng.pc.in index 4d4f0b732..10df7a20f 100644 --- a/scripts/libpng.pc.in +++ b/scripts/libpng.pc.in @@ -6,6 +6,6 @@ includedir=${exec_prefix}/include Name: libpng12 Description: Loads and saves PNG files -Version: 1.2.6 +Version: 1.2.7beta1 Libs: -L${libdir} -lpng12 -lz -lm Cflags: -I${includedir}/libpng12 diff --git a/scripts/makefile.32sunu b/scripts/makefile.32sunu index bda63ad7f..c560372c6 100644 --- a/scripts/makefile.32sunu +++ b/scripts/makefile.32sunu @@ -33,7 +33,7 @@ RANLIB=echo LIBNAME=libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) INCPATH=$(prefix)/include @@ -183,7 +183,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) $(SUN_CC_FLAGS) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -o pngtestd -L$(DL) -R$(DL) `$(BINPATH)/libpng12-config --ldflags` \ + $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/makefile.64sunu b/scripts/makefile.64sunu index 91ab35990..0bbbe9b1b 100644 --- a/scripts/makefile.64sunu +++ b/scripts/makefile.64sunu @@ -33,7 +33,7 @@ RANLIB=echo LIBNAME=libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) INCPATH=$(prefix)/include @@ -184,7 +184,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) $(SUN_CC_FLAGS) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -o pngtestd -L$(DL) -R$(DL) `$(BINPATH)/libpng12-config --ldflags` \ + $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/makefile.aix b/scripts/makefile.aix index 029ca44c0..0aa915cdf 100644 --- a/scripts/makefile.aix +++ b/scripts/makefile.aix @@ -18,7 +18,7 @@ RM = rm -f LIBNAME=libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) prefix=/usr/local diff --git a/scripts/makefile.beos b/scripts/makefile.beos index 73aff60ea..c9fc0e419 100644 --- a/scripts/makefile.beos +++ b/scripts/makefile.beos @@ -12,7 +12,7 @@ ZLIBLIB=/usr/local/lib ZLIBINC=/usr/local/include PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) ALIGN= @@ -165,7 +165,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) $(CFLAGS) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -W1,-rpath $(ZLIBLIB):$(DL) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: $(CC) $(CFLAGS) \ diff --git a/scripts/makefile.cygwin b/scripts/makefile.cygwin index a5fa3546c..b0e967511 100644 --- a/scripts/makefile.cygwin +++ b/scripts/makefile.cygwin @@ -79,7 +79,7 @@ CFLAGS= $(strip $(MINGW_CCFLAGS) $(addprefix -I,$(ZLIBINC)) \ LIBNAME = libpng12 PNGMAJ = 0 CYGDLL = 12 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) SHAREDLIB=cygpng$(CYGDLL).dll @@ -260,7 +260,17 @@ test-config-install: $(DB)/libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) $(CFLAGS) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: $(CC) $(CFLAGS) \ diff --git a/scripts/makefile.darwin b/scripts/makefile.darwin index 924eca2a4..330d7ccee 100644 --- a/scripts/makefile.darwin +++ b/scripts/makefile.darwin @@ -23,7 +23,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng12 -lz RANLIB=ranlib PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -167,7 +167,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: $(CC) $(CFLAGS) \ diff --git a/scripts/makefile.dec b/scripts/makefile.dec index ac37fae29..ca2fb0830 100644 --- a/scripts/makefile.dec +++ b/scripts/makefile.dec @@ -32,7 +32,7 @@ ZLIBLIB=../zlib ZLIBINC=../zlib PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -148,7 +148,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -w1 -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/makefile.gcmmx b/scripts/makefile.gcmmx index 2cb712513..29a8022f7 100644 --- a/scripts/makefile.gcmmx +++ b/scripts/makefile.gcmmx @@ -15,7 +15,7 @@ LIBNAME = libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) CC=gcc @@ -212,7 +212,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -W1, -rpath,$(DL) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: $(CC) -I$(ZLIBINC) \ diff --git a/scripts/makefile.hpgcc b/scripts/makefile.hpgcc index 03027156f..4ffacbdc0 100644 --- a/scripts/makefile.hpgcc +++ b/scripts/makefile.hpgcc @@ -41,7 +41,7 @@ RANLIB=ranlib #RANLIB=echo PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -176,7 +176,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -W1,-rpath,$(DL) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/makefile.hpux b/scripts/makefile.hpux index 6a8a2d7ac..403387c9e 100644 --- a/scripts/makefile.hpux +++ b/scripts/makefile.hpux @@ -24,7 +24,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm RANLIB=ranlib PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -162,7 +162,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) $(CCFLAGS) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/makefile.linux b/scripts/makefile.linux index 3eba565b0..8ac478a61 100644 --- a/scripts/makefile.linux +++ b/scripts/makefile.linux @@ -5,7 +5,7 @@ LIBNAME = libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) CC=gcc @@ -184,7 +184,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -W1, -rpath,$(DL) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: $(CC) -I$(ZLIBINC) \ diff --git a/scripts/makefile.ne12bsd b/scripts/makefile.ne12bsd index 48066969c..54ed006d5 100644 --- a/scripts/makefile.ne12bsd +++ b/scripts/makefile.ne12bsd @@ -13,7 +13,7 @@ INCSDIR=${LOCALBASE}/include/libpng12 LIB= png12 SHLIB_MAJOR= 0 -SHLIB_MINOR= 1.2.6 +SHLIB_MINOR= 1.2.7beta1 SRCS= pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ pngwtran.c pngmem.c pngerror.c pngpread.c diff --git a/scripts/makefile.netbsd b/scripts/makefile.netbsd index a70152672..8a16f58ba 100644 --- a/scripts/makefile.netbsd +++ b/scripts/makefile.netbsd @@ -13,7 +13,7 @@ INCSDIR=${LOCALBASE}/include/libpng LIB= png SHLIB_MAJOR= 3 -SHLIB_MINOR= 1.2.6 +SHLIB_MINOR= 1.2.7beta1 SRCS= pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ pngwtran.c pngmem.c pngerror.c pngpread.c diff --git a/scripts/makefile.openbsd b/scripts/makefile.openbsd index 80c6bd265..8f93502ad 100644 --- a/scripts/makefile.openbsd +++ b/scripts/makefile.openbsd @@ -7,7 +7,7 @@ LIBDIR= ${PREFIX}/lib MANDIR= ${PREFIX}/man/cat SHLIB_MAJOR= 0 -SHLIB_MINOR= 1.2.6 +SHLIB_MINOR= 1.2.7beta1 LIB= png SRCS= png.c pngerror.c pnggccrd.c pngget.c pngmem.c pngpread.c \ diff --git a/scripts/makefile.sco b/scripts/makefile.sco index 7a4dc4f77..0dc0320c5 100644 --- a/scripts/makefile.sco +++ b/scripts/makefile.sco @@ -24,7 +24,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng12 -lz -lm RANLIB=echo PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -162,7 +162,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) $(CFLAGS) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: $(CC) $(CFLAGS) \ diff --git a/scripts/makefile.sggcc b/scripts/makefile.sggcc index 9886476fd..8761fe4d7 100644 --- a/scripts/makefile.sggcc +++ b/scripts/makefile.sggcc @@ -18,7 +18,7 @@ ZLIBINC=../zlib LIBNAME=libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) CC=gcc @@ -169,14 +169,26 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):$(DL)\ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: echo echo Testing installed dynamic shared library. $(CC) -I$(ZLIBINC) \ `$(BINPATH)/libpng12-config --cflags` pngtest.c \ - -L$(ZLIBLIB) -rpath $(ZLIBLIB):`$(BINPATH)/libpng12-config --libdir` \ + -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):`$(BINPATH)/libpng12-config --libdir` \ -o pngtesti `$(BINPATH)/libpng12-config --ldflags` ./pngtesti pngtest.png diff --git a/scripts/makefile.sgi b/scripts/makefile.sgi index b972e55af..acf7799ff 100644 --- a/scripts/makefile.sgi +++ b/scripts/makefile.sgi @@ -5,7 +5,7 @@ LIBNAME=libpng12 PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) # Where make install puts libpng.a, libpng12.so, and libpng12/png.h @@ -175,14 +175,26 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):$(DL) \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` + ./pngtestd pngtest.png test-installed: echo echo Testing installed dynamic shared library. $(CC) -I$(ZLIBINC) \ `$(BINPATH)/libpng12-config --cflags` pngtest.c \ - -L$(ZLIBLIB) -rpath $(ZLIBLIB):`$(BINPATH)/libpng12-config --libdir` \ + -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):`$(BINPATH)/libpng12-config --libdir` \ -o pngtesti `$(BINPATH)/libpng12-config --ldflags` ./pngtesti pngtest.png diff --git a/scripts/makefile.so9 b/scripts/makefile.so9 index dd08212bd..feff9adb0 100644 --- a/scripts/makefile.so9 +++ b/scripts/makefile.so9 @@ -34,7 +34,7 @@ LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng12 -lz -lm RANLIB=echo PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -182,7 +182,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/makefile.solaris b/scripts/makefile.solaris index db2fc1cda..52a5d9a69 100644 --- a/scripts/makefile.solaris +++ b/scripts/makefile.solaris @@ -30,7 +30,7 @@ LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng12 -lz -lm RANLIB=echo PNGMAJ = 0 -PNGMIN = 1.2.6 +PNGMIN = 1.2.7beta1 PNGVER = $(PNGMAJ).$(PNGMIN) LIBNAME = libpng12 @@ -179,7 +179,17 @@ install-config: libpng-config install: install-static install-shared install-man install-config # If you installed in $(DESTDIR), test-installed won't work until you -# move the library to its final location. +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/libpng12-config --cflags` pngtest.c \ + -o pngtestd `$(BINPATH)/libpng12-config --ldflags` \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) + ./pngtestd pngtest.png test-installed: echo diff --git a/scripts/pngos2.def b/scripts/pngos2.def index bb21d979c..15d36e823 100644 --- a/scripts/pngos2.def +++ b/scripts/pngos2.def @@ -2,7 +2,7 @@ ; PNG.LIB module definition file for OS/2 ;---------------------------------------- -; Version 1.2.6 +; Version 1.2.7beta1 LIBRARY PNG DESCRIPTION "PNG image compression library for OS/2" diff --git a/scripts/pngw32.def b/scripts/pngw32.def index 0a174112b..f7bac62d4 100644 --- a/scripts/pngw32.def +++ b/scripts/pngw32.def @@ -6,7 +6,7 @@ LIBRARY DESCRIPTION "PNG image compression library for Windows" EXPORTS -;Version 1.2.6 +;Version 1.2.7beta1 png_build_grayscale_palette @1 png_check_sig @2 png_chunk_error @3 diff --git a/test-pngtest.sh b/test-pngtest.sh deleted file mode 100755 index c134a8a84..000000000 --- a/test-pngtest.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -./pngtest ${srcdir}/pngtest.png