diff --git a/INSTALL b/INSTALL index 781f760e0..2644c7a4f 100644 --- a/INSTALL +++ b/INSTALL @@ -1,27 +1,6 @@ Installing libpng -Contents - - I. Simple installation - II. Rebuilding the configure scripts - III. Using scripts/makefile* - IV. Using cmake - V. Directory structure - VI. Building with project files - VII. Building with makefiles -VIII. Configuring libpng for 16-bit platforms - IX. Configuring for DOS - X. Configuring for Medium Model - XI. Prepending a prefix to exported symbols - XII. Configuring for compiler xxx: -XIII. Removing unwanted object code - XIV. Changes to the build and configuration of libpng in libpng-1.5.x - XV. Configuring libpng for multiprocessing - XVI. Other sources of information about libpng: - -I. Simple installation - On Unix/Linux and similar systems, you can simply type ./configure [--prefix=/path] @@ -30,8 +9,6 @@ On Unix/Linux and similar systems, you can simply type and ignore the rest of this document. -II. Rebuilding the configure scripts - If configure does not work on your system, or if you have a need to change configure.ac or Makefile.am, and you have a reasonably up-to-date set of tools, running ./autogen.sh in a git clone before @@ -47,8 +24,6 @@ aren't using any of the included pre-built scripts, you can do this: make install make check -III. Using scripts/makefile* - Instead, you can use one of the custom-built makefiles in the "scripts" directory @@ -66,37 +41,19 @@ is not already on your system. zlib can usually be found wherever you got libpng. zlib can be placed in another directory, at the same level as libpng. -If your system already has a preinstalled zlib you will still need -to have access to the zlib.h and zconf.h include files that -correspond to the version of zlib that's installed. - -If you wish to test with a particular zlib that is not first in the -standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS, -and LD_LIBRARY_PATH in your environment before running "make test" -or "make distcheck": - -ZLIBLIB=/path/to/lib export ZLIBLIB -ZLIBINC=/path/to/include export ZLIBINC -CPPFLAGS="-I$ZLIBINC" export CPPFLAGS -LDFLAGS="-L$ZLIBLIB" export LDFLAGS -LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH - -If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC -in your environment and type "make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test". - -IV. Using cmake - If you want to use "cmake" (see www.cmake.org), type cmake . -DCMAKE_INSTALL_PREFIX=/path make make install -V. Directory structure +If your system already has a preinstalled zlib you will still need +to have access to the zlib.h and zconf.h include files that +correspond to the version of zlib that's installed. You can rename the directories that you downloaded (they -might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.8" -or "zlib128") so that you have directories called "zlib" and "libpng". +might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.5" +or "zlib125") so that you have directories called "zlib" and "libpng". Your directory structure should look like this: @@ -114,7 +71,6 @@ Your directory structure should look like this: depcomp, install-sh, mkinstalldirs, test-pngtest.sh contrib gregbook - libtests pngminim pngminus pngsuite @@ -139,8 +95,6 @@ If the line endings in the files look funny, you may wish to get the other distribution of libpng. It is available in both tar.gz (UNIX style line endings) and zip (DOS style line endings) formats. -VI. Building with project files - If you are building libpng with MSVC, you can enter the libpng projects\visualc6 or visualc71 directory and follow the instructions in README.txt. @@ -149,8 +103,6 @@ Otherwise enter the zlib directory and follow the instructions in zlib/README, then come back here and run "configure" or choose the appropriate makefile.sys in the scripts directory. -VII. Building with makefiles - Copy the file (or files) that you need from the scripts directory into this directory, for example @@ -178,189 +130,6 @@ do that, run "make install" in the zlib directory first if necessary). Some also allow you to run "make test-installed" after you have run "make install". -VIII. Configuring libpng for 16-bit platforms - -You will want to look into zconf.h to tell zlib (and thus libpng) that -it cannot allocate more then 64K at a time. Even if you can, the memory -won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. - -IX. Configuring for DOS - -For DOS users who only have access to the lower 640K, you will -have to limit zlib's memory usage via a png_set_compression_mem_level() -call. See zlib.h or zconf.h in the zlib library for more information. - -X. Configuring for Medium Model - -Libpng's support for medium model has been tested on most of the popular -compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets -defined, and FAR gets defined to far in pngconf.h, and you should be -all set. Everything in the library (except for zlib's structure) is -expecting far data. You must use the typedefs with the p or pp on -the end for pointers (or at least look at them and be careful). Make -note that the rows of data are defined as png_bytepp, which is -an "unsigned char far * far *". - -XI. Prepending a prefix to exported symbols - -Starting with libpng-1.6.0, you can configure libpng (when using the -"configure" script) to prefix all exported symbols by means of the -configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any -string beginning with a letter and containing only uppercase -and lowercase letters, digits, and the underscore (i.e., a C language -identifier). This creates a set of macros in pnglibconf.h, so this is -transparent to applications; their function calls get transformed by -the macros to use the modified names. - -XII. Configuring for compiler xxx: - -All includes for libpng are in pngconf.h. If you need to add, change -or delete an include, this is the place to do it. -The includes that are not needed outside libpng are placed in pngpriv.h, -which is only used by the routines inside libpng itself. -The files in libpng proper only include pngpriv.h and png.h, which -in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h. -As of libpng-1.5.0, pngpriv.h also includes three other private header -files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material -that previously appeared in the public headers. - -XIII. Removing unwanted object code - -There are a bunch of #define's in pngconf.h that control what parts of -libpng are compiled. All the defines end in _SUPPORTED. If you are -never going to use a capability, you can change the #define to #undef -before recompiling libpng and save yourself code and data space, or -you can turn off individual capabilities with defines that begin with -PNG_NO_. - -In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead. - -You can also turn all of the transforms and ancillary chunk capabilities -off en masse with compiler directives that define -PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, -or all four, along with directives to turn on any of the capabilities that -you do want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the -extra transformations but still leave the library fully capable of reading -and writing PNG files with all known public chunks. Use of the -PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library -that is incapable of reading or writing ancillary chunks. If you are -not using the progressive reading capability, you can turn that off -with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING -capability, which you'll still have). - -All the reading and writing specific code are in separate files, so the -linker should only grab the files it needs. However, if you want to -make sure, or if you are building a stand alone library, all the -reading files start with "pngr" and all the writing files start with "pngw". -The files that don't match either (like png.c, pngtrans.c, etc.) -are used for both reading and writing, and always need to be included. -The progressive reader is in pngpread.c - -If you are creating or distributing a dynamically linked library (a .so -or DLL file), you should not remove or disable any parts of the library, -as this will cause applications linked with different versions of the -library to fail if they call functions not available in your library. -The size of the library itself should not be an issue, because only -those sections that are actually used will be loaded into memory. - -XIV. Changes to the build and configuration of libpng in libpng-1.5.x - -Details of internal changes to the library code can be found in the CHANGES -file and in the GIT repository logs. These will be of no concern to the vast -majority of library users or builders; however, the few who configure libpng -to a non-default feature set may need to change how this is done. - -There should be no need for library builders to alter build scripts if -these use the distributed build support - configure or the makefiles - -however, users of the makefiles may care to update their build scripts -to build pnglibconf.h where the corresponding makefile does not do so. - -Building libpng with a non-default configuration has changed completely. -The old method using pngusr.h should still work correctly even though the -way pngusr.h is used in the build has been changed; however, library -builders will probably want to examine the changes to take advantage of -new capabilities and to simplify their build system. - -A. Specific changes to library configuration capabilities - -The exact mechanism used to control attributes of API functions has -changed. A single set of operating system independent macro definitions -is used and operating system specific directives are defined in -pnglibconf.h - -As part of this the mechanism used to choose procedure call standards on -those systems that allow a choice has been changed. At present this only -affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems -running on Intel processors. As before, PNGAPI is defined where required -to control the exported API functions; however, two new macros, PNGCBAPI -and PNGCAPI, are used instead for callback functions (PNGCBAPI) and -(PNGCAPI) for functions that must match a C library prototype (currently -only png_longjmp_ptr, which must match the C longjmp function.) The new -approach is documented in pngconf.h - -Despite these changes, libpng 1.5.0 only supports the native C function -calling standard on those platforms tested so far (__cdecl on Microsoft -Windows). This is because the support requirements for alternative -calling conventions seem to no longer exist. Developers who find it -necessary to set PNG_API_RULE to 1 should advise the mailing list -(png-mng-implement) of this and library builders who use Openwatcom and -therefore set PNG_API_RULE to 2 should also contact the mailing list. - -B. Changes to the configuration mechanism - -Prior to libpng-1.5.0 library builders who needed to configure libpng -had either to modify the exported pngconf.h header file to add system -specific configuration or had to write feature selection macros into -pngusr.h and cause this to be included into pngconf.h by defining -PNG_USER_CONFIG. The latter mechanism had the disadvantage that an -application built without PNG_USER_CONFIG defined would see the -unmodified, default, libpng API and thus would probably fail to link. - -These mechanisms still work in the configure build and in any makefile -build that builds pnglibconf.h, although the feature selection macros -have changed somewhat as described above. In 1.5.0, however, pngusr.h is -processed only once, when the exported header file pnglibconf.h is built. -pngconf.h no longer includes pngusr.h, therefore pngusr.h is ignored after the -build of pnglibconf.h and it is never included in an application build. - -The rarely used alternative of adding a list of feature macros to the -CPPFLAGS setting in the build also still works; however, the macros will be -copied to pnglibconf.h and this may produce macro redefinition warnings -when the individual C files are compiled. - -All configuration now only works if pnglibconf.h is built from -scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan -(the original author of awk) maintains C source code of that awk and this -and all known later implementations (often called by subtly different -names - nawk and gawk for example) are adequate to build pnglibconf.h. -The Sun Microsystems (now Oracle) program 'awk' is an earlier version -and does not work; this may also apply to other systems that have a -functioning awk called 'nawk'. - -Configuration options are now documented in scripts/pnglibconf.dfa. This -file also includes dependency information that ensures a configuration is -consistent; that is, if a feature is switched off dependent features are -also removed. As a recommended alternative to using feature macros in -pngusr.h a system builder may also define equivalent options in pngusr.dfa -(or, indeed, any file) and add that to the configuration by setting -DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate -how to do this, and a case where pngusr.h is still required. - -XV. Configuring libpng for multiprocessing - -Libpng uses setjmp()/longjmp() for error handling. Unfortunately setjmp() -is known to be not thread-safe on some platforms and we don't know of -any platform where it is guaranteed to be thread-safe. Therefore, if -your application is going to be using multiple threads, you should -configure libpng with PNG_NO_SETJMP in your pngusr.dfa file, with --DPNG_NO_SETJMP on your compile line, or with - - #undef PNG_SETJMP_SUPPORTED - -in your pnglibconf.h or pngusr.h. - -XVI. Other sources of information about libpng: - Further information can be found in the README and libpng-manual.txt files, in the individual makefiles, in png.h, and the manual pages libpng.3 and png.5.